xref: /openbmc/linux/arch/mips/kernel/unaligned.c (revision 176f011b)
1 /*
2  * Handle unaligned accesses by emulation.
3  *
4  * This file is subject to the terms and conditions of the GNU General Public
5  * License.  See the file "COPYING" in the main directory of this archive
6  * for more details.
7  *
8  * Copyright (C) 1996, 1998, 1999, 2002 by Ralf Baechle
9  * Copyright (C) 1999 Silicon Graphics, Inc.
10  * Copyright (C) 2014 Imagination Technologies Ltd.
11  *
12  * This file contains exception handler for address error exception with the
13  * special capability to execute faulting instructions in software.  The
14  * handler does not try to handle the case when the program counter points
15  * to an address not aligned to a word boundary.
16  *
17  * Putting data to unaligned addresses is a bad practice even on Intel where
18  * only the performance is affected.  Much worse is that such code is non-
19  * portable.  Due to several programs that die on MIPS due to alignment
20  * problems I decided to implement this handler anyway though I originally
21  * didn't intend to do this at all for user code.
22  *
23  * For now I enable fixing of address errors by default to make life easier.
24  * I however intend to disable this somewhen in the future when the alignment
25  * problems with user programs have been fixed.	 For programmers this is the
26  * right way to go.
27  *
28  * Fixing address errors is a per process option.  The option is inherited
29  * across fork(2) and execve(2) calls.	If you really want to use the
30  * option in your user programs - I discourage the use of the software
31  * emulation strongly - use the following code in your userland stuff:
32  *
33  * #include <sys/sysmips.h>
34  *
35  * ...
36  * sysmips(MIPS_FIXADE, x);
37  * ...
38  *
39  * The argument x is 0 for disabling software emulation, enabled otherwise.
40  *
41  * Below a little program to play around with this feature.
42  *
43  * #include <stdio.h>
44  * #include <sys/sysmips.h>
45  *
46  * struct foo {
47  *	   unsigned char bar[8];
48  * };
49  *
50  * main(int argc, char *argv[])
51  * {
52  *	   struct foo x = {0, 1, 2, 3, 4, 5, 6, 7};
53  *	   unsigned int *p = (unsigned int *) (x.bar + 3);
54  *	   int i;
55  *
56  *	   if (argc > 1)
57  *		   sysmips(MIPS_FIXADE, atoi(argv[1]));
58  *
59  *	   printf("*p = %08lx\n", *p);
60  *
61  *	   *p = 0xdeadface;
62  *
63  *	   for(i = 0; i <= 7; i++)
64  *	   printf("%02x ", x.bar[i]);
65  *	   printf("\n");
66  * }
67  *
68  * Coprocessor loads are not supported; I think this case is unimportant
69  * in the practice.
70  *
71  * TODO: Handle ndc (attempted store to doubleword in uncached memory)
72  *	 exception for the R6000.
73  *	 A store crossing a page boundary might be executed only partially.
74  *	 Undo the partial store in this case.
75  */
76 #include <linux/context_tracking.h>
77 #include <linux/mm.h>
78 #include <linux/signal.h>
79 #include <linux/smp.h>
80 #include <linux/sched.h>
81 #include <linux/debugfs.h>
82 #include <linux/perf_event.h>
83 
84 #include <asm/asm.h>
85 #include <asm/branch.h>
86 #include <asm/byteorder.h>
87 #include <asm/cop2.h>
88 #include <asm/debug.h>
89 #include <asm/fpu.h>
90 #include <asm/fpu_emulator.h>
91 #include <asm/inst.h>
92 #include <linux/uaccess.h>
93 
94 #define STR(x)	__STR(x)
95 #define __STR(x)  #x
96 
97 enum {
98 	UNALIGNED_ACTION_QUIET,
99 	UNALIGNED_ACTION_SIGNAL,
100 	UNALIGNED_ACTION_SHOW,
101 };
102 #ifdef CONFIG_DEBUG_FS
103 static u32 unaligned_instructions;
104 static u32 unaligned_action;
105 #else
106 #define unaligned_action UNALIGNED_ACTION_QUIET
107 #endif
108 extern void show_registers(struct pt_regs *regs);
109 
110 #ifdef __BIG_ENDIAN
111 #define     _LoadHW(addr, value, res, type)  \
112 do {                                                        \
113 		__asm__ __volatile__ (".set\tnoat\n"        \
114 			"1:\t"type##_lb("%0", "0(%2)")"\n"  \
115 			"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
116 			"sll\t%0, 0x8\n\t"                  \
117 			"or\t%0, $1\n\t"                    \
118 			"li\t%1, 0\n"                       \
119 			"3:\t.set\tat\n\t"                  \
120 			".insn\n\t"                         \
121 			".section\t.fixup,\"ax\"\n\t"       \
122 			"4:\tli\t%1, %3\n\t"                \
123 			"j\t3b\n\t"                         \
124 			".previous\n\t"                     \
125 			".section\t__ex_table,\"a\"\n\t"    \
126 			STR(PTR)"\t1b, 4b\n\t"              \
127 			STR(PTR)"\t2b, 4b\n\t"              \
128 			".previous"                         \
129 			: "=&r" (value), "=r" (res)         \
130 			: "r" (addr), "i" (-EFAULT));       \
131 } while(0)
132 
133 #ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
134 #define     _LoadW(addr, value, res, type)   \
135 do {                                                        \
136 		__asm__ __volatile__ (                      \
137 			"1:\t"type##_lwl("%0", "(%2)")"\n"   \
138 			"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
139 			"li\t%1, 0\n"                       \
140 			"3:\n\t"                            \
141 			".insn\n\t"                         \
142 			".section\t.fixup,\"ax\"\n\t"       \
143 			"4:\tli\t%1, %3\n\t"                \
144 			"j\t3b\n\t"                         \
145 			".previous\n\t"                     \
146 			".section\t__ex_table,\"a\"\n\t"    \
147 			STR(PTR)"\t1b, 4b\n\t"              \
148 			STR(PTR)"\t2b, 4b\n\t"              \
149 			".previous"                         \
150 			: "=&r" (value), "=r" (res)         \
151 			: "r" (addr), "i" (-EFAULT));       \
152 } while(0)
153 
154 #else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
155 /* For CPUs without lwl instruction */
156 #define     _LoadW(addr, value, res, type) \
157 do {                                                        \
158 		__asm__ __volatile__ (			    \
159 			".set\tpush\n"			    \
160 			".set\tnoat\n\t"		    \
161 			"1:"type##_lb("%0", "0(%2)")"\n\t"  \
162 			"2:"type##_lbu("$1", "1(%2)")"\n\t" \
163 			"sll\t%0, 0x8\n\t"		    \
164 			"or\t%0, $1\n\t"		    \
165 			"3:"type##_lbu("$1", "2(%2)")"\n\t" \
166 			"sll\t%0, 0x8\n\t"		    \
167 			"or\t%0, $1\n\t"		    \
168 			"4:"type##_lbu("$1", "3(%2)")"\n\t" \
169 			"sll\t%0, 0x8\n\t"		    \
170 			"or\t%0, $1\n\t"		    \
171 			"li\t%1, 0\n"			    \
172 			".set\tpop\n"			    \
173 			"10:\n\t"			    \
174 			".insn\n\t"			    \
175 			".section\t.fixup,\"ax\"\n\t"	    \
176 			"11:\tli\t%1, %3\n\t"		    \
177 			"j\t10b\n\t"			    \
178 			".previous\n\t"			    \
179 			".section\t__ex_table,\"a\"\n\t"    \
180 			STR(PTR)"\t1b, 11b\n\t"		    \
181 			STR(PTR)"\t2b, 11b\n\t"		    \
182 			STR(PTR)"\t3b, 11b\n\t"		    \
183 			STR(PTR)"\t4b, 11b\n\t"		    \
184 			".previous"			    \
185 			: "=&r" (value), "=r" (res)	    \
186 			: "r" (addr), "i" (-EFAULT));       \
187 } while(0)
188 
189 #endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
190 
191 #define     _LoadHWU(addr, value, res, type) \
192 do {                                                        \
193 		__asm__ __volatile__ (                      \
194 			".set\tnoat\n"                      \
195 			"1:\t"type##_lbu("%0", "0(%2)")"\n" \
196 			"2:\t"type##_lbu("$1", "1(%2)")"\n\t"\
197 			"sll\t%0, 0x8\n\t"                  \
198 			"or\t%0, $1\n\t"                    \
199 			"li\t%1, 0\n"                       \
200 			"3:\n\t"                            \
201 			".insn\n\t"                         \
202 			".set\tat\n\t"                      \
203 			".section\t.fixup,\"ax\"\n\t"       \
204 			"4:\tli\t%1, %3\n\t"                \
205 			"j\t3b\n\t"                         \
206 			".previous\n\t"                     \
207 			".section\t__ex_table,\"a\"\n\t"    \
208 			STR(PTR)"\t1b, 4b\n\t"              \
209 			STR(PTR)"\t2b, 4b\n\t"              \
210 			".previous"                         \
211 			: "=&r" (value), "=r" (res)         \
212 			: "r" (addr), "i" (-EFAULT));       \
213 } while(0)
214 
215 #ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
216 #define     _LoadWU(addr, value, res, type)  \
217 do {                                                        \
218 		__asm__ __volatile__ (                      \
219 			"1:\t"type##_lwl("%0", "(%2)")"\n"  \
220 			"2:\t"type##_lwr("%0", "3(%2)")"\n\t"\
221 			"dsll\t%0, %0, 32\n\t"              \
222 			"dsrl\t%0, %0, 32\n\t"              \
223 			"li\t%1, 0\n"                       \
224 			"3:\n\t"                            \
225 			".insn\n\t"                         \
226 			"\t.section\t.fixup,\"ax\"\n\t"     \
227 			"4:\tli\t%1, %3\n\t"                \
228 			"j\t3b\n\t"                         \
229 			".previous\n\t"                     \
230 			".section\t__ex_table,\"a\"\n\t"    \
231 			STR(PTR)"\t1b, 4b\n\t"              \
232 			STR(PTR)"\t2b, 4b\n\t"              \
233 			".previous"                         \
234 			: "=&r" (value), "=r" (res)         \
235 			: "r" (addr), "i" (-EFAULT));       \
236 } while(0)
237 
238 #define     _LoadDW(addr, value, res)  \
239 do {                                                        \
240 		__asm__ __volatile__ (                      \
241 			"1:\tldl\t%0, (%2)\n"               \
