xref: /openbmc/linux/arch/mips/kernel/unaligned.c (revision e00a844a)
1 /*
2  * Handle unaligned accesses by emulation.
3  *
4  * This file is subject to the terms and conditions of the GNU General Public
5  * License.  See the file "COPYING" in the main directory of this archive
6  * for more details.
7  *
8  * Copyright (C) 1996, 1998, 1999, 2002 by Ralf Baechle
9  * Copyright (C) 1999 Silicon Graphics, Inc.
10  * Copyright (C) 2014 Imagination Technologies Ltd.
11  *
12  * This file contains exception handler for address error exception with the
13  * special capability to execute faulting instructions in software.  The
14  * handler does not try to handle the case when the program counter points
15  * to an address not aligned to a word boundary.
16  *
17  * Putting data to unaligned addresses is a bad practice even on Intel where
18  * only the performance is affected.  Much worse is that such code is non-
19  * portable.  Due to several programs that die on MIPS due to alignment
20  * problems I decided to implement this handler anyway though I originally
21  * didn't intend to do this at all for user code.
22  *
23  * For now I enable fixing of address errors by default to make life easier.
24  * I however intend to disable this somewhen in the future when the alignment
25  * problems with user programs have been fixed.	 For programmers this is the
26  * right way to go.
27  *
28  * Fixing address errors is a per process option.  The option is inherited
29  * across fork(2) and execve(2) calls.	If you really want to use the
30  * option in your user programs - I discourage the use of the software
31  * emulation strongly - use the following code in your userland stuff:
32  *
33  * #include <sys/sysmips.h>
34  *
35  * ...
36  * sysmips(MIPS_FIXADE, x);
37  * ...
38  *
39  * The argument x is 0 for disabling software emulation, enabled otherwise.
40  *
41  * Below a little program to play around with this feature.
42  *
43  * #include <stdio.h>
44  * #include <sys/sysmips.h>
45  *
46  * struct foo {
47  *	   unsigned char bar[8];
48  * };
49  *
50  * main(int argc, char *argv[])
51  * {
52  *	   struct foo x = {0, 1, 2, 3, 4, 5, 6, 7};
53  *	   unsigned int *p = (unsigned int *) (x.bar + 3);
54  *	   int i;
55  *
56  *	   if (argc > 1)
57  *		   sysmips(MIPS_FIXADE, atoi(argv[1]));
58  *
59  *	   printf("*p = %08lx\n", *p);
60  *
61  *	   *p = 0xdeadface;
62  *
63  *	   for(i = 0; i <= 7; i++)
64  *	   printf("%02x ", x.bar[i]);
65  *	   printf("\n");
66  * }
67  *
68  * Coprocessor loads are not supported; I think this case is unimportant
69  * in the practice.
70  *
71  * TODO: Handle ndc (attempted store to doubleword in uncached memory)
72  *	 exception for the R6000.
73  *	 A store crossing a page boundary might be executed only partially.
74  *	 Undo the partial store in this case.
75  */
76 #include <linux/context_tracking.h>
77 #include <linux/mm.h>
78 #include <linux/signal.h>
79 #include <linux/smp.h>
80 #include <linux/sched.h>
81 #include <linux/debugfs.h>
82 #include <linux/perf_event.h>
83 
84 #include <asm/asm.h>
85 #include <asm/branch.h>
86 #include <asm/byteorder.h>
87 #include <asm/cop2.h>
88 #include <asm/debug.h>
89 #include <asm/fpu.h>
90 #include <asm/fpu_emulator.h>
91 #include <asm/inst.h>
92 #include <linux/uaccess.h>
93 
94 #define STR(x)	__STR(x)
95 #define __STR(x)  #x
96 
97 enum {
98 	UNALIGNED_ACTION_QUIET,
99 	UNALIGNED_ACTION_SIGNAL,
100 	UNALIGNED_ACTION_SHOW,
101 };
102 #ifdef CONFIG_DEBUG_FS
103 static u32 unaligned_instructions;
104 static u32 unaligned_action;
105 #else
106 #define unaligned_action UNALIGNED_ACTION_QUIET
107 #endif
108 extern void show_registers(struct pt_regs *regs);
109 
110 #ifdef __BIG_ENDIAN
111 #define     _LoadHW(addr, value, res, type)  \
112 do {                                                        \
113 		__asm__ __volatile__ (".set\tnoat\n"        \
114 			"1:\t"type##_lb("%0", "0(%2)")"\n"  \
115 			"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
116 			"sll\t%0, 0x8\n\t"                  \
117 			"or\t%0, $1\n\t"                    \
118 			"li\t%1, 0\n"                       \
119 			"3:\t.set\tat\n\t"                  \
120 			".insn\n\t"                         \
121 			".section\t.fixup,\"ax\"\n\t"       \
122 			"4:\tli\t%1, %3\n\t"                \
123 			"j\t3b\n\t"                         \
124 			".previous\n\t"                     \
125 			".section\t__ex_table,\"a\"\n\t"    \
126 			STR(PTR)"\t1b, 4b\n\t"              \
127 			STR(PTR)"\t2b, 4b\n\t"              \
128 			".previous"                         \
129 			: "=&r" (value), "=r" (res)         \
130 			: "r" (addr), "i" (-EFAULT));       \
131 } while(0)
132 
133 #ifndef CONFIG_CPU_MIPSR6
134 #define     _LoadW(addr, value, res, type)   \
135 do {                                                        \
136 		__asm__ __volatile__ (                      \
137 			"1:\t"type##_lwl("%0", "(%2)")"\n"   \
138 			"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
139 			"li\t%1, 0\n"                       \
140 			"3:\n\t"                            \
141 			".insn\n\t"                         \
142 			".section\t.fixup,\"ax\"\n\t"       \
143 			"4:\tli\t%1, %3\n\t"                \
144 			"j\t3b\n\t"                         \
145 			".previous\n\t"                     \
146 			".section\t__ex_table,\"a\"\n\t"    \
147 			STR(PTR)"\t1b, 4b\n\t"              \
148 			STR(PTR)"\t2b, 4b\n\t"              \
149 			".previous"                         \
150 			: "=&r" (value), "=r" (res)         \
151 			: "r" (addr), "i" (-EFAULT));       \
152 } while(0)
153 
154 #else
155 /* MIPSR6 has no lwl instruction */
156 #define     _LoadW(addr, value, res, type) \
157 do {                                                        \
158 		__asm__ __volatile__ (			    \
159 			".set\tpush\n"			    \
160 			".set\tnoat\n\t"		    \
161 			"1:"type##_lb("%0", "0(%2)")"\n\t"  \
162 			"2:"type##_lbu("$1", "1(%2)")"\n\t" \
163 			"sll\t%0, 0x8\n\t"		    \
164 			"or\t%0, $1\n\t"		    \
165 			"3:"type##_lbu("$1", "2(%2)")"\n\t" \
166 			"sll\t%0, 0x8\n\t"		    \
167 			"or\t%0, $1\n\t"		    \
168 			"4:"type##_lbu("$1", "3(%2)")"\n\t" \
169 			"sll\t%0, 0x8\n\t"		    \
170 			"or\t%0, $1\n\t"		    \
171 			"li\t%1, 0\n"			    \
172 			".set\tpop\n"			    \
173 			"10:\n\t"			    \
174 			".insn\n\t"			    \
175 			".section\t.fixup,\"ax\"\n\t"	    \
176 			"11:\tli\t%1, %3\n\t"		    \
177 			"j\t10b\n\t"			    \
178 			".previous\n\t"			    \
179 			".section\t__ex_table,\"a\"\n\t"    \
180 			STR(PTR)"\t1b, 11b\n\t"		    \
181 			STR(PTR)"\t2b, 11b\n\t"		    \
182 			STR(PTR)"\t3b, 11b\n\t"		    \
183 			STR(PTR)"\t4b, 11b\n\t"		    \
184 			".previous"			    \
185 			: "=&r" (value), "=r" (res)	    \
186 			: "r" (addr), "i" (-EFAULT));       \
187 } while(0)
188 
189 #endif /* CONFIG_CPU_MIPSR6 */
190 
191 #define     _LoadHWU(addr, value, res, type) \
192 do {                                                        \
193 		__asm__ __volatile__ (                      \
194 			".set\tnoat\n"                      \
195 			"1:\t"type##_lbu("%0", "0(%2)")"\n" \
196 			"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
197 			"sll\t%0, 0x8\n\t"                  \
198 			"or\t%0, $1\n\t"                    \
199 			"li\t%1, 0\n"                       \
200 			"3:\n\t"                            \
201 			".insn\n\t"                         \
202 			".set\tat\n\t"                      \
203 			".section\t.fixup,\"ax\"\n\t"       \
204 			"4:\tli\t%1, %3\n\t"                \
205 			"j\t3b\n\t"                         \
206 			".previous\n\t"                     \
207 			".section\t__ex_table,\"a\"\n\t"    \
208 			STR(PTR)"\t1b, 4b\n\t"              \
209 			STR(PTR)"\t2b, 4b\n\t"              \
210 			".previous"                         \
211 			: "=&r" (value), "=r" (res)         \
212 			: "r" (addr), "i" (-EFAULT));       \
213 } while(0)
214 
215 #ifndef CONFIG_CPU_MIPSR6
216 #define     _LoadWU(addr, value, res, type)  \
217 do {                                                        \
218 		__asm__ __volatile__ (                      \
219 			"1:\t"type##_lwl("%0", "(%2)")"\n"  \
220 			"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
221 			"dsll\t%0, %0, 32\n\t"              \
222 			"dsrl\t%0, %0, 32\n\t"              \
223 			"li\t%1, 0\n"                       \
224 			"3:\n\t"                            \
225 			".insn\n\t"                         \
226 			"\t.section\t.fixup,\"ax\"\n\t"     \
227 			"4:\tli\t%1, %3\n\t"                \
228 			"j\t3b\n\t"                         \
229 			".previous\n\t"                     \
230 			".section\t__ex_table,\"a\"\n\t"    \
231 			STR(PTR)"\t1b, 4b\n\t"              \
232 			STR(PTR)"\t2b, 4b\n\t"              \
233 			".previous"                         \
234 			: "=&r" (value), "=r" (res)         \
235 			: "r" (addr), "i" (-EFAULT));       \
236 } while(0)
237 
238 #define     _LoadDW(addr, value, res)  \
239 do {                                                        \
240 		__asm__ __volatile__ (                      \
241 			"1:\tldl\t%0, (%2)\n"               \
