1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * 4 * Copyright (C) 2011-2012 John Crispin <john@phrozen.org> 5 * Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG 6 */ 7 8 #include <linux/ioport.h> 9 #include <linux/export.h> 10 #include <linux/clkdev.h> 11 #include <linux/spinlock.h> 12 #include <linux/of.h> 13 #include <linux/of_address.h> 14 15 #include <lantiq_soc.h> 16 17 #include "../clk.h" 18 #include "../prom.h" 19 20 /* clock control register for legacy */ 21 #define CGU_IFCCR 0x0018 22 #define CGU_IFCCR_VR9 0x0024 23 /* system clock register for legacy */ 24 #define CGU_SYS 0x0010 25 /* pci control register */ 26 #define CGU_PCICR 0x0034 27 #define CGU_PCICR_VR9 0x0038 28 /* ephy configuration register */ 29 #define CGU_EPHY 0x10 30 31 /* Legacy PMU register for ar9, ase, danube */ 32 /* power control register */ 33 #define PMU_PWDCR 0x1C 34 /* power status register */ 35 #define PMU_PWDSR 0x20 36 /* power control register */ 37 #define PMU_PWDCR1 0x24 38 /* power status register */ 39 #define PMU_PWDSR1 0x28 40 /* power control register */ 41 #define PWDCR(x) ((x) ? (PMU_PWDCR1) : (PMU_PWDCR)) 42 /* power status register */ 43 #define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR)) 44 45 46 /* PMU register for ar10 and grx390 */ 47 48 /* First register set */ 49 #define PMU_CLK_SR 0x20 /* status */ 50 #define PMU_CLK_CR_A 0x24 /* Enable */ 51 #define PMU_CLK_CR_B 0x28 /* Disable */ 52 /* Second register set */ 53 #define PMU_CLK_SR1 0x30 /* status */ 54 #define PMU_CLK_CR1_A 0x34 /* Enable */ 55 #define PMU_CLK_CR1_B 0x38 /* Disable */ 56 /* Third register set */ 57 #define PMU_ANA_SR 0x40 /* status */ 58 #define PMU_ANA_CR_A 0x44 /* Enable */ 59 #define PMU_ANA_CR_B 0x48 /* Disable */ 60 61 /* Status */ 62 static u32 pmu_clk_sr[] = { 63 PMU_CLK_SR, 64 PMU_CLK_SR1, 65 PMU_ANA_SR, 66 }; 67 68 /* Enable */ 69 static u32 pmu_clk_cr_a[] = { 70 PMU_CLK_CR_A, 71 PMU_CLK_CR1_A, 72 PMU_ANA_CR_A, 73 }; 74 75 /* Disable */ 76 static u32 pmu_clk_cr_b[] = { 77 PMU_CLK_CR_B, 78 PMU_CLK_CR1_B, 79 PMU_ANA_CR_B, 80 }; 81 82 #define PWDCR_EN_XRX(x) (pmu_clk_cr_a[(x)]) 83 #define PWDCR_DIS_XRX(x) (pmu_clk_cr_b[(x)]) 84 #define PWDSR_XRX(x) (pmu_clk_sr[(x)]) 85 86 /* clock gates that we can en/disable */ 87 #define PMU_USB0_P BIT(0) 88 #define PMU_ASE_SDIO BIT(2) /* ASE special */ 89 #define PMU_PCI BIT(4) 90 #define PMU_DMA BIT(5) 91 #define PMU_USB0 BIT(6) 92 #define PMU_ASC0 BIT(7) 93 #define PMU_EPHY BIT(7) /* ase */ 94 #define PMU_USIF BIT(7) /* from vr9 until grx390 */ 95 #define PMU_SPI BIT(8) 96 #define PMU_DFE BIT(9) 97 #define PMU_EBU BIT(10) 98 #define PMU_STP BIT(11) 99 #define PMU_GPT BIT(12) 100 #define PMU_AHBS BIT(13) /* vr9 */ 101 #define PMU_FPI BIT(14) 102 #define PMU_AHBM BIT(15) 103 #define PMU_SDIO BIT(16) /* danube, ar9, vr9 */ 104 #define PMU_ASC1 BIT(17) 105 #define PMU_PPE_QSB BIT(18) 106 #define PMU_PPE_SLL01 BIT(19) 107 #define PMU_DEU BIT(20) 108 #define PMU_PPE_TC BIT(21) 109 #define PMU_PPE_EMA BIT(22) 110 #define PMU_PPE_DPLUM BIT(23) 111 #define PMU_PPE_DP BIT(23) 112 #define PMU_PPE_DPLUS BIT(24) 113 #define PMU_USB1_P BIT(26) 114 #define PMU_GPHY3 BIT(26) /* grx390 */ 115 #define PMU_USB1 BIT(27) 116 #define PMU_SWITCH BIT(28) 117 #define PMU_PPE_TOP BIT(29) 118 #define PMU_GPHY0 BIT(29) /* ar10, xrx390 */ 119 #define PMU_GPHY BIT(30) 120 #define PMU_GPHY1 BIT(30) /* ar10, xrx390 */ 121 #define PMU_PCIE_CLK BIT(31) 122 #define PMU_GPHY2 BIT(31) /* ar10, xrx390 */ 123 124 #define PMU1_PCIE_PHY BIT(0) /* vr9-specific,moved in ar10/grx390 */ 125 #define PMU1_PCIE_CTL BIT(1) 126 #define PMU1_PCIE_PDI BIT(4) 127 #define PMU1_PCIE_MSI BIT(5) 128 #define PMU1_CKE BIT(6) 129 #define PMU1_PCIE1_CTL BIT(17) 130 #define PMU1_PCIE1_PDI BIT(20) 131 #define PMU1_PCIE1_MSI BIT(21) 132 #define PMU1_PCIE2_CTL BIT(25) 133 #define PMU1_PCIE2_PDI BIT(26) 134 #define PMU1_PCIE2_MSI BIT(27) 135 136 #define PMU_ANALOG_USB0_P BIT(0) 137 #define PMU_ANALOG_USB1_P BIT(1) 138 #define PMU_ANALOG_PCIE0_P BIT(8) 139 #define PMU_ANALOG_PCIE1_P BIT(9) 140 #define PMU_ANALOG_PCIE2_P BIT(10) 141 #define PMU_ANALOG_DSL_AFE BIT(16) 142 #define PMU_ANALOG_DCDC_2V5 BIT(17) 143 #define PMU_ANALOG_DCDC_1VX BIT(18) 144 #define PMU_ANALOG_DCDC_1V0 BIT(19) 145 146 #define pmu_w32(x, y) ltq_w32((x), pmu_membase + (y)) 147 #define pmu_r32(x) ltq_r32(pmu_membase + (x)) 148 149 static void __iomem *pmu_membase; 150 void __iomem *ltq_cgu_membase; 151 void __iomem *ltq_ebu_membase; 152 153 static u32 ifccr = CGU_IFCCR; 154 static u32 pcicr = CGU_PCICR; 155 156 static DEFINE_SPINLOCK(g_pmu_lock); 157 158 /* legacy function kept alive to ease clkdev transition */ 159 void ltq_pmu_enable(unsigned int module) 160 { 161 int retry = 1000000; 162 163 spin_lock(&g_pmu_lock); 164 pmu_w32(pmu_r32(PMU_PWDCR) & ~module, PMU_PWDCR); 165 do {} while (--retry && (pmu_r32(PMU_PWDSR) & module)); 166 spin_unlock(&g_pmu_lock); 167 168 if (!retry) 169 panic("activating PMU module failed!"); 170 } 171 EXPORT_SYMBOL(ltq_pmu_enable); 172 173 /* legacy function kept alive to ease clkdev transition */ 174 void ltq_pmu_disable(unsigned int module) 175 { 176 int retry = 1000000; 177 178 spin_lock(&g_pmu_lock); 179 pmu_w32(pmu_r32(PMU_PWDCR) | module, PMU_PWDCR); 180 do {} while (--retry && (!(pmu_r32(PMU_PWDSR) & module))); 181 spin_unlock(&g_pmu_lock); 182 183 if (!retry) 184 pr_warn("deactivating PMU module failed!"); 185 } 186 EXPORT_SYMBOL(ltq_pmu_disable); 187 188 /* enable a hw clock */ 189 static int cgu_enable(struct clk *clk) 190 { 191 ltq_cgu_w32(ltq_cgu_r32(ifccr) | clk->bits, ifccr); 192 return 0; 193 } 194 195 /* disable a hw clock */ 196 static void cgu_disable(struct clk *clk) 197 { 198 ltq_cgu_w32(ltq_cgu_r32(ifccr) & ~clk->bits, ifccr); 199 } 200 201 /* enable a clock gate */ 202 static int pmu_enable(struct clk *clk) 203 { 204 int retry = 1000000; 205 206 if (of_machine_is_compatible("lantiq,ar10") 207 || of_machine_is_compatible("lantiq,grx390")) { 208 pmu_w32(clk->bits, PWDCR_EN_XRX(clk->module)); 209 do {} while (--retry && 210 (!(pmu_r32(PWDSR_XRX(clk->module)) & clk->bits))); 211 212 } else { 213 spin_lock(&g_pmu_lock); 214 pmu_w32(pmu_r32(PWDCR(clk->module)) & ~clk->bits, 215 PWDCR(clk->module)); 216 do {} while (--retry && 217 (pmu_r32(PWDSR(clk->module)) & clk->bits)); 218 spin_unlock(&g_pmu_lock); 219 } 220 221 if (!retry) 222 panic("activating PMU module failed!"); 223 224 return 0; 225 } 226 227 /* disable a clock gate */ 228 static void pmu_disable(struct clk *clk) 229 { 230 int retry = 1000000; 231 232 if (of_machine_is_compatible("lantiq,ar10") 233 || of_machine_is_compatible("lantiq,grx390")) { 234 pmu_w32(clk->bits, PWDCR_DIS_XRX(clk->module)); 235 do {} while (--retry && 236 (pmu_r32(PWDSR_XRX(clk->module)) & clk->bits)); 237 } else { 238 spin_lock(&g_pmu_lock); 239 pmu_w32(pmu_r32(PWDCR(clk->module)) | clk->bits, 240 PWDCR(clk->module)); 241 do {} while (--retry && 242 (!