242 			"2:\tldr\t%0, 7(%2)\n\t"            \
243 			"li\t%1, 0\n"                       \
244 			"3:\n\t"                            \
245 			".insn\n\t"                         \
246 			"\t.section\t.fixup,\"ax\"\n\t"     \
247 			"4:\tli\t%1, %3\n\t"                \
248 			"j\t3b\n\t"                         \
249 			".previous\n\t"                     \
250 			".section\t__ex_table,\"a\"\n\t"    \
251 			STR(PTR)"\t1b, 4b\n\t"              \
252 			STR(PTR)"\t2b, 4b\n\t"              \
253 			".previous"                         \
254 			: "=&r" (value), "=r" (res)         \
255 			: "r" (addr), "i" (-EFAULT));       \
256 } while(0)
257 
258 #else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
259 /* For CPUs without lwl and ldl instructions */
260 #define	    _LoadWU(addr, value, res, type) \
261 do {                                                        \
262 		__asm__ __volatile__ (			    \
263 			".set\tpush\n\t"		    \
264 			".set\tnoat\n\t"		    \
265 			"1:"type##_lbu("%0", "0(%2)")"\n\t" \
266 			"2:"type##_lbu("$1", "1(%2)")"\n\t" \
267 			"sll\t%0, 0x8\n\t"		    \
268 			"or\t%0, $1\n\t"		    \
269 			"3:"type##_lbu("$1", "2(%2)")"\n\t" \
270 			"sll\t%0, 0x8\n\t"		    \
271 			"or\t%0, $1\n\t"		    \
272 			"4:"type##_lbu("$1", "3(%2)")"\n\t" \
273 			"sll\t%0, 0x8\n\t"		    \
274 			"or\t%0, $1\n\t"		    \
275 			"li\t%1, 0\n"			    \
276 			".set\tpop\n"			    \
277 			"10:\n\t"			    \
278 			".insn\n\t"			    \
279 			".section\t.fixup,\"ax\"\n\t"	    \
280 			"11:\tli\t%1, %3\n\t"		    \
281 			"j\t10b\n\t"			    \
282 			".previous\n\t"			    \
283 			".section\t__ex_table,\"a\"\n\t"    \
284 			STR(PTR)"\t1b, 11b\n\t"		    \
285 			STR(PTR)"\t2b, 11b\n\t"		    \
286 			STR(PTR)"\t3b, 11b\n\t"		    \
287 			STR(PTR)"\t4b, 11b\n\t"		    \
288 			".previous"			    \
289 			: "=&r" (value), "=r" (res)	    \
290 			: "r" (addr), "i" (-EFAULT));       \
291 } while(0)
292 
293 #define     _LoadDW(addr, value, res)  \
294 do {                                                        \
295 		__asm__ __volatile__ (			    \
296 			".set\tpush\n\t"		    \
297 			".set\tnoat\n\t"		    \
298 			"1:lb\t%0, 0(%2)\n\t"    	    \
299 			"2:lbu\t $1, 1(%2)\n\t"   	    \
300 			"dsll\t%0, 0x8\n\t"		    \
301 			"or\t%0, $1\n\t"		    \
302 			"3:lbu\t$1, 2(%2)\n\t"   	    \
303 			"dsll\t%0, 0x8\n\t"		    \
304 			"or\t%0, $1\n\t"		    \
305 			"4:lbu\t$1, 3(%2)\n\t"   	    \
306 			"dsll\t%0, 0x8\n\t"		    \
307 			"or\t%0, $1\n\t"		    \
308 			"5:lbu\t$1, 4(%2)\n\t"   	    \
309 			"dsll\t%0, 0x8\n\t"		    \
310 			"or\t%0, $1\n\t"		    \
311 			"6:lbu\t$1, 5(%2)\n\t"   	    \
312 			"dsll\t%0, 0x8\n\t"		    \
313 			"or\t%0, $1\n\t"		    \
314 			"7:lbu\t$1, 6(%2)\n\t"   	    \
315 			"dsll\t%0, 0x8\n\t"		    \
316 			"or\t%0, $1\n\t"		    \
317 			"8:lbu\t$1, 7(%2)\n\t"   	    \
318 			"dsll\t%0, 0x8\n\t"		    \
319 			"or\t%0, $1\n\t"		    \
320 			"li\t%1, 0\n"			    \
321 			".set\tpop\n\t"			    \
322 			"10:\n\t"			    \
323 			".insn\n\t"			    \
324 			".section\t.fixup,\"ax\"\n\t"	    \
325 			"11:\tli\t%1, %3\n\t"		    \
326 			"j\t10b\n\t"			    \
327 			".previous\n\t"			    \
328 			".section\t__ex_table,\"a\"\n\t"    \
329 			STR(PTR)"\t1b, 11b\n\t"		    \
330 			STR(PTR)"\t2b, 11b\n\t"		    \
331 			STR(PTR)"\t3b, 11b\n\t"		    \
332 			STR(PTR)"\t4b, 11b\n\t"		    \
333 			STR(PTR)"\t5b, 11b\n\t"		    \
334 			STR(PTR)"\t6b, 11b\n\t"		    \
335 			STR(PTR)"\t7b, 11b\n\t"		    \
336 			STR(PTR)"\t8b, 11b\n\t"		    \
337 			".previous"			    \
338 			: "=&r" (value), "=r" (res)	    \
339 			: "r" (addr), "i" (-EFAULT));       \
340 } while(0)
341 
342 #endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
343 
344 
345 #define     _StoreHW(addr, value, res, type) \
346 do {                                                        \
347 		__asm__ __volatile__ (                      \
348 			".set\tnoat\n"                      \
349 			"1:\t"type##_sb("%1", "1(%2)")"\n"  \
350 			"srl\t$1, %1, 0x8\n"                \
351 			"2:\t"type##_sb("$1", "0(%2)")"\n"  \
352 			".set\tat\n\t"                      \
353 			"li\t%0, 0\n"                       \
354 			"3:\n\t"                            \
355 			".insn\n\t"                         \
356 			".section\t.fixup,\"ax\"\n\t"       \
357 			"4:\tli\t%0, %3\n\t"                \
358 			"j\t3b\n\t"                         \
359 			".previous\n\t"                     \
360 			".section\t__ex_table,\"a\"\n\t"    \
361 			STR(PTR)"\t1b, 4b\n\t"              \
362 			STR(PTR)"\t2b, 4b\n\t"              \
363 			".previous"                         \
364 			: "=r" (res)                        \
365 			: "r" (value), "r" (addr), "i" (-EFAULT));\
366 } while(0)
367 
368 #ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
369 #define     _StoreW(addr, value, res, type)  \
370 do {                                                        \
371 		__asm__ __volatile__ (                      \
372 			"1:\t"type##_swl("%1", "(%2)")"\n"  \
373 			"2:\t"type##_swr("%1", "3(%2)")"\n\t"\
374 			"li\t%0, 0\n"                       \
375 			"3:\n\t"                            \
376 			".insn\n\t"                         \
377 			".section\t.fixup,\"ax\"\n\t"       \
378 			"4:\tli\t%0, %3\n\t"                \
379 			"j\t3b\n\t"                         \
380 			".previous\n\t"                     \
381 			".section\t__ex_table,\"a\"\n\t"    \
382 			STR(PTR)"\t1b, 4b\n\t"              \
383 			STR(PTR)"\t2b, 4b\n\t"              \
384 			".previous"                         \
385 		: "=r" (res)                                \
386 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
387 } while(0)
388 
389 #define     _StoreDW(addr, value, res) \
390 do {                                                        \
391 		__asm__ __volatile__ (                      \
392 			"1:\tsdl\t%1,(%2)\n"                \
393 			"2:\tsdr\t%1, 7(%2)\n\t"            \
394 			"li\t%0, 0\n"                       \
395 			"3:\n\t"                            \
396 			".insn\n\t"                         \
397 			".section\t.fixup,\"ax\"\n\t"       \
398 			"4:\tli\t%0, %3\n\t"                \
399 			"j\t3b\n\t"                         \
400 			".previous\n\t"                     \
401 			".section\t__ex_table,\"a\"\n\t"    \
402 			STR(PTR)"\t1b, 4b\n\t"              \
403 			STR(PTR)"\t2b, 4b\n\t"              \
404 			".previous"                         \
405 		: "=r" (res)                                \
406 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
407 } while(0)
408 
409 #else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
410 #define     _StoreW(addr, value, res, type)  \
411 do {                                                        \
412 		__asm__ __volatile__ (                      \
413 			".set\tpush\n\t"		    \
414 			".set\tnoat\n\t"		    \
415 			"1:"type##_sb("%1", "3(%2)")"\n\t"  \
416 			"srl\t$1, %1, 0x8\n\t"		    \
417 			"2:"type##_sb("$1", "2(%2)")"\n\t"  \
418 			"srl\t$1, $1,  0x8\n\t"		    \
419 			"3:"type##_sb("$1", "1(%2)")"\n\t"  \
420 			"srl\t$1, $1, 0x8\n\t"		    \
421 			"4:"type##_sb("$1", "0(%2)")"\n\t"  \
422 			".set\tpop\n\t"			    \
423 			"li\t%0, 0\n"			    \
424 			"10:\n\t"			    \
425 			".insn\n\t"			    \
426 			".section\t.fixup,\"ax\"\n\t"	    \
427 			"11:\tli\t%0, %3\n\t"		    \
428 			"j\t10b\n\t"			    \
429 			".previous\n\t"			    \
430 			".section\t__ex_table,\"a\"\n\t"    \
431 			STR(PTR)"\t1b, 11b\n\t"		    \
432 			STR(PTR)"\t2b, 11b\n\t"		    \
433 			STR(PTR)"\t3b, 11b\n\t"		    \
434 			STR(PTR)"\t4b, 11b\n\t"		    \
435 			".previous"			    \
436 		: "=&r" (res)			    	    \
437 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
438 		: "memory");                                \
439 } while(0)
440 
441 #define     _StoreDW(addr, value, res) \
442 do {                                                        \
443 		__asm__ __volatile__ (                      \
444 			".set\tpush\n\t"		    \
445 			".set\tnoat\n\t"		    \
446 			"1:sb\t%1, 7(%2)\n\t"    	    \
447 			"dsrl\t$1, %1, 0x8\n\t"		    \
448 			"2:sb\t$1, 6(%2)\n\t"    	    \
449 			"dsrl\t$1, $1, 0x8\n\t"		    \
450 			"3:sb\t$1, 5(%2)\n\t"    	    \
451 			"dsrl\t$1, $1, 0x8\n\t"		    \
452 			"4:sb\t$1, 4(%2)\n\t"    	    \
453 			"dsrl\t$1, $1, 0x8\n\t"		    \
454 			"5:sb\t$1, 3(%2)\n\t"    	    \
455 			"dsrl\t$1, $1, 0x8\n\t"		    \
456 			"6:sb\t$1, 2(%2)\n\t"    	    \
457 			"dsrl\t$1, $1, 0x8\n\t"		    \
458 			"7:sb\t$1, 1(%2)\n\t"    	    \
459 			"dsrl\t$1, $1, 0x8\n\t"		    \
460 			"8:sb\t$1, 0(%2)\n\t"    	    \
461 			"dsrl\t$1, $1, 0x8\n\t"		    \
462 			".set\tpop\n\t"			    \
463 			"li\t%0, 0\n"			    \
464 			"10:\n\t"			    \
465 			".insn\n\t"			    \
466 			".section\t.fixup,\"ax\"\n\t"	    \
467 			"11:\tli\t%0, %3\n\t"		    \
468 			"j\t10b\n\t"			    \
469 			".previous\n\t"			    \
470 			".section\t__ex_table,\"a\"\n\t"    \
471 			STR(PTR)"\t1b, 11b\n\t"		    \
472 			STR(PTR)"\t2b, 11b\n\t"		    \
473 			STR(PTR)"\t3b, 11b\n\t"		    \
474 			STR(PTR)"\t4b, 11b\n\t"		    \
475 			STR(PTR)"\t5b, 11b\n\t"		    \
476 			STR(PTR)"\t6b, 11b\n\t"		    \
477 			STR(PTR)"\t7b, 11b\n\t"		    \
478 			STR(PTR)"\t8b, 11b\n\t"		    \
479 			".previous"			    \