242 			"2:\tldr\t%0, 7(%2)\n\t"            \
243 			"li\t%1, 0\n"                       \
244 			"3:\n\t"                            \
245 			".insn\n\t"                         \
246 			"\t.section\t.fixup,\"ax\"\n\t"     \
247 			"4:\tli\t%1, %3\n\t"                \
248 			"j\t3b\n\t"                         \
249 			".previous\n\t"                     \
250 			".section\t__ex_table,\"a\"\n\t"    \
251 			STR(PTR)"\t1b, 4b\n\t"              \
252 			STR(PTR)"\t2b, 4b\n\t"              \
253 			".previous"                         \
254 			: "=&r" (value), "=r" (res)         \
255 			: "r" (addr), "i" (-EFAULT));       \
256 } while(0)
257 
258 #else
259 /* MIPSR6 has not lwl and ldl instructions */
260 #define	    _LoadWU(addr, value, res, type) \
261 do {                                                        \
262 		__asm__ __volatile__ (			    \
263 			".set\tpush\n\t"		    \
264 			".set\tnoat\n\t"		    \
265 			"1:"type##_lbu("%0", "0(%2)")"\n\t" \
266 			"2:"type##_lbu("$1", "1(%2)")"\n\t" \
267 			"sll\t%0, 0x8\n\t"		    \
268 			"or\t%0, $1\n\t"		    \
269 			"3:"type##_lbu("$1", "2(%2)")"\n\t" \
270 			"sll\t%0, 0x8\n\t"		    \
271 			"or\t%0, $1\n\t"		    \
272 			"4:"type##_lbu("$1", "3(%2)")"\n\t" \
273 			"sll\t%0, 0x8\n\t"		    \
274 			"or\t%0, $1\n\t"		    \
275 			"li\t%1, 0\n"			    \
276 			".set\tpop\n"			    \
277 			"10:\n\t"			    \
278 			".insn\n\t"			    \
279 			".section\t.fixup,\"ax\"\n\t"	    \
280 			"11:\tli\t%1, %3\n\t"		    \
281 			"j\t10b\n\t"			    \
282 			".previous\n\t"			    \
283 			".section\t__ex_table,\"a\"\n\t"    \
284 			STR(PTR)"\t1b, 11b\n\t"		    \
285 			STR(PTR)"\t2b, 11b\n\t"		    \
286 			STR(PTR)"\t3b, 11b\n\t"		    \
287 			STR(PTR)"\t4b, 11b\n\t"		    \
288 			".previous"			    \
289 			: "=&r" (value), "=r" (res)	    \
290 			: "r" (addr), "i" (-EFAULT));       \
291 } while(0)
292 
293 #define     _LoadDW(addr, value, res)  \
294 do {                                                        \
295 		__asm__ __volatile__ (			    \
296 			".set\tpush\n\t"		    \
297 			".set\tnoat\n\t"		    \
298 			"1:lb\t%0, 0(%2)\n\t"    	    \
299 			"2:lbu\t $1, 1(%2)\n\t"   	    \
300 			"dsll\t%0, 0x8\n\t"		    \
301 			"or\t%0, $1\n\t"		    \
302 			"3:lbu\t$1, 2(%2)\n\t"   	    \
303 			"dsll\t%0, 0x8\n\t"		    \
304 			"or\t%0, $1\n\t"		    \
305 			"4:lbu\t$1, 3(%2)\n\t"   	    \
306 			"dsll\t%0, 0x8\n\t"		    \
307 			"or\t%0, $1\n\t"		    \
308 			"5:lbu\t$1, 4(%2)\n\t"   	    \
309 			"dsll\t%0, 0x8\n\t"		    \
310 			"or\t%0, $1\n\t"		    \
311 			"6:lbu\t$1, 5(%2)\n\t"   	    \
312 			"dsll\t%0, 0x8\n\t"		    \
313 			"or\t%0, $1\n\t"		    \
314 			"7:lbu\t$1, 6(%2)\n\t"   	    \
315 			"dsll\t%0, 0x8\n\t"		    \
316 			"or\t%0, $1\n\t"		    \
317 			"8:lbu\t$1, 7(%2)\n\t"   	    \
318 			"dsll\t%0, 0x8\n\t"		    \
319 			"or\t%0, $1\n\t"		    \
320 			"li\t%1, 0\n"			    \
321 			".set\tpop\n\t"			    \
322 			"10:\n\t"			    \
323 			".insn\n\t"			    \
324 			".section\t.fixup,\"ax\"\n\t"	    \
325 			"11:\tli\t%1, %3\n\t"		    \
326 			"j\t10b\n\t"			    \
327 			".previous\n\t"			    \
328 			".section\t__ex_table,\"a\"\n\t"    \
329 			STR(PTR)"\t1b, 11b\n\t"		    \
330 			STR(PTR)"\t2b, 11b\n\t"		    \
331 			STR(PTR)"\t3b, 11b\n\t"		    \
332 			STR(PTR)"\t4b, 11b\n\t"		    \
333 			STR(PTR)"\t5b, 11b\n\t"		    \
334 			STR(PTR)"\t6b, 11b\n\t"		    \
335 			STR(PTR)"\t7b, 11b\n\t"		    \
336 			STR(PTR)"\t8b, 11b\n\t"		    \
337 			".previous"			    \
338 			: "=&r" (value), "=r" (res)	    \
339 			: "r" (addr), "i" (-EFAULT));       \
340 } while(0)
341 
342 #endif /* CONFIG_CPU_MIPSR6 */
343 
344 
345 #define     _StoreHW(addr, value, res, type) \
346 do {                                                        \
347 		__asm__ __volatile__ (                      \
348 			".set\tnoat\n"                      \
349 			"1:\t"type##_sb("%1", "1(%2)")"\n"  \
350 			"srl\t$1, %1, 0x8\n"                \
351 			"2:\t"type##_sb("$1", "0(%2)")"\n"  \
352 			".set\tat\n\t"                      \
353 			"li\t%0, 0\n"                       \
354 			"3:\n\t"                            \
355 			".insn\n\t"                         \
356 			".section\t.fixup,\"ax\"\n\t"       \
357 			"4:\tli\t%0, %3\n\t"                \
358 			"j\t3b\n\t"                         \
359 			".previous\n\t"                     \
360 			".section\t__ex_table,\"a\"\n\t"    \
361 			STR(PTR)"\t1b, 4b\n\t"              \
362 			STR(PTR)"\t2b, 4b\n\t"              \
363 			".previous"                         \
364 			: "=r" (res)                        \
365 			: "r" (value), "r" (addr), "i" (-EFAULT));\
366 } while(0)
367 
368 #ifndef CONFIG_CPU_MIPSR6
369 #define     _StoreW(addr, value, res, type)  \
370 do {                                                        \
371 		__asm__ __volatile__ (                      \
372 			"1:\t"type##_swl("%1", "(%2)")"\n"  \
373 			"2:\t"type##_swr("%1", "3(%2)")"\n\t"\
374 			"li\t%0, 0\n"                       \
375 			"3:\n\t"                            \
376 			".insn\n\t"                         \
377 			".section\t.fixup,\"ax\"\n\t"       \
378 			"4:\tli\t%0, %3\n\t"                \
379 			"j\t3b\n\t"                         \
380 			".previous\n\t"                     \
381 			".section\t__ex_table,\"a\"\n\t"    \
382 			STR(PTR)"\t1b, 4b\n\t"              \
383 			STR(PTR)"\t2b, 4b\n\t"              \
384 			".previous"                         \
385 		: "=r" (res)                                \
386 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
387 } while(0)
388 
389 #define     _StoreDW(addr, value, res) \
390 do {                                                        \
391 		__asm__ __volatile__ (                      \
392 			"1:\tsdl\t%1,(%2)\n"                \
393 			"2:\tsdr\t%1, 7(%2)\n\t"            \
394 			"li\t%0, 0\n"                       \
395 			"3:\n\t"                            \
396 			".insn\n\t"                         \
397 			".section\t.fixup,\"ax\"\n\t"       \
398 			"4:\tli\t%0, %3\n\t"                \
399 			"j\t3b\n\t"                         \
400 			".previous\n\t"                     \
401 			".section\t__ex_table,\"a\"\n\t"    \
402 			STR(PTR)"\t1b, 4b\n\t"              \
403 			STR(PTR)"\t2b, 4b\n\t"              \
404 			".previous"                         \
405 		: "=r" (res)                                \
406 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
407 } while(0)
408 
409 #else
410 /* MIPSR6 has no swl and sdl instructions */
411 #define     _StoreW(addr, value, res, type)  \
412 do {                                                        \
413 		__asm__ __volatile__ (                      \
414 			".set\tpush\n\t"		    \
415 			".set\tnoat\n\t"		    \
416 			"1:"type##_sb("%1", "3(%2)")"\n\t"  \
417 			"srl\t$1, %1, 0x8\n\t"		    \
418 			"2:"type##_sb("$1", "2(%2)")"\n\t"  \
419 			"srl\t$1, $1,  0x8\n\t"		    \
420 			"3:"type##_sb("$1", "1(%2)")"\n\t"  \
421 			"srl\t$1, $1, 0x8\n\t"		    \
422 			"4:"type##_sb("$1", "0(%2)")"\n\t"  \
423 			".set\tpop\n\t"			    \
424 			"li\t%0, 0\n"			    \
425 			"10:\n\t"			    \
426 			".insn\n\t"			    \
427 			".section\t.fixup,\"ax\"\n\t"	    \
428 			"11:\tli\t%0, %3\n\t"		    \
429 			"j\t10b\n\t"			    \
430 			".previous\n\t"			    \
431 			".section\t__ex_table,\"a\"\n\t"    \
432 			STR(PTR)"\t1b, 11b\n\t"		    \
433 			STR(PTR)"\t2b, 11b\n\t"		    \
434 			STR(PTR)"\t3b, 11b\n\t"		    \
435 			STR(PTR)"\t4b, 11b\n\t"		    \
436 			".previous"			    \
437 		: "=&r" (res)			    	    \
438 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
439 		: "memory");                                \
440 } while(0)
441 
442 #define     _StoreDW(addr, value, res) \
443 do {                                                        \
444 		__asm__ __volatile__ (                      \
445 			".set\tpush\n\t"		    \
446 			".set\tnoat\n\t"		    \
447 			"1:sb\t%1, 7(%2)\n\t"    	    \
448 			"dsrl\t$1, %1, 0x8\n\t"		    \
449 			"2:sb\t$1, 6(%2)\n\t"    	    \
450 			"dsrl\t$1, $1, 0x8\n\t"		    \
451 			"3:sb\t$1, 5(%2)\n\t"    	    \
452 			"dsrl\t$1, $1, 0x8\n\t"		    \
453 			"4:sb\t$1, 4(%2)\n\t"    	    \
454 			"dsrl\t$1, $1, 0x8\n\t"		    \
455 			"5:sb\t$1, 3(%2)\n\t"    	    \
456 			"dsrl\t$1, $1, 0x8\n\t"		    \
457 			"6:sb\t$1, 2(%2)\n\t"    	    \
458 			"dsrl\t$1, $1, 0x8\n\t"		    \
459 			"7:sb\t$1, 1(%2)\n\t"    	    \
460 			"dsrl\t$1, $1, 0x8\n\t"		    \
461 			"8:sb\t$1, 0(%2)\n\t"    	    \
462 			"dsrl\t$1, $1, 0x8\n\t"		    \
463 			".set\tpop\n\t"			    \
464 			"li\t%0, 0\n"			    \
465 			"10:\n\t"			    \
466 			".insn\n\t"			    \
467 			".section\t.fixup,\"ax\"\n\t"	    \
468 			"11:\tli\t%0, %3\n\t"		    \
469 			"j\t10b\n\t"			    \
470 			".previous\n\t"			    \
471 			".section\t__ex_table,\"a\"\n\t"    \
472 			STR(PTR)"\t1b, 11b\n\t"		    \
473 			STR(PTR)"\t2b, 11b\n\t"		    \
474 			STR(PTR)"\t3b, 11b\n\t"		    \
475 			STR(PTR)"\t4b, 11b\n\t"		    \
476 			STR(PTR)"\t5b, 11b\n\t"		    \
477 			STR(PTR)"\t6b, 11b\n\t"		    \
478 			STR(PTR)"\t7b, 11b\n\t"		    \
479 			STR(PTR)"\t8b, 11b\n\t"		    \
480 			".previous"			    \
481 		: "=&r" (res)			    	    \