(pmu_r32(PWDSR(clk->module)) & clk->bits))); 243 spin_unlock(&g_pmu_lock); 244 } 245 246 if (!retry) 247 pr_warn("deactivating PMU module failed!"); 248 } 249 250 /* the pci enable helper */ 251 static int pci_enable(struct clk *clk) 252 { 253 unsigned int val = ltq_cgu_r32(ifccr); 254 /* set bus clock speed */ 255 if (of_machine_is_compatible("lantiq,ar9") || 256 of_machine_is_compatible("lantiq,vr9")) { 257 val &= ~0x1f00000; 258 if (clk->rate == CLOCK_33M) 259 val |= 0xe00000; 260 else 261 val |= 0x700000; /* 62.5M */ 262 } else { 263 val &= ~0xf00000; 264 if (clk->rate == CLOCK_33M) 265 val |= 0x800000; 266 else 267 val |= 0x400000; /* 62.5M */ 268 } 269 ltq_cgu_w32(val, ifccr); 270 pmu_enable(clk); 271 return 0; 272 } 273 274 /* enable the external clock as a source */ 275 static int pci_ext_enable(struct clk *clk) 276 { 277 ltq_cgu_w32(ltq_cgu_r32(ifccr) & ~(1 << 16), ifccr); 278 ltq_cgu_w32((1 << 30), pcicr); 279 return 0; 280 } 281 282 /* disable the external clock as a source */ 283 static void pci_ext_disable(struct clk *clk) 284 { 285 ltq_cgu_w32(ltq_cgu_r32(ifccr) | (1 << 16), ifccr); 286 ltq_cgu_w32((1 << 31) | (1 << 30), pcicr); 287 } 288 289 /* enable a clockout source */ 290 static int clkout_enable(struct clk *clk) 291 { 292 int i; 293 294 /* get the correct rate */ 295 for (i = 0; i < 4; i++) { 296 if (clk->rates[i] == clk->rate) { 297 int shift = 14 - (2 * clk->module); 298 int enable = 7 - clk->module; 299 unsigned int val = ltq_cgu_r32(ifccr); 300 301 val &= ~(3 << shift); 302 val |= i << shift; 303 val |= enable; 304 ltq_cgu_w32(val, ifccr); 305 return 0; 306 } 307 } 308 return -1; 309 } 310 311 /* manage the clock gates via PMU */ 312 static void clkdev_add_pmu(const char *dev, const char *con, bool deactivate, 313 unsigned int module, unsigned int bits) 314 { 315 struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); 316 317 if (!clk) 318 return; 319 clk->cl.dev_id = dev; 320 clk->cl.con_id = con; 321 clk->cl.clk = clk; 322 clk->enable = pmu_enable; 323 clk->disable = pmu_disable; 324 clk->module = module; 325 clk->bits = bits; 326 if (deactivate) { 327 /* 328 * Disable it during the initialization. Module should enable 329 * when used 330 */ 331 pmu_disable(clk); 332 } 333 clkdev_add(&clk->cl); 334 } 335 336 /* manage the clock generator */ 337 static void clkdev_add_cgu(const char *dev, const char *con, 338 unsigned int bits) 339 { 340 struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); 341 342 if (!clk) 343 return; 344 clk->cl.dev_id = dev; 345 clk->cl.con_id = con; 346 clk->cl.clk = clk; 347 clk->enable = cgu_enable; 348 clk->disable = cgu_disable; 349 clk->bits = bits; 350 clkdev_add(&clk->cl); 351 } 352 353 /* pci needs its own enable function as the setup is a bit more complex */ 354 static unsigned long valid_pci_rates[] = {CLOCK_33M, CLOCK_62_5M, 0}; 355 356 static void clkdev_add_pci(void) 357 { 358 struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL); 359 struct clk *clk_ext = kzalloc(sizeof(struct clk), GFP_KERNEL); 360 361 /* main pci clock */ 362 if (clk) { 363 clk->cl.dev_id = "17000000.pci"; 364 clk->cl.con_id = NULL; 365 clk->cl.clk = clk; 366 clk->rate = CLOCK_33M; 367 clk->rates = valid_pci_rates; 368 clk->enable = pci_enable; 369 clk->disable = pmu_disable; 370 clk->module = 0; 371 clk->bits = PMU_PCI; 372 clkdev_add(&clk->cl); 373 } 374 375 /* use internal/external bus clock */ 376 if (clk_ext) { 377 clk_ext->cl.dev_id = "17000000.pci"; 378 clk_ext->cl.con_id = "external"; 379 clk_ext->cl.clk = clk_ext; 380 clk_ext->enable = pci_ext_enable; 381 clk_ext->disable = pci_ext_disable; 382 clkdev_add(&clk_ext->cl); 383 } 384 } 385 386 /* xway socs can generate clocks on gpio pins */ 387 static unsigned long valid_clkout_rates[4][5] = { 388 {CLOCK_32_768K, CLOCK_1_536M, CLOCK_2_5M, CLOCK_12M, 0}, 389 {CLOCK_40M, CLOCK_12M, CLOCK_24M, CLOCK_48M, 0}, 390 {CLOCK_25M, CLOCK_40M, CLOCK_30M, CLOCK_60M, 0}, 391 {CLOCK_12M, CLOCK_50M, CLOCK_32_768K, CLOCK_25M, 0}, 392 }; 393 394 static void clkdev_add_clkout(void) 395 { 396 int i; 397 398 for (i = 0; i < 4; i++) { 399 struct clk *clk; 400 char *name; 401 402 name = kzalloc(sizeof("clkout0"), GFP_KERNEL); 403 if (!name) 404 continue; 405 sprintf(name, "clkout%d", i); 406 407 clk = kzalloc(sizeof(struct clk), GFP_KERNEL); 408 if (!clk) { 409 kfree(name); 410 continue; 411 } 412 clk->cl.dev_id = "1f103000.cgu"; 413 clk->cl.con_id = name; 414 clk->cl.clk = clk; 415 clk->rate = 0; 416 clk->rates = valid_clkout_rates[i]; 417 clk->enable = clkout_enable; 418 clk->module = i; 419 clkdev_add(&clk->cl); 420 } 421 } 422 423 /* bring up all register ranges that we need for basic system control */ 424 void __init ltq_soc_init(void) 425 { 426 struct resource res_pmu, res_cgu, res_ebu; 427 struct device_node *np_pmu = 428 of_find_compatible_node(NULL, NULL, "lantiq,pmu-xway"); 429 struct device_node *np_cgu = 430 of_find_compatible_node(NULL, NULL, "lantiq,cgu-xway"); 431 struct device_node *np_ebu = 432 of_find_compatible_node(NULL, NULL, "lantiq,ebu-xway"); 433 434 /* check if all the core register ranges are available */ 435 if (!np_pmu || !np_cgu || !np_ebu) 436 panic("Failed to load core nodes from devicetree"); 437 438 if (of_address_to_resource(np_pmu, 0, &res_pmu) || 439 of_address_to_resource(np_cgu, 0, &res_cgu) || 440 of_address_to_resource(np_ebu, 0, &res_ebu)) 441 panic("Failed to get core resources"); 442 443 of_node_put(np_pmu); 444 of_node_put(np_cgu); 445 of_node_put(np_ebu); 446 447 if (!request_mem_region(res_pmu.start, resource_size(&res_pmu), 448 res_pmu.name) || 449 !request_mem_region(res_cgu.start, resource_size(&res_cgu), 450 res_cgu.name) || 451 !request_mem_region(res_ebu.start, resource_size(&res_ebu), 452 res_ebu.name)) 453 pr_err("Failed to request core resources"); 454 455 pmu_membase = ioremap(res_pmu.start, resource_size(&res_pmu)); 456 ltq_cgu_membase = ioremap(res_cgu.start, 457 resource_size(&res_cgu)); 458 ltq_ebu_membase = ioremap(res_ebu.start, 459 resource_size(&res_ebu)); 460 if (!pmu_membase || !ltq_cgu_membase || !ltq_ebu_membase) 461 panic("Failed to remap core resources"); 462 463 /* make sure to unprotect the memory region where flash is located */ 464 ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0); 465 466 /* add our generic xway