480 		: "=&r" (res)			    	    \
481 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
482 		: "memory");                                \
483 } while(0)
484 
485 #endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
486 
487 #else /* __BIG_ENDIAN */
488 
489 #define     _LoadHW(addr, value, res, type)  \
490 do {                                                        \
491 		__asm__ __volatile__ (".set\tnoat\n"        \
492 			"1:\t"type##_lb("%0", "1(%2)")"\n"  \
493 			"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
494 			"sll\t%0, 0x8\n\t"                  \
495 			"or\t%0, $1\n\t"                    \
496 			"li\t%1, 0\n"                       \
497 			"3:\t.set\tat\n\t"                  \
498 			".insn\n\t"                         \
499 			".section\t.fixup,\"ax\"\n\t"       \
500 			"4:\tli\t%1, %3\n\t"                \
501 			"j\t3b\n\t"                         \
502 			".previous\n\t"                     \
503 			".section\t__ex_table,\"a\"\n\t"    \
504 			STR(PTR)"\t1b, 4b\n\t"              \
505 			STR(PTR)"\t2b, 4b\n\t"              \
506 			".previous"                         \
507 			: "=&r" (value), "=r" (res)         \
508 			: "r" (addr), "i" (-EFAULT));       \
509 } while(0)
510 
511 #ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
512 #define     _LoadW(addr, value, res, type)   \
513 do {                                                        \
514 		__asm__ __volatile__ (                      \
515 			"1:\t"type##_lwl("%0", "3(%2)")"\n" \
516 			"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
517 			"li\t%1, 0\n"                       \
518 			"3:\n\t"                            \
519 			".insn\n\t"                         \
520 			".section\t.fixup,\"ax\"\n\t"       \
521 			"4:\tli\t%1, %3\n\t"                \
522 			"j\t3b\n\t"                         \
523 			".previous\n\t"                     \
524 			".section\t__ex_table,\"a\"\n\t"    \
525 			STR(PTR)"\t1b, 4b\n\t"              \
526 			STR(PTR)"\t2b, 4b\n\t"              \
527 			".previous"                         \
528 			: "=&r" (value), "=r" (res)         \
529 			: "r" (addr), "i" (-EFAULT));       \
530 } while(0)
531 
532 #else  /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
533 /* For CPUs without lwl instruction */
534 #define     _LoadW(addr, value, res, type) \
535 do {                                                        \
536 		__asm__ __volatile__ (			    \
537 			".set\tpush\n"			    \
538 			".set\tnoat\n\t"		    \
539 			"1:"type##_lb("%0", "3(%2)")"\n\t"  \
540 			"2:"type##_lbu("$1", "2(%2)")"\n\t" \
541 			"sll\t%0, 0x8\n\t"		    \
542 			"or\t%0, $1\n\t"		    \
543 			"3:"type##_lbu("$1", "1(%2)")"\n\t" \
544 			"sll\t%0, 0x8\n\t"		    \
545 			"or\t%0, $1\n\t"		    \
546 			"4:"type##_lbu("$1", "0(%2)")"\n\t" \
547 			"sll\t%0, 0x8\n\t"		    \
548 			"or\t%0, $1\n\t"		    \
549 			"li\t%1, 0\n"			    \
550 			".set\tpop\n"			    \
551 			"10:\n\t"			    \
552 			".insn\n\t"			    \
553 			".section\t.fixup,\"ax\"\n\t"	    \
554 			"11:\tli\t%1, %3\n\t"		    \
555 			"j\t10b\n\t"			    \
556 			".previous\n\t"			    \
557 			".section\t__ex_table,\"a\"\n\t"    \
558 			STR(PTR)"\t1b, 11b\n\t"		    \
559 			STR(PTR)"\t2b, 11b\n\t"		    \
560 			STR(PTR)"\t3b, 11b\n\t"		    \
561 			STR(PTR)"\t4b, 11b\n\t"		    \
562 			".previous"			    \
563 			: "=&r" (value), "=r" (res)	    \
564 			: "r" (addr), "i" (-EFAULT));       \
565 } while(0)
566 
567 #endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
568 
569 
570 #define     _LoadHWU(addr, value, res, type) \
571 do {                                                        \
572 		__asm__ __volatile__ (                      \
573 			".set\tnoat\n"                      \
574 			"1:\t"type##_lbu("%0", "1(%2)")"\n" \
575 			"2:\t"type##_lbu("$1", "0(%2)")"\n\t"\
576 			"sll\t%0, 0x8\n\t"                  \
577 			"or\t%0, $1\n\t"                    \
578 			"li\t%1, 0\n"                       \
579 			"3:\n\t"                            \
580 			".insn\n\t"                         \
581 			".set\tat\n\t"                      \
582 			".section\t.fixup,\"ax\"\n\t"       \
583 			"4:\tli\t%1, %3\n\t"                \
584 			"j\t3b\n\t"                         \
585 			".previous\n\t"                     \
586 			".section\t__ex_table,\"a\"\n\t"    \
587 			STR(PTR)"\t1b, 4b\n\t"              \
588 			STR(PTR)"\t2b, 4b\n\t"              \
589 			".previous"                         \
590 			: "=&r" (value), "=r" (res)         \
591 			: "r" (addr), "i" (-EFAULT));       \
592 } while(0)
593 
594 #ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
595 #define     _LoadWU(addr, value, res, type)  \
596 do {                                                        \
597 		__asm__ __volatile__ (                      \
598 			"1:\t"type##_lwl("%0", "3(%2)")"\n" \
599 			"2:\t"type##_lwr("%0", "(%2)")"\n\t"\
600 			"dsll\t%0, %0, 32\n\t"              \
601 			"dsrl\t%0, %0, 32\n\t"              \
602 			"li\t%1, 0\n"                       \
603 			"3:\n\t"                            \
604 			".insn\n\t"                         \
605 			"\t.section\t.fixup,\"ax\"\n\t"     \
606 			"4:\tli\t%1, %3\n\t"                \
607 			"j\t3b\n\t"                         \
608 			".previous\n\t"                     \
609 			".section\t__ex_table,\"a\"\n\t"    \
610 			STR(PTR)"\t1b, 4b\n\t"              \
611 			STR(PTR)"\t2b, 4b\n\t"              \
612 			".previous"                         \
613 			: "=&r" (value), "=r" (res)         \
614 			: "r" (addr), "i" (-EFAULT));       \
615 } while(0)
616 
617 #define     _LoadDW(addr, value, res)  \
618 do {                                                        \
619 		__asm__ __volatile__ (                      \
620 			"1:\tldl\t%0, 7(%2)\n"              \
621 			"2:\tldr\t%0, (%2)\n\t"             \
622 			"li\t%1, 0\n"                       \
623 			"3:\n\t"                            \
624 			".insn\n\t"                         \
625 			"\t.section\t.fixup,\"ax\"\n\t"     \
626 			"4:\tli\t%1, %3\n\t"                \
627 			"j\t3b\n\t"                         \
628 			".previous\n\t"                     \
629 			".section\t__ex_table,\"a\"\n\t"    \
630 			STR(PTR)"\t1b, 4b\n\t"              \
631 			STR(PTR)"\t2b, 4b\n\t"              \
632 			".previous"                         \
633 			: "=&r" (value), "=r" (res)         \
634 			: "r" (addr), "i" (-EFAULT));       \
635 } while(0)
636 
637 #else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
638 /* For CPUs without lwl and ldl instructions */
639 #define	    _LoadWU(addr, value, res, type) \
640 do {                                                        \
641 		__asm__ __volatile__ (			    \
642 			".set\tpush\n\t"		    \
643 			".set\tnoat\n\t"		    \
644 			"1:"type##_lbu("%0", "3(%2)")"\n\t" \
645 			"2:"type##_lbu("$1", "2(%2)")"\n\t" \
646 			"sll\t%0, 0x8\n\t"		    \
647 			"or\t%0, $1\n\t"		    \
648 			"3:"type##_lbu("$1", "1(%2)")"\n\t" \
649 			"sll\t%0, 0x8\n\t"		    \
650 			"or\t%0, $1\n\t"		    \
651 			"4:"type##_lbu("$1", "0(%2)")"\n\t" \
652 			"sll\t%0, 0x8\n\t"		    \
653 			"or\t%0, $1\n\t"		    \
654 			"li\t%1, 0\n"			    \
655 			".set\tpop\n"			    \
656 			"10:\n\t"			    \
657 			".insn\n\t"			    \
658 			".section\t.fixup,\"ax\"\n\t"	    \
659 			"11:\tli\t%1, %3\n\t"		    \
660 			"j\t10b\n\t"			    \
661 			".previous\n\t"			    \
662 			".section\t__ex_table,\"a\"\n\t"    \
663 			STR(PTR)"\t1b, 11b\n\t"		    \
664 			STR(PTR)"\t2b, 11b\n\t"		    \
665 			STR(PTR)"\t3b, 11b\n\t"		    \
666 			STR(PTR)"\t4b, 11b\n\t"		    \
667 			".previous"			    \
668 			: "=&r" (value), "=r" (res)	    \
669 			: "r" (addr), "i" (-EFAULT));       \
670 } while(0)
671 
672 #define     _LoadDW(addr, value, res)  \
673 do {                                                        \
674 		__asm__ __volatile__ (			    \
675 			".set\tpush\n\t"		    \
676 			".set\tnoat\n\t"		    \
677 			"1:lb\t%0, 7(%2)\n\t"    	    \
678 			"2:lbu\t$1, 6(%2)\n\t"   	    \
679 			"dsll\t%0, 0x8\n\t"		    \
680 			"or\t%0, $1\n\t"		    \
681 			"3:lbu\t$1, 5(%2)\n\t"   	    \
682 			"dsll\t%0, 0x8\n\t"		    \
683 			"or\t%0, $1\n\t"		    \
684 			"4:lbu\t$1, 4(%2)\n\t"   	    \
685 			"dsll\t%0, 0x8\n\t"		    \
686 			"or\t%0, $1\n\t"		    \
687 			"5:lbu\t$1, 3(%2)\n\t"   	    \
688 			"dsll\t%0, 0x8\n\t"		    \
689 			"or\t%0, $1\n\t"		    \
690 			"6:lbu\t$1, 2(%2)\n\t"   	    \
691 			"dsll\t%0, 0x8\n\t"		    \
692 			"or\t%0, $1\n\t"		    \
693 			"7:lbu\t$1, 1(%2)\n\t"   	    \
694 			"dsll\t%0, 0x8\n\t"		    \
695 			"or\t%0, $1\n\t"		    \
696 			"8:lbu\t$1, 0(%2)\n\t"   	    \
697 			"dsll\t%0, 0x8\n\t"		    \
698 			"or\t%0, $1\n\t"		    \
699 			"li\t%1, 0\n"			    \
700 			".set\tpop\n\t"			    \
701 			"10:\n\t"			    \
702 			".insn\n\t"			    \
703 			".section\t.fixup,\"ax\"\n\t"	    \
704 			"11:\tli\t%1, %3\n\t"		    \
705 			"j\t10b\n\t"			    \
706 			".previous\n\t"			    \
707 			".section\t__ex_table,\"a\"\n\t"    \
708 			STR(PTR)"\t1b, 11b\n\t"		    \
709 			STR(PTR)"\t2b, 11b\n\t"		    \
710 			STR(PTR)"\t3b, 11b\n\t"		    \
711 			STR(PTR)"\t4b, 11b\n\t"		    \
712 			STR(PTR)"\t5b, 11b\n\t"		    \
713 			STR(PTR)"\t6b, 11b\n\t"		    \
