xref: /openbmc/linux/arch/mips/kernel/vmlinux.lds.S (revision d3402925)
1/* SPDX-License-Identifier: GPL-2.0 */
2#include <asm/asm-offsets.h>
3#include <asm/thread_info.h>
4
5#define PAGE_SIZE _PAGE_SIZE
6
7/*
8 * Put .bss..swapper_pg_dir as the first thing in .bss. This will
9 * ensure that it has .bss alignment (64K).
10 */
11#define BSS_FIRST_SECTIONS *(.bss..swapper_pg_dir)
12
13/* Cavium Octeon should not have a separate PT_NOTE Program Header. */
14#ifndef CONFIG_CAVIUM_OCTEON_SOC
15#define EMITS_PT_NOTE
16#endif
17
18#include <asm-generic/vmlinux.lds.h>
19
20#undef mips
21#define mips mips
22OUTPUT_ARCH(mips)
23ENTRY(kernel_entry)
24PHDRS {
25	text PT_LOAD FLAGS(7);	/* RWX */
26#ifndef CONFIG_CAVIUM_OCTEON_SOC
27	note PT_NOTE FLAGS(4);	/* R__ */
28#endif /* CAVIUM_OCTEON_SOC */
29}
30
31#ifdef CONFIG_32BIT
32	#ifdef CONFIG_CPU_LITTLE_ENDIAN
33		jiffies	 = jiffies_64;
34	#else
35		jiffies	 = jiffies_64 + 4;
36	#endif
37#else
38	jiffies	 = jiffies_64;
39#endif
40
41SECTIONS
42{
43#ifdef CONFIG_BOOT_ELF64
44	/* Read-only sections, merged into text segment: */
45	/* . = 0xc000000000000000; */
46
47	/* This is the value for an Origin kernel, taken from an IRIX kernel.  */
48	/* . = 0xc00000000001c000; */
49
50	/* Set the vaddr for the text segment to a value
51	 *   >= 0xa800 0000 0001 9000 if no symmon is going to configured
52	 *   >= 0xa800 0000 0030 0000 otherwise
53	 */
54
55	/* . = 0xa800000000300000; */
56	. = 0xffffffff80300000;
57#endif
58	. = LINKER_LOAD_ADDRESS;
59	/* read-only */
60	_text = .;	/* Text and read-only data */
61	.text : {
62		TEXT_TEXT
63		SCHED_TEXT
64		LOCK_TEXT
65		KPROBES_TEXT
66		IRQENTRY_TEXT
67		SOFTIRQENTRY_TEXT
68		*(.fixup)
69		*(.gnu.warning)
70		. = ALIGN(16);
71		*(.got)	/* Global offset table */
72	} :text = 0
73	_etext = .;	/* End of text section */
74
75	EXCEPTION_TABLE(16)
76
77	/* Exception table for data bus errors */
78	__dbe_table : {
79		__start___dbe_table = .;
80		KEEP(*(__dbe_table))
81		__stop___dbe_table = .;
82	}
83
84	_sdata = .;			/* Start of data section */
85	RO_DATA(4096)
86
87	/* writeable */
88	.data : {	/* Data */
89		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
90
91		INIT_TASK_DATA(THREAD_SIZE)
92		NOSAVE_DATA
93		PAGE_ALIGNED_DATA(PAGE_SIZE)
94		CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
95		READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
96		DATA_DATA
97		CONSTRUCTORS
98	}
99	BUG_TABLE
100	_gp = . + 0x8000;
101	.lit8 : {
102		*(.lit8)
103	}
104	.lit4 : {
105		*(.lit4)
106	}
107	/* We want the small data sections together, so single-instruction offsets
108	   can access them all, and initialized data all before uninitialized, so
109	   we can shorten the on-disk segment size.  */
110	.sdata : {
111		*(.sdata)
112	}
113	_edata =  .;			/* End of data section */
114
115	/* will be freed after init */
116	. = ALIGN(PAGE_SIZE);		/* Init code and data */
117	__init_begin = .;
118	INIT_TEXT_SECTION(PAGE_SIZE)
119	INIT_DATA_SECTION(16)
120
121	. = ALIGN(4);
122	.mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) {
123		__mips_machines_start = .;
124		KEEP(*(.mips.machines.init))
125		__mips_machines_end = .;
126	}
127
128	/* .exit.text is discarded at runtime, not link time, to deal with
129	 * references from .rodata
130	 */
131	.exit.text : {
132		EXIT_TEXT
133	}
134	.exit.data : {
135		EXIT_DATA
136	}
137#ifdef CONFIG_SMP
138	PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
139#endif
140
141	.rel.dyn : ALIGN(8) {
142		*(.rel)
143		*(.rel*)
144	}
145
146#ifdef CONFIG_MIPS_ELF_APPENDED_DTB
147	STRUCT_ALIGN();
148	.appended_dtb : AT(ADDR(.appended_dtb) - LOAD_OFFSET) {
149		*(.appended_dtb)
150		KEEP(*(.appended_dtb))
151	}
152#endif
153
154#ifdef CONFIG_RELOCATABLE
155	. = ALIGN(4);
156
157	.data.reloc : {
158		_relocation_start = .;
159		/*
160		 * Space for relocation table
161		 * This needs to be filled so that the
162		 * relocs tool can overwrite the content.
163		 * An invalid value is left at the start of the
164		 * section to abort relocation if the table
165		 * has not been filled in.
166		 */
167		LONG(0xFFFFFFFF);
168		FILL(0);
169		. += CONFIG_RELOCATION_TABLE_SIZE - 4;
170		_relocation_end = .;
171	}
172#endif
173
174#ifdef CONFIG_MIPS_RAW_APPENDED_DTB
175	.fill : {
176		FILL(0);
177		BYTE(0);
178		STRUCT_ALIGN();
179	}
180	__appended_dtb = .;
181	/* leave space for appended DTB */
182	. += 0x100000;
183#endif
184	/*
185	 * Align to 64K in attempt to eliminate holes before the
186	 * .bss..swapper_pg_dir section at the start of .bss.  This
187	 * also satisfies PAGE_SIZE alignment as the largest page size
188	 * allowed is 64K.
189	 */
190	. = ALIGN(0x10000);
191	__init_end = .;
192	/* freed after init ends here */
193
194	/*
195	 * Force .bss to 64K alignment so that .bss..swapper_pg_dir
196	 * gets that alignment.	 .sbss should be empty, so there will be
197	 * no holes after __init_end. */
198	BSS_SECTION(0, 0x10000, 8)
199
200	_end = . ;
201
202	/* These mark the ABI of the kernel for debuggers.  */
203	.mdebug.abi32 : {
204		KEEP(*(.mdebug.abi32))
205	}
206	.mdebug.abi64 : {
207		KEEP(*(.mdebug.abi64))
208	}
209
210	/* This is the MIPS specific mdebug section.  */
211	.mdebug : {
212		*(.mdebug)
213	}
214
215	STABS_DEBUG
216	DWARF_DEBUG
217	ELF_DETAILS
218
219	/* These must appear regardless of  .  */
220	.gptab.sdata : {
221		*(.gptab.data)
222		*(.gptab.sdata)
223	}
224	.gptab.sbss : {
225		*(.gptab.bss)
226		*(.gptab.sbss)
227	}
228
229	/* Sections to be discarded */
230	DISCARDS
231	/DISCARD/ : {
232		/* ABI crap starts here */
233		*(.MIPS.abiflags)
234		*(.MIPS.options)
235		*(.gnu.attributes)
236		*(.options)
237		*(.pdr)
238		*(.reginfo)
239	}
240}
241