clocks */ 467 clkdev_add_pmu("10000000.fpi", NULL, 0, 0, PMU_FPI); 468 clkdev_add_pmu("1e100a00.gptu", NULL, 1, 0, PMU_GPT); 469 clkdev_add_pmu("1e100bb0.stp", NULL, 1, 0, PMU_STP); 470 clkdev_add_pmu("1e100c00.serial", NULL, 0, 0, PMU_ASC1); 471 clkdev_add_pmu("1e104100.dma", NULL, 1, 0, PMU_DMA); 472 clkdev_add_pmu("1e100800.spi", NULL, 1, 0, PMU_SPI); 473 clkdev_add_pmu("1e105300.ebu", NULL, 0, 0, PMU_EBU); 474 clkdev_add_clkout(); 475 476 /* add the soc dependent clocks */ 477 if (of_machine_is_compatible("lantiq,vr9")) { 478 ifccr = CGU_IFCCR_VR9; 479 pcicr = CGU_PCICR_VR9; 480 } else { 481 clkdev_add_pmu("1e180000.etop", NULL, 1, 0, PMU_PPE); 482 } 483 484 if (!of_machine_is_compatible("lantiq,ase")) 485 clkdev_add_pci(); 486 487 if (of_machine_is_compatible("lantiq,grx390") || 488 of_machine_is_compatible("lantiq,ar10")) { 489 clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY0); 490 clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY1); 491 clkdev_add_pmu("1e108000.switch", "gphy2", 0, 0, PMU_GPHY2); 492 clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB0_P); 493 clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB1_P); 494 /* rc 0 */ 495 clkdev_add_pmu("1f106800.phy", "phy", 1, 2, PMU_ANALOG_PCIE0_P); 496 clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI); 497 clkdev_add_pmu("1f106800.phy", "pdi", 1, 1, PMU1_PCIE_PDI); 498 clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL); 499 /* rc 1 */ 500 clkdev_add_pmu("1f700400.phy", "phy", 1, 2, PMU_ANALOG_PCIE1_P); 501 clkdev_add_pmu("19000000.pcie", "msi", 1, 1, PMU1_PCIE1_MSI); 502 clkdev_add_pmu("1f700400.phy", "pdi", 1, 1, PMU1_PCIE1_PDI); 503 clkdev_add_pmu("19000000.pcie", "ctl", 1, 1, PMU1_PCIE1_CTL); 504 } 505 506 if (of_machine_is_compatible("lantiq,ase")) { 507 if (ltq_cgu_r32(CGU_SYS) & (1 << 5)) 508 clkdev_add_static(CLOCK_266M, CLOCK_133M, 509 CLOCK_133M, CLOCK_266M); 510 else 511 clkdev_add_static(CLOCK_133M, CLOCK_133M, 512 CLOCK_133M, CLOCK_133M); 513 clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0); 514 clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P); 515 clkdev_add_pmu("1e180000.etop", "ppe", 1, 0, PMU_PPE); 516 clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY); 517 clkdev_add_pmu("1e180000.etop", "ephy", 1, 0, PMU_EPHY); 518 clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_ASE_SDIO); 519 clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); 520 } else if (of_machine_is_compatible("lantiq,grx390")) { 521 clkdev_add_static(ltq_grx390_cpu_hz(), ltq_grx390_fpi_hz(), 522 ltq_grx390_fpi_hz(), ltq_grx390_pp32_hz()); 523 clkdev_add_pmu("1e108000.switch", "gphy3", 0, 0, PMU_GPHY3); 524 clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0); 525 clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1); 526 /* rc 2 */ 527 clkdev_add_pmu("1f106a00.pcie", "phy", 1, 2, PMU_ANALOG_PCIE2_P); 528 clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI); 529 clkdev_add_pmu("1f106a00.