482 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
483 		: "memory");                                \
484 } while(0)
485 
486 #endif /* CONFIG_CPU_MIPSR6 */
487 
488 #else /* __BIG_ENDIAN */
489 
490 #define     _LoadHW(addr, value, res, type)  \
491 do {                                                        \
492 		__asm__ __volatile__ (".set\tnoat\n"        \
493 			"1:\t"type##_lb("%0", "1(%2)")"\n"  \
494 			"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
495 			"sll\t%0, 0x8\n\t"                  \
496 			"or\t%0, $1\n\t"                    \
497 			"li\t%1, 0\n"                       \
498 			"3:\t.set\tat\n\t"                  \
499 			".insn\n\t"                         \
500 			".section\t.fixup,\"ax\"\n\t"       \
501 			"4:\tli\t%1, %3\n\t"                \
502 			"j\t3b\n\t"                         \
503 			".previous\n\t"                     \
504 			".section\t__ex_table,\"a\"\n\t"    \
505 			STR(PTR)"\t1b, 4b\n\t"              \
506 			STR(PTR)"\t2b, 4b\n\t"              \
507 			".previous"                         \
508 			: "=&r" (value), "=r" (res)         \
509 			: "r" (addr), "i" (-EFAULT));       \
510 } while(0)
511 
512 #ifndef CONFIG_CPU_MIPSR6
513 #define     _LoadW(addr, value, res, type)   \
514 do {                                                        \
515 		__asm__ __volatile__ (                      \
516 			"1:\t"type##_lwl("%0", "3(%2)")"\n" \
517 			"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
518 			"li\t%1, 0\n"                       \
519 			"3:\n\t"                            \
520 			".insn\n\t"                         \
521 			".section\t.fixup,\"ax\"\n\t"       \
522 			"4:\tli\t%1, %3\n\t"                \
523 			"j\t3b\n\t"                         \
524 			".previous\n\t"                     \
525 			".section\t__ex_table,\"a\"\n\t"    \
526 			STR(PTR)"\t1b, 4b\n\t"              \
527 			STR(PTR)"\t2b, 4b\n\t"              \
528 			".previous"                         \
529 			: "=&r" (value), "=r" (res)         \
530 			: "r" (addr), "i" (-EFAULT));       \
531 } while(0)
532 
533 #else
534 /* MIPSR6 has no lwl instruction */
535 #define     _LoadW(addr, value, res, type) \
536 do {                                                        \
537 		__asm__ __volatile__ (			    \
538 			".set\tpush\n"			    \
539 			".set\tnoat\n\t"		    \
540 			"1:"type##_lb("%0", "3(%2)")"\n\t"  \
541 			"2:"type##_lbu("$1", "2(%2)")"\n\t" \
542 			"sll\t%0, 0x8\n\t"		    \
543 			"or\t%0, $1\n\t"		    \
544 			"3:"type##_lbu("$1", "1(%2)")"\n\t" \
545 			"sll\t%0, 0x8\n\t"		    \
546 			"or\t%0, $1\n\t"		    \
547 			"4:"type##_lbu("$1", "0(%2)")"\n\t" \
548 			"sll\t%0, 0x8\n\t"		    \
549 			"or\t%0, $1\n\t"		    \
550 			"li\t%1, 0\n"			    \
551 			".set\tpop\n"			    \
552 			"10:\n\t"			    \
553 			".insn\n\t"			    \
554 			".section\t.fixup,\"ax\"\n\t"	    \
555 			"11:\tli\t%1, %3\n\t"		    \
556 			"j\t10b\n\t"			    \
557 			".previous\n\t"			    \
558 			".section\t__ex_table,\"a\"\n\t"    \
559 			STR(PTR)"\t1b, 11b\n\t"		    \
560 			STR(PTR)"\t2b, 11b\n\t"		    \
561 			STR(PTR)"\t3b, 11b\n\t"		    \
562 			STR(PTR)"\t4b, 11b\n\t"		    \
563 			".previous"			    \
564 			: "=&r" (value), "=r" (res)	    \
565 			: "r" (addr), "i" (-EFAULT));       \
566 } while(0)
567 
568 #endif /* CONFIG_CPU_MIPSR6 */
569 
570 
571 #define     _LoadHWU(addr, value, res, type) \
572 do {                                                        \
573 		__asm__ __volatile__ (                      \
574 			".set\tnoat\n"                      \
575 			"1:\t"type##_lbu("%0", "1(%2)")"\n" \
576 			"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
577 			"sll\t%0, 0x8\n\t"                  \
578 			"or\t%0, $1\n\t"                    \
579 			"li\t%1, 0\n"                       \
580 			"3:\n\t"                            \
581 			".insn\n\t"                         \
582 			".set\tat\n\t"                      \
583 			".section\t.fixup,\"ax\"\n\t"       \
584 			"4:\tli\t%1, %3\n\t"                \
585 			"j\t3b\n\t"                         \
586 			".previous\n\t"                     \
587 			".section\t__ex_table,\"a\"\n\t"    \
588 			STR(PTR)"\t1b, 4b\n\t"              \
589 			STR(PTR)"\t2b, 4b\n\t"              \
590 			".previous"                         \
591 			: "=&r" (value), "=r" (res)         \
592 			: "r" (addr), "i" (-EFAULT));       \
593 } while(0)
594 
595 #ifndef CONFIG_CPU_MIPSR6
596 #define     _LoadWU(addr, value, res, type)  \
597 do {                                                        \
598 		__asm__ __volatile__ (                      \
599 			"1:\t"type##_lwl("%0", "3(%2)")"\n" \
600 			"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
601 			"dsll\t%0, %0, 32\n\t"              \
602 			"dsrl\t%0, %0, 32\n\t"              \
603 			"li\t%1, 0\n"                       \
604 			"3:\n\t"                            \
605 			".insn\n\t"                         \
606 			"\t.section\t.fixup,\"ax\"\n\t"     \
607 			"4:\tli\t%1, %3\n\t"                \
608 			"j\t3b\n\t"                         \
609 			".previous\n\t"                     \
610 			".section\t__ex_table,\"a\"\n\t"    \
611 			STR(PTR)"\t1b, 4b\n\t"              \
612 			STR(PTR)"\t2b, 4b\n\t"              \
613 			".previous"                         \
614 			: "=&r" (value), "=r" (res)         \
615 			: "r" (addr), "i" (-EFAULT));       \
616 } while(0)
617 
618 #define     _LoadDW(addr, value, res)  \
619 do {                                                        \
620 		__asm__ __volatile__ (                      \
621 			"1:\tldl\t%0, 7(%2)\n"              \
622 			"2:\tldr\t%0, (%2)\n\t"             \
623 			"li\t%1, 0\n"                       \
624 			"3:\n\t"                            \
625 			".insn\n\t"                         \
626 			"\t.section\t.fixup,\"ax\"\n\t"     \
627 			"4:\tli\t%1, %3\n\t"                \
628 			"j\t3b\n\t"                         \
629 			".previous\n\t"                     \
630 			".section\t__ex_table,\"a\"\n\t"    \
631 			STR(PTR)"\t1b, 4b\n\t"              \
632 			STR(PTR)"\t2b, 4b\n\t"              \
633 			".previous"                         \
634 			: "=&r" (value), "=r" (res)         \
635 			: "r" (addr), "i" (-EFAULT));       \
636 } while(0)
637 
638 #else
639 /* MIPSR6 has not lwl and ldl instructions */
640 #define	    _LoadWU(addr, value, res, type) \
641 do {                                                        \
642 		__asm__ __volatile__ (			    \
643 			".set\tpush\n\t"		    \
644 			".set\tnoat\n\t"		    \
645 			"1:"type##_lbu("%0", "3(%2)")"\n\t" \
646 			"2:"type##_lbu("$1", "2(%2)")"\n\t" \
647 			"sll\t%0, 0x8\n\t"		    \
648 			"or\t%0, $1\n\t"		    \
649 			"3:"type##_lbu("$1", "1(%2)")"\n\t" \
650 			"sll\t%0, 0x8\n\t"		    \
651 			"or\t%0, $1\n\t"		    \
652 			"4:"type##_lbu("$1", "0(%2)")"\n\t" \
653 			"sll\t%0, 0x8\n\t"		    \
654 			"or\t%0, $1\n\t"		    \
655 			"li\t%1, 0\n"			    \
656 			".set\tpop\n"			    \
657 			"10:\n\t"			    \
658 			".insn\n\t"			    \
659 			".section\t.fixup,\"ax\"\n\t"	    \
660 			"11:\tli\t%1, %3\n\t"		    \
661 			"j\t10b\n\t"			    \
662 			".previous\n\t"			    \
663 			".section\t__ex_table,\"a\"\n\t"    \
664 			STR(PTR)"\t1b, 11b\n\t"		    \
665 			STR(PTR)"\t2b, 11b\n\t"		    \
666 			STR(PTR)"\t3b, 11b\n\t"		    \
667 			STR(PTR)"\t4b, 11b\n\t"		    \
668 			".previous"			    \
669 			: "=&r" (value), "=r" (res)	    \
670 			: "r" (addr), "i" (-EFAULT));       \
671 } while(0)
672 
673 #define     _LoadDW(addr, value, res)  \
674 do {                                                        \
675 		__asm__ __volatile__ (			    \
676 			".set\tpush\n\t"		    \
677 			".set\tnoat\n\t"		    \
678 			"1:lb\t%0, 7(%2)\n\t"    	    \
679 			"2:lbu\t$1, 6(%2)\n\t"   	    \
680 			"dsll\t%0, 0x8\n\t"		    \
681 			"or\t%0, $1\n\t"		    \
682 			"3:lbu\t$1, 5(%2)\n\t"   	    \
683 			"dsll\t%0, 0x8\n\t"		    \
684 			"or\t%0, $1\n\t"		    \
685 			"4:lbu\t$1, 4(%2)\n\t"   	    \
686 			"dsll\t%0, 0x8\n\t"		    \
687 			"or\t%0, $1\n\t"		    \
688 			"5:lbu\t$1, 3(%2)\n\t"   	    \
689 			"dsll\t%0, 0x8\n\t"		    \
690 			"or\t%0, $1\n\t"		    \
691 			"6:lbu\t$1, 2(%2)\n\t"   	    \
692 			"dsll\t%0, 0x8\n\t"		    \
693 			"or\t%0, $1\n\t"		    \
694 			"7:lbu\t$1, 1(%2)\n\t"   	    \
695 			"dsll\t%0, 0x8\n\t"		    \
696 			"or\t%0, $1\n\t"		    \
697 			"8:lbu\t$1, 0(%2)\n\t"   	    \
698 			"dsll\t%0, 0x8\n\t"		    \
699 			"or\t%0, $1\n\t"		    \
700 			"li\t%1, 0\n"			    \
701 			".set\tpop\n\t"			    \
702 			"10:\n\t"			    \
703 			".insn\n\t"			    \
704 			".section\t.fixup,\"ax\"\n\t"	    \
705 			"11:\tli\t%1, %3\n\t"		    \
706 			"j\t10b\n\t"			    \
707 			".previous\n\t"			    \
708 			".section\t__ex_table,\"a\"\n\t"    \
709 			STR(PTR)"\t1b, 11b\n\t"		    \
710 			STR(PTR)"\t2b, 11b\n\t"		    \
711 			STR(PTR)"\t3b, 11b\n\t"		    \
712 			STR(PTR)"\t4b, 11b\n\t"		    \
713 			STR(PTR)"\t5b, 11b\n\t"		    \
714 			STR(PTR)"\t6b, 11b\n\t"		    \
715 			STR(PTR)"\t7b, 11b\n\t"		    \
716 			STR(PTR)"\t8b, 11b\n\t"		    \
717 			".previous"			    \
718 			: "=&r" (value), "=r" (res)	    \
719 			: "r" (addr), "i" (-EFAULT));       \