714 			STR(PTR)"\t7b, 11b\n\t"		    \
715 			STR(PTR)"\t8b, 11b\n\t"		    \
716 			".previous"			    \
717 			: "=&r" (value), "=r" (res)	    \
718 			: "r" (addr), "i" (-EFAULT));       \
719 } while(0)
720 #endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
721 
722 #define     _StoreHW(addr, value, res, type) \
723 do {                                                        \
724 		__asm__ __volatile__ (                      \
725 			".set\tnoat\n"                      \
726 			"1:\t"type##_sb("%1", "0(%2)")"\n"  \
727 			"srl\t$1,%1, 0x8\n"                 \
728 			"2:\t"type##_sb("$1", "1(%2)")"\n"  \
729 			".set\tat\n\t"                      \
730 			"li\t%0, 0\n"                       \
731 			"3:\n\t"                            \
732 			".insn\n\t"                         \
733 			".section\t.fixup,\"ax\"\n\t"       \
734 			"4:\tli\t%0, %3\n\t"                \
735 			"j\t3b\n\t"                         \
736 			".previous\n\t"                     \
737 			".section\t__ex_table,\"a\"\n\t"    \
738 			STR(PTR)"\t1b, 4b\n\t"              \
739 			STR(PTR)"\t2b, 4b\n\t"              \
740 			".previous"                         \
741 			: "=r" (res)                        \
742 			: "r" (value), "r" (addr), "i" (-EFAULT));\
743 } while(0)
744 
745 #ifdef CONFIG_CPU_HAS_LOAD_STORE_LR
746 #define     _StoreW(addr, value, res, type)  \
747 do {                                                        \
748 		__asm__ __volatile__ (                      \
749 			"1:\t"type##_swl("%1", "3(%2)")"\n" \
750 			"2:\t"type##_swr("%1", "(%2)")"\n\t"\
751 			"li\t%0, 0\n"                       \
752 			"3:\n\t"                            \
753 			".insn\n\t"                         \
754 			".section\t.fixup,\"ax\"\n\t"       \
755 			"4:\tli\t%0, %3\n\t"                \
756 			"j\t3b\n\t"                         \
757 			".previous\n\t"                     \
758 			".section\t__ex_table,\"a\"\n\t"    \
759 			STR(PTR)"\t1b, 4b\n\t"              \
760 			STR(PTR)"\t2b, 4b\n\t"              \
761 			".previous"                         \
762 		: "=r" (res)                                \
763 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
764 } while(0)
765 
766 #define     _StoreDW(addr, value, res) \
767 do {                                                        \
768 		__asm__ __volatile__ (                      \
769 			"1:\tsdl\t%1, 7(%2)\n"              \
770 			"2:\tsdr\t%1, (%2)\n\t"             \
771 			"li\t%0, 0\n"                       \
772 			"3:\n\t"                            \
773 			".insn\n\t"                         \
774 			".section\t.fixup,\"ax\"\n\t"       \
775 			"4:\tli\t%0, %3\n\t"                \
776 			"j\t3b\n\t"                         \
777 			".previous\n\t"                     \
778 			".section\t__ex_table,\"a\"\n\t"    \
779 			STR(PTR)"\t1b, 4b\n\t"              \
780 			STR(PTR)"\t2b, 4b\n\t"              \
781 			".previous"                         \
782 		: "=r" (res)                                \
783 		: "r" (value), "r" (addr), "i" (-EFAULT));  \
784 } while(0)
785 
786 #else /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
787 /* For CPUs without swl and sdl instructions */
788 #define     _StoreW(addr, value, res, type)  \
789 do {                                                        \
790 		__asm__ __volatile__ (                      \
791 			".set\tpush\n\t"		    \
792 			".set\tnoat\n\t"		    \
793 			"1:"type##_sb("%1", "0(%2)")"\n\t"  \
794 			"srl\t$1, %1, 0x8\n\t"		    \
795 			"2:"type##_sb("$1", "1(%2)")"\n\t"  \
796 			"srl\t$1, $1,  0x8\n\t"		    \
797 			"3:"type##_sb("$1", "2(%2)")"\n\t"  \
798 			"srl\t$1, $1, 0x8\n\t"		    \
799 			"4:"type##_sb("$1", "3(%2)")"\n\t"  \
800 			".set\tpop\n\t"			    \
801 			"li\t%0, 0\n"			    \
802 			"10:\n\t"			    \
803 			".insn\n\t"			    \
804 			".section\t.fixup,\"ax\"\n\t"	    \
805 			"11:\tli\t%0, %3\n\t"		    \
806 			"j\t10b\n\t"			    \
807 			".previous\n\t"			    \
808 			".section\t__ex_table,\"a\"\n\t"    \
809 			STR(PTR)"\t1b, 11b\n\t"		    \
810 			STR(PTR)"\t2b, 11b\n\t"		    \
811 			STR(PTR)"\t3b, 11b\n\t"		    \
812 			STR(PTR)"\t4b, 11b\n\t"		    \
813 			".previous"			    \
814 		: "=&r" (res)			    	    \
815 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
816 		: "memory");                                \
817 } while(0)
818 
819 #define     _StoreDW(addr, value, res) \
820 do {                                                        \
821 		__asm__ __volatile__ (                      \
822 			".set\tpush\n\t"		    \
823 			".set\tnoat\n\t"		    \
824 			"1:sb\t%1, 0(%2)\n\t"    	    \
825 			"dsrl\t$1, %1, 0x8\n\t"		    \
826 			"2:sb\t$1, 1(%2)\n\t"    	    \
827 			"dsrl\t$1, $1, 0x8\n\t"		    \
828 			"3:sb\t$1, 2(%2)\n\t"    	    \
829 			"dsrl\t$1, $1, 0x8\n\t"		    \
830 			"4:sb\t$1, 3(%2)\n\t"    	    \
831 			"dsrl\t$1, $1, 0x8\n\t"		    \
832 			"5:sb\t$1, 4(%2)\n\t"    	    \
833 			"dsrl\t$1, $1, 0x8\n\t"		    \
834 			"6:sb\t$1, 5(%2)\n\t"    	    \
835 			"dsrl\t$1, $1, 0x8\n\t"		    \
836 			"7:sb\t$1, 6(%2)\n\t"    	    \
837 			"dsrl\t$1, $1, 0x8\n\t"		    \
838 			"8:sb\t$1, 7(%2)\n\t"    	    \
839 			"dsrl\t$1, $1, 0x8\n\t"		    \
840 			".set\tpop\n\t"			    \
841 			"li\t%0, 0\n"			    \
842 			"10:\n\t"			    \
843 			".insn\n\t"			    \
844 			".section\t.fixup,\"ax\"\n\t"	    \
845 			"11:\tli\t%0, %3\n\t"		    \
846 			"j\t10b\n\t"			    \
847 			".previous\n\t"			    \
848 			".section\t__ex_table,\"a\"\n\t"    \
849 			STR(PTR)"\t1b, 11b\n\t"		    \
850 			STR(PTR)"\t2b, 11b\n\t"		    \
851 			STR(PTR)"\t3b, 11b\n\t"		    \
852 			STR(PTR)"\t4b, 11b\n\t"		    \
853 			STR(PTR)"\t5b, 11b\n\t"		    \
854 			STR(PTR)"\t6b, 11b\n\t"		    \
855 			STR(PTR)"\t7b, 11b\n\t"		    \
856 			STR(PTR)"\t8b, 11b\n\t"		    \
857 			".previous"			    \
858 		: "=&r" (res)			    	    \
859 		: "r" (value), "r" (addr), "i" (-EFAULT)    \
860 		: "memory");                                \
861 } while(0)
862 
863 #endif /* !CONFIG_CPU_HAS_LOAD_STORE_LR */
864 #endif
865 
866 #define LoadHWU(addr, value, res)	_LoadHWU(addr, value, res, kernel)
867 #define LoadHWUE(addr, value, res)	_LoadHWU(addr, value, res, user)
868 #define LoadWU(addr, value, res)	_LoadWU(addr, value, res, kernel)
869 #define LoadWUE(addr, value, res)	_LoadWU(addr, value, res, user)
870 #define LoadHW(addr, value, res)	_LoadHW(addr, value, res, kernel)
871 #define LoadHWE(addr, value, res)	_LoadHW(addr, value, res, user)
872 #define LoadW(addr, value, res)		_LoadW(addr, value, res, kernel)
873 #define LoadWE(addr, value, res)	_LoadW(addr, value, res, user)
874 #define LoadDW(addr, value, res)	_LoadDW(addr, value, res)
875 
876 #define StoreHW(addr, value, res)	_StoreHW(addr, value, res, kernel)
877 #define StoreHWE(addr, value, res)	_StoreHW(addr, value, res, user)
878 #define StoreW(addr, value, res)	_StoreW(addr, value, res, kernel)
879 #define StoreWE(addr, value, res)	_StoreW(addr, value, res, user)
880 #define StoreDW(addr, value, res)	_StoreDW(addr, value, res)
881 
882 static void emulate_load_store_insn(struct pt_regs *regs,
883 	void __user *addr, unsigned int __user *pc)
884 {
885 	unsigned long origpc, orig31, value;
886 	union mips_instruction insn;
887 	unsigned int res;
888 #ifdef	CONFIG_EVA
889 	mm_segment_t seg;
890 #endif
891 	origpc = (unsigned long)pc;
892 	orig31 = regs->regs[31];
893 
894 	perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, 0);
895 
896 	/*
897 	 * This load never faults.
898 	 */
899 	__get_user(insn.word, pc);
900 
901 	switch (insn.i_format.opcode) {
902 		/*
903 		 * These are instructions that a compiler doesn't generate.  We
904 		 * can assume therefore that the code is MIPS-aware and
905 		 * really buggy.  Emulating these instructions would break the
906 		 * semantics anyway.
907 		 */
908 	case ll_op:
909 	case lld_op:
910 	case sc_op:
911 	case scd_op:
912 
913 		/*
914 		 * For these instructions the only way to create an address
915 		 * error is an attempted access to kernel/supervisor address
916 		 * space.
917 		 */
918 	case ldl_op:
919 	case ldr_op:
920 	case lwl_op:
921 	case lwr_op:
922 	case sdl_op:
923 	case sdr_op:
924 	case swl_op:
925 	case swr_op:
926 	case lb_op:
927 	case lbu_op:
928 	case sb_op:
929 		goto sigbus;
930 
931 		/*
932 		 * The remaining opcodes are the ones that are really of
933 		 * interest.
934 		 */
935 	case spec3_op:
936 		if (insn.dsp_format.func == lx_op) {
937 			switch (insn.dsp_format.op) {
938 			case lwx_op:
939 				if (!access_ok(addr, 4))
940 					goto sigbus;
941 				LoadW(addr, value, res);
942 				if (res)
943 					goto fault;
944 				compute_return_epc(regs);
945 				regs->regs[insn.dsp_format.rd] = value;
946 				break;
947 			case lhx_op:
948 				if (!access_ok(addr, 2))
949 					goto sigbus;
950 				LoadHW(addr, value, res);
951 				if (res)
952 					goto fault;
953 				compute_return_epc(regs);
954 				regs->regs[insn.dsp_format.rd] = value;
955 				break;
956 			default:
957 				goto sigill;
958 			}
959 		}
960 #ifdef CONFIG_EVA
961 		else {
962 			/*
963 			 * we can land here only from kernel accessing user
964 			 * memory, so we need to "switch" the address limit to
965 			 * user space, so that address check can work properly.
