xref: /openbmc/linux/arch/mips/kernel/unaligned.c (revision 7587eb18)
1 /*
2  * Handle unaligned accesses by emulation.
3  *
4  * This file is subject to the terms and conditions of the GNU General Public
5  * License.  See the file "COPYING" in the main directory of this archive
6  * for more details.
7  *
8  * Copyright (C) 1996, 1998, 1999, 2002 by Ralf Baechle
9  * Copyright (C) 1999 Silicon Graphics, Inc.
10  * Copyright (C) 2014 Imagination Technologies Ltd.
11  *
12  * This file contains exception handler for address error exception with the
13  * special capability to execute faulting instructions in software.  The
14  * handler does not try to handle the case when the program counter points
15  * to an address not aligned to a word boundary.
16  *
17  * Putting data to unaligned addresses is a bad practice even on Intel where
18  * only the performance is affected.  Much worse is that such code is non-
19  * portable.  Due to several programs that die on MIPS due to alignment
20  * problems I decided to implement this handler anyway though I originally
21  * didn't intend to do this at all for user code.
22  *
23  * For now I enable fixing of address errors by default to make life easier.
24  * I however intend to disable this somewhen in the future when the alignment
25  * problems with user programs have been fixed.	 For programmers this is the
26  * right way to go.
27  *
28  * Fixing address errors is a per process option.  The option is inherited
29  * across fork(2) and execve(2) calls.	If you really want to use the
30  * option in your user programs - I discourage the use of the software
31  * emulation strongly - use the following code in your userland stuff:
32  *
33  * #include <sys/sysmips.h>
34  *
35  * ...
36  * sysmips(MIPS_FIXADE, x);
37  * ...
38  *
39  * The argument x is 0 for disabling software emulation, enabled otherwise.
40  *
41  * Below a little program to play around with this feature.
42  *
43  * #include <stdio.h>
44  * #include <sys/sysmips.h>
45  *
46  * struct foo {
47  *	   unsigned char bar[8];
48  * };
49  *
50  * main(int argc, char *argv[])
51  * {
52  *	   struct foo x = {0, 1, 2, 3, 4, 5, 6, 7};
53  *	   unsigned int *p = (unsigned int *) (x.bar + 3);
54  *	   int i;
55  *
56  *	   if (argc > 1)
57  *		   sysmips(MIPS_FIXADE, atoi(argv[1]));
58  *
59  *	   printf("*p = %08lx\n", *p);
60  *
61  *	   *p = 0xdeadface;
62  *
63  *	   for(i = 0; i <= 7; i++)
64  *	   printf("%02x ", x.bar[i]);
65  *	   printf("\n");
66  * }
67  *
68  * Coprocessor loads are not supported; I think this case is unimportant
69  * in the practice.
70  *
71  * TODO: Handle ndc (attempted store to doubleword in uncached memory)
72  *	 exception for the R6000.
73  *	 A store crossing a page boundary might be executed only partially.
74  *	 Undo the partial store in this case.
75  */
76 #include <linux/context_tracking.h>
77 #include <linux/mm.h>
78 #include <linux/signal.h>
79 #include <linux/smp.h>
80 #include <linux/sched.h>
81 #include <linux/debugfs.h>
82 #include <linux/perf_event.h>
83 
84 #include <asm/asm.h>
85 #include <asm/branch.h>
86 #include <asm/byteorder.h>
87 #include <asm/cop2.h>
88 #include <asm/debug.h>
89 #include <asm/fpu.h>
90 #include <asm/fpu_emulator.h>
91 #include <asm/inst.h>
92 #include <asm/uaccess.h>
93 
94 #define STR(x)	__STR(x)
95 #define __STR(x)  #x
96 
97 enum {
98 	UNALIGNED_ACTION_QUIET,
99 	UNALIGNED_ACTION_SIGNAL,
100 	UNALIGNED_ACTION_SHOW,
101 };
102 #ifdef CONFIG_DEBUG_FS
103 static u32 unaligned_instructions;
104 static u32 unaligned_action;
105 #else
106 #define unaligned_action UNALIGNED_ACTION_QUIET
107 #endif
108 extern void show_registers(struct pt_regs *regs);
109 
110 #ifdef __BIG_ENDIAN
111 #define     _LoadHW(addr, value, res, type)  \
112 do {                                                        \
113 		__asm__ __volatile__ (".set\tnoat\n"        \
114 			"1:\t"type##_lb("%0", "0(%2)")"\n"  \
115 			"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
116 			"sll\t%0, 0x8\n\t"                  \
117 			"or\t%0, $1\n\t"                    \
118 			"li\t%1, 0\n"                       \
119 			"3:\t.set\tat\n\t"                  \
120 			".insn\n\t"                         \
121 			".section\t.fixup,\"ax\"\n\t"       \
122 			"4:\tli\t%1, %3\n\t"                \
123 			"j\t3b\n\t"                         \
124 			".previous\n\t"                     \
125 			".section\t__ex_table,\"a\"\n\t"    \
126 			STR(PTR)"\t1b, 4b\n\t"              \
127 			STR(PTR)"\t2b, 4b\n\t"              \
128 			".previous"                         \
129 			: "=&r" (value), "=r" (res)         \
130 			: "r" (addr), "i" (-EFAULT));       \
131 } while(0)
132 
133 #ifndef CONFIG_CPU_MIPSR6
134 #define     _LoadW(addr, value, res, type)   \
135 do {                                                        \
136 		__asm__ __volatile__ (                      \
137 			"1:\t"type##_lwl("%0", "(%2)")"\n"   \
138 			"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
139 			"li\t%1, 0\n"                       \
140 			"3:\n\t"                            \
141 			".insn\n\t"                         \
142 			".section\t.fixup,\"ax\"\n\t"       \
143 			"4:\tli\t%1, %3\n\t"                \
144 			"j\t3b\n\t"                         \
145 			".previous\n\t"                     \
146 			".section\t__ex_table,\"a\"\n\t"    \
147 			STR(PTR)"\t1b, 4b\n\t"              \
148 			STR(PTR)"\t2b, 4b\n\t"              \
149 			".previous"                         \
150 			: "=&r" (value), "=r" (res)         \
151 			: "r" (addr), "i" (-EFAULT));       \
152 } while(0)
153 
154 #else
155 /* MIPSR6 has no lwl instruction */
156 #define     _LoadW(addr, value, res, type) \
157 do {                                                        \
158 		__asm__ __volatile__ (			    \
159 			".set\tpush\n"			    \
160 			".set\tnoat\n\t"		    \
161 			"1:"type##_lb("%0", "0(%2)")"\n\t"  \
162 			"2:"type##_lbu("$1", "1(%2)")"\n\t" \
163 			"sll\t%0, 0x8\n\t"		    \
164 			"or\t%0, $1\n\t"		    \
165 			"3:"type##_lbu("$1", "2(%2)")"\n\t" \
166 			"sll\t%0, 0x8\n\t"		    \
167 			"or\t%0, $1\n\t"		    \
168 			"4:"type##_lbu("$1", "3(%2)")"\n\t" \
169 			"sll\t%0, 0x8\n\t"		    \
170 			"or\t%0, $1\n\t"		    \
171 			"li\t%1, 0\n"			    \
172 			".set\tpop\n"			    \
173 			"10:\n\t"			    \
174 			".insn\n\t"			    \
175 			".section\t.fixup,\"ax\"\n\t"	    \
176 			"11:\tli\t%1, %3\n\t"		    \
177 			"j\t10b\n\t"			    \
178 			".previous\n\t"			    \
179 			".section\t__ex_table,\"a\"\n\t"    \
180 			STR(PTR)"\t1b, 11b\n\t"		    \
181 			STR(PTR)"\t2b, 11b\n\t"		    \
182 			STR(PTR)"\t3b, 11b\n\t"		    \
183 			STR(PTR)"\t4b, 11b\n\t"		    \
184 			".previous"			    \
185 			: "=&r" (value), "=r" (res)	    \
186 			: "r" (addr), "i" (-EFAULT));       \
187 } while(0)
188 
189 #endif /* CONFIG_CPU_MIPSR6 */
190 
191 #define     _LoadHWU(addr, value, res, type) \
192 do {                                                        \
193 		__asm__ __volatile__ (                      \
194 			".set\tnoat\n"                      \
195 			"1:\t"type##_lbu("%0", "0(%2)")"\n" \
196 			"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
197 			"sll\t%0, 0x8\n\t"                  \
198 			"or\t%0, $1\n\t"                    \
199 			"li\t%1, 0\n"                       \
200 			"3:\n\t"                            \
201 			".insn\n\t"                         \
202 			".set\tat\n\t"                      \
203 			".section\t.fixup,\"ax\"\n\t"       \
204 			"4:\tli\t%1, %3\n\t"                \
205 			"j\t3b\n\t"                         \
206 			".previous\n\t"                     \
207 			".section\t__ex_table,\"a\"\n\t"    \
208 			STR(PTR)"\t1b, 4b\n\t"              \
209 			STR(PTR)"\t2b, 4b\n\t"              \
210 			".previous"                         \
211 			: "=&r" (value), "=r" (res)         \
212 			: "r" (addr), "i" (-EFAULT));       \
213 } while(0)
214 
215 #ifndef CONFIG_CPU_MIPSR6
216 #define     _LoadWU(addr, value, res, type)  \
217 do {                                                        \
218 		__asm__ __volatile__ (                      \
219 			"1:\t"type##_lwl("%0", "(%2)")"\n"  \
220 			"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
221 			"dsll\t%0, %0, 32\n\t"              \
222 			"dsrl\t%0, %0, 32\n\t"              \
223 			"li\t%1, 0\n"                       \
224 			"3:\n\t"                            \
225 			".insn\n\t"                         \
226 			"\t.section\t.fixup,\"ax\"\n\t"     \
227 			"4:\tli\t%1, %3\n\t"                \
228 			"j\t3b\n\t"                         \
229 			".previous\n\t"                     \
230 			".section\t__ex_table,\"a\"\n\t"    \
231 			STR(PTR)"\t1b, 4b\n\t"              \
232 			STR(PTR)"\t2b, 4b\n\t"              \
233 			".previous"                         \
234 			: "=&r" (value), "=r" (res)         \
235 			: "r" (addr), "i" (-EFAULT));       \
236 } while(0)
237 
238 #define     _LoadDW(addr, value, res)  \