720 } while(0)
721 #endif /* CONFIG_CPU_MIPSR6 */
722 
723 #define     _StoreHW(addr, value, res, type) \
724 do {                                                        \
725 		__asm__ __volatile__ (                      \
726 			".set\tnoat\n"                      \
727 			"1:\t"type##_sb("%1", "0(%2)")"\n"  \
728 			"srl\t$1,%1, 0x8\n"                 \
729 			"2:\t"type##_sb("$1", "1(%2)")"\n"  \
730 			".set\tat\n\t"                      \
731 			"li\t%0, 0\n"                       \
732 			"3:\n\t"                            \
733 			".insn\n\t"                         \
734 			".section\t.fixup,\"ax\"\n\t"       \
735 			"4:\tli\t%0, %3\n\t"                \
736 			"j\t3b\n\t"                         \
737 			".previous\n\t"                     \
738 			".section\t__ex_table,\"a\"\n\t"    \
739 			STR(PTR)"\t1b, 4b\n\t"              \
740 			STR(PTR)"\t2b, 4b\n\t"              \
741 			".previous"                         \
742 			: "=r" (res)                        \
743 			: "r" (value), "r" (addr), "i" (-EFAULT));\
744 } while(0)
745 
746 #ifndef CONFIG_CPU_MIPSR6
747 #define     _StoreW(addr, value, res, type)  \
748 do {                                                        \
749 		__asm__ __volatile__ (                      \
750 			"1:\t"type##_swl("%1", "3(%2)")"\n" \
751 			"2:\t"type##_swr("%1", "(%2)")"\n\t"\
752 			"li\t%0, 0\n"                       \
753 			"3:\n\t"                            \
754 			".insn\n\t"                         \
755 			".section\t.fixup,\"ax\"\n\t"       \
756 			"4:\tli\t%0, %3\n\t"                \
757 			"j\t3b\n\t"                         \
758 			".previous\n\t"                     \
759 			".section\t__ex_table,\"a\"\n\t"    \
760 			STR(PTR)"\t1b, 4b\n\t"              \
761 			STR(PTR)"\t2b, 4b\n\t"              \
762 			".previous"                         \
763 		: "=r" (res)                                \
764 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
765 } while(0)
766 
767 #define     _StoreDW(addr, value, res) \
768 do {                                                        \
769 		__asm__ __volatile__ (                      \
770 			"1:\tsdl\t%1, 7(%2)\n"              \
771 			"2:\tsdr\t%1, (%2)\n\t"             \
772 			"li\t%0, 0\n"                       \
773 			"3:\n\t"                            \
774 			".insn\n\t"                         \
775 			".section\t.fixup,\"ax\"\n\t"       \
776 			"4:\tli\t%0, %3\n\t"                \
777 			"j\t3b\n\t"                         \
778 			".previous\n\t"                     \
779 			".section\t__ex_table,\"a\"\n\t"    \
780 			STR(PTR)"\t1b, 4b\n\t"              \
781 			STR(PTR)"\t2b, 4b\n\t"              \
782 			".previous"                         \
783 		: "=r" (res)                                \
784 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
785 } while(0)
786 
787 #else
788 /* MIPSR6 has no swl and sdl instructions */
789 #define     _StoreW(addr, value, res, type)  \
790 do {                                                        \
791 		__asm__ __volatile__ (                      \
792 			".set\tpush\n\t"		    \
793 			".set\tnoat\n\t"		    \
794 			"1:"type##_sb("%1", "0(%2)")"\n\t"  \
795 			"srl\t$1, %1, 0x8\n\t"		    \
796 			"2:"type##_sb("$1", "1(%2)")"\n\t"  \
797 			"srl\t$1, $1,  0x8\n\t"		    \
798 			"3:"type##_sb("$1", "2(%2)")"\n\t"  \
799 			"srl\t$1, $1, 0x8\n\t"		    \
800 			"4:"type##_sb("$1", "3(%2)")"\n\t"  \
801 			".set\tpop\n\t"			    \
802 			"li\t%0, 0\n"			    \
803 			"10:\n\t"			    \
804 			".insn\n\t"			    \
805 			".section\t.fixup,\"ax\"\n\t"	    \
806 			"11:\tli\t%0, %3\n\t"		    \
807 			"j\t10b\n\t"			    \
808 			".previous\n\t"			    \
809 			".section\t__ex_table,\"a\"\n\t"    \
810 			STR(PTR)"\t1b, 11b\n\t"		    \
811 			STR(PTR)"\t2b, 11b\n\t"		    \
812 			STR(PTR)"\t3b, 11b\n\t"		    \
813 			STR(PTR)"\t4b, 11b\n\t"		    \
814 			".previous"			    \
815 		: "=&r" (res)			    	    \
816 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
817 		: "memory");                                \
818 } while(0)
819 
820 #define     _StoreDW(addr, value, res) \
821 do {                                                        \
822 		__asm__ __volatile__ (                      \
823 			".set\tpush\n\t"		    \
824 			".set\tnoat\n\t"		    \
825 			"1:sb\t%1, 0(%2)\n\t"    	    \
826 			"dsrl\t$1, %1, 0x8\n\t"		    \
827 			"2:sb\t$1, 1(%2)\n\t"    	    \
828 			"dsrl\t$1, $1, 0x8\n\t"		    \
829 			"3:sb\t$1, 2(%2)\n\t"    	    \
830 			"dsrl\t$1, $1, 0x8\n\t"		    \
831 			"4:sb\t$1, 3(%2)\n\t"    	    \
832 			"dsrl\t$1, $1, 0x8\n\t"		    \
833 			"5:sb\t$1, 4(%2)\n\t"    	    \
834 			"dsrl\t$1, $1, 0x8\n\t"		    \
835 			"6:sb\t$1, 5(%2)\n\t"    	    \
836 			"dsrl\t$1, $1, 0x8\n\t"		    \
837 			"7:sb\t$1, 6(%2)\n\t"    	    \
838 			"dsrl\t$1, $1, 0x8\n\t"		    \
839 			"8:sb\t$1, 7(%2)\n\t"    	    \
840 			"dsrl\t$1, $1, 0x8\n\t"		    \
841 			".set\tpop\n\t"			    \
842 			"li\t%0, 0\n"			    \
843 			"10:\n\t"			    \
844 			".insn\n\t"			    \
845 			".section\t.fixup,\"ax\"\n\t"	    \
846 			"11:\tli\t%0, %3\n\t"		    \
847 			"j\t10b\n\t"			    \
848 			".previous\n\t"			    \
849 			".section\t__ex_table,\"a\"\n\t"    \
850 			STR(PTR)"\t1b, 11b\n\t"		    \
851 			STR(PTR)"\t2b, 11b\n\t"		    \
852 			STR(PTR)"\t3b, 11b\n\t"		    \
853 			STR(PTR)"\t4b, 11b\n\t"		    \
854 			STR(PTR)"\t5b, 11b\n\t"		    \
855 			STR(PTR)"\t6b, 11b\n\t"		    \
856 			STR(PTR)"\t7b, 11b\n\t"		    \
857 			STR(PTR)"\t8b, 11b\n\t"		    \
858 			".previous"			    \
859 		: "=&r" (res)			    	    \
860 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
861 		: "memory");                                \
862 } while(0)
863 
864 #endif /* CONFIG_CPU_MIPSR6 */
865 #endif
866 
867 #define LoadHWU(addr, value, res)	_LoadHWU(addr, value, res, kernel)
868 #define LoadHWUE(addr, value, res)	_LoadHWU(addr, value, res, user)
869 #define LoadWU(addr, value, res)	_LoadWU(addr, value, res, kernel)
870 #define LoadWUE(addr, value, res)	_LoadWU(addr, value, res, user)
871 #define LoadHW(addr, value, res)	_LoadHW(addr, value, res, kernel)
872 #define LoadHWE(addr, value, res)	_LoadHW(addr, value, res, user)
873 #define LoadW(addr, value, res)		_LoadW(addr, value, res, kernel)
874 #define LoadWE(addr, value, res)	_LoadW(addr, value, res, user)
875 #define LoadDW(addr, value, res)	_LoadDW(addr, value, res)
876 
877 #define StoreHW(addr, value, res)	_StoreHW(addr, value, res, kernel)
878 #define StoreHWE(addr, value, res)	_StoreHW(addr, value, res, user)
879 #define StoreW(addr, value, res)	_StoreW(addr, value, res, kernel)
880 #define StoreWE(addr, value, res)	_StoreW(addr, value, res, user)
881 #define StoreDW(addr, value, res)	_StoreDW(addr, value, res)
882 
883 static void emulate_load_store_insn(struct pt_regs *regs,
884 	void __user *addr, unsigned int __user *pc)
885 {
886 	union mips_instruction insn;
887 	unsigned long value;
888 	unsigned int res, preempted;
889 	unsigned long origpc;
890 	unsigned long orig31;
891 	void __user *fault_addr = NULL;
892 #ifdef	CONFIG_EVA
893 	mm_segment_t seg;
894 #endif
895 	union fpureg *fpr;
896 	enum msa_2b_fmt df;
897 	unsigned int wd;
898 	origpc = (unsigned long)pc;
899 	orig31 = regs->regs[31];
900 
901 	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
902 
903 	/*
904 	 * This load never faults.
905 	 */
906 	__get_user(insn.word, pc);
907 
908 	switch (insn.i_format.opcode) {
909 		/*
910 		 * These are instructions that a compiler doesn't generate.  We
911 		 * can assume therefore that the code is MIPS-aware and
912 		 * really buggy.  Emulating these instructions would break the
913 		 * semantics anyway.
914 		 */
915 	case ll_op:
916 	case lld_op:
917 	case sc_op:
918 	case scd_op:
919 
920 		/*
921 		 * For these instructions the only way to create an address
922 		 * error is an attempted access to kernel/supervisor address
923 		 * space.
924 		 */
925 	case ldl_op:
926 	case ldr_op:
927 	case lwl_op:
928 	case lwr_op:
929 	case sdl_op:
930 	case sdr_op:
931 	case swl_op:
932 	case swr_op:
933 	case lb_op:
934 	case lbu_op:
935 	case sb_op:
936 		goto sigbus;
937 
938 		/*
939 		 * The remaining opcodes are the ones that are really of
940 		 * interest.
941 		 */
942 	case spec3_op:
943 		if (insn.dsp_format.func == lx_op) {
944 			switch (insn.dsp_format.op) {
945 			case lwx_op:
946 				if (!access_ok(VERIFY_READ, addr, 4))
947 					goto sigbus;
948 				LoadW(addr, value, res);
949 				if (res)
950 					goto fault;
951 				compute_return_epc(regs);
952 				regs->regs[insn.dsp_format.rd] = value;
953 				break;
954 			case lhx_op:
955 				if (!access_ok(VERIFY_READ, addr, 2))
956 					goto sigbus;
957 				LoadHW(addr, value, res);
958 				if (res)
959 					goto fault;
960 				compute_return_epc(regs);
961 				regs->regs[insn.dsp_format.rd] = value;
962 				break;
963 			default:
964 				goto sigill;
965 			}
966 		}
967 #ifdef CONFIG_EVA
968 		else {
969 			/*
970 			 * we can land here only from kernel accessing user
971 			 * memory, so we need to "switch" the address limit to
972 			 * user space, so that address check can work properly.