966 			 */
967 			seg = get_fs();
968 			set_fs(USER_DS);
969 			switch (insn.spec3_format.func) {
970 			case lhe_op:
971 				if (!access_ok(addr, 2)) {
972 					set_fs(seg);
973 					goto sigbus;
974 				}
975 				LoadHWE(addr, value, res);
976 				if (res) {
977 					set_fs(seg);
978 					goto fault;
979 				}
980 				compute_return_epc(regs);
981 				regs->regs[insn.spec3_format.rt] = value;
982 				break;
983 			case lwe_op:
984 				if (!access_ok(addr, 4)) {
985 					set_fs(seg);
986 					goto sigbus;
987 				}
988 				LoadWE(addr, value, res);
989 				if (res) {
990 					set_fs(seg);
991 					goto fault;
992 				}
993 				compute_return_epc(regs);
994 				regs->regs[insn.spec3_format.rt] = value;
995 				break;
996 			case lhue_op:
997 				if (!access_ok(addr, 2)) {
998 					set_fs(seg);
999 					goto sigbus;
1000 				}
1001 				LoadHWUE(addr, value, res);
1002 				if (res) {
1003 					set_fs(seg);
1004 					goto fault;
1005 				}
1006 				compute_return_epc(regs);
1007 				regs->regs[insn.spec3_format.rt] = value;
1008 				break;
1009 			case she_op:
1010 				if (!access_ok(addr, 2)) {
1011 					set_fs(seg);
1012 					goto sigbus;
1013 				}
1014 				compute_return_epc(regs);
1015 				value = regs->regs[insn.spec3_format.rt];
1016 				StoreHWE(addr, value, res);
1017 				if (res) {
1018 					set_fs(seg);
1019 					goto fault;
1020 				}
1021 				break;
1022 			case swe_op:
1023 				if (!access_ok(addr, 4)) {
1024 					set_fs(seg);
1025 					goto sigbus;
1026 				}
1027 				compute_return_epc(regs);
1028 				value = regs->regs[insn.spec3_format.rt];
1029 				StoreWE(addr, value, res);
1030 				if (res) {
1031 					set_fs(seg);
1032 					goto fault;
1033 				}
1034 				break;
1035 			default:
1036 				set_fs(seg);
1037 				goto sigill;
1038 			}
1039 			set_fs(seg);
1040 		}
1041 #endif
1042 		break;
1043 	case lh_op:
1044 		if (!access_ok(addr, 2))
1045 			goto sigbus;
1046 
1047 		if (IS_ENABLED(CONFIG_EVA)) {
1048 			if (uaccess_kernel())
1049 				LoadHW(addr, value, res);
1050 			else
1051 				LoadHWE(addr, value, res);
1052 		} else {
1053 			LoadHW(addr, value, res);
1054 		}
1055 
1056 		if (res)
1057 			goto fault;
1058 		compute_return_epc(regs);
1059 		regs->regs[insn.i_format.rt] = value;
1060 		break;
1061 
1062 	case lw_op:
1063 		if (!access_ok(addr, 4))
1064 			goto sigbus;
1065 
1066 		if (IS_ENABLED(CONFIG_EVA)) {
1067 			if (uaccess_kernel())
1068 				LoadW(addr, value, res);
1069 			else
1070 				LoadWE(addr, value, res);
1071 		} else {
1072 			LoadW(addr, value, res);
1073 		}
1074 
1075 		if (res)
1076 			goto fault;
1077 		compute_return_epc(regs);
1078 		regs->regs[insn.i_format.rt] = value;
1079 		break;
1080 
1081 	case lhu_op:
1082 		if (!access_ok(addr, 2))
1083 			goto sigbus;
1084 
1085 		if (IS_ENABLED(CONFIG_EVA)) {
1086 			if (uaccess_kernel())
1087 				LoadHWU(addr, value, res);
1088 			else
1089 				LoadHWUE(addr, value, res);
1090 		} else {
1091 			LoadHWU(addr, value, res);
1092 		}
1093 
1094 		if (res)
1095 			goto fault;
1096 		compute_return_epc(regs);
1097 		regs->regs[insn.i_format.rt] = value;
1098 		break;
1099 
1100 	case lwu_op:
1101 #ifdef CONFIG_64BIT
1102 		/*
1103 		 * A 32-bit kernel might be running on a 64-bit processor.  But
1104 		 * if we're on a 32-bit processor and an i-cache incoherency
1105 		 * or race makes us see a 64-bit instruction here the sdl/sdr
1106 		 * would blow up, so for now we don't handle unaligned 64-bit
1107 		 * instructions on 32-bit kernels.
1108 		 */
1109 		if (!access_ok(addr, 4))
1110 			goto sigbus;
1111 
1112 		LoadWU(addr, value, res);
1113 		if (res)
1114 			goto fault;
1115 		compute_return_epc(regs);
1116 		regs->regs[insn.i_format.rt] = value;
1117 		break;
1118 #endif /* CONFIG_64BIT */
1119 
1120 		/* Cannot handle 64-bit instructions in 32-bit kernel */
1121 		goto sigill;
1122 
1123 	case ld_op:
1124 #ifdef CONFIG_64BIT
1125 		/*
1126 		 * A 32-bit kernel might be running on a 64-bit processor.  But
1127 		 * if we're on a 32-bit processor and an i-cache incoherency
1128 		 * or race makes us see a 64-bit instruction here the sdl/sdr
1129 		 * would blow up, so for now we don't handle unaligned 64-bit
1130 		 * instructions on 32-bit kernels.
1131 		 */
1132 		if (!access_ok(addr, 8))
1133 			goto sigbus;
1134 
1135 		LoadDW(addr, value, res);
1136 		if (res)
1137 			goto fault;
1138 		compute_return_epc(regs);
1139 		regs->regs[insn.i_format.rt] = value;
1140 		break;
1141 #endif /* CONFIG_64BIT */
1142 
1143 		/* Cannot handle 64-bit instructions in 32-bit kernel */
1144 		goto sigill;
1145 
1146 	case sh_op:
1147 		if (!access_ok(addr, 2))
1148 			goto sigbus;
1149 
1150 		compute_return_epc(regs);
1151 		value = regs->regs[insn.i_format.rt];
1152 
1153 		if (IS_ENABLED(CONFIG_EVA)) {
1154 			if (uaccess_kernel())
1155 				StoreHW(addr, value, res);
1156 			else
1157 				StoreHWE(addr, value, res);
1158 		} else {
1159 			StoreHW(addr, value, res);
1160 		}
1161 
1162 		if (res)
1163 			goto fault;
1164 		break;
1165 
1166 	case sw_op:
1167 		if (!access_ok(addr, 4))
1168 			goto sigbus;
1169 
1170 		compute_return_epc(regs);
1171 		value = regs->regs[insn.i_format.rt];
1172 
1173 		if (IS_ENABLED(CONFIG_EVA)) {
1174 			if (uaccess_kernel())
1175 				StoreW(addr, value, res);
1176 			else
1177 				StoreWE(addr, value, res);
1178 		} else {
1179 			StoreW(addr, value, res);
1180 		}
1181 
1182 		if (res)
1183 			goto fault;
1184 		break;
1185 
1186 	case sd_op:
1187 #ifdef CONFIG_64BIT
1188 		/*
1189 		 * A 32-bit kernel might be running on a 64-bit processor.  But
1190 		 * if we're on a 32-bit processor and an i-cache incoherency
1191 		 * or race makes us see a 64-bit instruction here the sdl/sdr
1192 		 * would blow up, so for now we don't handle unaligned 64-bit
1193 		 * instructions on 32-bit kernels.
1194 		 */
1195 		if (!access_ok(addr, 8))
1196 			goto sigbus;
1197 
1198 		compute_return_epc(regs);
1199 		value = regs->regs[insn.i_format.rt];
1200 		StoreDW(addr, value, res);
1201 		if (res)
1202 			goto fault;
1203 		break;
1204 #endif /* CONFIG_64BIT */
1205 
1206 		/* Cannot handle 64-bit instructions in 32-bit kernel */
1207 		goto sigill;
1208 
1209 #ifdef CONFIG_MIPS_FP_SUPPORT
1210 
1211 	case lwc1_op:
1212 	case ldc1_op:
1213 	case swc1_op:
1214 	case sdc1_op:
1215 	case cop1x_op: {
1216 		void __user *fault_addr = NULL;
1217 
1218 		die_if_kernel("Unaligned FP access in kernel code", regs);
1219 		BUG_ON(!used_math());
1220 
1221 		res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
1222 					       &fault_addr);
1223 		own_fpu(1);	/* Restore FPU state. */
1224 
1225 		/* Signal if something went wrong. */
1226 		process_fpemu_return(res, fault_addr, 0);
1227 
1228 		if (res == 0)
1229 			break;
1230 		return;
1231 	}
1232 #endif /* CONFIG_MIPS_FP_SUPPORT */
1233 
1234 #ifdef CONFIG_CPU_HAS_MSA
1235 
1236 	case msa_op: {
1237 		unsigned int wd, preempted;
1238 		enum msa_2b_fmt df;
1239 		union fpureg *fpr;
1240 
1241 		if (!cpu_has_msa)
1242 			goto sigill;
1243 
1244 		/*
1245 		 * If we've reached this point then userland should have taken
1246 		 * the MSA disabled exception & initialised vector context at
1247 		 * some point in the past.
1248 		 */
1249 		BUG_ON(!thread_msa_context_live());
1250 
1251 		df = insn.msa_mi10_format.df;
1252 		wd = insn.msa_mi10_format.wd;
1253 		fpr = &current->thread.fpu.fpr[wd];
1254 
1255 		switch (insn.msa_mi10_format.func) {
1256 		case msa_ld_op:
1257 			if (!access_ok(addr, sizeof(*fpr)))
1258 				goto sigbus;
1259 
1260 			do {
1261 				/*
1262 				 * If we have live MSA context keep track of
1263 				 * whether we get preempted in order to avoid
1264 				 * the register context we load being clobbered
1265 				 * by the live context as it's saved during
1266 				 * preemption. If we don't have live context
1267 				 * then it can't be saved to clobber the value
1268 				 * we load.
1269 				 */
1270 				preempted = test_thread_flag(TIF_USEDMSA);
1271 
1272 				res = __copy_from_user_inatomic(fpr, addr,
1273 								sizeof(*fpr));
1274 				if (res)
1275 					goto fault;
1276 
1277 				/*
1278 				 * Update the hardware register if it is in use
1279 				 * by the task in this quantum, in order to
1280 				 * avoid having to save & restore the whole
1281 				 * vector context.
1282 				 */
1283 				preempt_disable();
1284 				if (test_thread_flag(TIF_USEDMSA)) {
1285 					write_msa_wr(wd, fpr, df);
1286 					preempted = 0;
1287 				}
1288 				preempt_enable();
1289 			} while (preempted);
1290 			break;
1291 
1292 		case msa_st_op:
1293 			if (!access_ok(addr, sizeof(*fpr)))
1294 				goto sigbus;
1295 
1296 			/*
1297 			 * Update from the hardware register if it is in use by
1298 			 * the task in this quantum, in order to avoid having to
1299 			 * save & restore the whole vector context.
1300 			 */
1301 			preempt_disable();
1302 			if (test_thread_flag(TIF_USEDMSA))
1303 				read_msa_wr(wd, fpr, df);
1304 			preempt_enable();
1305 
1306 			res = __copy_to_user_inatomic(addr, fpr, sizeof(*fpr));
1307 			if (res)
1308 				goto fault;
1309 			break;
1310 
1311 		default:
1312 			goto sigbus;
1313 		}
1314 
1315 		compute_return_epc(regs);
1316 		break;
1317 	}
1318 #endif /* CONFIG_CPU_HAS_MSA */
1319 
1320 #ifndef CONFIG_CPU_MIPSR6
1321 	/*
1322 	 * COP2 is available to implementor for application specific use.
1323 	 * It's up to applications to register a notifier chain and do
1324 	 * whatever they have to do, including possible sending of signals.
1325 	 *
1326 	 * This instruction has been reallocated in Release 6
1327 	 */
1328 	case lwc2_op:
1329 		cu2_notifier_call_chain(CU2_LWC2_OP, regs);
1330 		break;
1331 
1332 	case ldc2_op:
1333 		cu2_notifier_call_chain(CU2_LDC2_OP, regs);
1334 		break;
1335 
1336 	case swc2_op:
1337 		cu2_notifier_call_chain(CU2_SWC2_OP, regs);
1338 		break;
1339 
1340 	case sdc2_op:
1341 		cu2_notifier_call_chain(CU2_SDC2_OP, regs);
1342 		break;
1343 #endif
1344 	default:
1345 		/*
1346 		 * Pheeee...  We encountered an yet unknown instruction or
1347 		 * cache coherence problem.  Die sucker, die ...