239 do {                                                        \
240 		__asm__ __volatile__ (                      \
241 			"1:\tldl\t%0, (%2)\n"               \
242 			"2:\tldr\t%0, 7(%2)\n\t"            \
243 			"li\t%1, 0\n"                       \
244 			"3:\n\t"                            \
245 			".insn\n\t"                         \
246 			"\t.section\t.fixup,\"ax\"\n\t"     \
247 			"4:\tli\t%1, %3\n\t"                \
248 			"j\t3b\n\t"                         \
249 			".previous\n\t"                     \
250 			".section\t__ex_table,\"a\"\n\t"    \
251 			STR(PTR)"\t1b, 4b\n\t"              \
252 			STR(PTR)"\t2b, 4b\n\t"              \
253 			".previous"                         \
254 			: "=&r" (value), "=r" (res)         \
255 			: "r" (addr), "i" (-EFAULT));       \
256 } while(0)
257 
258 #else
259 /* MIPSR6 has not lwl and ldl instructions */
260 #define	    _LoadWU(addr, value, res, type) \
261 do {                                                        \
262 		__asm__ __volatile__ (			    \
263 			".set\tpush\n\t"		    \
264 			".set\tnoat\n\t"		    \
265 			"1:"type##_lbu("%0", "0(%2)")"\n\t" \
266 			"2:"type##_lbu("$1", "1(%2)")"\n\t" \
267 			"sll\t%0, 0x8\n\t"		    \
268 			"or\t%0, $1\n\t"		    \
269 			"3:"type##_lbu("$1", "2(%2)")"\n\t" \
270 			"sll\t%0, 0x8\n\t"		    \
271 			"or\t%0, $1\n\t"		    \
272 			"4:"type##_lbu("$1", "3(%2)")"\n\t" \
273 			"sll\t%0, 0x8\n\t"		    \
274 			"or\t%0, $1\n\t"		    \
275 			"li\t%1, 0\n"			    \
276 			".set\tpop\n"			    \
277 			"10:\n\t"			    \
278 			".insn\n\t"			    \
279 			".section\t.fixup,\"ax\"\n\t"	    \
280 			"11:\tli\t%1, %3\n\t"		    \
281 			"j\t10b\n\t"			    \
282 			".previous\n\t"			    \
283 			".section\t__ex_table,\"a\"\n\t"    \
284 			STR(PTR)"\t1b, 11b\n\t"		    \
285 			STR(PTR)"\t2b, 11b\n\t"		    \
286 			STR(PTR)"\t3b, 11b\n\t"		    \
287 			STR(PTR)"\t4b, 11b\n\t"		    \
288 			".previous"			    \
289 			: "=&r" (value), "=r" (res)	    \
290 			: "r" (addr), "i" (-EFAULT));       \
291 } while(0)
292 
293 #define     _LoadDW(addr, value, res)  \
294 do {                                                        \
295 		__asm__ __volatile__ (			    \
296 			".set\tpush\n\t"		    \
297 			".set\tnoat\n\t"		    \
298 			"1:lb\t%0, 0(%2)\n\t"    	    \
299 			"2:lbu\t $1, 1(%2)\n\t"   	    \
300 			"dsll\t%0, 0x8\n\t"		    \
301 			"or\t%0, $1\n\t"		    \
302 			"3:lbu\t$1, 2(%2)\n\t"   	    \
303 			"dsll\t%0, 0x8\n\t"		    \
304 			"or\t%0, $1\n\t"		    \
305 			"4:lbu\t$1, 3(%2)\n\t"   	    \
306 			"dsll\t%0, 0x8\n\t"		    \
307 			"or\t%0, $1\n\t"		    \
308 			"5:lbu\t$1, 4(%2)\n\t"   	    \
309 			"dsll\t%0, 0x8\n\t"		    \
310 			"or\t%0, $1\n\t"		    \
311 			"6:lbu\t$1, 5(%2)\n\t"   	    \
312 			"dsll\t%0, 0x8\n\t"		    \
313 			"or\t%0, $1\n\t"		    \
314 			"7:lbu\t$1, 6(%2)\n\t"   	    \
315 			"dsll\t%0, 0x8\n\t"		    \
316 			"or\t%0, $1\n\t"		    \
317 			"8:lbu\t$1, 7(%2)\n\t"   	    \
318 			"dsll\t%0, 0x8\n\t"		    \
319 			"or\t%0, $1\n\t"		    \
320 			"li\t%1, 0\n"			    \
321 			".set\tpop\n\t"			    \
322 			"10:\n\t"			    \
323 			".insn\n\t"			    \
324 			".section\t.fixup,\"ax\"\n\t"	    \
325 			"11:\tli\t%1, %3\n\t"		    \
326 			"j\t10b\n\t"			    \
327 			".previous\n\t"			    \
328 			".section\t__ex_table,\"a\"\n\t"    \
329 			STR(PTR)"\t1b, 11b\n\t"		    \
330 			STR(PTR)"\t2b, 11b\n\t"		    \
331 			STR(PTR)"\t3b, 11b\n\t"		    \
332 			STR(PTR)"\t4b, 11b\n\t"		    \
333 			STR(PTR)"\t5b, 11b\n\t"		    \
334 			STR(PTR)"\t6b, 11b\n\t"		    \
335 			STR(PTR)"\t7b, 11b\n\t"		    \
336 			STR(PTR)"\t8b, 11b\n\t"		    \
337 			".previous"			    \
338 			: "=&r" (value), "=r" (res)	    \
339 			: "r" (addr), "i" (-EFAULT));       \
340 } while(0)
341 
342 #endif /* CONFIG_CPU_MIPSR6 */
343 
344 
345 #define     _StoreHW(addr, value, res, type) \
346 do {                                                        \
347 		__asm__ __volatile__ (                      \
348 			".set\tnoat\n"                      \
349 			"1:\t"type##_sb("%1", "1(%2)")"\n"  \
350 			"srl\t$1, %1, 0x8\n"                \
351 			"2:\t"type##_sb("$1", "0(%2)")"\n"  \
352 			".set\tat\n\t"                      \
353 			"li\t%0, 0\n"                       \
354 			"3:\n\t"                            \
355 			".insn\n\t"                         \
356 			".section\t.fixup,\"ax\"\n\t"       \
357 			"4:\tli\t%0, %3\n\t"                \
358 			"j\t3b\n\t"                         \
359 			".previous\n\t"                     \
360 			".section\t__ex_table,\"a\"\n\t"    \
361 			STR(PTR)"\t1b, 4b\n\t"              \
362 			STR(PTR)"\t2b, 4b\n\t"              \
363 			".previous"                         \
364 			: "=r" (res)                        \
365 			: "r" (value), "r" (addr), "i" (-EFAULT));\
366 } while(0)
367 
368 #ifndef CONFIG_CPU_MIPSR6
369 #define     _StoreW(addr, value, res, type)  \
370 do {                                                        \
371 		__asm__ __volatile__ (                      \
372 			"1:\t"type##_swl("%1", "(%2)")"\n"  \
373 			"2:\t"type##_swr("%1", "3(%2)")"\n\t"\
374 			"li\t%0, 0\n"                       \
375 			"3:\n\t"                            \
376 			".insn\n\t"                         \
377 			".section\t.fixup,\"ax\"\n\t"       \
378 			"4:\tli\t%0, %3\n\t"                \
379 			"j\t3b\n\t"                         \
380 			".previous\n\t"                     \
381 			".section\t__ex_table,\"a\"\n\t"    \
382 			STR(PTR)"\t1b, 4b\n\t"              \
383 			STR(PTR)"\t2b, 4b\n\t"              \
384 			".previous"                         \
385 		: "=r" (res)                                \
386 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
387 } while(0)
388 
389 #define     _StoreDW(addr, value, res) \
390 do {                                                        \
391 		__asm__ __volatile__ (                      \
392 			"1:\tsdl\t%1,(%2)\n"                \
393 			"2:\tsdr\t%1, 7(%2)\n\t"            \
394 			"li\t%0, 0\n"                       \
395 			"3:\n\t"                            \
396 			".insn\n\t"                         \
397 			".section\t.fixup,\"ax\"\n\t"       \
398 			"4:\tli\t%0, %3\n\t"                \
399 			"j\t3b\n\t"                         \
400 			".previous\n\t"                     \
401 			".section\t__ex_table,\"a\"\n\t"    \
402 			STR(PTR)"\t1b, 4b\n\t"              \
403 			STR(PTR)"\t2b, 4b\n\t"              \
404 			".previous"                         \
405 		: "=r" (res)                                \
406 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
407 } while(0)
408 
409 #else
410 /* MIPSR6 has no swl and sdl instructions */
411 #define     _StoreW(addr, value, res, type)  \
412 do {                                                        \
413 		__asm__ __volatile__ (                      \
414 			".set\tpush\n\t"		    \
415 			".set\tnoat\n\t"		    \
416 			"1:"type##_sb("%1", "3(%2)")"\n\t"  \
417 			"srl\t$1, %1, 0x8\n\t"		    \
418 			"2:"type##_sb("$1", "2(%2)")"\n\t"  \
419 			"srl\t$1, $1,  0x8\n\t"		    \
420 			"3:"type##_sb("$1", "1(%2)")"\n\t"  \
421 			"srl\t$1, $1, 0x8\n\t"		    \
422 			"4:"type##_sb("$1", "0(%2)")"\n\t"  \
423 			".set\tpop\n\t"			    \
424 			"li\t%0, 0\n"			    \
425 			"10:\n\t"			    \
426 			".insn\n\t"			    \
427 			".section\t.fixup,\"ax\"\n\t"	    \
428 			"11:\tli\t%0, %3\n\t"		    \
429 			"j\t10b\n\t"			    \
430 			".previous\n\t"			    \
431 			".section\t__ex_table,\"a\"\n\t"    \
432 			STR(PTR)"\t1b, 11b\n\t"		    \
433 			STR(PTR)"\t2b, 11b\n\t"		    \
434 			STR(PTR)"\t3b, 11b\n\t"		    \
435 			STR(PTR)"\t4b, 11b\n\t"		    \
436 			".previous"			    \
437 		: "=&r" (res)			    	    \
438 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
439 		: "memory");                                \
440 } while(0)
441 
442 #define     _StoreDW(addr, value, res) \
443 do {                                                        \
444 		__asm__ __volatile__ (                      \
445 			".set\tpush\n\t"		    \
446 			".set\tnoat\n\t"		    \
447 			"1:sb\t%1, 7(%2)\n\t"    	    \
448 			"dsrl\t$1, %1, 0x8\n\t"		    \
449 			"2:sb\t$1, 6(%2)\n\t"    	    \
450 			"dsrl\t$1, $1, 0x8\n\t"		    \
451 			"3:sb\t$1, 5(%2)\n\t"    	    \
452 			"dsrl\t$1, $1, 0x8\n\t"		    \
453 			"4:sb\t$1, 4(%2)\n\t"    	    \
454 			"dsrl\t$1, $1, 0x8\n\t"		    \
455 			"5:sb\t$1, 3(%2)\n\t"    	    \
456 			"dsrl\t$1, $1, 0x8\n\t"		    \
457 			"6:sb\t$1, 2(%2)\n\t"    	    \
458 			"dsrl\t$1, $1, 0x8\n\t"		    \
459 			"7:sb\t$1, 1(%2)\n\t"    	    \
460 			"dsrl\t$1, $1, 0x8\n\t"		    \
461 			"8:sb\t$1, 0(%2)\n\t"    	    \
462 			"dsrl\t$1, $1, 0x8\n\t"		    \
463 			".set\tpop\n\t"			    \
464 			"li\t%0, 0\n"			    \
465 			"10:\n\t"			    \
466 			".insn\n\t"			    \
467 			".section\t.fixup,\"ax\"\n\t"	    \
468 			"11:\tli\t%0, %3\n\t"		    \
469 			"j\t10b\n\t"			    \
470 			".previous\n\t"			    \
471 			".section\t__ex_table,\"a\"\n\t"    \
472 			STR(PTR)"\t1b, 11b\n\t"		    \