973 			 */
974 			seg = get_fs();
975 			set_fs(USER_DS);
976 			switch (insn.spec3_format.func) {
977 			case lhe_op:
978 				if (!access_ok(VERIFY_READ, addr, 2)) {
979 					set_fs(seg);
980 					goto sigbus;
981 				}
982 				LoadHWE(addr, value, res);
983 				if (res) {
984 					set_fs(seg);
985 					goto fault;
986 				}
987 				compute_return_epc(regs);
988 				regs->regs[insn.spec3_format.rt] = value;
989 				break;
990 			case lwe_op:
991 				if (!access_ok(VERIFY_READ, addr, 4)) {
992 					set_fs(seg);
993 					goto sigbus;
994 				}
995 				LoadWE(addr, value, res);
996 				if (res) {
997 					set_fs(seg);
998 					goto fault;
999 				}
1000 				compute_return_epc(regs);
1001 				regs->regs[insn.spec3_format.rt] = value;
1002 				break;
1003 			case lhue_op:
1004 				if (!access_ok(VERIFY_READ, addr, 2)) {
1005 					set_fs(seg);
1006 					goto sigbus;
1007 				}
1008 				LoadHWUE(addr, value, res);
1009 				if (res) {
1010 					set_fs(seg);
1011 					goto fault;
1012 				}
1013 				compute_return_epc(regs);
1014 				regs->regs[insn.spec3_format.rt] = value;
1015 				break;
1016 			case she_op:
1017 				if (!access_ok(VERIFY_WRITE, addr, 2)) {
1018 					set_fs(seg);
1019 					goto sigbus;
1020 				}
1021 				compute_return_epc(regs);
1022 				value = regs->regs[insn.spec3_format.rt];
1023 				StoreHWE(addr, value, res);
1024 				if (res) {
1025 					set_fs(seg);
1026 					goto fault;
1027 				}
1028 				break;
1029 			case swe_op:
1030 				if (!access_ok(VERIFY_WRITE, addr, 4)) {
1031 					set_fs(seg);
1032 					goto sigbus;
1033 				}
1034 				compute_return_epc(regs);
1035 				value = regs->regs[insn.spec3_format.rt];
1036 				StoreWE(addr, value, res);
1037 				if (res) {
1038 					set_fs(seg);
1039 					goto fault;
1040 				}
1041 				break;
1042 			default:
1043 				set_fs(seg);
1044 				goto sigill;
1045 			}
1046 			set_fs(seg);
1047 		}
1048 #endif
1049 		break;
1050 	case lh_op:
1051 		if (!access_ok(VERIFY_READ, addr, 2))
1052 			goto sigbus;
1053 
1054 		if (IS_ENABLED(CONFIG_EVA)) {
1055 			if (uaccess_kernel())
1056 				LoadHW(addr, value, res);
1057 			else
1058 				LoadHWE(addr, value, res);
1059 		} else {
1060 			LoadHW(addr, value, res);
1061 		}
1062 
1063 		if (res)
1064 			goto fault;
1065 		compute_return_epc(regs);
1066 		regs->regs[insn.i_format.rt] = value;
1067 		break;
1068 
1069 	case lw_op:
1070 		if (!access_ok(VERIFY_READ, addr, 4))
1071 			goto sigbus;
1072 
1073 		if (IS_ENABLED(CONFIG_EVA)) {
1074 			if (uaccess_kernel())
1075 				LoadW(addr, value, res);
1076 			else
1077 				LoadWE(addr, value, res);
1078 		} else {
1079 			LoadW(addr, value, res);
1080 		}
1081 
1082 		if (res)
1083 			goto fault;
1084 		compute_return_epc(regs);
1085 		regs->regs[insn.i_format.rt] = value;
1086 		break;
1087 
1088 	case lhu_op:
1089 		if (!access_ok(VERIFY_READ, addr, 2))
1090 			goto sigbus;
1091 
1092 		if (IS_ENABLED(CONFIG_EVA)) {
1093 			if (uaccess_kernel())
1094 				LoadHWU(addr, value, res);
1095 			else
1096 				LoadHWUE(addr, value, res);
1097 		} else {
1098 			LoadHWU(addr, value, res);
1099 		}
1100 
1101 		if (res)
1102 			goto fault;
1103 		compute_return_epc(regs);
1104 		regs->regs[insn.i_format.rt] = value;
1105 		break;
1106 
1107 	case lwu_op:
1108 #ifdef CONFIG_64BIT
1109 		/*
1110 		 * A 32-bit kernel might be running on a 64-bit processor.  But
1111 		 * if we're on a 32-bit processor and an i-cache incoherency
1112 		 * or race makes us see a 64-bit instruction here the sdl/sdr
1113 		 * would blow up, so for now we don't handle unaligned 64-bit
1114 		 * instructions on 32-bit kernels.
1115 		 */
1116 		if (!access_ok(VERIFY_READ, addr, 4))
1117 			goto sigbus;
1118 
1119 		LoadWU(addr, value, res);
1120 		if (res)
1121 			goto fault;
1122 		compute_return_epc(regs);
1123 		regs->regs[insn.i_format.rt] = value;
1124 		break;
1125 #endif /* CONFIG_64BIT */
1126 
1127 		/* Cannot handle 64-bit instructions in 32-bit kernel */
1128 		goto sigill;
1129 
1130 	case ld_op:
1131 #ifdef CONFIG_64BIT
1132 		/*
1133 		 * A 32-bit kernel might be running on a 64-bit processor.  But
1134 		 * if we're on a 32-bit processor and an i-cache incoherency
1135 		 * or race makes us see a 64-bit instruction here the sdl/sdr
1136 		 * would blow up, so for now we don't handle unaligned 64-bit
1137 		 * instructions on 32-bit kernels.
1138 		 */
1139 		if (!access_ok(VERIFY_READ, addr, 8))
1140 			goto sigbus;
1141 
1142 		LoadDW(addr, value, res);
1143 		if (res)
1144 			goto fault;
1145 		compute_return_epc(regs);
1146 		regs->regs[insn.i_format.rt] = value;
1147 		break;
1148 #endif /* CONFIG_64BIT */
1149 
1150 		/* Cannot handle 64-bit instructions in 32-bit kernel */
1151 		goto sigill;
1152 
1153 	case sh_op:
1154 		if (!access_ok(VERIFY_WRITE, addr, 2))
1155 			goto sigbus;
1156 
1157 		compute_return_epc(regs);
1158 		value = regs->regs[insn.i_format.rt];
1159 
1160 		if (IS_ENABLED(CONFIG_EVA)) {
1161 			if (uaccess_kernel())
1162 				StoreHW(addr, value, res);
1163 			else
1164 				StoreHWE(addr, value, res);
1165 		} else {
1166 			StoreHW(addr, value, res);
1167 		}
1168 
1169 		if (res)
1170 			goto fault;
1171 		break;
1172 
1173 	case sw_op:
1174 		if (!access_ok(VERIFY_WRITE, addr, 4))
1175 			goto sigbus;
1176 
1177 		compute_return_epc(regs);
1178 		value = regs->regs[insn.i_format.rt];
1179 
1180 		if (IS_ENABLED(CONFIG_EVA)) {
1181 			if (uaccess_kernel())
1182 				StoreW(addr, value, res);
1183 			else
1184 				StoreWE(addr, value, res);
1185 		} else {
1186 			StoreW(addr, value, res);
1187 		}
1188 
1189 		if (res)
1190 			goto fault;
1191 		break;
1192 
1193 	case sd_op:
1194 #ifdef CONFIG_64BIT
1195 		/*
1196 		 * A 32-bit kernel might be running on a 64-bit processor.  But
1197 		 * if we're on a 32-bit processor and an i-cache incoherency
1198 		 * or race makes us see a 64-bit instruction here the sdl/sdr
1199 		 * would blow up, so for now we don't handle unaligned 64-bit
1200 		 * instructions on 32-bit kernels.
1201 		 */
1202 		if (!access_ok(VERIFY_WRITE, addr, 8))
1203 			goto sigbus;
1204 
1205 		compute_return_epc(regs);
1206 		value = regs->regs[insn.i_format.rt];
1207 		StoreDW(addr, value, res);
1208 		if (res)
1209 			goto fault;
1210 		break;
1211 #endif /* CONFIG_64BIT */
1212 
1213 		/* Cannot handle 64-bit instructions in 32-bit kernel */
1214 		goto sigill;
1215 
1216 	case lwc1_op:
1217 	case ldc1_op:
1218 	case swc1_op:
1219 	case sdc1_op:
1220 	case cop1x_op:
1221 		die_if_kernel("Unaligned FP access in kernel code", regs);
1222 		BUG_ON(!used_math());
1223 
1224 		lose_fpu(1);	/* Save FPU state for the emulator. */
1225 		res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
1226 					       &fault_addr);
1227 		own_fpu(1);	/* Restore FPU state. */
1228 
1229 		/* Signal if something went wrong. */
1230 		process_fpemu_return(res, fault_addr, 0);
1231 
1232 		if (res == 0)
1233 			break;
1234 		return;
1235 
1236 	case msa_op:
1237 		if (!cpu_has_msa)
1238 			goto sigill;
1239 
1240 		/*
1241 		 * If we've reached this point then userland should have taken
1242 		 * the MSA disabled exception & initialised vector context at
1243 		 * some point in the past.
1244 		 */
1245 		BUG_ON(!thread_msa_context_live());
1246 
1247 		df = insn.msa_mi10_format.df;
1248 		wd = insn.msa_mi10_format.wd;
1249 		fpr = &current->thread.fpu.fpr[wd];
1250 
1251 		switch (insn.msa_mi10_format.func) {
1252 		case msa_ld_op:
1253 			if (!access_ok(VERIFY_READ, addr, sizeof(*fpr)))
1254 				goto sigbus;
1255 
1256 			do {
1257 				/*
1258 				 * If we have live MSA context keep track of
1259 				 * whether we get preempted in order to avoid
1260 				 * the register context we load being clobbered
1261 				 * by the live context as it's saved during
1262 				 * preemption. If we don't have live context
1263 				 * then it can't be saved to clobber the value
1264 				 * we load.
1265 				 */
1266 				preempted = test_thread_flag(TIF_USEDMSA);
1267 
1268 				res = __copy_from_user_inatomic(fpr, addr,
1269 								sizeof(*fpr));
1270 				if (res)
1271 					goto fault;
1272 
1273 				/*
1274 				 * Update the hardware register if it is in use
1275 				 * by the task in this quantum, in order to
1276 				 * avoid having to save & restore the whole
1277 				 * vector context.
1278 				 */
1279 				preempt_disable();
1280 				if (test_thread_flag(TIF_USEDMSA)) {
1281 					write_msa_wr(wd, fpr, df);
1282 					preempted = 0;
1283 				}
1284 				preempt_enable();
1285 			} while (preempted);
1286 			break;
1287 
1288 		case msa_st_op:
1289 			if (!access_ok(VERIFY_WRITE, addr, sizeof(*fpr)))
1290 				goto sigbus;
1291 
1292 			/*
1293 			 * Update from the hardware register if it is in use by
1294 			 * the task in this quantum, in order to avoid having to
1295 			 * save & restore the whole vector context.
1296 			 */
1297 			preempt_disable();
1298 			if (test_thread_flag(TIF_USEDMSA))
1299 				read_msa_wr(wd, fpr, df);
1300 			preempt_enable();
1301 
1302 			res = __copy_to_user_inatomic(addr, fpr, sizeof(*fpr));
1303 			if (res)
1304 				goto fault;
1305 			break;
1306 
1307 		default:
1308 			goto sigbus;
1309 		}
1310 
1311 		compute_return_epc(regs);
1312 		break;
1313 
1314 #ifndef CONFIG_CPU_MIPSR6
1315 	/*
1316 	 * COP2 is available to implementor for application specific use.
1317 	 * It's up to applications to register a notifier chain and do
1318 	 * whatever they have to do, including possible sending of signals.
1319 	 *
1320 	 * This instruction has been reallocated in Release 6
1321 	 */
1322 	case lwc2_op:
1323 		cu2_notifier_call_chain(CU2_LWC2_OP, regs);
1324 		break;
1325 
1326 	case ldc2_op:
1327 		cu2_notifier_call_chain(CU2_LDC2_OP, regs);
1328 		break;
1329 
1330 	case swc2_op:
1331 		cu2_notifier_call_chain(CU2_SWC2_OP, regs);
1332 		break;
1333 
1334 	case sdc2_op:
1335 		cu2_notifier_call_chain(CU2_SDC2_OP, regs);
1336 		break;
1337 #endif
1338 	default:
1339 		/*
1340 		 * Pheeee...  We encountered an yet unknown instruction or
1341 		 * cache coherence problem.  Die sucker, die ...