1348 		 */
1349 		goto sigill;
1350 	}
1351 
1352 #ifdef CONFIG_DEBUG_FS
1353 	unaligned_instructions++;
1354 #endif
1355 
1356 	return;
1357 
1358 fault:
1359 	/* roll back jump/branch */
1360 	regs->cp0_epc = origpc;
1361 	regs->regs[31] = orig31;
1362 	/* Did we have an exception handler installed? */
1363 	if (fixup_exception(regs))
1364 		return;
1365 
1366 	die_if_kernel("Unhandled kernel unaligned access", regs);
1367 	force_sig(SIGSEGV, current);
1368 
1369 	return;
1370 
1371 sigbus:
1372 	die_if_kernel("Unhandled kernel unaligned access", regs);
1373 	force_sig(SIGBUS, current);
1374 
1375 	return;
1376 
1377 sigill:
1378 	die_if_kernel
1379 	    ("Unhandled kernel unaligned access or invalid instruction", regs);
1380 	force_sig(SIGILL, current);
1381 }
1382 
1383 /* Recode table from 16-bit register notation to 32-bit GPR. */
1384 const int reg16to32[] = { 16, 17, 2, 3, 4, 5, 6, 7 };
1385 
1386 /* Recode table from 16-bit STORE register notation to 32-bit GPR. */
1387 static const int reg16to32st[] = { 0, 17, 2, 3, 4, 5, 6, 7 };
1388 
1389 static void emulate_load_store_microMIPS(struct pt_regs *regs,
1390 					 void __user *addr)
1391 {
1392 	unsigned long value;
1393 	unsigned int res;
1394 	int i;
1395 	unsigned int reg = 0, rvar;
1396 	unsigned long orig31;
1397 	u16 __user *pc16;
1398 	u16 halfword;
1399 	unsigned int word;
1400 	unsigned long origpc, contpc;
1401 	union mips_instruction insn;
1402 	struct mm_decoded_insn mminsn;
1403 
1404 	origpc = regs->cp0_epc;
1405 	orig31 = regs->regs[31];
1406 
1407 	mminsn.micro_mips_mode = 1;
1408 
1409 	/*
1410 	 * This load never faults.
1411 	 */
1412 	pc16 = (unsigned short __user *)msk_isa16_mode(regs->cp0_epc);
1413 	__get_user(halfword, pc16);
1414 	pc16++;
1415 	contpc = regs->cp0_epc + 2;
1416 	word = ((unsigned int)halfword << 16);
1417 	mminsn.pc_inc = 2;
1418 
1419 	if (!mm_insn_16bit(halfword)) {
1420 		__get_user(halfword, pc16);
1421 		pc16++;
1422 		contpc = regs->cp0_epc + 4;
1423 		mminsn.pc_inc = 4;
1424 		word |= halfword;
1425 	}
1426 	mminsn.insn = word;
1427 
1428 	if (get_user(halfword, pc16))
1429 		goto fault;
1430 	mminsn.next_pc_inc = 2;
1431 	word = ((unsigned int)halfword << 16);
1432 
1433 	if (!mm_insn_16bit(halfword)) {
1434 		pc16++;
1435 		if (get_user(halfword, pc16))
1436 			goto fault;
1437 		mminsn.next_pc_inc = 4;
1438 		word |= halfword;
1439 	}
1440 	mminsn.next_insn = word;
1441 
1442 	insn = (union mips_instruction)(mminsn.insn);
1443 	if (mm_isBranchInstr(regs, mminsn, &contpc))
1444 		insn = (union mips_instruction)(mminsn.next_insn);
1445 
1446 	/*  Parse instruction to find what to do */
1447 
1448 	switch (insn.mm_i_format.opcode) {
1449 
1450 	case mm_pool32a_op:
1451 		switch (insn.mm_x_format.func) {
1452 		case mm_lwxs_op:
1453 			reg = insn.mm_x_format.rd;
1454 			goto loadW;
1455 		}
1456 
1457 		goto sigbus;
1458 
1459 	case mm_pool32b_op:
1460 		switch (insn.mm_m_format.func) {
1461 		case mm_lwp_func:
1462 			reg = insn.mm_m_format.rd;
1463 			if (reg == 31)
1464 				goto sigbus;
1465 
1466 			if (!access_ok(addr, 8))
1467 				goto sigbus;
1468 
1469 			LoadW(addr, value, res);
1470 			if (res)
1471 				goto fault;
1472 			regs->regs[reg] = value;
1473 			addr += 4;
1474 			LoadW(addr, value, res);
1475 			if (res)
1476 				goto fault;
1477 			regs->regs[reg + 1] = value;
1478 			goto success;
1479 
1480 		case mm_swp_func:
1481 			reg = insn.mm_m_format.rd;
1482 			if (reg == 31)
1483 				goto sigbus;
1484 
1485 			if (!access_ok(addr, 8))
1486 				goto sigbus;
1487 
1488 			value = regs->regs[reg];
1489 			StoreW(addr, value, res);
1490 			if (res)
1491 				goto fault;
1492 			addr += 4;
1493 			value = regs->regs[reg + 1];
1494 			StoreW(addr, value, res);
1495 			if (res)
1496 				goto fault;
1497 			goto success;
1498 
1499 		case mm_ldp_func:
1500 #ifdef CONFIG_64BIT
1501 			reg = insn.mm_m_format.rd;
1502 			if (reg == 31)
1503 				goto sigbus;
1504 
1505 			if (!access_ok(addr, 16))
1506 				goto sigbus;
1507 
1508 			LoadDW(addr, value, res);
1509 			if (res)
1510 				goto fault;
1511 			regs->regs[reg] = value;
1512 			addr += 8;
1513 			LoadDW(addr, value, res);
1514 			if (res)
1515 				goto fault;
1516 			regs->regs[reg + 1] = value;
1517 			goto success;
1518 #endif /* CONFIG_64BIT */
1519 
1520 			goto sigill;
1521 
1522 		case mm_sdp_func:
1523 #ifdef CONFIG_64BIT
1524 			reg = insn.mm_m_format.rd;
1525 			if (reg == 31)
1526 				goto sigbus;
1527 
1528 			if (!access_ok(addr, 16))
1529 				goto sigbus;
1530 
1531 			value = regs->regs[reg];
1532 			StoreDW(addr, value, res);
1533 			if (res)
1534 				goto fault;
1535 			addr += 8;
1536 			value = regs->regs[reg + 1];
1537 			StoreDW(addr, value, res);
1538 			if (res)
1539 				goto fault;
1540 			goto success;
1541 #endif /* CONFIG_64BIT */
1542 
1543 			goto sigill;
1544 
1545 		case mm_lwm32_func:
1546 			reg = insn.mm_m_format.rd;
1547 			rvar = reg & 0xf;
1548 			if ((rvar > 9) || !reg)
1549 				goto sigill;
1550 			if (reg & 0x10) {
1551 				if (!access_ok(addr, 4 * (rvar + 1)))
1552 					goto sigbus;
1553 			} else {
1554 				if (!access_ok(addr, 4 * rvar))
1555 					goto sigbus;
1556 			}
1557 			if (rvar == 9)
1558 				rvar = 8;
1559 			for (i = 16; rvar; rvar--, i++) {
1560 				LoadW(addr, value, res);
1561 				if (res)
1562 					goto fault;
1563 				addr += 4;
1564 				regs->regs[i] = value;
1565 			}
1566 			if ((reg & 0xf) == 9) {
1567 				LoadW(addr, value, res);
1568 				if (res)
1569 					goto fault;
1570 				addr += 4;
1571 				regs->regs[30] = value;
1572 			}
1573 			if (reg & 0x10) {
1574 				LoadW(addr, value, res);
1575 				if (res)
1576 					goto fault;
1577 				regs->regs[31] = value;
1578 			}
1579 			goto success;
1580 
1581 		case mm_swm32_func:
1582 			reg = insn.mm_m_format.rd;
1583 			rvar = reg & 0xf;
1584 			if ((rvar > 9) || !reg)
1585 				goto sigill;
1586 			if (reg & 0x10) {
1587 				if (!access_ok(addr, 4 * (rvar + 1)))
1588 					goto sigbus;
1589 			} else {
1590 				if (!access_ok(addr, 4 * rvar))
1591 					goto sigbus;
1592 			}
1593 			if (rvar == 9)
1594 				rvar = 8;
1595 			for (i = 16; rvar; rvar--, i++) {
1596 				value = regs->regs[i];
1597 				StoreW(addr, value, res);
1598 				if (res)
1599 					goto fault;
1600 				addr += 4;
1601 			}
1602 			if ((reg & 0xf) == 9) {
1603 				value = regs->regs[30];
1604 				StoreW(addr, value, res);
1605 				if (res)
1606 					goto fault;
1607 				addr += 4;
1608 			}
1609 			if (reg & 0x10) {
1610 				value = regs->regs[31];
1611 				StoreW(addr, value, res);
1612 				if (res)
1613 					goto fault;
1614 			}
1615 			goto success;
1616 
1617 		case mm_ldm_func:
1618 #ifdef CONFIG_64BIT
1619 			reg = insn.mm_m_format.rd;
1620 			rvar = reg & 0xf;
1621 			if ((rvar > 9) || !reg)
1622 				goto sigill;
1623 			if (reg & 0x10) {
1624 				if (!access_ok(addr, 8 * (rvar + 1)))
1625 					goto sigbus;
1626 			} else {
1627 				if (!access_ok(addr, 8 * rvar))
1628 					goto sigbus;
1629 			}
1630 			if (rvar == 9)
1631 				rvar = 8;
1632 
1633 			for (i = 16; rvar; rvar--, i++) {
1634 				LoadDW(addr, value, res);
1635 				if (res)
1636 					goto fault;
1637 				addr += 4;
1638 				regs->regs[i] = value;
1639 			}
1640 			if ((reg & 0xf) == 9) {
1641 				LoadDW(addr, value, res);
1642 				if (res)
1643 					goto fault;
1644 				addr += 8;
1645 				regs->regs[30] = value;
1646 			}
1647 			if (reg & 0x10) {
1648 				LoadDW(addr, value, res);
1649 				if (res)
1650 					goto fault;
1651 				regs->regs[31] = value;
1652 			}
1653 			goto success;
1654 #endif /* CONFIG_64BIT */
1655 
1656 			goto sigill;
1657 
1658 		case mm_sdm_func:
1659 #ifdef CONFIG_64BIT
1660 			reg = insn.mm_m_format.rd;
1661 			rvar = reg & 0xf;
1662 			if ((rvar > 9) || !reg)
1663 				goto sigill;
1664 			if (reg & 0x10) {
1665 				if (!access_ok(addr, 8 * (rvar + 1)))
1666 					goto sigbus;
1667 			} else {
1668 				if (!access_ok(addr, 8 * rvar))
1669 					goto sigbus;
1670 			}
1671 			if (rvar == 9)
1672 				rvar = 8;
1673 
1674 			for (i = 16; rvar; rvar--, i++) {
1675 				value = regs->regs[i];
1676 				StoreDW(addr, value, res);
1677 				if (res)
1678 					goto fault;
1679 				addr += 8;
1680 			}
1681 			if ((reg & 0xf) == 9) {
1682 				value = regs->regs[30];
1683 				StoreDW(addr, value, res);
1684 				if (res)