473 			STR(PTR)"\t2b, 11b\n\t"		    \
474 			STR(PTR)"\t3b, 11b\n\t"		    \
475 			STR(PTR)"\t4b, 11b\n\t"		    \
476 			STR(PTR)"\t5b, 11b\n\t"		    \
477 			STR(PTR)"\t6b, 11b\n\t"		    \
478 			STR(PTR)"\t7b, 11b\n\t"		    \
479 			STR(PTR)"\t8b, 11b\n\t"		    \
480 			".previous"			    \
481 		: "=&r" (res)			    	    \
482 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
483 		: "memory");                                \
484 } while(0)
485 
486 #endif /* CONFIG_CPU_MIPSR6 */
487 
488 #else /* __BIG_ENDIAN */
489 
490 #define     _LoadHW(addr, value, res, type)  \
491 do {                                                        \
492 		__asm__ __volatile__ (".set\tnoat\n"        \
493 			"1:\t"type##_lb("%0", "1(%2)")"\n"  \
494 			"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
495 			"sll\t%0, 0x8\n\t"                  \
496 			"or\t%0, $1\n\t"                    \
497 			"li\t%1, 0\n"                       \
498 			"3:\t.set\tat\n\t"                  \
499 			".insn\n\t"                         \
500 			".section\t.fixup,\"ax\"\n\t"       \
501 			"4:\tli\t%1, %3\n\t"                \
502 			"j\t3b\n\t"                         \
503 			".previous\n\t"                     \
504 			".section\t__ex_table,\"a\"\n\t"    \
505 			STR(PTR)"\t1b, 4b\n\t"              \
506 			STR(PTR)"\t2b, 4b\n\t"              \
507 			".previous"                         \
508 			: "=&r" (value), "=r" (res)         \
509 			: "r" (addr), "i" (-EFAULT));       \
510 } while(0)
511 
512 #ifndef CONFIG_CPU_MIPSR6
513 #define     _LoadW(addr, value, res, type)   \
514 do {                                                        \
515 		__asm__ __volatile__ (                      \
516 			"1:\t"type##_lwl("%0", "3(%2)")"\n" \
517 			"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
518 			"li\t%1, 0\n"                       \
519 			"3:\n\t"                            \
520 			".insn\n\t"                         \
521 			".section\t.fixup,\"ax\"\n\t"       \
522 			"4:\tli\t%1, %3\n\t"                \
523 			"j\t3b\n\t"                         \
524 			".previous\n\t"                     \
525 			".section\t__ex_table,\"a\"\n\t"    \
526 			STR(PTR)"\t1b, 4b\n\t"              \
527 			STR(PTR)"\t2b, 4b\n\t"              \
528 			".previous"                         \
529 			: "=&r" (value), "=r" (res)         \
530 			: "r" (addr), "i" (-EFAULT));       \
531 } while(0)
532 
533 #else
534 /* MIPSR6 has no lwl instruction */
535 #define     _LoadW(addr, value, res, type) \
536 do {                                                        \
537 		__asm__ __volatile__ (			    \
538 			".set\tpush\n"			    \
539 			".set\tnoat\n\t"		    \
540 			"1:"type##_lb("%0", "3(%2)")"\n\t"  \
541 			"2:"type##_lbu("$1", "2(%2)")"\n\t" \
542 			"sll\t%0, 0x8\n\t"		    \
543 			"or\t%0, $1\n\t"		    \
544 			"3:"type##_lbu("$1", "1(%2)")"\n\t" \
545 			"sll\t%0, 0x8\n\t"		    \
546 			"or\t%0, $1\n\t"		    \
547 			"4:"type##_lbu("$1", "0(%2)")"\n\t" \
548 			"sll\t%0, 0x8\n\t"		    \
549 			"or\t%0, $1\n\t"		    \
550 			"li\t%1, 0\n"			    \
551 			".set\tpop\n"			    \
552 			"10:\n\t"			    \
553 			".insn\n\t"			    \
554 			".section\t.fixup,\"ax\"\n\t"	    \
555 			"11:\tli\t%1, %3\n\t"		    \
556 			"j\t10b\n\t"			    \
557 			".previous\n\t"			    \
558 			".section\t__ex_table,\"a\"\n\t"    \
559 			STR(PTR)"\t1b, 11b\n\t"		    \
560 			STR(PTR)"\t2b, 11b\n\t"		    \
561 			STR(PTR)"\t3b, 11b\n\t"		    \
562 			STR(PTR)"\t4b, 11b\n\t"		    \
563 			".previous"			    \
564 			: "=&r" (value), "=r" (res)	    \
565 			: "r" (addr), "i" (-EFAULT));       \
566 } while(0)
567 
568 #endif /* CONFIG_CPU_MIPSR6 */
569 
570 
571 #define     _LoadHWU(addr, value, res, type) \
572 do {                                                        \
573 		__asm__ __volatile__ (                      \
574 			".set\tnoat\n"                      \
575 			"1:\t"type##_lbu("%0", "1(%2)")"\n" \
576 			"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
577 			"sll\t%0, 0x8\n\t"                  \
578 			"or\t%0, $1\n\t"                    \
579 			"li\t%1, 0\n"                       \
580 			"3:\n\t"                            \
581 			".insn\n\t"                         \
582 			".set\tat\n\t"                      \
583 			".section\t.fixup,\"ax\"\n\t"       \
584 			"4:\tli\t%1, %3\n\t"                \
585 			"j\t3b\n\t"                         \
586 			".previous\n\t"                     \
587 			".section\t__ex_table,\"a\"\n\t"    \
588 			STR(PTR)"\t1b, 4b\n\t"              \
589 			STR(PTR)"\t2b, 4b\n\t"              \
590 			".previous"                         \
591 			: "=&r" (value), "=r" (res)         \
592 			: "r" (addr), "i" (-EFAULT));       \
593 } while(0)
594 
595 #ifndef CONFIG_CPU_MIPSR6
596 #define     _LoadWU(addr, value, res, type)  \
597 do {                                                        \
598 		__asm__ __volatile__ (                      \
599 			"1:\t"type##_lwl("%0", "3(%2)")"\n" \
600 			"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
601 			"dsll\t%0, %0, 32\n\t"              \
602 			"dsrl\t%0, %0, 32\n\t"              \
603 			"li\t%1, 0\n"                       \
604 			"3:\n\t"                            \
605 			".insn\n\t"                         \
606 			"\t.section\t.fixup,\"ax\"\n\t"     \
607 			"4:\tli\t%1, %3\n\t"                \
608 			"j\t3b\n\t"                         \
609 			".previous\n\t"                     \
610 			".section\t__ex_table,\"a\"\n\t"    \
611 			STR(PTR)"\t1b, 4b\n\t"              \
612 			STR(PTR)"\t2b, 4b\n\t"              \
613 			".previous"                         \
614 			: "=&r" (value), "=r" (res)         \
615 			: "r" (addr), "i" (-EFAULT));       \
616 } while(0)
617 
618 #define     _LoadDW(addr, value, res)  \
619 do {                                                        \
620 		__asm__ __volatile__ (                      \
621 			"1:\tldl\t%0, 7(%2)\n"              \
622 			"2:\tldr\t%0, (%2)\n\t"             \
623 			"li\t%1, 0\n"                       \
624 			"3:\n\t"                            \
625 			".insn\n\t"                         \
626 			"\t.section\t.fixup,\"ax\"\n\t"     \
627 			"4:\tli\t%1, %3\n\t"                \
628 			"j\t3b\n\t"                         \
629 			".previous\n\t"                     \
630 			".section\t__ex_table,\"a\"\n\t"    \
631 			STR(PTR)"\t1b, 4b\n\t"              \
632 			STR(PTR)"\t2b, 4b\n\t"              \
633 			".previous"                         \
634 			: "=&r" (value), "=r" (res)         \
635 			: "r" (addr), "i" (-EFAULT));       \
636 } while(0)
637 
638 #else
639 /* MIPSR6 has not lwl and ldl instructions */
640 #define	    _LoadWU(addr, value, res, type) \
641 do {                                                        \
642 		__asm__ __volatile__ (			    \
643 			".set\tpush\n\t"		    \
644 			".set\tnoat\n\t"		    \
645 			"1:"type##_lbu("%0", "3(%2)")"\n\t" \
646 			"2:"type##_lbu("$1", "2(%2)")"\n\t" \
647 			"sll\t%0, 0x8\n\t"		    \
648 			"or\t%0, $1\n\t"		    \
649 			"3:"type##_lbu("$1", "1(%2)")"\n\t" \
650 			"sll\t%0, 0x8\n\t"		    \
651 			"or\t%0, $1\n\t"		    \
652 			"4:"type##_lbu("$1", "0(%2)")"\n\t" \
653 			"sll\t%0, 0x8\n\t"		    \
654 			"or\t%0, $1\n\t"		    \
655 			"li\t%1, 0\n"			    \
656 			".set\tpop\n"			    \
657 			"10:\n\t"			    \
658 			".insn\n\t"			    \
659 			".section\t.fixup,\"ax\"\n\t"	    \
660 			"11:\tli\t%1, %3\n\t"		    \
661 			"j\t10b\n\t"			    \
662 			".previous\n\t"			    \
663 			".section\t__ex_table,\"a\"\n\t"    \
664 			STR(PTR)"\t1b, 11b\n\t"		    \
665 			STR(PTR)"\t2b, 11b\n\t"		    \
666 			STR(PTR)"\t3b, 11b\n\t"		    \
667 			STR(PTR)"\t4b, 11b\n\t"		    \
668 			".previous"			    \
669 			: "=&r" (value), "=r" (res)	    \
670 			: "r" (addr), "i" (-EFAULT));       \
671 } while(0)
672 
673 #define     _LoadDW(addr, value, res)  \
674 do {                                                        \
675 		__asm__ __volatile__ (			    \
676 			".set\tpush\n\t"		    \
677 			".set\tnoat\n\t"		    \
678 			"1:lb\t%0, 7(%2)\n\t"    	    \
679 			"2:lbu\t$1, 6(%2)\n\t"   	    \
680 			"dsll\t%0, 0x8\n\t"		    \
681 			"or\t%0, $1\n\t"		    \
682 			"3:lbu\t$1, 5(%2)\n\t"   	    \
683 			"dsll\t%0, 0x8\n\t"		    \
684 			"or\t%0, $1\n\t"		    \
685 			"4:lbu\t$1, 4(%2)\n\t"   	    \
686 			"dsll\t%0, 0x8\n\t"		    \
687 			"or\t%0, $1\n\t"		    \
688 			"5:lbu\t$1, 3(%2)\n\t"   	    \
689 			"dsll\t%0, 0x8\n\t"		    \
690 			"or\t%0, $1\n\t"		    \
691 			"6:lbu\t$1, 2(%2)\n\t"   	    \
692 			"dsll\t%0, 0x8\n\t"		    \
693 			"or\t%0, $1\n\t"		    \
694 			"7:lbu\t$1, 1(%2)\n\t"   	    \
695 			"dsll\t%0, 0x8\n\t"		    \
696 			"or\t%0, $1\n\t"		    \
697 			"8:lbu\t$1, 0(%2)\n\t"   	    \
698 			"dsll\t%0, 0x8\n\t"		    \
699 			"or\t%0, $1\n\t"		    \
700 			"li\t%1, 0\n"			    \
701 			".set\tpop\n\t"			    \
702 			"10:\n\t"			    \
703 			".insn\n\t"			    \
704 			".section\t.fixup,\"ax\"\n\t"	    \
705 			"11:\tli\t%1, %3\n\t"		    \