1342 		 */
1343 		goto sigill;
1344 	}
1345 
1346 #ifdef CONFIG_DEBUG_FS
1347 	unaligned_instructions++;
1348 #endif
1349 
1350 	return;
1351 
1352 fault:
1353 	/* roll back jump/branch */
1354 	regs->cp0_epc = origpc;
1355 	regs->regs[31] = orig31;
1356 	/* Did we have an exception handler installed? */
1357 	if (fixup_exception(regs))
1358 		return;
1359 
1360 	die_if_kernel("Unhandled kernel unaligned access", regs);
1361 	force_sig(SIGSEGV, current);
1362 
1363 	return;
1364 
1365 sigbus:
1366 	die_if_kernel("Unhandled kernel unaligned access", regs);
1367 	force_sig(SIGBUS, current);
1368 
1369 	return;
1370 
1371 sigill:
1372 	die_if_kernel
1373 	    ("Unhandled kernel unaligned access or invalid instruction", regs);
1374 	force_sig(SIGILL, current);
1375 }
1376 
1377 /* Recode table from 16-bit register notation to 32-bit GPR. */
1378 const int reg16to32[] = { 16, 17, 2, 3, 4, 5, 6, 7 };
1379 
1380 /* Recode table from 16-bit STORE register notation to 32-bit GPR. */
1381 static const int reg16to32st[] = { 0, 17, 2, 3, 4, 5, 6, 7 };
1382 
1383 static void emulate_load_store_microMIPS(struct pt_regs *regs,
1384 					 void __user *addr)
1385 {
1386 	unsigned long value;
1387 	unsigned int res;
1388 	int i;
1389 	unsigned int reg = 0, rvar;
1390 	unsigned long orig31;
1391 	u16 __user *pc16;
1392 	u16 halfword;
1393 	unsigned int word;
1394 	unsigned long origpc, contpc;
1395 	union mips_instruction insn;
1396 	struct mm_decoded_insn mminsn;
1397 	void __user *fault_addr = NULL;
1398 
1399 	origpc = regs->cp0_epc;
1400 	orig31 = regs->regs[31];
1401 
1402 	mminsn.micro_mips_mode = 1;
1403 
1404 	/*
1405 	 * This load never faults.
1406 	 */
1407 	pc16 = (unsigned short __user *)msk_isa16_mode(regs->cp0_epc);
1408 	__get_user(halfword, pc16);
1409 	pc16++;
1410 	contpc = regs->cp0_epc + 2;
1411 	word = ((unsigned int)halfword << 16);
1412 	mminsn.pc_inc = 2;
1413 
1414 	if (!mm_insn_16bit(halfword)) {
1415 		__get_user(halfword, pc16);
1416 		pc16++;
1417 		contpc = regs->cp0_epc + 4;
1418 		mminsn.pc_inc = 4;
1419 		word |= halfword;
1420 	}
1421 	mminsn.insn = word;
1422 
1423 	if (get_user(halfword, pc16))
1424 		goto fault;
1425 	mminsn.next_pc_inc = 2;
1426 	word = ((unsigned int)halfword << 16);
1427 
1428 	if (!mm_insn_16bit(halfword)) {
1429 		pc16++;
1430 		if (get_user(halfword, pc16))
1431 			goto fault;
1432 		mminsn.next_pc_inc = 4;
1433 		word |= halfword;
1434 	}
1435 	mminsn.next_insn = word;
1436 
1437 	insn = (union mips_instruction)(mminsn.insn);
1438 	if (mm_isBranchInstr(regs, mminsn, &contpc))
1439 		insn = (union mips_instruction)(mminsn.next_insn);
1440 
1441 	/*  Parse instruction to find what to do */
1442 
1443 	switch (insn.mm_i_format.opcode) {
1444 
1445 	case mm_pool32a_op:
1446 		switch (insn.mm_x_format.func) {
1447 		case mm_lwxs_op:
1448 			reg = insn.mm_x_format.rd;
1449 			goto loadW;
1450 		}
1451 
1452 		goto sigbus;
1453 
1454 	case mm_pool32b_op:
1455 		switch (insn.mm_m_format.func) {
1456 		case mm_lwp_func:
1457 			reg = insn.mm_m_format.rd;
1458 			if (reg == 31)
1459 				goto sigbus;
1460 
1461 			if (!access_ok(VERIFY_READ, addr, 8))
1462 				goto sigbus;
1463 
1464 			LoadW(addr, value, res);
1465 			if (res)
1466 				goto fault;
1467 			regs->regs[reg] = value;
1468 			addr += 4;
1469 			LoadW(addr, value, res);
1470 			if (res)
1471 				goto fault;
1472 			regs->regs[reg + 1] = value;
1473 			goto success;
1474 
1475 		case mm_swp_func:
1476 			reg = insn.mm_m_format.rd;
1477 			if (reg == 31)
1478 				goto sigbus;
1479 
1480 			if (!access_ok(VERIFY_WRITE, addr, 8))
1481 				goto sigbus;
1482 
1483 			value = regs->regs[reg];
1484 			StoreW(addr, value, res);
1485 			if (res)
1486 				goto fault;
1487 			addr += 4;
1488 			value = regs->regs[reg + 1];
1489 			StoreW(addr, value, res);
1490 			if (res)
1491 				goto fault;
1492 			goto success;
1493 
1494 		case mm_ldp_func:
1495 #ifdef CONFIG_64BIT
1496 			reg = insn.mm_m_format.rd;
1497 			if (reg == 31)
1498 				goto sigbus;
1499 
1500 			if (!access_ok(VERIFY_READ, addr, 16))
1501 				goto sigbus;
1502 
1503 			LoadDW(addr, value, res);
1504 			if (res)
1505 				goto fault;
1506 			regs->regs[reg] = value;
1507 			addr += 8;
1508 			LoadDW(addr, value, res);
1509 			if (res)
1510 				goto fault;
1511 			regs->regs[reg + 1] = value;
1512 			goto success;
1513 #endif /* CONFIG_64BIT */
1514 
1515 			goto sigill;
1516 
1517 		case mm_sdp_func:
1518 #ifdef CONFIG_64BIT
1519 			reg = insn.mm_m_format.rd;
1520 			if (reg == 31)
1521 				goto sigbus;
1522 
1523 			if (!access_ok(VERIFY_WRITE, addr, 16))
1524 				goto sigbus;
1525 
1526 			value = regs->regs[reg];
1527 			StoreDW(addr, value, res);
1528 			if (res)
1529 				goto fault;
1530 			addr += 8;
1531 			value = regs->regs[reg + 1];
1532 			StoreDW(addr, value, res);
1533 			if (res)
1534 				goto fault;
1535 			goto success;
1536 #endif /* CONFIG_64BIT */
1537 
1538 			goto sigill;
1539 
1540 		case mm_lwm32_func:
1541 			reg = insn.mm_m_format.rd;
1542 			rvar = reg & 0xf;
1543 			if ((rvar > 9) || !reg)
1544 				goto sigill;
1545 			if (reg & 0x10) {
1546 				if (!access_ok
1547 				    (VERIFY_READ, addr, 4 * (rvar + 1)))
1548 					goto sigbus;
1549 			} else {
1550 				if (!access_ok(VERIFY_READ, addr, 4 * rvar))
1551 					goto sigbus;
1552 			}
1553 			if (rvar == 9)
1554 				rvar = 8;
1555 			for (i = 16; rvar; rvar--, i++) {
1556 				LoadW(addr, value, res);
1557 				if (res)
1558 					goto fault;
1559 				addr += 4;
1560 				regs->regs[i] = value;
1561 			}
1562 			if ((reg & 0xf) == 9) {
1563 				LoadW(addr, value, res);
1564 				if (res)
1565 					goto fault;
1566 				addr += 4;
1567 				regs->regs[30] = value;
1568 			}
1569 			if (reg & 0x10) {
1570 				LoadW(addr, value, res);
1571 				if (res)
1572 					goto fault;
1573 				regs->regs[31] = value;
1574 			}
1575 			goto success;
1576 
1577 		case mm_swm32_func:
1578 			reg = insn.mm_m_format.rd;
1579 			rvar = reg & 0xf;
1580 			if ((rvar > 9) || !reg)
1581 				goto sigill;
1582 			if (reg & 0x10) {
1583 				if (!access_ok
1584 				    (VERIFY_WRITE, addr, 4 * (rvar + 1)))
1585 					goto sigbus;
1586 			} else {
1587 				if (!access_ok(VERIFY_WRITE, addr, 4 * rvar))
1588 					goto sigbus;
1589 			}
1590 			if (rvar == 9)
1591 				rvar = 8;
1592 			for (i = 16; rvar; rvar--, i++) {
1593 				value = regs->regs[i];
1594 				StoreW(addr, value, res);
1595 				if (res)
1596 					goto fault;
1597 				addr += 4;
1598 			}
1599 			if ((reg & 0xf) == 9) {
1600 				value = regs->regs[30];
1601 				StoreW(addr, value, res);
1602 				if (res)
1603 					goto fault;
1604 				addr += 4;
1605 			}
1606 			if (reg & 0x10) {
1607 				value = regs->regs[31];
1608 				StoreW(addr, value, res);
1609 				if (res)
1610 					goto fault;
1611 			}
1612 			goto success;
1613 
1614 		case mm_ldm_func:
1615 #ifdef CONFIG_64BIT
1616 			reg = insn.mm_m_format.rd;
1617 			rvar = reg & 0xf;
1618 			if ((rvar > 9) || !reg)
1619 				goto sigill;
1620 			if (reg & 0x10) {
1621 				if (!access_ok
1622 				    (VERIFY_READ, addr, 8 * (rvar + 1)))
1623 					goto sigbus;
1624 			} else {
1625 				if (!access_ok(VERIFY_READ, addr, 8 * rvar))
1626 					goto sigbus;
1627 			}
1628 			if (rvar == 9)
1629 				rvar = 8;
1630 
1631 			for (i = 16; rvar; rvar--, i++) {
1632 				LoadDW(addr, value, res);
1633 				if (res)
1634 					goto fault;
1635 				addr += 4;
1636 				regs->regs[i] = value;
1637 			}
1638 			if ((reg & 0xf) == 9) {
1639 				LoadDW(addr, value, res);
1640 				if (res)
1641 					goto fault;
1642 				addr += 8;
1643 				regs->regs[30] = value;
1644 			}
1645 			if (reg & 0x10) {
1646 				LoadDW(addr, value, res);
1647 				if (res)
1648 					goto fault;
1649 				regs->regs[31] = value;
1650 			}
1651 			goto success;
1652 #endif /* CONFIG_64BIT */
1653 
1654 			goto sigill;
1655 
1656 		case mm_sdm_func:
1657 #ifdef CONFIG_64BIT
1658 			reg = insn.mm_m_format.rd;
1659 			rvar = reg & 0xf;
1660 			if ((rvar > 9) || !reg)
1661 				goto sigill;
1662 			if (reg & 0x10) {
1663 				if (!access_ok
1664 				    (VERIFY_WRITE, addr, 8 * (rvar + 1)))
1665 					goto sigbus;
1666 			} else {
1667 				if (!access_ok(VERIFY_WRITE, addr, 8 * rvar))
1668 					goto sigbus;
1669 			}
1670 			if (rvar == 9)
1671 				rvar = 8;
1672 
1673 			for (i = 16; rvar; rvar--, i++) {
1674 				value = regs->regs[i];
1675 				StoreDW(addr, value, res);
1676 				if (res)
1677 					goto fault;
1678 				addr += 8;
1679 			}
1680 			if ((reg & 0xf) == 9) {