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI); 530 clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL); 531 clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP); 532 clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); 533 clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); 534 } else if (of_machine_is_compatible("lantiq,ar10")) { 535 clkdev_add_static(ltq_ar10_cpu_hz(), ltq_ar10_fpi_hz(), 536 ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz()); 537 clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0); 538 clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1); 539 clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH | 540 PMU_PPE_DP | PMU_PPE_TC); 541 clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); 542 clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); 543 clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE); 544 clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); 545 } else if (of_machine_is_compatible("lantiq,vr9")) { 546 clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(), 547 ltq_vr9_fpi_hz(), ltq_vr9_pp32_hz()); 548 clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P); 549 clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM); 550 clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 0, PMU_USB1_P); 551 clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1 | PMU_AHBM); 552 clkdev_add_pmu("1f106800.phy", "phy", 1, 1, PMU1_PCIE_PHY); 553 clkdev_add_pmu("1d900000.pcie", "bus", 1, 0, PMU_PCIE_CLK); 554 clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI); 555 clkdev_add_pmu("1f106800.phy", "pdi", 1, 1, PMU1_PCIE_PDI); 556 clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL); 557 clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS); 558 559 clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF); 560 clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, 561 PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM | 562 PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 | 563 PMU_PPE_QSB | PMU_PPE_TOP); 564 clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY); 565 clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY); 566 clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); 567 clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); 568 clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); 569 } else if (of_machine_is_compatible("lantiq,ar9")) { 570 clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(), 571 ltq_ar9_fpi_hz(), CLOCK_250M); 572 clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P); 573 clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM); 574 clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 0, PMU_USB1_P); 575 clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1 | PMU_AHBM); 576 clkdev_add_pmu("1e180000.etop", "switch", 1, 0, PMU_SWITCH); 577 clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); 578 clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); 579 clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); 580 clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0); 581 } else { 582 clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(), 583 ltq_danube_fpi_hz(), ltq_danube_pp32_hz()); 584 clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM); 585 clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P); 586 clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO); 587 clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU); 588 clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE); 589 clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0); 590 } 591 } 592