706 			"j\t10b\n\t"			    \
707 			".previous\n\t"			    \
708 			".section\t__ex_table,\"a\"\n\t"    \
709 			STR(PTR)"\t1b, 11b\n\t"		    \
710 			STR(PTR)"\t2b, 11b\n\t"		    \
711 			STR(PTR)"\t3b, 11b\n\t"		    \
712 			STR(PTR)"\t4b, 11b\n\t"		    \
713 			STR(PTR)"\t5b, 11b\n\t"		    \
714 			STR(PTR)"\t6b, 11b\n\t"		    \
715 			STR(PTR)"\t7b, 11b\n\t"		    \
716 			STR(PTR)"\t8b, 11b\n\t"		    \
717 			".previous"			    \
718 			: "=&r" (value), "=r" (res)	    \
719 			: "r" (addr), "i" (-EFAULT));       \
720 } while(0)
721 #endif /* CONFIG_CPU_MIPSR6 */
722 
723 #define     _StoreHW(addr, value, res, type) \
724 do {                                                        \
725 		__asm__ __volatile__ (                      \
726 			".set\tnoat\n"                      \
727 			"1:\t"type##_sb("%1", "0(%2)")"\n"  \
728 			"srl\t$1,%1, 0x8\n"                 \
729 			"2:\t"type##_sb("$1", "1(%2)")"\n"  \
730 			".set\tat\n\t"                      \
731 			"li\t%0, 0\n"                       \
732 			"3:\n\t"                            \
733 			".insn\n\t"                         \
734 			".section\t.fixup,\"ax\"\n\t"       \
735 			"4:\tli\t%0, %3\n\t"                \
736 			"j\t3b\n\t"                         \
737 			".previous\n\t"                     \
738 			".section\t__ex_table,\"a\"\n\t"    \
739 			STR(PTR)"\t1b, 4b\n\t"              \
740 			STR(PTR)"\t2b, 4b\n\t"              \
741 			".previous"                         \
742 			: "=r" (res)                        \
743 			: "r" (value), "r" (addr), "i" (-EFAULT));\
744 } while(0)
745 
746 #ifndef CONFIG_CPU_MIPSR6
747 #define     _StoreW(addr, value, res, type)  \
748 do {                                                        \
749 		__asm__ __volatile__ (                      \
750 			"1:\t"type##_swl("%1", "3(%2)")"\n" \
751 			"2:\t"type##_swr("%1", "(%2)")"\n\t"\
752 			"li\t%0, 0\n"                       \
753 			"3:\n\t"                            \
754 			".insn\n\t"                         \
755 			".section\t.fixup,\"ax\"\n\t"       \
756 			"4:\tli\t%0, %3\n\t"                \
757 			"j\t3b\n\t"                         \
758 			".previous\n\t"                     \
759 			".section\t__ex_table,\"a\"\n\t"    \
760 			STR(PTR)"\t1b, 4b\n\t"              \
761 			STR(PTR)"\t2b, 4b\n\t"              \
762 			".previous"                         \
763 		: "=r" (res)                                \
764 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
765 } while(0)
766 
767 #define     _StoreDW(addr, value, res) \
768 do {                                                        \
769 		__asm__ __volatile__ (                      \
770 			"1:\tsdl\t%1, 7(%2)\n"              \
771 			"2:\tsdr\t%1, (%2)\n\t"             \
772 			"li\t%0, 0\n"                       \
773 			"3:\n\t"                            \
774 			".insn\n\t"                         \
775 			".section\t.fixup,\"ax\"\n\t"       \
776 			"4:\tli\t%0, %3\n\t"                \
777 			"j\t3b\n\t"                         \
778 			".previous\n\t"                     \
779 			".section\t__ex_table,\"a\"\n\t"    \
780 			STR(PTR)"\t1b, 4b\n\t"              \
781 			STR(PTR)"\t2b, 4b\n\t"              \
782 			".previous"                         \
783 		: "=r" (res)                                \
784 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
785 } while(0)
786 
787 #else
788 /* MIPSR6 has no swl and sdl instructions */
789 #define     _StoreW(addr, value, res, type)  \
790 do {                                                        \
791 		__asm__ __volatile__ (                      \
792 			".set\tpush\n\t"		    \
793 			".set\tnoat\n\t"		    \
794 			"1:"type##_sb("%1", "0(%2)")"\n\t"  \
795 			"srl\t$1, %1, 0x8\n\t"		    \
796 			"2:"type##_sb("$1", "1(%2)")"\n\t"  \
797 			"srl\t$1, $1,  0x8\n\t"		    \
798 			"3:"type##_sb("$1", "2(%2)")"\n\t"  \
799 			"srl\t$1, $1, 0x8\n\t"		    \
800 			"4:"type##_sb("$1", "3(%2)")"\n\t"  \
801 			".set\tpop\n\t"			    \
802 			"li\t%0, 0\n"			    \
803 			"10:\n\t"			    \
804 			".insn\n\t"			    \
805 			".section\t.fixup,\"ax\"\n\t"	    \
806 			"11:\tli\t%0, %3\n\t"		    \
807 			"j\t10b\n\t"			    \
808 			".previous\n\t"			    \
809 			".section\t__ex_table,\"a\"\n\t"    \
810 			STR(PTR)"\t1b, 11b\n\t"		    \
811 			STR(PTR)"\t2b, 11b\n\t"		    \
812 			STR(PTR)"\t3b, 11b\n\t"		    \
813 			STR(PTR)"\t4b, 11b\n\t"		    \
814 			".previous"			    \
815 		: "=&r" (res)			    	    \
816 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
817 		: "memory");                                \
818 } while(0)
819 
820 #define     _StoreDW(addr, value, res) \
821 do {                                                        \
822 		__asm__ __volatile__ (                      \
823 			".set\tpush\n\t"		    \
824 			".set\tnoat\n\t"		    \
825 			"1:sb\t%1, 0(%2)\n\t"    	    \
826 			"dsrl\t$1, %1, 0x8\n\t"		    \
827 			"2:sb\t$1, 1(%2)\n\t"    	    \
828 			"dsrl\t$1, $1, 0x8\n\t"		    \
829 			"3:sb\t$1, 2(%2)\n\t"    	    \
830 			"dsrl\t$1, $1, 0x8\n\t"		    \
831 			"4:sb\t$1, 3(%2)\n\t"    	    \
832 			"dsrl\t$1, $1, 0x8\n\t"		    \
833 			"5:sb\t$1, 4(%2)\n\t"    	    \
834 			"dsrl\t$1, $1, 0x8\n\t"		    \
835 			"6:sb\t$1, 5(%2)\n\t"    	    \
836 			"dsrl\t$1, $1, 0x8\n\t"		    \
837 			"7:sb\t$1, 6(%2)\n\t"    	    \
838 			"dsrl\t$1, $1, 0x8\n\t"		    \
839 			"8:sb\t$1, 7(%2)\n\t"    	    \
840 			"dsrl\t$1, $1, 0x8\n\t"		    \
841 			".set\tpop\n\t"			    \
842 			"li\t%0, 0\n"			    \
843 			"10:\n\t"			    \
844 			".insn\n\t"			    \
845 			".section\t.fixup,\"ax\"\n\t"	    \
846 			"11:\tli\t%0, %3\n\t"		    \
847 			"j\t10b\n\t"			    \
848 			".previous\n\t"			    \
849 			".section\t__ex_table,\"a\"\n\t"    \
850 			STR(PTR)"\t1b, 11b\n\t"		    \
851 			STR(PTR)"\t2b, 11b\n\t"		    \
852 			STR(PTR)"\t3b, 11b\n\t"		    \
853 			STR(PTR)"\t4b, 11b\n\t"		    \
854 			STR(PTR)"\t5b, 11b\n\t"		    \
855 			STR(PTR)"\t6b, 11b\n\t"		    \
856 			STR(PTR)"\t7b, 11b\n\t"		    \
857 			STR(PTR)"\t8b, 11b\n\t"		    \
858 			".previous"			    \
859 		: "=&r" (res)			    	    \
860 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
861 		: "memory");                                \
862 } while(0)
863 
864 #endif /* CONFIG_CPU_MIPSR6 */
865 #endif
866 
867 #define LoadHWU(addr, value, res)	_LoadHWU(addr, value, res, kernel)
868 #define LoadHWUE(addr, value, res)	_LoadHWU(addr, value, res, user)
869 #define LoadWU(addr, value, res)	_LoadWU(addr, value, res, kernel)
870 #define LoadWUE(addr, value, res)	_LoadWU(addr, value, res, user)
871 #define LoadHW(addr, value, res)	_LoadHW(addr, value, res, kernel)
872 #define LoadHWE(addr, value, res)	_LoadHW(addr, value, res, user)
873 #define LoadW(addr, value, res)		_LoadW(addr, value, res, kernel)
874 #define LoadWE(addr, value, res)	_LoadW(addr, value, res, user)
875 #define LoadDW(addr, value, res)	_LoadDW(addr, value, res)
876 
877 #define StoreHW(addr, value, res)	_StoreHW(addr, value, res, kernel)
878 #define StoreHWE(addr, value, res)	_StoreHW(addr, value, res, user)
879 #define StoreW(addr, value, res)	_StoreW(addr, value, res, kernel)
880 #define StoreWE(addr, value, res)	_StoreW(addr, value, res, user)
881 #define StoreDW(addr, value, res)	_StoreDW(addr, value, res)
882 
883 static void emulate_load_store_insn(struct pt_regs *regs,
884 	void __user *addr, unsigned int __user *pc)
885 {
886 	union mips_instruction insn;
887 	unsigned long value;
888 	unsigned int res, preempted;
889 	unsigned long origpc;
890 	unsigned long orig31;
891 	void __user *fault_addr = NULL;
892 #ifdef	CONFIG_EVA
893 	mm_segment_t seg;
894 #endif
895 	union fpureg *fpr;
896 	enum msa_2b_fmt df;
897 	unsigned int wd;
898 	origpc = (unsigned long)pc;
899 	orig31 = regs->regs[31];
900 
901 	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
902 
903 	/*
904 	 * This load never faults.
905 	 */
906 	__get_user(insn.word, pc);
907 
908 	switch (insn.i_format.opcode) {
909 		/*
910 		 * These are instructions that a compiler doesn't generate.  We
911 		 * can assume therefore that the code is MIPS-aware and
912 		 * really buggy.  Emulating these instructions would break the
913 		 * semantics anyway.
914 		 */
915 	case ll_op:
916 	case lld_op:
917 	case sc_op:
918 	case scd_op:
919 
920 		/*
921 		 * For these instructions the only way to create an address
922 		 * error is an attempted access to kernel/supervisor address
923 		 * space.
924 		 */
925 	case ldl_op:
926 	case ldr_op:
927 	case lwl_op:
928 	case lwr_op:
929 	case sdl_op:
930 	case sdr_op:
931 	case swl_op:
932 	case swr_op:
933 	case lb_op:
934 	case lbu_op:
935 	case sb_op:
936 		goto sigbus;
937 
938 		/*
939 		 * The remaining opcodes are the ones that are really of
940 		 * interest.
941 		 */
942 #ifdef CONFIG_EVA
943 	case spec3_op:
944 		/*
945 		 * we can land here only from kernel accessing user memory,
946 		 * so we need to "switch" the address limit to user space, so
947 		 * address check can work properly.