1681 				value = regs->regs[30];
1682 				StoreDW(addr, value, res);
1683 				if (res)
1684 					goto fault;
1685 				addr += 8;
1686 			}
1687 			if (reg & 0x10) {
1688 				value = regs->regs[31];
1689 				StoreDW(addr, value, res);
1690 				if (res)
1691 					goto fault;
1692 			}
1693 			goto success;
1694 #endif /* CONFIG_64BIT */
1695 
1696 			goto sigill;
1697 
1698 			/*  LWC2, SWC2, LDC2, SDC2 are not serviced */
1699 		}
1700 
1701 		goto sigbus;
1702 
1703 	case mm_pool32c_op:
1704 		switch (insn.mm_m_format.func) {
1705 		case mm_lwu_func:
1706 			reg = insn.mm_m_format.rd;
1707 			goto loadWU;
1708 		}
1709 
1710 		/*  LL,SC,LLD,SCD are not serviced */
1711 		goto sigbus;
1712 
1713 	case mm_pool32f_op:
1714 		switch (insn.mm_x_format.func) {
1715 		case mm_lwxc1_func:
1716 		case mm_swxc1_func:
1717 		case mm_ldxc1_func:
1718 		case mm_sdxc1_func:
1719 			goto fpu_emul;
1720 		}
1721 
1722 		goto sigbus;
1723 
1724 	case mm_ldc132_op:
1725 	case mm_sdc132_op:
1726 	case mm_lwc132_op:
1727 	case mm_swc132_op:
1728 fpu_emul:
1729 		/* roll back jump/branch */
1730 		regs->cp0_epc = origpc;
1731 		regs->regs[31] = orig31;
1732 
1733 		die_if_kernel("Unaligned FP access in kernel code", regs);
1734 		BUG_ON(!used_math());
1735 		BUG_ON(!is_fpu_owner());
1736 
1737 		lose_fpu(1);	/* save the FPU state for the emulator */
1738 		res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
1739 					       &fault_addr);
1740 		own_fpu(1);	/* restore FPU state */
1741 
1742 		/* If something went wrong, signal */
1743 		process_fpemu_return(res, fault_addr, 0);
1744 
1745 		if (res == 0)
1746 			goto success;
1747 		return;
1748 
1749 	case mm_lh32_op:
1750 		reg = insn.mm_i_format.rt;
1751 		goto loadHW;
1752 
1753 	case mm_lhu32_op:
1754 		reg = insn.mm_i_format.rt;
1755 		goto loadHWU;
1756 
1757 	case mm_lw32_op:
1758 		reg = insn.mm_i_format.rt;
1759 		goto loadW;
1760 
1761 	case mm_sh32_op:
1762 		reg = insn.mm_i_format.rt;
1763 		goto storeHW;
1764 
1765 	case mm_sw32_op:
1766 		reg = insn.mm_i_format.rt;
1767 		goto storeW;
1768 
1769 	case mm_ld32_op:
1770 		reg = insn.mm_i_format.rt;
1771 		goto loadDW;
1772 
1773 	case mm_sd32_op:
1774 		reg = insn.mm_i_format.rt;
1775 		goto storeDW;
1776 
1777 	case mm_pool16c_op:
1778 		switch (insn.mm16_m_format.func) {
1779 		case mm_lwm16_op:
1780 			reg = insn.mm16_m_format.rlist;
1781 			rvar = reg + 1;
1782 			if (!access_ok(VERIFY_READ, addr, 4 * rvar))
1783 				goto sigbus;
1784 
1785 			for (i = 16; rvar; rvar--, i++) {
1786 				LoadW(addr, value, res);
1787 				if (res)
1788 					goto fault;
1789 				addr += 4;
1790 				regs->regs[i] = value;
1791 			}
1792 			LoadW(addr, value, res);
1793 			if (res)
1794 				goto fault;
1795 			regs->regs[31] = value;
1796 
1797 			goto success;
1798 
1799 		case mm_swm16_op:
1800 			reg = insn.mm16_m_format.rlist;
1801 			rvar = reg + 1;
1802 			if (!access_ok(VERIFY_WRITE, addr, 4 * rvar))
1803 				goto sigbus;
1804 
1805 			for (i = 16; rvar; rvar--, i++) {
1806 				value = regs->regs[i];
1807 				StoreW(addr, value, res);
1808 				if (res)
1809 					goto fault;
1810 				addr += 4;
1811 			}
1812 			value = regs->regs[31];
1813 			StoreW(addr, value, res);
1814 			if (res)
1815 				goto fault;
1816 
1817 			goto success;
1818 
1819 		}
1820 
1821 		goto sigbus;
1822 
1823 	case mm_lhu16_op:
1824 		reg = reg16to32[insn.mm16_rb_format.rt];
1825 		goto loadHWU;
1826 
1827 	case mm_lw16_op:
1828 		reg = reg16to32[insn.mm16_rb_format.rt];
1829 		goto loadW;
1830 
1831 	case mm_sh16_op:
1832 		reg = reg16to32st[insn.mm16_rb_format.rt];
1833 		goto storeHW;
1834 
1835 	case mm_sw16_op:
1836 		reg = reg16to32st[insn.mm16_rb_format.rt];
1837 		goto storeW;
1838 
1839 	case mm_lwsp16_op:
1840 		reg = insn.mm16_r5_format.rt;
1841 		goto loadW;
1842 
1843 	case mm_swsp16_op:
1844 		reg = insn.mm16_r5_format.rt;
1845 		goto storeW;
1846 
1847 	case mm_lwgp16_op:
1848 		reg = reg16to32[insn.mm16_r3_format.rt];
1849 		goto loadW;
1850 
1851 	default:
1852 		goto sigill;
1853 	}
1854 
1855 loadHW:
1856 	if (!access_ok(VERIFY_READ, addr, 2))
1857 		goto sigbus;
1858 
1859 	LoadHW(addr, value, res);
1860 	if (res)
1861 		goto fault;
1862 	regs->regs[reg] = value;
1863 	goto success;
1864 
1865 loadHWU:
1866 	if (!access_ok(VERIFY_READ, addr, 2))
1867 		goto sigbus;
1868 
1869 	LoadHWU(addr, value, res);
1870 	if (res)
1871 		goto fault;
1872 	regs->regs[reg] = value;
1873 	goto success;
1874 
1875 loadW:
1876 	if (!access_ok(VERIFY_READ, addr, 4))
1877 		goto sigbus;
1878 
1879 	LoadW(addr, value, res);
1880 	if (res)
1881 		goto fault;
1882 	regs->regs[reg] = value;
1883 	goto success;
1884 
1885 loadWU:
1886 #ifdef CONFIG_64BIT
1887 	/*
1888 	 * A 32-bit kernel might be running on a 64-bit processor.  But
1889 	 * if we're on a 32-bit processor and an i-cache incoherency
1890 	 * or race makes us see a 64-bit instruction here the sdl/sdr
1891 	 * would blow up, so for now we don't handle unaligned 64-bit
1892 	 * instructions on 32-bit kernels.
1893 	 */
1894 	if (!access_ok(VERIFY_READ, addr, 4))
1895 		goto sigbus;
1896 
1897 	LoadWU(addr, value, res);
1898 	if (res)
1899 		goto fault;
1900 	regs->regs[reg] = value;
1901 	goto success;
1902 #endif /* CONFIG_64BIT */
1903 
1904 	/* Cannot handle 64-bit instructions in 32-bit kernel */
1905 	goto sigill;
1906 
1907 loadDW:
1908 #ifdef CONFIG_64BIT
1909 	/*
1910 	 * A 32-bit kernel might be running on a 64-bit processor.  But
1911 	 * if we're on a 32-bit processor and an i-cache incoherency
1912 	 * or race makes us see a 64-bit instruction here the sdl/sdr
1913 	 * would blow up, so for now we don't handle unaligned 64-bit
1914 	 * instructions on 32-bit kernels.
1915 	 */
1916 	if (!access_ok(VERIFY_READ, addr, 8))
1917 		goto sigbus;
1918 
1919 	LoadDW(addr, value, res);
1920 	if (res)
1921 		goto fault;
1922 	regs->regs[reg] = value;
1923 	goto success;
1924 #endif /* CONFIG_64BIT */
1925 
1926 	/* Cannot handle 64-bit instructions in 32-bit kernel */
1927 	goto sigill;
1928 
1929 storeHW:
1930 	if (!access_ok(VERIFY_WRITE, addr, 2))
1931 		goto sigbus;
1932 
1933 	value = regs->regs[reg];
1934 	StoreHW(addr, value, res);
1935 	if (res)
1936 		goto fault;
1937 	goto success;
1938 
1939 storeW:
1940 	if (!access_ok(VERIFY_WRITE, addr, 4))
1941 		goto sigbus;
1942 
1943 	value = regs->regs[reg];
1944 	StoreW(addr, value, res);
1945 	if (res)
1946 		goto fault;
1947 	goto success;
1948 
1949 storeDW:
1950 #ifdef CONFIG_64BIT
1951 	/*
1952 	 * A 32-bit kernel might be running on a 64-bit processor.  But
1953 	 * if we're on a 32-bit processor and an i-cache incoherency
1954 	 * or race makes us see a 64-bit instruction here the sdl/sdr
1955 	 * would blow up, so for now we don't handle unaligned 64-bit
1956 	 * instructions on 32-bit kernels.
1957 	 */
1958 	if (!access_ok(VERIFY_WRITE, addr, 8))
1959 		goto sigbus;
1960 
1961 	value = regs->regs[reg];
1962 	StoreDW(addr, value, res);
1963 	if (res)
1964 		goto fault;
1965 	goto success;
1966 #endif /* CONFIG_64BIT */
1967 
1968 	/* Cannot handle 64-bit instructions in 32-bit kernel */
1969 	goto sigill;
1970 
1971 success:
1972 	regs->cp0_epc = contpc;	/* advance or branch */
1973 
1974 #ifdef CONFIG_DEBUG_FS
1975 	unaligned_instructions++;
1976 #endif
1977 	return;
1978 
1979 fault:
1980 	/* roll back jump/branch */
1981 	regs->cp0_epc = origpc;
1982 	regs->regs[31] = orig31;
1983 	/* Did we have an exception handler installed? */
1984 	if (fixup_exception(regs))
1985 		return;
1986 
1987 	die_if_kernel("Unhandled kernel unaligned access", regs);
1988 	force_sig(SIGSEGV, current);
1989 
1990 	return;
1991 
1992 sigbus:
1993 	die_if_kernel("Unhandled kernel unaligned access", regs);
1994 	force_sig(SIGBUS, current);
1995 
1996 	return;
1997 
1998 sigill:
1999 	die_if_kernel
2000 	    ("Unhandled kernel unaligned access or invalid instruction", regs);
2001 	force_sig(SIGILL, current);
2002 }
2003 
2004 static void emulate_load_store_MIPS16e(struct pt_regs *regs, void __user * addr)
2005 {
2006 	unsigned long value;
2007 	unsigned int res;
2008 	int reg;
2009 	unsigned long orig31;
2010 	u16 __user *pc16;
2011 	unsigned long origpc;
2012 	union mips16e_instruction mips16inst, oldinst;
2013 	unsigned int opcode;
2014 	int extended = 0;
2015 
2016 	origpc = regs->cp0_epc;
2017 	orig31 = regs->regs[31];
2018 	pc16 = (unsigned short __user *)msk_isa16_mode(origpc);
2019 	/*
2020 	 * This load never faults.