1685 					goto fault;
1686 				addr += 8;
1687 			}
1688 			if (reg & 0x10) {
1689 				value = regs->regs[31];
1690 				StoreDW(addr, value, res);
1691 				if (res)
1692 					goto fault;
1693 			}
1694 			goto success;
1695 #endif /* CONFIG_64BIT */
1696 
1697 			goto sigill;
1698 
1699 			/*  LWC2, SWC2, LDC2, SDC2 are not serviced */
1700 		}
1701 
1702 		goto sigbus;
1703 
1704 	case mm_pool32c_op:
1705 		switch (insn.mm_m_format.func) {
1706 		case mm_lwu_func:
1707 			reg = insn.mm_m_format.rd;
1708 			goto loadWU;
1709 		}
1710 
1711 		/*  LL,SC,LLD,SCD are not serviced */
1712 		goto sigbus;
1713 
1714 #ifdef CONFIG_MIPS_FP_SUPPORT
1715 	case mm_pool32f_op:
1716 		switch (insn.mm_x_format.func) {
1717 		case mm_lwxc1_func:
1718 		case mm_swxc1_func:
1719 		case mm_ldxc1_func:
1720 		case mm_sdxc1_func:
1721 			goto fpu_emul;
1722 		}
1723 
1724 		goto sigbus;
1725 
1726 	case mm_ldc132_op:
1727 	case mm_sdc132_op:
1728 	case mm_lwc132_op:
1729 	case mm_swc132_op: {
1730 		void __user *fault_addr = NULL;
1731 
1732 fpu_emul:
1733 		/* roll back jump/branch */
1734 		regs->cp0_epc = origpc;
1735 		regs->regs[31] = orig31;
1736 
1737 		die_if_kernel("Unaligned FP access in kernel code", regs);
1738 		BUG_ON(!used_math());
1739 		BUG_ON(!is_fpu_owner());
1740 
1741 		res = fpu_emulator_cop1Handler(regs, &current->thread.fpu, 1,
1742 					       &fault_addr);
1743 		own_fpu(1);	/* restore FPU state */
1744 
1745 		/* If something went wrong, signal */
1746 		process_fpemu_return(res, fault_addr, 0);
1747 
1748 		if (res == 0)
1749 			goto success;
1750 		return;
1751 	}
1752 #endif /* CONFIG_MIPS_FP_SUPPORT */
1753 
1754 	case mm_lh32_op:
1755 		reg = insn.mm_i_format.rt;
1756 		goto loadHW;
1757 
1758 	case mm_lhu32_op:
1759 		reg = insn.mm_i_format.rt;
1760 		goto loadHWU;
1761 
1762 	case mm_lw32_op:
1763 		reg = insn.mm_i_format.rt;
1764 		goto loadW;
1765 
1766 	case mm_sh32_op:
1767 		reg = insn.mm_i_format.rt;
1768 		goto storeHW;
1769 
1770 	case mm_sw32_op:
1771 		reg = insn.mm_i_format.rt;
1772 		goto storeW;
1773 
1774 	case mm_ld32_op:
1775 		reg = insn.mm_i_format.rt;
1776 		goto loadDW;
1777 
1778 	case mm_sd32_op:
1779 		reg = insn.mm_i_format.rt;
1780 		goto storeDW;
1781 
1782 	case mm_pool16c_op:
1783 		switch (insn.mm16_m_format.func) {
1784 		case mm_lwm16_op:
1785 			reg = insn.mm16_m_format.rlist;
1786 			rvar = reg + 1;
1787 			if (!access_ok(addr, 4 * rvar))
1788 				goto sigbus;
1789 
1790 			for (i = 16; rvar; rvar--, i++) {
1791 				LoadW(addr, value, res);
1792 				if (res)
1793 					goto fault;
1794 				addr += 4;
1795 				regs->regs[i] = value;
1796 			}
1797 			LoadW(addr, value, res);
1798 			if (res)
1799 				goto fault;
1800 			regs->regs[31] = value;
1801 
1802 			goto success;
1803 
1804 		case mm_swm16_op:
1805 			reg = insn.mm16_m_format.rlist;
1806 			rvar = reg + 1;
1807 			if (!access_ok(addr, 4 * rvar))
1808 				goto sigbus;
1809 
1810 			for (i = 16; rvar; rvar--, i++) {
1811 				value = regs->regs[i];
1812 				StoreW(addr, value, res);
1813 				if (res)
1814 					goto fault;
1815 				addr += 4;
1816 			}
1817 			value = regs->regs[31];
1818 			StoreW(addr, value, res);
1819 			if (res)
1820 				goto fault;
1821 
1822 			goto success;
1823 
1824 		}
1825 
1826 		goto sigbus;
1827 
1828 	case mm_lhu16_op:
1829 		reg = reg16to32[insn.mm16_rb_format.rt];
1830 		goto loadHWU;
1831 
1832 	case mm_lw16_op:
1833 		reg = reg16to32[insn.mm16_rb_format.rt];
1834 		goto loadW;
1835 
1836 	case mm_sh16_op:
1837 		reg = reg16to32st[insn.mm16_rb_format.rt];
1838 		goto storeHW;
1839 
1840 	case mm_sw16_op:
1841 		reg = reg16to32st[insn.mm16_rb_format.rt];
1842 		goto storeW;
1843 
1844 	case mm_lwsp16_op:
1845 		reg = insn.mm16_r5_format.rt;
1846 		goto loadW;
1847 
1848 	case mm_swsp16_op:
1849 		reg = insn.mm16_r5_format.rt;
1850 		goto storeW;
1851 
1852 	case mm_lwgp16_op:
1853 		reg = reg16to32[insn.mm16_r3_format.rt];
1854 		goto loadW;
1855 
1856 	default:
1857 		goto sigill;
1858 	}
1859 
1860 loadHW:
1861 	if (!access_ok(addr, 2))
1862 		goto sigbus;
1863 
1864 	LoadHW(addr, value, res);
1865 	if (res)
1866 		goto fault;
1867 	regs->regs[reg] = value;
1868 	goto success;
1869 
1870 loadHWU:
1871 	if (!access_ok(addr, 2))
1872 		goto sigbus;
1873 
1874 	LoadHWU(addr, value, res);
1875 	if (res)
1876 		goto fault;
1877 	regs->regs[reg] = value;
1878 	goto success;
1879 
1880 loadW:
1881 	if (!access_ok(addr, 4))
1882 		goto sigbus;
1883 
1884 	LoadW(addr, value, res);
1885 	if (res)
1886 		goto fault;
1887 	regs->regs[reg] = value;
1888 	goto success;
1889 
1890 loadWU:
1891 #ifdef CONFIG_64BIT
1892 	/*
1893 	 * A 32-bit kernel might be running on a 64-bit processor.  But
1894 	 * if we're on a 32-bit processor and an i-cache incoherency
1895 	 * or race makes us see a 64-bit instruction here the sdl/sdr
1896 	 * would blow up, so for now we don't handle unaligned 64-bit
1897 	 * instructions on 32-bit kernels.
1898 	 */
1899 	if (!access_ok(addr, 4))
1900 		goto sigbus;
1901 
1902 	LoadWU(addr, value, res);
1903 	if (res)
1904 		goto fault;
1905 	regs->regs[reg] = value;
1906 	goto success;
1907 #endif /* CONFIG_64BIT */
1908 
1909 	/* Cannot handle 64-bit instructions in 32-bit kernel */
1910 	goto sigill;
1911 
1912 loadDW:
1913 #ifdef CONFIG_64BIT
1914 	/*
1915 	 * A 32-bit kernel might be running on a 64-bit processor.  But
1916 	 * if we're on a 32-bit processor and an i-cache incoherency
1917 	 * or race makes us see a 64-bit instruction here the sdl/sdr
1918 	 * would blow up, so for now we don't handle unaligned 64-bit
1919 	 * instructions on 32-bit kernels.
1920 	 */
1921 	if (!access_ok(addr, 8))
1922 		goto sigbus;
1923 
1924 	LoadDW(addr, value, res);
1925 	if (res)
1926 		goto fault;
1927 	regs->regs[reg] = value;
1928 	goto success;
1929 #endif /* CONFIG_64BIT */
1930 
1931 	/* Cannot handle 64-bit instructions in 32-bit kernel */
1932 	goto sigill;
1933 
1934 storeHW:
1935 	if (!access_ok(addr, 2))
1936 		goto sigbus;
1937 
1938 	value = regs->regs[reg];
1939 	StoreHW(addr, value, res);
1940 	if (res)
1941 		goto fault;
1942 	goto success;
1943 
1944 storeW:
1945 	if (!access_ok(addr, 4))
1946 		goto sigbus;
1947 
1948 	value = regs->regs[reg];
1949 	StoreW(addr, value, res);
1950 	if (res)
1951 		goto fault;
1952 	goto success;
1953 
1954 storeDW:
1955 #ifdef CONFIG_64BIT
1956 	/*
1957 	 * A 32-bit kernel might be running on a 64-bit processor.  But
1958 	 * if we're on a 32-bit processor and an i-cache incoherency
1959 	 * or race makes us see a 64-bit instruction here the sdl/sdr
1960 	 * would blow up, so for now we don't handle unaligned 64-bit
1961 	 * instructions on 32-bit kernels.
1962 	 */
1963 	if (!access_ok(addr, 8))
1964 		goto sigbus;
1965 
1966 	value = regs->regs[reg];
1967 	StoreDW(addr, value, res);
1968 	if (res)
1969 		goto fault;
1970 	goto success;
1971 #endif /* CONFIG_64BIT */
1972 
1973 	/* Cannot handle 64-bit instructions in 32-bit kernel */
1974 	goto sigill;
1975 
1976 success:
1977 	regs->cp0_epc = contpc;	/* advance or branch */
1978 
1979 #ifdef CONFIG_DEBUG_FS
1980 	unaligned_instructions++;
1981 #endif
1982 	return;
1983 
1984 fault:
1985 	/* roll back jump/branch */
1986 	regs->cp0_epc = origpc;
1987 	regs->regs[31] = orig31;
1988 	/* Did we have an exception handler installed? */
1989 	if (fixup_exception(regs))
1990 		return;
1991 
1992 	die_if_kernel("Unhandled kernel unaligned access", regs);
1993 	force_sig(SIGSEGV, current);
1994 
1995 	return;
1996 
1997 sigbus:
1998 	die_if_kernel("Unhandled kernel unaligned access", regs);
1999 	force_sig(SIGBUS, current);
2000 
2001 	return;
2002 
2003 sigill:
2004 	die_if_kernel
2005 	    ("Unhandled kernel unaligned access or invalid instruction", regs);
2006 	force_sig(SIGILL, current);
2007 }
2008 
2009 static void emulate_load_store_MIPS16e(struct pt_regs *regs, void __user * addr)
2010 {
2011 	unsigned long value;
2012 	unsigned int res;
2013 	int reg;
2014 	unsigned long orig31;
2015 	u16 __user *pc16;
2016 	unsigned long origpc;
2017 	union mips16e_instruction mips16inst, oldinst;
2018 	unsigned int opcode;
2019 	int extended = 0;
2020 
2021 	origpc = regs->cp0_epc;
2022 	orig31 = regs->regs[31];
2023 	pc16 = (unsigned short __user *)msk_isa16_mode(origpc);
2024 	/*
2025 	 * This load never faults.