948 		 */
949 		seg = get_fs();
950 		set_fs(USER_DS);
951 		switch (insn.spec3_format.func) {
952 		case lhe_op:
953 			if (!access_ok(VERIFY_READ, addr, 2)) {
954 				set_fs(seg);
955 				goto sigbus;
956 			}
957 			LoadHWE(addr, value, res);
958 			if (res) {
959 				set_fs(seg);
960 				goto fault;
961 			}
962 			compute_return_epc(regs);
963 			regs->regs[insn.spec3_format.rt] = value;
964 			break;
965 		case lwe_op:
966 			if (!access_ok(VERIFY_READ, addr, 4)) {
967 				set_fs(seg);
968 				goto sigbus;
969 			}
970 				LoadWE(addr, value, res);
971 			if (res) {
972 				set_fs(seg);
973 				goto fault;
974 			}
975 			compute_return_epc(regs);
976 			regs->regs[insn.spec3_format.rt] = value;
977 			break;
978 		case lhue_op:
979 			if (!access_ok(VERIFY_READ, addr, 2)) {
980 				set_fs(seg);
981 				goto sigbus;
982 			}
983 			LoadHWUE(addr, value, res);
984 			if (res) {
985 				set_fs(seg);
986 				goto fault;
987 			}
988 			compute_return_epc(regs);
989 			regs->regs[insn.spec3_format.rt] = value;
990 			break;
991 		case she_op:
992 			if (!access_ok(VERIFY_WRITE, addr, 2)) {
993 				set_fs(seg);
994 				goto sigbus;
995 			}
996 			compute_return_epc(regs);
997 			value = regs->regs[insn.spec3_format.rt];
998 			StoreHWE(addr, value, res);
999 			if (res) {
1000 				set_fs(seg);
1001 				goto fault;
1002 			}
1003 			break;
1004 		case swe_op:
1005 			if (!access_ok(VERIFY_WRITE, addr, 4)) {
1006 				set_fs(seg);
1007 				goto sigbus;
1008 			}
1009 			compute_return_epc(regs);
1010 			value = regs->regs[insn.spec3_format.rt];
1011 			StoreWE(addr, value, res);
1012 			if (res) {
1013 				set_fs(seg);
1014 				goto fault;
1015 			}
1016 			break;
1017 		default:
1018 			set_fs(seg);
1019 			goto sigill;
1020 		}
1021 		set_fs(seg);
1022 		break;
1023 #endif
1024 	case lh_op:
1025 		if (!access_ok(VERIFY_READ, addr, 2))
1026 			goto sigbus;
1027 
1028 		if (config_enabled(CONFIG_EVA)) {
1029 			if (segment_eq(get_fs(), get_ds()))
1030 				LoadHW(addr, value, res);
1031 			else
1032 				LoadHWE(addr, value, res);
1033 		} else {
1034 			LoadHW(addr, value, res);
1035 		}
1036 
1037 		if (res)
1038 			goto fault;
1039 		compute_return_epc(regs);
1040 		regs->regs[insn.i_format.rt] = value;
1041 		break;
1042 
1043 	case lw_op:
1044 		if (!access_ok(VERIFY_READ, addr, 4))
1045 			goto sigbus;
1046 
1047 		if (config_enabled(CONFIG_EVA)) {
1048 			if (segment_eq(get_fs(), get_ds()))
1049 				LoadW(addr, value, res);
1050 			else
1051 				LoadWE(addr, value, res);
1052 		} else {
1053 			LoadW(addr, value, res);
1054 		}
1055 
1056 		if (res)
1057 			goto fault;
1058 		compute_return_epc(regs);
1059 		regs->regs[insn.i_format.rt] = value;
1060 		break;
1061 
1062 	case lhu_op:
1063 		if (!access_ok(VERIFY_READ, addr, 2))
1064 			goto sigbus;
1065 
1066 		if (config_enabled(CONFIG_EVA)) {
1067 			if (segment_eq(get_fs(), get_ds()))
1068 				LoadHWU(addr, value, res);
1069 			else
1070 				LoadHWUE(addr, value, res);
1071 		} else {
1072 			LoadHWU(addr, value, res);
1073 		}
1074 
1075 		if (res)
1076 			goto fault;
1077 		compute_return_epc(regs);
1078 		regs->regs[insn.i_format.rt] = value;
1079 		break;
1080 
1081 	case lwu_op:
1082 #ifdef CONFIG_64BIT
1083 		/*
1084 		 * A 32-bit kernel might be running on a 64-bit processor.  But
1085 		 * if we're on a 32-bit processor and an i-cache incoherency
1086 		 * or race makes us see a 64-bit instruction here the sdl/sdr
1087 		 * would blow up, so for now we don't handle unaligned 64-bit
1088 		 * instructions on 32-bit kernels.
1089 		 */
1090 		if (!access_ok(VERIFY_READ, addr, 4))
1091 			goto sigbus;
1092 
1093 		LoadWU(addr, value, res);
1094 		if (res)
1095 			goto fault;
1096 		compute_return_epc(regs);
1097 		regs->regs[insn.i_format.rt] = value;
1098 		break;
1099 #endif /* CONFIG_64BIT */
1100 
1101 		/* Cannot handle 64-bit instructions in 32-bit kernel */
1102 		goto sigill;
1103 
1104 	case ld_op:
1105 #ifdef CONFIG_64BIT
1106 		/*
1107 		 * A 32-bit kernel might be running on a 64-bit processor.  But
1108 		 * if we're on a 32-bit processor and an i-cache incoherency
1109 		 * or race makes us see a 64-bit instruction here the sdl/sdr
1110 		 * would blow up, so for now we don't handle unaligned 64-bit
1111 		 * instructions on 32-bit kernels.
1112 		 */
1113 		if (!access_ok(VERIFY_READ, addr, 8))
1114 			goto sigbus;
1115 
1116 		LoadDW(addr, value, res);
1117 		if (res)
1118 			goto fault;
1119 		compute_return_epc(regs);
1120 		regs->regs[insn.i_format.rt] = value;
1121 		break;
1122 #endif /* CONFIG_64BIT */
1123 
1124 		/* Cannot handle 64-bit instructions in 32-bit kernel */
1125 		goto sigill;
1126 
1127 	case sh_op:
1128 		if (!access_ok(VERIFY_WRITE, addr, 2))
1129 			goto sigbus;
1130 
1131 		compute_return_epc(regs);
1132 		value = regs->regs[insn.i_format.rt];
1133 
1134 		if (config_enabled(CONFIG_EVA)) {
1135 			if (segment_eq(get_fs(), get_ds()))
1136 				StoreHW(addr, value, res);
1137 			else
1138 				StoreHWE(addr, value, res);
1139 		} else {
1140 			StoreHW(addr, value, res);
1141 		}
1142 
1143 		if (res)
1144 			goto fault;
1145 		break;
1146 
1147 	case sw_op:
1148 		if (!access_ok(VERIFY_WRITE, addr, 4))
1149 			goto sigbus;
1150 
1151 		compute_return_epc(regs);
1152 		value = regs->regs[insn.i_format.rt];
1153 
1154 		if (config_enabled(CONFIG_EVA)) {
1155 			if (segment_eq(get_fs(), get_ds()))
1156 				StoreW(addr, value, res);
1157 			else
1158 				StoreWE(addr, value, res);
1159 		} else {
1160 			StoreW(addr, value, res);
1161 		}
1162 
1163 		if (res)
1164 			goto fault;
1165 		break;
1166 
1167 	case sd_op:
1168 #ifdef CONFIG_64BIT
1169 		/*
1170 		 * A 32-bit kernel might be running on a 64-bit processor.  But
1171 		 * if we're on a 32-bit processor and an i-cache incoherency
1172 		 * or race makes us see a 64-bit instruction here the sdl/sdr
1173 		 * would blow up, so for now we don't handle unaligned 64-bit
1174 		 * instructions on 32-bit kernels.
1175 		 */
1176 		if (!access_ok(VERIFY_WRITE, addr, 8))
1177 			goto sigbus;
1178 
1179 		compute_return_epc(regs);
1180 		value = regs->regs[insn.i_format.rt];
1181 		StoreDW(addr, value, res);
1182 		if (res)
1183 			goto fault;
1184 		break;
1185 #endif /* CONFIG_64BIT */
1186 
1187 		/* Cannot handle 64-bit instructions in 32-bit kernel */
1188 		goto sigill;
1189 
1190 	case lwc1_op:
1191 	case ldc1_op:
1192 	case swc1_op:
1193 	case sdc1_op:
1194 	case cop1x_op:
1195 		die_if_kernel("Unaligned FP access in kernel code", regs);
1196 		BUG_ON(!used_math());
1197 
1198 		lose_fpu(1);	/* Save FPU state for the emulator. */
1199 		res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
1200 					       &fault_addr);
1201 		own_fpu(1);	/* Restore FPU state. */
1202 
1203 		/* Signal if something went wrong. */
1204 		process_fpemu_return(res, fault_addr, 0);
1205 
1206 		if (res == 0)
1207 			break;
1208 		return;
1209 
1210 	case msa_op:
1211 		if (!cpu_has_msa)
1212 			goto sigill;
1213 
1214 		/*
1215 		 * If we've reached this point then userland should have taken
1216 		 * the MSA disabled exception & initialised vector context at
1217 		 * some point in the past.
1218 		 */
1219 		BUG_ON(!thread_msa_context_live());
1220 
1221 		df = insn.msa_mi10_format.df;
1222 		wd = insn.msa_mi10_format.wd;
1223 		fpr = &current->thread.fpu.fpr[wd];
1224 
1225 		switch (insn.msa_mi10_format.func) {
1226 		case msa_ld_op:
1227 			if (!access_ok(VERIFY_READ, addr, sizeof(*fpr)))
1228 				goto sigbus;
1229 
1230 			do {
1231 				/*
1232 				 * If we have live MSA context keep track of
1233 				 * whether we get preempted in order to avoid
1234 				 * the register context we load being clobbered
1235 				 * by the live context as it's saved during
1236 				 * preemption. If we don't have live context
1237 				 * then it can't be saved to clobber the value
1238 				 * we load.
1239 				 */
1240 				preempted = test_thread_flag(TIF_USEDMSA);
1241 
1242 				res = __copy_from_user_inatomic(fpr, addr,
1243 								sizeof(*fpr));
1244 				if (res)
1245 					goto fault;
1246 
1247 				/*
1248 				 * Update the hardware register if it is in use
1249 				 * by the task in this quantum, in order to
1250 				 * avoid having to save & restore the whole
1251 				 * vector context.
1252 				 */
1253 				preempt_disable();
1254 				if (test_thread_flag(TIF_USEDMSA)) {
1255 					write_msa_wr(wd, fpr, df);
1256 					preempted = 0;
1257 				}
1258 				preempt_enable();
1259 			} while (preempted);
1260 			break;
1261 
1262 		case msa_st_op:
1263 			if (!access_ok(VERIFY_WRITE, addr, sizeof(*fpr)))
1264 				goto sigbus;
1265 
1266 			/*
1267 			 * Update from the hardware register if it is in use by
1268 			 * the task in this quantum, in order to avoid having to
1269 			 * save & restore the whole vector context.
1270 			 */
1271 			preempt_disable();
1272 			if (test_thread_flag(TIF_USEDMSA))
1273 				read_msa_wr(wd, fpr, df);
1274 			preempt_enable();
1275 
1276 			res = __copy_to_user_inatomic(addr, fpr, sizeof(*fpr));
1277 			if (res)
1278 				goto fault;
1279 			break;
1280 
1281 		default:
1282 			goto sigbus;
1283 		}
1284 
1285 		compute_return_epc(regs);
1286 		break;
1287 
1288 #ifndef CONFIG_CPU_MIPSR6
1289 	/*
1290 	 * COP2 is available to implementor for application specific use.
1291 	 * It's up to applications to register a notifier chain and do
1292 	 * whatever they have to do, including possible sending of signals.
1293 	 *
1294 	 * This instruction has been reallocated in Release 6
1295 	 */
1296 	case lwc2_op:
1297 		cu2_notifier_call_chain(CU2_LWC2_OP, regs);
1298 		break;
1299 
1300 	case ldc2_op:
1301 		cu2_notifier_call_chain(CU2_LDC2_OP, regs);
1302 		break;
1303 
1304 	case swc2_op:
1305 		cu2_notifier_call_chain(CU2_SWC2_OP, regs);
1306 		break;
1307 
1308 	case sdc2_op:
1309 		cu2_notifier_call_chain(CU2_SDC2_OP, regs);
1310 		break;
1311 #endif
1312 	default:
1313 		/*
1314 		 * Pheeee...  We encountered an yet unknown instruction or
1315 		 * cache coherence problem.  Die sucker, die ...