2021 	 */
2022 	__get_user(mips16inst.full, pc16);
2023 	oldinst = mips16inst;
2024 
2025 	/* skip EXTEND instruction */
2026 	if (mips16inst.ri.opcode == MIPS16e_extend_op) {
2027 		extended = 1;
2028 		pc16++;
2029 		__get_user(mips16inst.full, pc16);
2030 	} else if (delay_slot(regs)) {
2031 		/*  skip jump instructions */
2032 		/*  JAL/JALX are 32 bits but have OPCODE in first short int */
2033 		if (mips16inst.ri.opcode == MIPS16e_jal_op)
2034 			pc16++;
2035 		pc16++;
2036 		if (get_user(mips16inst.full, pc16))
2037 			goto sigbus;
2038 	}
2039 
2040 	opcode = mips16inst.ri.opcode;
2041 	switch (opcode) {
2042 	case MIPS16e_i64_op:	/* I64 or RI64 instruction */
2043 		switch (mips16inst.i64.func) {	/* I64/RI64 func field check */
2044 		case MIPS16e_ldpc_func:
2045 		case MIPS16e_ldsp_func:
2046 			reg = reg16to32[mips16inst.ri64.ry];
2047 			goto loadDW;
2048 
2049 		case MIPS16e_sdsp_func:
2050 			reg = reg16to32[mips16inst.ri64.ry];
2051 			goto writeDW;
2052 
2053 		case MIPS16e_sdrasp_func:
2054 			reg = 29;	/* GPRSP */
2055 			goto writeDW;
2056 		}
2057 
2058 		goto sigbus;
2059 
2060 	case MIPS16e_swsp_op:
2061 		reg = reg16to32[mips16inst.ri.rx];
2062 		if (extended && cpu_has_mips16e2)
2063 			switch (mips16inst.ri.imm >> 5) {
2064 			case 0:		/* SWSP */
2065 			case 1:		/* SWGP */
2066 				break;
2067 			case 2:		/* SHGP */
2068 				opcode = MIPS16e_sh_op;
2069 				break;
2070 			default:
2071 				goto sigbus;
2072 			}
2073 		break;
2074 
2075 	case MIPS16e_lwpc_op:
2076 		reg = reg16to32[mips16inst.ri.rx];
2077 		break;
2078 
2079 	case MIPS16e_lwsp_op:
2080 		reg = reg16to32[mips16inst.ri.rx];
2081 		if (extended && cpu_has_mips16e2)
2082 			switch (mips16inst.ri.imm >> 5) {
2083 			case 0:		/* LWSP */
2084 			case 1:		/* LWGP */
2085 				break;
2086 			case 2:		/* LHGP */
2087 				opcode = MIPS16e_lh_op;
2088 				break;
2089 			case 4:		/* LHUGP */
2090 				opcode = MIPS16e_lhu_op;
2091 				break;
2092 			default:
2093 				goto sigbus;
2094 			}
2095 		break;
2096 
2097 	case MIPS16e_i8_op:
2098 		if (mips16inst.i8.func != MIPS16e_swrasp_func)
2099 			goto sigbus;
2100 		reg = 29;	/* GPRSP */
2101 		break;
2102 
2103 	default:
2104 		reg = reg16to32[mips16inst.rri.ry];
2105 		break;
2106 	}
2107 
2108 	switch (opcode) {
2109 
2110 	case MIPS16e_lb_op:
2111 	case MIPS16e_lbu_op:
2112 	case MIPS16e_sb_op:
2113 		goto sigbus;
2114 
2115 	case MIPS16e_lh_op:
2116 		if (!access_ok(VERIFY_READ, addr, 2))
2117 			goto sigbus;
2118 
2119 		LoadHW(addr, value, res);
2120 		if (res)
2121 			goto fault;
2122 		MIPS16e_compute_return_epc(regs, &oldinst);
2123 		regs->regs[reg] = value;
2124 		break;
2125 
2126 	case MIPS16e_lhu_op:
2127 		if (!access_ok(VERIFY_READ, addr, 2))
2128 			goto sigbus;
2129 
2130 		LoadHWU(addr, value, res);
2131 		if (res)
2132 			goto fault;
2133 		MIPS16e_compute_return_epc(regs, &oldinst);
2134 		regs->regs[reg] = value;
2135 		break;
2136 
2137 	case MIPS16e_lw_op:
2138 	case MIPS16e_lwpc_op:
2139 	case MIPS16e_lwsp_op:
2140 		if (!access_ok(VERIFY_READ, addr, 4))
2141 			goto sigbus;
2142 
2143 		LoadW(addr, value, res);
2144 		if (res)
2145 			goto fault;
2146 		MIPS16e_compute_return_epc(regs, &oldinst);
2147 		regs->regs[reg] = value;
2148 		break;
2149 
2150 	case MIPS16e_lwu_op:
2151 #ifdef CONFIG_64BIT
2152 		/*
2153 		 * A 32-bit kernel might be running on a 64-bit processor.  But
2154 		 * if we're on a 32-bit processor and an i-cache incoherency
2155 		 * or race makes us see a 64-bit instruction here the sdl/sdr
2156 		 * would blow up, so for now we don't handle unaligned 64-bit
2157 		 * instructions on 32-bit kernels.
2158 		 */
2159 		if (!access_ok(VERIFY_READ, addr, 4))
2160 			goto sigbus;
2161 
2162 		LoadWU(addr, value, res);
2163 		if (res)
2164 			goto fault;
2165 		MIPS16e_compute_return_epc(regs, &oldinst);
2166 		regs->regs[reg] = value;
2167 		break;
2168 #endif /* CONFIG_64BIT */
2169 
2170 		/* Cannot handle 64-bit instructions in 32-bit kernel */
2171 		goto sigill;
2172 
2173 	case MIPS16e_ld_op:
2174 loadDW:
2175 #ifdef CONFIG_64BIT
2176 		/*
2177 		 * A 32-bit kernel might be running on a 64-bit processor.  But
2178 		 * if we're on a 32-bit processor and an i-cache incoherency
2179 		 * or race makes us see a 64-bit instruction here the sdl/sdr
2180 		 * would blow up, so for now we don't handle unaligned 64-bit
2181 		 * instructions on 32-bit kernels.
2182 		 */
2183 		if (!access_ok(VERIFY_READ, addr, 8))
2184 			goto sigbus;
2185 
2186 		LoadDW(addr, value, res);
2187 		if (res)
2188 			goto fault;
2189 		MIPS16e_compute_return_epc(regs, &oldinst);
2190 		regs->regs[reg] = value;
2191 		break;
2192 #endif /* CONFIG_64BIT */
2193 
2194 		/* Cannot handle 64-bit instructions in 32-bit kernel */
2195 		goto sigill;
2196 
2197 	case MIPS16e_sh_op:
2198 		if (!access_ok(VERIFY_WRITE, addr, 2))
2199 			goto sigbus;
2200 
2201 		MIPS16e_compute_return_epc(regs, &oldinst);
2202 		value = regs->regs[reg];
2203 		StoreHW(addr, value, res);
2204 		if (res)
2205 			goto fault;
2206 		break;
2207 
2208 	case MIPS16e_sw_op:
2209 	case MIPS16e_swsp_op:
2210 	case MIPS16e_i8_op:	/* actually - MIPS16e_swrasp_func */
2211 		if (!access_ok(VERIFY_WRITE, addr, 4))
2212 			goto sigbus;
2213 
2214 		MIPS16e_compute_return_epc(regs, &oldinst);
2215 		value = regs->regs[reg];
2216 		StoreW(addr, value, res);
2217 		if (res)
2218 			goto fault;
2219 		break;
2220 
2221 	case MIPS16e_sd_op:
2222 writeDW:
2223 #ifdef CONFIG_64BIT
2224 		/*
2225 		 * A 32-bit kernel might be running on a 64-bit processor.  But
2226 		 * if we're on a 32-bit processor and an i-cache incoherency
2227 		 * or race makes us see a 64-bit instruction here the sdl/sdr
2228 		 * would blow up, so for now we don't handle unaligned 64-bit
2229 		 * instructions on 32-bit kernels.
2230 		 */
2231 		if (!access_ok(VERIFY_WRITE, addr, 8))
2232 			goto sigbus;
2233 
2234 		MIPS16e_compute_return_epc(regs, &oldinst);
2235 		value = regs->regs[reg];
2236 		StoreDW(addr, value, res);
2237 		if (res)
2238 			goto fault;
2239 		break;
2240 #endif /* CONFIG_64BIT */
2241 
2242 		/* Cannot handle 64-bit instructions in 32-bit kernel */
2243 		goto sigill;
2244 
2245 	default:
2246 		/*
2247 		 * Pheeee...  We encountered an yet unknown instruction or
2248 		 * cache coherence problem.  Die sucker, die ...
2249 		 */
2250 		goto sigill;
2251 	}
2252 
2253 #ifdef CONFIG_DEBUG_FS
2254 	unaligned_instructions++;
2255 #endif
2256 
2257 	return;
2258 
2259 fault:
2260 	/* roll back jump/branch */
2261 	regs->cp0_epc = origpc;
2262 	regs->regs[31] = orig31;
2263 	/* Did we have an exception handler installed? */
2264 	if (fixup_exception(regs))
2265 		return;
2266 
2267 	die_if_kernel("Unhandled kernel unaligned access", regs);
2268 	force_sig(SIGSEGV, current);
2269 
2270 	return;
2271 
2272 sigbus:
2273 	die_if_kernel("Unhandled kernel unaligned access", regs);
2274 	force_sig(SIGBUS, current);
2275 
2276 	return;
2277 
2278 sigill:
2279 	die_if_kernel
2280 	    ("Unhandled kernel unaligned access or invalid instruction", regs);
2281 	force_sig(SIGILL, current);
2282 }
2283 
2284 asmlinkage void do_ade(struct pt_regs *regs)
2285 {
2286 	enum ctx_state prev_state;
2287 	unsigned int __user *pc;
2288 	mm_segment_t seg;
2289 
2290 	prev_state = exception_enter();
2291 	perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS,
2292 			1, regs, regs->cp0_badvaddr);
2293 	/*
2294 	 * Did we catch a fault trying to load an instruction?
2295 	 */
2296 	if (regs->cp0_badvaddr == regs->cp0_epc)
2297 		goto sigbus;
2298 
2299 	if (user_mode(regs) && !test_thread_flag(TIF_FIXADE))
2300 		goto sigbus;
2301 	if (unaligned_action == UNALIGNED_ACTION_SIGNAL)
2302 		goto sigbus;
2303 
2304 	/*
2305 	 * Do branch emulation only if we didn't forward the exception.
2306 	 * This is all so but ugly ...
2307 	 */
2308 
2309 	/*
2310 	 * Are we running in microMIPS mode?
2311 	 */
2312 	if (get_isa16_mode(regs->cp0_epc)) {
2313 		/*
2314 		 * Did we catch a fault trying to load an instruction in
2315 		 * 16-bit mode?
2316 		 */
2317 		if (regs->cp0_badvaddr == msk_isa16_mode(regs->cp0_epc))
2318 			goto sigbus;
2319 		if (unaligned_action == UNALIGNED_ACTION_SHOW)
2320 			show_registers(regs);
2321 
2322 		if (cpu_has_mmips) {
2323 			seg = get_fs();
2324 			if (!user_mode(regs))
2325 				set_fs(KERNEL_DS);
2326 			emulate_load_store_microMIPS(regs,
2327 				(void __user *)regs->cp0_badvaddr);
2328 			set_fs(seg);
2329 
2330 			return;
2331 		}
2332 
2333 		if (cpu_has_mips16) {
2334 			seg = get_fs();
2335 			if (!user_mode(regs))
2336 				set_fs(KERNEL_DS);
2337 			emulate_load_store_MIPS16e(regs,
2338 				(void __user *)regs->cp0_badvaddr);
2339 			set_fs(seg);
2340 
2341 			return;
2342 	}
2343 
2344 		goto sigbus;
2345 	}
2346 
2347 	if (unaligned_action == UNALIGNED_ACTION_SHOW)
2348 		show_registers(regs);
2349 	pc = (unsigned int __user *)exception_epc(regs);
2350 
2351 	seg = get_fs();
2352 	if (!user_mode(regs))
2353 		set_fs(KERNEL_DS);
2354 	emulate_load_store_insn(regs, (void __user *)regs->cp0_badvaddr, pc);
2355 	set_fs(seg);
2356 
2357 	return;
2358 
2359 sigbus:
2360 	die_if_kernel("Kernel unaligned instruction access", regs);
2361 	force_sig(SIGBUS, current);
2362 
2363 	/*
2364 	 * XXX On return from the signal handler we should advance the epc
2365 	 */
2366 	exception_exit(prev_state);
2367 }
2368 
2369 #ifdef CONFIG_DEBUG_FS
2370 static int __init debugfs_unaligned(void)
2371 {
2372 	struct dentry *d;
2373 
2374 	if (!mips_debugfs_dir)
2375 		return -ENODEV;
2376 	d = debugfs_create_u32("unaligned_instructions", S_IRUGO,
2377 			       mips_debugfs_dir, &unaligned_instructions);
2378 	if (!d)
2379 		return -ENOMEM;
2380 	d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR,
2381 			       mips_debugfs_dir, &unaligned_action);
2382 	if (!d)
2383 		return -ENOMEM;
2384 	return 0;
2385 }
2386 arch_initcall(debugfs_unaligned);
2387 #endif
2388