1316 		 */
1317 		goto sigill;
1318 	}
1319 
1320 #ifdef CONFIG_DEBUG_FS
1321 	unaligned_instructions++;
1322 #endif
1323 
1324 	return;
1325 
1326 fault:
1327 	/* roll back jump/branch */
1328 	regs->cp0_epc = origpc;
1329 	regs->regs[31] = orig31;
1330 	/* Did we have an exception handler installed? */
1331 	if (fixup_exception(regs))
1332 		return;
1333 
1334 	die_if_kernel("Unhandled kernel unaligned access", regs);
1335 	force_sig(SIGSEGV, current);
1336 
1337 	return;
1338 
1339 sigbus:
1340 	die_if_kernel("Unhandled kernel unaligned access", regs);
1341 	force_sig(SIGBUS, current);
1342 
1343 	return;
1344 
1345 sigill:
1346 	die_if_kernel
1347 	    ("Unhandled kernel unaligned access or invalid instruction", regs);
1348 	force_sig(SIGILL, current);
1349 }
1350 
1351 /* Recode table from 16-bit register notation to 32-bit GPR. */
1352 const int reg16to32[] = { 16, 17, 2, 3, 4, 5, 6, 7 };
1353 
1354 /* Recode table from 16-bit STORE register notation to 32-bit GPR. */
1355 const int reg16to32st[] = { 0, 17, 2, 3, 4, 5, 6, 7 };
1356 
1357 static void emulate_load_store_microMIPS(struct pt_regs *regs,
1358 					 void __user *addr)
1359 {
1360 	unsigned long value;
1361 	unsigned int res;
1362 	int i;
1363 	unsigned int reg = 0, rvar;
1364 	unsigned long orig31;
1365 	u16 __user *pc16;
1366 	u16 halfword;
1367 	unsigned int word;
1368 	unsigned long origpc, contpc;
1369 	union mips_instruction insn;
1370 	struct mm_decoded_insn mminsn;
1371 	void __user *fault_addr = NULL;
1372 
1373 	origpc = regs->cp0_epc;
1374 	orig31 = regs->regs[31];
1375 
1376 	mminsn.micro_mips_mode = 1;
1377 
1378 	/*
1379 	 * This load never faults.
1380 	 */
1381 	pc16 = (unsigned short __user *)msk_isa16_mode(regs->cp0_epc);
1382 	__get_user(halfword, pc16);
1383 	pc16++;
1384 	contpc = regs->cp0_epc + 2;
1385 	word = ((unsigned int)halfword << 16);
1386 	mminsn.pc_inc = 2;
1387 
1388 	if (!mm_insn_16bit(halfword)) {
1389 		__get_user(halfword, pc16);
1390 		pc16++;
1391 		contpc = regs->cp0_epc + 4;
1392 		mminsn.pc_inc = 4;
1393 		word |= halfword;
1394 	}
1395 	mminsn.insn = word;
1396 
1397 	if (get_user(halfword, pc16))
1398 		goto fault;
1399 	mminsn.next_pc_inc = 2;
1400 	word = ((unsigned int)halfword << 16);
1401 
1402 	if (!mm_insn_16bit(halfword)) {
1403 		pc16++;
1404 		if (get_user(halfword, pc16))
1405 			goto fault;
1406 		mminsn.next_pc_inc = 4;
1407 		word |= halfword;
1408 	}
1409 	mminsn.next_insn = word;
1410 
1411 	insn = (union mips_instruction)(mminsn.insn);
1412 	if (mm_isBranchInstr(regs, mminsn, &contpc))
1413 		insn = (union mips_instruction)(mminsn.next_insn);
1414 
1415 	/*  Parse instruction to find what to do */
1416 
1417 	switch (insn.mm_i_format.opcode) {
1418 
1419 	case mm_pool32a_op:
1420 		switch (insn.mm_x_format.func) {
1421 		case mm_lwxs_op:
1422 			reg = insn.mm_x_format.rd;
1423 			goto loadW;
1424 		}
1425 
1426 		goto sigbus;
1427 
1428 	case mm_pool32b_op:
1429 		switch (insn.mm_m_format.func) {
1430 		case mm_lwp_func:
1431 			reg = insn.mm_m_format.rd;
1432 			if (reg == 31)
1433 				goto sigbus;
1434 
1435 			if (!access_ok(VERIFY_READ, addr, 8))
1436 				goto sigbus;
1437 
1438 			LoadW(addr, value, res);
1439 			if (res)
1440 				goto fault;
1441 			regs->regs[reg] = value;
1442 			addr += 4;
1443 			LoadW(addr, value, res);
1444 			if (res)
1445 				goto fault;
1446 			regs->regs[reg + 1] = value;
1447 			goto success;
1448 
1449 		case mm_swp_func:
1450 			reg = insn.mm_m_format.rd;
1451 			if (reg == 31)
1452 				goto sigbus;
1453 
1454 			if (!access_ok(VERIFY_WRITE, addr, 8))
1455 				goto sigbus;
1456 
1457 			value = regs->regs[reg];
1458 			StoreW(addr, value, res);
1459 			if (res)
1460 				goto fault;
1461 			addr += 4;
1462 			value = regs->regs[reg + 1];
1463 			StoreW(addr, value, res);
1464 			if (res)
1465 				goto fault;
1466 			goto success;
1467 
1468 		case mm_ldp_func:
1469 #ifdef CONFIG_64BIT
1470 			reg = insn.mm_m_format.rd;
1471 			if (reg == 31)
1472 				goto sigbus;
1473 
1474 			if (!access_ok(VERIFY_READ, addr, 16))
1475 				goto sigbus;
1476 
1477 			LoadDW(addr, value, res);
1478 			if (res)
1479 				goto fault;
1480 			regs->regs[reg] = value;
1481 			addr += 8;
1482 			LoadDW(addr, value, res);
1483 			if (res)
1484 				goto fault;
1485 			regs->regs[reg + 1] = value;
1486 			goto success;
1487 #endif /* CONFIG_64BIT */
1488 
1489 			goto sigill;
1490 
1491 		case mm_sdp_func:
1492 #ifdef CONFIG_64BIT
1493 			reg = insn.mm_m_format.rd;
1494 			if (reg == 31)
1495 				goto sigbus;
1496 
1497 			if (!access_ok(VERIFY_WRITE, addr, 16))
1498 				goto sigbus;
1499 
1500 			value = regs->regs[reg];
1501 			StoreDW(addr, value, res);
1502 			if (res)
1503 				goto fault;
1504 			addr += 8;
1505 			value = regs->regs[reg + 1];
1506 			StoreDW(addr, value, res);
1507 			if (res)
1508 				goto fault;
1509 			goto success;
1510 #endif /* CONFIG_64BIT */
1511 
1512 			goto sigill;
1513 
1514 		case mm_lwm32_func:
1515 			reg = insn.mm_m_format.rd;
1516 			rvar = reg & 0xf;
1517 			if ((rvar > 9) || !reg)
1518 				goto sigill;
1519 			if (reg & 0x10) {
1520 				if (!access_ok
1521 				    (VERIFY_READ, addr, 4 * (rvar + 1)))
1522 					goto sigbus;
1523 			} else {
1524 				if (!access_ok(VERIFY_READ, addr, 4 * rvar))
1525 					goto sigbus;
1526 			}
1527 			if (rvar == 9)
1528 				rvar = 8;
1529 			for (i = 16; rvar; rvar--, i++) {
1530 				LoadW(addr, value, res);
1531 				if (res)
1532 					goto fault;
1533 				addr += 4;
1534 				regs->regs[i] = value;
1535 			}
1536 			if ((reg & 0xf) == 9) {
1537 				LoadW(addr, value, res);
1538 				if (res)
1539 					goto fault;
1540 				addr += 4;
1541 				regs->regs[30] = value;
1542 			}
1543 			if (reg & 0x10) {
1544 				LoadW(addr, value, res);
1545 				if (res)
1546 					goto fault;
1547 				regs->regs[31] = value;
1548 			}
1549 			goto success;
1550 
1551 		case mm_swm32_func:
1552 			reg = insn.mm_m_format.rd;
1553 			rvar = reg & 0xf;
1554 			if ((rvar > 9) || !reg)
1555 				goto sigill;
1556 			if (reg & 0x10) {
1557 				if (!access_ok
1558 				    (VERIFY_WRITE, addr, 4 * (rvar + 1)))
1559 					goto sigbus;
1560 			} else {
1561 				if (!access_ok(VERIFY_WRITE, addr, 4 * rvar))
1562 					goto sigbus;
1563 			}
1564 			if (rvar == 9)
1565 				rvar = 8;
1566 			for (i = 16; rvar; rvar--, i++) {
1567 				value = regs->regs[i];
1568 				StoreW(addr, value, res);
1569 				if (res)
1570 					goto fault;
1571 				addr += 4;
1572 			}
1573 			if ((reg & 0xf) == 9) {
1574 				value = regs->regs[30];
1575 				StoreW(addr, value, res);
1576 				if (res)
1577 					goto fault;
1578 				addr += 4;
1579 			}
1580 			if (reg & 0x10) {
1581 				value = regs->regs[31];
1582 				StoreW(addr, value, res);
1583 				if (res)
1584 					goto fault;
1585 			}
1586 			goto success;
1587 
1588 		case mm_ldm_func:
1589 #ifdef CONFIG_64BIT
1590 			reg = insn.mm_m_format.rd;
1591 			rvar = reg & 0xf;
1592 			if ((rvar > 9) || !reg)
1593 				goto sigill;
1594 			if (reg & 0x10) {
1595 				if (!access_ok
1596 				    (VERIFY_READ, addr, 8 * (rvar + 1)))
1597 					goto sigbus;
1598 			} else {
1599 				if (!access_ok(VERIFY_READ, addr, 8 * rvar))
1600 					goto sigbus;
1601 			}
1602 			if (rvar == 9)
1603 				rvar = 8;
1604 
1605 			for (i = 16; rvar; rvar--, i++) {
1606 				LoadDW(addr, value, res);
1607 				if (res)
1608 					goto fault;
1609 				addr += 4;
1610 				regs->regs[i] = value;
1611 			}
1612 			if ((reg & 0xf) == 9) {
1613 				LoadDW(addr, value, res);
1614 				if (res)
1615 					goto fault;
1616 				addr += 8;
1617 				regs->regs[30] = value;
1618 			}
1619 			if (reg & 0x10) {
1620 				LoadDW(addr, value, res);
1621 				if (res)
1622 					goto fault;
1623 				regs->regs[31] = value;
1624 			}
1625 			goto success;
1626 #endif /* CONFIG_64BIT */
1627 
1628 			goto sigill;
1629 
1630 		case mm_sdm_func:
1631 #ifdef CONFIG_64BIT
1632 			reg = insn.mm_m_format.rd;
1633 			rvar = reg & 0xf;
1634 			if ((rvar > 9) || !reg)
1635 				goto sigill;
1636 			if (reg & 0x10) {
1637 				if (!access_ok
1638 				    (VERIFY_WRITE, addr, 8 * (rvar + 1)))
1639 					goto sigbus;
1640 			} else {
1641 				if (!access_ok(VERIFY_WRITE, addr, 8 * rvar))
1642 					goto sigbus;
1643 			}
1644 			if (rvar == 9)
1645 				rvar = 8;
1646 
1647 			for (i = 16; rvar; rvar--, i++) {
1648 				value = regs->regs[i];
1649 				StoreDW(addr, value, res);
1650 				if (res)
1651 					goto fault;
1652 				addr += 8;
1653 			}
1654 			if ((reg & 0xf) == 9) {
1655 				value = regs->regs[30];
1656 				StoreDW(addr, value, res);
1657 				if (res)
1658 					goto fault;
1659 				addr += 8;
1660 			}
1661 			if (reg & 0x10) {
1662 				value = regs->regs[31];
1663 				StoreDW(addr, value, res);
1664 				if (res)
1665 					goto fault;
1666 			}
1667 			goto success;
1668 #endif /* CONFIG_64BIT */
1669 
1670 			goto sigill;
1671 
1672 			/*  LWC2, SWC2, LDC2, SDC2 are not serviced */
1673 		}
1674 
1675 		goto sigbus;
1676 
1677 	case mm_pool32c_op:
1678 		switch (insn.mm_m_format.func) {
1679 		case mm_lwu_func:
1680 			reg = insn.mm_m_format.rd;
1681 			goto loadWU;
1682 		}
1683 
1684 		/*  LL,SC,LLD,SCD are not serviced */
1685 		goto sigbus;
1686 
1687 	case mm_pool32f_op:
1688 		switch (insn.mm_x_format.func) {
1689 		case mm_lwxc1_func:
1690 		case mm_swxc1_func:
1691 		case mm_ldxc1_func:
1692 		case mm_sdxc1_func:
1693 			goto fpu_emul;
1694 		}
1695 
1696 		goto sigbus;
1697 
1698 	case mm_ldc132_op:
1699 	case mm_sdc132_op:
1700 	case mm_lwc132_op:
1701 	case mm_swc132_op:
1702 fpu_emul:
1703 		/* roll back jump/branch */
1704 		regs->cp0_epc = origpc;
1705 		regs->regs[31] = orig31;
1706 
1707 		die_if_kernel("Unaligned FP access in kernel code", regs);
1708 		BUG_ON(!used_math());
1709 		BUG_ON(!is_fpu_owner());
1710 
1711 		lose_fpu(1);	/* save the FPU state for the emulator */
1712 		res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
1713 					       &fault_addr);
1714 		own_fpu(1);	/* restore FPU state */
1715 
1716 		/* If something went wrong, signal */
1717 		process_fpemu_return(res, fault_addr, 0);
1718 
1719 		if (res == 0)
1720 			goto success;
1721 		return;
1722 
1723 	case mm_lh32_op:
1724 		reg = insn.mm_i_format.rt;
1725 		goto loadHW;
1726 
1727 	case mm_lhu32_op:
1728 		reg = insn.mm_i_format.rt;
1729 		goto loadHWU;
1730 
1731 	case mm_lw32_op:
1732 		reg = insn.mm_i_format.rt;
1733 		goto loadW;
1734 
1735 	case mm_sh32_op:
1736 		reg = insn.mm_i_format.rt;
1737 		goto storeHW;
1738 
1739 	case mm_sw32_op:
1740 		reg = insn.mm_i_format.rt;
1741 		goto storeW;
1742 
1743 	case mm_ld32_op:
1744 		reg = insn.mm_i_format.rt;
1745 		goto loadDW;
1746 
1747 	case mm_sd32_op:
1748 		reg = insn.mm_i_format.rt;
1749 		goto storeDW;
1750 
1751 	case mm_pool16c_op:
1752 		switch (insn.mm16_m_format.func) {
1753 		case mm_lwm16_op:
1754 			reg = insn.mm16_m_format.rlist;
1755 			rvar = reg + 1;
1756 			if (!access_ok(VERIFY_READ, addr, 4 * rvar))
1757 				goto sigbus;
1758 
1759 			for (i = 16; rvar; rvar--, i++) {
1760 				LoadW(addr, value, res);
1761 				if (res)
1762 					goto fault;
1763 				addr += 4;
1764 				regs->regs[i] = value;
1765 			}
1766 			LoadW(addr, value, res);
1767 			if (res)
1768 				goto fault;
1769 			regs->regs[31] = value;
1770 
1771 			goto success;
1772 
1773 		case mm_swm16_op:
1774 			reg = insn.mm16_m_format.rlist;
1775 			rvar = reg + 1;
1776 			if (!access_ok(VERIFY_WRITE, addr, 4 * rvar))
1777 				goto sigbus;
1778 
1779 			for (i = 16; rvar; rvar--, i++) {
1780 				value = regs->regs[i];
1781 				StoreW(addr, value, res);
1782 				if (res)
1783 					goto fault;
1784 				addr += 4;
1785 			}
1786 			value = regs->regs[31];
1787 			StoreW(addr, value, res);
1788 			if (res)
1789 				goto fault;
1790 
1791 			goto success;
1792 
1793 		}
1794 
1795 		goto sigbus;
1796 
1797 	case mm_lhu16_op:
1798 		reg = reg16to32[insn.mm16_rb_format.rt];
1799 		goto loadHWU;
1800 
1801 	case mm_lw16_op:
1802 		reg = reg16to32[insn.mm16_rb_format.rt];
1803 		goto loadW;
1804 
1805 	case mm_sh16_op:
1806 		reg = reg16to32st[insn.mm16_rb_format.rt];
1807 		goto storeHW;
1808 
1809 	case mm_sw16_op:
1810 		reg = reg16to32st[insn.mm16_rb_format.rt];
1811 		goto storeW;
1812 
1813 	case mm_lwsp16_op:
1814 		reg = insn.mm16_r5_format.rt;
1815 		goto loadW;
1816 
1817 	case mm_swsp16_op:
1818 		reg = insn.mm16_r5_format.rt;
1819 		goto storeW;
1820 
1821 	case mm_lwgp16_op:
1822 		reg = reg16to32[insn.mm16_r3_format.rt];
1823 		goto loadW;
1824 
1825 	default:
1826 		goto sigill;
1827 	}
1828 
1829 loadHW:
1830 	if (!access_ok(VERIFY_READ, addr, 2))
1831 		goto sigbus;
1832 
1833 	LoadHW(addr, value, res);
1834 	if (res)
1835 		goto fault;
1836 	regs->regs[reg] = value;
1837 	goto success;
1838 
1839 loadHWU:
1840 	if (!access_ok(VERIFY_READ, addr, 2))
1841 		goto sigbus;
1842 
1843 	LoadHWU(addr, value, res);
1844 	if (res)
1845 		goto fault;
1846 	regs->regs[reg] = value;
1847 	goto success;
1848 
1849 loadW:
1850 	if (!access_ok(VERIFY_READ, addr, 4))
1851 		goto sigbus;
1852 
1853 	LoadW(addr, value, res);
1854 	if (res)
1855 		goto fault;
1856 	regs->regs[reg] = value;
1857 	goto success;
1858 
1859 loadWU:
1860 #ifdef CONFIG_64BIT
1861 	/*
1862 	 * A 32-bit kernel might be running on a 64-bit processor.  But
1863 	 * if we're on a 32-bit processor and an i-cache incoherency
1864 	 * or race makes us see a 64-bit instruction here the sdl/sdr
1865 	 * would blow up, so for now we don't handle unaligned 64-bit
1866 	 * instructions on 32-bit kernels.
1867 	 */
1868 	if (!access_ok(VERIFY_READ, addr, 4))
1869 		goto sigbus;
1870 
1871 	LoadWU(addr, value, res);
1872 	if (res)
1873 		goto fault;
1874 	regs->regs[reg] = value;
1875 	goto success;
1876 #endif /* CONFIG_64BIT */
1877 
1878 	/* Cannot handle 64-bit instructions in 32-bit kernel */
1879 	goto sigill;
1880 
1881 loadDW:
1882 #ifdef CONFIG_64BIT
1883 	/*
1884 	 * A 32-bit kernel might be running on a 64-bit processor.  But
1885 	 * if we're on a 32-bit processor and an i-cache incoherency
1886 	 * or race makes us see a 64-bit instruction here the sdl/sdr
1887 	 * would blow up, so for now we don't handle unaligned 64-bit
1888 	 * instructions on 32-bit kernels.
1889 	 */
1890 	if (!access_ok(VERIFY_READ, addr, 8))
1891 		goto sigbus;
1892 
1893 	LoadDW(addr, value, res);
1894 	if (res)
1895 		goto fault;
1896 	regs->regs[reg] = value;
1897 	goto success;
1898 #endif /* CONFIG_64BIT */
1899 
1900 	/* Cannot handle 64-bit instructions in 32-bit kernel */
1901 	goto sigill;
1902 
1903 storeHW:
1904 	if (!access_ok(VERIFY_WRITE, addr, 2))
1905 		goto sigbus;
1906 
1907 	value = regs->regs[reg];
1908 	StoreHW(addr, value, res);
1909 	if (res)
1910 		goto fault;
1911 	goto success;
1912 
1913 storeW:
1914 	if (!access_ok(VERIFY_WRITE, addr, 4))
1915 		goto sigbus;
1916 
1917 	value = regs->regs[reg];
1918 	StoreW(addr, value, res);
1919 	if (res)
1920 		goto fault;
1921 	goto success;
1922 
1923 storeDW:
1924 #ifdef CONFIG_64BIT
1925 	/*
1926 	 * A 32-bit kernel might be running on a 64-bit processor.  But
1927 	 * if we're on a 32-bit processor and an i-cache incoherency
1928 	 * or race makes us see a 64-bit instruction here the sdl/sdr
1929 	 * would blow up, so for now we don't handle unaligned 64-bit
1930 	 * instructions on 32-bit kernels.
1931 	 */
1932 	if (!access_ok(VERIFY_WRITE, addr, 8))
1933 		goto sigbus;
1934 
1935 	value = regs->regs[reg];
1936 	StoreDW(addr, value, res);
1937 	if (res)
1938 		goto fault;
1939 	goto success;
1940 #endif /* CONFIG_64BIT */
1941 
1942 	/* Cannot handle 64-bit instructions in 32-bit kernel */
1943 	goto sigill;
1944 
1945 success:
1946 	regs->cp0_epc = contpc;	/* advance or branch */
1947 
1948 #ifdef CONFIG_DEBUG_FS
1949 	unaligned_instructions++;
1950 #endif
1951 	return;
1952 
1953 fault:
1954 	/* roll back jump/branch */
1955 	regs->cp0_epc = origpc;
1956 	regs->regs[31] = orig31;
1957 	/* Did we have an exception handler installed? */
1958 	if (fixup_exception(regs))
1959 		return;
1960 
1961 	die_if_kernel("Unhandled kernel unaligned access", regs);
1962 	force_sig(SIGSEGV, current);
1963 
1964 	return;
1965 
1966 sigbus:
1967 	die_if_kernel("Unhandled kernel unaligned access", regs);
1968 	force_sig(SIGBUS, current);
1969 
1970 	return;
1971 
1972 sigill:
1973 	die_if_kernel
1974 	    ("Unhandled kernel unaligned access or invalid instruction", regs);
1975 	force_sig(SIGILL, current);
1976 }
1977 
1978 static void emulate_load_store_MIPS16e(struct pt_regs *regs, void __user * addr)
1979 {
1980 	unsigned long value;
1981 	unsigned int res;
1982 	int reg;
1983 	unsigned long orig31;
1984 	u16 __user *pc16;
1985 	unsigned long origpc;
1986 	union mips16e_instruction mips16inst, oldinst;
1987 
1988 	origpc = regs->cp0_epc;
1989 	orig31 = regs->regs[31];
1990 	pc16 = (unsigned short __user *)msk_isa16_mode(origpc);
1991 	/*
1992 	 * This load never faults.
1993 	 */
1994 	__get_user(mips16inst.full, pc16);
1995 	oldinst = mips16inst;
1996 
1997 	/* skip EXTEND instruction */
1998 	if (mips16inst.ri.opcode == MIPS16e_extend_op) {
1999 		pc16++;
2000 		__get_user(mips16inst.full, pc16);
2001 	} else if (delay_slot(regs)) {
2002 		/*  skip jump instructions */
2003 		/*  JAL/JALX are 32 bits but have OPCODE in first short int */
2004 		if (mips16inst.ri.opcode == MIPS16e_jal_op)
2005 			pc16++;
2006 		pc16++;
2007 		if (get_user(mips16inst.full, pc16))
2008 			goto sigbus;
2009 	}
2010 
2011 	switch (mips16inst.ri.opcode) {
2012 	case MIPS16e_i64_op:	/* I64 or RI64 instruction */
2013 		switch (mips16inst.i64.func) {	/* I64/RI64 func field check */
2014 		case MIPS16e_ldpc_func:
2015 		case MIPS16e_ldsp_func:
2016 			reg = reg16to32[mips16inst.ri64.ry];
2017 			goto loadDW;
2018 
2019 		case MIPS16e_sdsp_func:
2020 			reg = reg16to32[mips16inst.ri64.ry];
2021 			goto writeDW;
2022 
2023 		case MIPS16e_sdrasp_func:
2024 			reg = 29;	/* GPRSP */
2025 			goto writeDW;
2026 		}
2027 
2028 		goto sigbus;
2029 
2030 	case MIPS16e_swsp_op:
2031 	case MIPS16e_lwpc_op:
2032 	case MIPS16e_lwsp_op:
2033 		reg = reg16to32[mips16inst.ri.rx];
2034 		break;
2035 
2036 	case MIPS16e_i8_op:
2037 		if (mips16inst.i8.func != MIPS16e_swrasp_func)
2038 			goto sigbus;
2039 		reg = 29;	/* GPRSP */
2040 		break;
2041 
2042 	default:
2043 		reg = reg16to32[mips16inst.rri.ry];
2044 		break;
2045 	}
2046 
2047 	switch (mips16inst.ri.opcode) {
2048 
2049 	case MIPS16e_lb_op:
2050 	case MIPS16e_lbu_op:
2051 	case MIPS16e_sb_op:
2052 		goto sigbus;
2053 
2054 	case MIPS16e_lh_op:
2055 		if (!access_ok(VERIFY_READ, addr, 2))
2056 			goto sigbus;
2057 
2058 		LoadHW(addr, value, res);
2059 		if (res)
2060 			goto fault;
2061 		MIPS16e_compute_return_epc(regs, &oldinst);
2062 		regs->regs[reg] = value;
2063 		break;
2064 
2065 	case MIPS16e_lhu_op:
2066 		if (!access_ok(VERIFY_READ, addr, 2))
2067 			goto sigbus;
2068 
2069 		LoadHWU(addr, value, res);
2070 		if (res)
2071 			goto fault;
2072 		MIPS16e_compute_return_epc(regs, &oldinst);
2073 		regs->regs[reg] = value;
2074 		break;
2075 
2076 	case MIPS16e_lw_op:
2077 	case MIPS16e_lwpc_op:
2078 	case MIPS16e_lwsp_op:
2079 		if (!access_ok(VERIFY_READ, addr, 4))
2080 			goto sigbus;
2081 
2082 		LoadW(addr, value, res);
2083 		if (res)
2084 			goto fault;
2085 		MIPS16e_compute_return_epc(regs, &oldinst);
2086 		regs->regs[reg] = value;
2087 		break;
2088 
2089 	case MIPS16e_lwu_op:
2090 #ifdef CONFIG_64BIT
2091 		/*
2092 		 * A 32-bit kernel might be running on a 64-bit processor.  But
2093 		 * if we're on a 32-bit processor and an i-cache incoherency
2094 		 * or race makes us see a 64-bit instruction here the sdl/sdr
2095 		 * would blow up, so for now we don't handle unaligned 64-bit
2096 		 * instructions on 32-bit kernels.
2097 		 */
2098 		if (!access_ok(VERIFY_READ, addr, 4))
2099 			goto sigbus;
2100 
2101 		LoadWU(addr, value, res);
2102 		if (res)
2103 			goto fault;
2104 		MIPS16e_compute_return_epc(regs, &oldinst);
2105 		regs->regs[reg] = value;
2106 		break;
2107 #endif /* CONFIG_64BIT */
2108 
2109 		/* Cannot handle 64-bit instructions in 32-bit kernel */
2110 		goto sigill;
2111 
2112 	case MIPS16e_ld_op:
2113 loadDW:
2114 #ifdef CONFIG_64BIT
2115 		/*
2116 		 * A 32-bit kernel might be running on a 64-bit processor.  But
2117 		 * if we're on a 32-bit processor and an i-cache incoherency
2118 		 * or race makes us see a 64-bit instruction here the sdl/sdr
2119 		 * would blow up, so for now we don't handle unaligned 64-bit
2120 		 * instructions on 32-bit kernels.
2121 		 */
2122 		if (!access_ok(VERIFY_READ, addr, 8))
2123 			goto sigbus;
2124 
2125 		LoadDW(addr, value, res);
2126 		if (res)
2127 			goto fault;
2128 		MIPS16e_compute_return_epc(regs, &oldinst);
2129 		regs->regs[reg] = value;
2130 		break;
2131 #endif /* CONFIG_64BIT */
2132 
2133 		/* Cannot handle 64-bit instructions in 32-bit kernel */
2134 		goto sigill;
2135 
2136 	case MIPS16e_sh_op:
2137 		if (!access_ok(VERIFY_WRITE, addr, 2))
2138 			goto sigbus;
2139 
2140 		MIPS16e_compute_return_epc(regs, &oldinst);
2141 		value = regs->regs[reg];
2142 		StoreHW(addr, value, res);
2143 		if (res)
2144 			goto fault;
2145 		break;
2146 
2147 	case MIPS16e_sw_op:
2148 	case MIPS16e_swsp_op:
2149 	case MIPS16e_i8_op:	/* actually - MIPS16e_swrasp_func */
2150 		if (!access_ok(VERIFY_WRITE, addr, 4))
2151 			goto sigbus;
2152 
2153 		MIPS16e_compute_return_epc(regs, &oldinst);
2154 		value = regs->regs[reg];
2155 		StoreW(addr, value, res);
2156 		if (res)
2157 			goto fault;
2158 		break;
2159 
2160 	case MIPS16e_sd_op:
2161 writeDW:
2162 #ifdef CONFIG_64BIT
2163 		/*
2164 		 * A 32-bit kernel might be running on a 64-bit processor.  But
2165 		 * if we're on a 32-bit processor and an i-cache incoherency
2166 		 * or race makes us see a 64-bit instruction here the sdl/sdr
2167 		 * would blow up, so for now we don't handle unaligned 64-bit
2168 		 * instructions on 32-bit kernels.
2169 		 */
2170 		if (!access_ok(VERIFY_WRITE, addr, 8))
2171 			goto sigbus;
2172 
2173 		MIPS16e_compute_return_epc(regs, &oldinst);
2174 		value = regs->regs[reg];
2175 		StoreDW(addr, value, res);
2176 		if (res)
2177 			goto fault;
2178 		break;
2179 #endif /* CONFIG_64BIT */
2180 
2181 		/* Cannot handle 64-bit instructions in 32-bit kernel */
2182 		goto sigill;
2183 
2184 	default:
2185 		/*
2186 		 * Pheeee...  We encountered an yet unknown instruction or
2187 		 * cache coherence problem.  Die sucker, die ...
2188 		 */
2189 		goto sigill;
2190 	}
2191 
2192 #ifdef CONFIG_DEBUG_FS
2193 	unaligned_instructions++;
2194 #endif
2195 
2196 	return;
2197 
2198 fault:
2199 	/* roll back jump/branch */
2200 	regs->cp0_epc = origpc;
2201 	regs->regs[31] = orig31;
2202 	/* Did we have an exception handler installed? */
2203 	if (fixup_exception(regs))
2204 		return;
2205 
2206 	die_if_kernel("Unhandled kernel unaligned access", regs);
2207 	force_sig(SIGSEGV, current);
2208 
2209 	return;
2210 
2211 sigbus:
2212 	die_if_kernel("Unhandled kernel unaligned access", regs);
2213 	force_sig(SIGBUS, current);
2214 
2215 	return;
2216 
2217 sigill:
2218 	die_if_kernel
2219 	    ("Unhandled kernel unaligned access or invalid instruction", regs);
2220 	force_sig(SIGILL, current);
2221 }
2222 
2223 asmlinkage void do_ade(struct pt_regs *regs)
2224 {
2225 	enum ctx_state prev_state;
2226 	unsigned int __user *pc;
2227 	mm_segment_t seg;
2228 
2229 	prev_state = exception_enter();
2230 	perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS,
2231 			1, regs, regs->cp0_badvaddr);
2232 	/*
2233 	 * Did we catch a fault trying to load an instruction?
2234 	 */
2235 	if (regs->cp0_badvaddr == regs->cp0_epc)
2236 		goto sigbus;
2237 
2238 	if (user_mode(regs) && !test_thread_flag(TIF_FIXADE))
2239 		goto sigbus;
2240 	if (unaligned_action == UNALIGNED_ACTION_SIGNAL)
2241 		goto sigbus;
2242 
2243 	/*
2244 	 * Do branch emulation only if we didn't forward the exception.
2245 	 * This is all so but ugly ...
2246 	 */
2247 
2248 	/*
2249 	 * Are we running in microMIPS mode?
2250 	 */
2251 	if (get_isa16_mode(regs->cp0_epc)) {
2252 		/*
2253 		 * Did we catch a fault trying to load an instruction in
2254 		 * 16-bit mode?
2255 		 */
2256 		if (regs->cp0_badvaddr == msk_isa16_mode(regs->cp0_epc))
2257 			goto sigbus;
2258 		if (unaligned_action == UNALIGNED_ACTION_SHOW)
2259 			show_registers(regs);
2260 
2261 		if (cpu_has_mmips) {
2262 			seg = get_fs();
2263 			if (!user_mode(regs))
2264 				set_fs(KERNEL_DS);
2265 			emulate_load_store_microMIPS(regs,
2266 				(void __user *)regs->cp0_badvaddr);
2267 			set_fs(seg);
2268 
2269 			return;
2270 		}
2271 
2272 		if (cpu_has_mips16) {
2273 			seg = get_fs();
2274 			if (!user_mode(regs))
2275 				set_fs(KERNEL_DS);
2276 			emulate_load_store_MIPS16e(regs,
2277 				(void __user *)regs->cp0_badvaddr);
2278 			set_fs(seg);
2279 
2280 			return;
2281 	}
2282 
2283 		goto sigbus;
2284 	}
2285 
2286 	if (unaligned_action == UNALIGNED_ACTION_SHOW)
2287 		show_registers(regs);
2288 	pc = (unsigned int __user *)exception_epc(regs);
2289 
2290 	seg = get_fs();
2291 	if (!user_mode(regs))
2292 		set_fs(KERNEL_DS);
2293 	emulate_load_store_insn(regs, (void __user *)regs->cp0_badvaddr, pc);
2294 	set_fs(seg);
2295 
2296 	return;
2297 
2298 sigbus:
2299 	die_if_kernel("Kernel unaligned instruction access", regs);
2300 	force_sig(SIGBUS, current);
2301 
2302 	/*
2303 	 * XXX On return from the signal handler we should advance the epc
2304 	 */
2305 	exception_exit(prev_state);
2306 }
2307 
2308 #ifdef CONFIG_DEBUG_FS
2309 static int __init debugfs_unaligned(void)
2310 {
2311 	struct dentry *d;
2312 
2313 	if (!mips_debugfs_dir)
2314 		return -ENODEV;
2315 	d = debugfs_create_u32("unaligned_instructions", S_IRUGO,
2316 			       mips_debugfs_dir, &unaligned_instructions);
2317 	if (!d)
2318 		return -ENOMEM;
2319 	d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR,
2320 			       mips_debugfs_dir, &unaligned_action);
2321 	if (!d)
2322 		return -ENOMEM;
2323 	return 0;
2324 }
2325 arch_initcall(debugfs_unaligned);
2326 #endif
2327