2026 	 */
2027 	__get_user(mips16inst.full, pc16);
2028 	oldinst = mips16inst;
2029 
2030 	/* skip EXTEND instruction */
2031 	if (mips16inst.ri.opcode == MIPS16e_extend_op) {
2032 		extended = 1;
2033 		pc16++;
2034 		__get_user(mips16inst.full, pc16);
2035 	} else if (delay_slot(regs)) {
2036 		/*  skip jump instructions */
2037 		/*  JAL/JALX are 32 bits but have OPCODE in first short int */
2038 		if (mips16inst.ri.opcode == MIPS16e_jal_op)
2039 			pc16++;
2040 		pc16++;
2041 		if (get_user(mips16inst.full, pc16))
2042 			goto sigbus;
2043 	}
2044 
2045 	opcode = mips16inst.ri.opcode;
2046 	switch (opcode) {
2047 	case MIPS16e_i64_op:	/* I64 or RI64 instruction */
2048 		switch (mips16inst.i64.func) {	/* I64/RI64 func field check */
2049 		case MIPS16e_ldpc_func:
2050 		case MIPS16e_ldsp_func:
2051 			reg = reg16to32[mips16inst.ri64.ry];
2052 			goto loadDW;
2053 
2054 		case MIPS16e_sdsp_func:
2055 			reg = reg16to32[mips16inst.ri64.ry];
2056 			goto writeDW;
2057 
2058 		case MIPS16e_sdrasp_func:
2059 			reg = 29;	/* GPRSP */
2060 			goto writeDW;
2061 		}
2062 
2063 		goto sigbus;
2064 
2065 	case MIPS16e_swsp_op:
2066 		reg = reg16to32[mips16inst.ri.rx];
2067 		if (extended && cpu_has_mips16e2)
2068 			switch (mips16inst.ri.imm >> 5) {
2069 			case 0:		/* SWSP */
2070 			case 1:		/* SWGP */
2071 				break;
2072 			case 2:		/* SHGP */
2073 				opcode = MIPS16e_sh_op;
2074 				break;
2075 			default:
2076 				goto sigbus;
2077 			}
2078 		break;
2079 
2080 	case MIPS16e_lwpc_op:
2081 		reg = reg16to32[mips16inst.ri.rx];
2082 		break;
2083 
2084 	case MIPS16e_lwsp_op:
2085 		reg = reg16to32[mips16inst.ri.rx];
2086 		if (extended && cpu_has_mips16e2)
2087 			switch (mips16inst.ri.imm >> 5) {
2088 			case 0:		/* LWSP */
2089 			case 1:		/* LWGP */
2090 				break;
2091 			case 2:		/* LHGP */
2092 				opcode = MIPS16e_lh_op;
2093 				break;
2094 			case 4:		/* LHUGP */
2095 				opcode = MIPS16e_lhu_op;
2096 				break;
2097 			default:
2098 				goto sigbus;
2099 			}
2100 		break;
2101 
2102 	case MIPS16e_i8_op:
2103 		if (mips16inst.i8.func != MIPS16e_swrasp_func)
2104 			goto sigbus;
2105 		reg = 29;	/* GPRSP */
2106 		break;
2107 
2108 	default:
2109 		reg = reg16to32[mips16inst.rri.ry];
2110 		break;
2111 	}
2112 
2113 	switch (opcode) {
2114 
2115 	case MIPS16e_lb_op:
2116 	case MIPS16e_lbu_op:
2117 	case MIPS16e_sb_op:
2118 		goto sigbus;
2119 
2120 	case MIPS16e_lh_op:
2121 		if (!access_ok(addr, 2))
2122 			goto sigbus;
2123 
2124 		LoadHW(addr, value, res);
2125 		if (res)
2126 			goto fault;
2127 		MIPS16e_compute_return_epc(regs, &oldinst);
2128 		regs->regs[reg] = value;
2129 		break;
2130 
2131 	case MIPS16e_lhu_op:
2132 		if (!access_ok(addr, 2))
2133 			goto sigbus;
2134 
2135 		LoadHWU(addr, value, res);
2136 		if (res)
2137 			goto fault;
2138 		MIPS16e_compute_return_epc(regs, &oldinst);
2139 		regs->regs[reg] = value;
2140 		break;
2141 
2142 	case MIPS16e_lw_op:
2143 	case MIPS16e_lwpc_op:
2144 	case MIPS16e_lwsp_op:
2145 		if (!access_ok(addr, 4))
2146 			goto sigbus;
2147 
2148 		LoadW(addr, value, res);
2149 		if (res)
2150 			goto fault;
2151 		MIPS16e_compute_return_epc(regs, &oldinst);
2152 		regs->regs[reg] = value;
2153 		break;
2154 
2155 	case MIPS16e_lwu_op:
2156 #ifdef CONFIG_64BIT
2157 		/*
2158 		 * A 32-bit kernel might be running on a 64-bit processor.  But
2159 		 * if we're on a 32-bit processor and an i-cache incoherency
2160 		 * or race makes us see a 64-bit instruction here the sdl/sdr
2161 		 * would blow up, so for now we don't handle unaligned 64-bit
2162 		 * instructions on 32-bit kernels.
2163 		 */
2164 		if (!access_ok(addr, 4))
2165 			goto sigbus;
2166 
2167 		LoadWU(addr, value, res);
2168 		if (res)
2169 			goto fault;
2170 		MIPS16e_compute_return_epc(regs, &oldinst);
2171 		regs->regs[reg] = value;
2172 		break;
2173 #endif /* CONFIG_64BIT */
2174 
2175 		/* Cannot handle 64-bit instructions in 32-bit kernel */
2176 		goto sigill;
2177 
2178 	case MIPS16e_ld_op:
2179 loadDW:
2180 #ifdef CONFIG_64BIT
2181 		/*
2182 		 * A 32-bit kernel might be running on a 64-bit processor.  But
2183 		 * if we're on a 32-bit processor and an i-cache incoherency
2184 		 * or race makes us see a 64-bit instruction here the sdl/sdr
2185 		 * would blow up, so for now we don't handle unaligned 64-bit
2186 		 * instructions on 32-bit kernels.
2187 		 */
2188 		if (!access_ok(addr, 8))
2189 			goto sigbus;
2190 
2191 		LoadDW(addr, value, res);
2192 		if (res)
2193 			goto fault;
2194 		MIPS16e_compute_return_epc(regs, &oldinst);
2195 		regs->regs[reg] = value;
2196 		break;
2197 #endif /* CONFIG_64BIT */
2198 
2199 		/* Cannot handle 64-bit instructions in 32-bit kernel */
2200 		goto sigill;
2201 
2202 	case MIPS16e_sh_op:
2203 		if (!access_ok(addr, 2))
2204 			goto sigbus;
2205 
2206 		MIPS16e_compute_return_epc(regs, &oldinst);
2207 		value = regs->regs[reg];
2208 		StoreHW(addr, value, res);
2209 		if (res)
2210 			goto fault;
2211 		break;
2212 
2213 	case MIPS16e_sw_op:
2214 	case MIPS16e_swsp_op:
2215 	case MIPS16e_i8_op:	/* actually - MIPS16e_swrasp_func */
2216 		if (!access_ok(addr, 4))
2217 			goto sigbus;
2218 
2219 		MIPS16e_compute_return_epc(regs, &oldinst);
2220 		value = regs->regs[reg];
2221 		StoreW(addr, value, res);
2222 		if (res)
2223 			goto fault;
2224 		break;
2225 
2226 	case MIPS16e_sd_op:
2227 writeDW:
2228 #ifdef CONFIG_64BIT
2229 		/*
2230 		 * A 32-bit kernel might be running on a 64-bit processor.  But
2231 		 * if we're on a 32-bit processor and an i-cache incoherency
2232 		 * or race makes us see a 64-bit instruction here the sdl/sdr
2233 		 * would blow up, so for now we don't handle unaligned 64-bit
2234 		 * instructions on 32-bit kernels.
2235 		 */
2236 		if (!access_ok(addr, 8))
2237 			goto sigbus;
2238 
2239 		MIPS16e_compute_return_epc(regs, &oldinst);
2240 		value = regs->regs[reg];
2241 		StoreDW(addr, value, res);
2242 		if (res)
2243 			goto fault;
2244 		break;
2245 #endif /* CONFIG_64BIT */
2246 
2247 		/* Cannot handle 64-bit instructions in 32-bit kernel */
2248 		goto sigill;
2249 
2250 	default:
2251 		/*
2252 		 * Pheeee...  We encountered an yet unknown instruction or
2253 		 * cache coherence problem.  Die sucker, die ...
2254 		 */
2255 		goto sigill;
2256 	}
2257 
2258 #ifdef CONFIG_DEBUG_FS
2259 	unaligned_instructions++;
2260 #endif
2261 
2262 	return;
2263 
2264 fault:
2265 	/* roll back jump/branch */
2266 	regs->cp0_epc = origpc;
2267 	regs->regs[31] = orig31;
2268 	/* Did we have an exception handler installed? */
2269 	if (fixup_exception(regs))
2270 		return;
2271 
2272 	die_if_kernel("Unhandled kernel unaligned access", regs);
2273 	force_sig(SIGSEGV, current);
2274 
2275 	return;
2276 
2277 sigbus:
2278 	die_if_kernel("Unhandled kernel unaligned access", regs);
2279 	force_sig(SIGBUS, current);
2280 
2281 	return;
2282 
2283 sigill:
2284 	die_if_kernel
2285 	    ("Unhandled kernel unaligned access or invalid instruction", regs);
2286 	force_sig(SIGILL, current);
2287 }
2288 
2289 asmlinkage void do_ade(struct pt_regs *regs)
2290 {
2291 	enum ctx_state prev_state;
2292 	unsigned int __user *pc;
2293 	mm_segment_t seg;
2294 
2295 	prev_state = exception_enter();
2296 	perf_sw_event(PERF_COUNT_SW_ALIGNMENT_FAULTS,
2297 			1, regs, regs->cp0_badvaddr);
2298 	/*
2299 	 * Did we catch a fault trying to load an instruction?
2300 	 */
2301 	if (regs->cp0_badvaddr == regs->cp0_epc)
2302 		goto sigbus;
2303 
2304 	if (user_mode(regs) && !test_thread_flag(TIF_FIXADE))
2305 		goto sigbus;
2306 	if (unaligned_action == UNALIGNED_ACTION_SIGNAL)
2307 		goto sigbus;
2308 
2309 	/*
2310 	 * Do branch emulation only if we didn't forward the exception.
2311 	 * This is all so but ugly ...
2312 	 */
2313 
2314 	/*
2315 	 * Are we running in microMIPS mode?
2316 	 */
2317 	if (get_isa16_mode(regs->cp0_epc)) {
2318 		/*
2319 		 * Did we catch a fault trying to load an instruction in
2320 		 * 16-bit mode?
2321 		 */
2322 		if (regs->cp0_badvaddr == msk_isa16_mode(regs->cp0_epc))
2323 			goto sigbus;
2324 		if (unaligned_action == UNALIGNED_ACTION_SHOW)
2325 			show_registers(regs);
2326 
2327 		if (cpu_has_mmips) {
2328 			seg = get_fs();
2329 			if (!user_mode(regs))
2330 				set_fs(KERNEL_DS);
2331 			emulate_load_store_microMIPS(regs,
2332 				(void __user *)regs->cp0_badvaddr);
2333 			set_fs(seg);
2334 
2335 			return;
2336 		}
2337 
2338 		if (cpu_has_mips16) {
2339 			seg = get_fs();
2340 			if (!user_mode(regs))
2341 				set_fs(KERNEL_DS);
2342 			emulate_load_store_MIPS16e(regs,
2343 				(void __user *)regs->cp0_badvaddr);
2344 			set_fs(seg);
2345 
2346 			return;
2347 		}
2348 
2349 		goto sigbus;
2350 	}
2351 
2352 	if (unaligned_action == UNALIGNED_ACTION_SHOW)
2353 		show_registers(regs);
2354 	pc = (unsigned int __user *)exception_epc(regs);
2355 
2356 	seg = get_fs();
2357 	if (!user_mode(regs))
2358 		set_fs(KERNEL_DS);
2359 	emulate_load_store_insn(regs, (void __user *)regs->cp0_badvaddr, pc);
2360 	set_fs(seg);
2361 
2362 	return;
2363 
2364 sigbus:
2365 	die_if_kernel("Kernel unaligned instruction access", regs);
2366 	force_sig(SIGBUS, current);
2367 
2368 	/*
2369 	 * XXX On return from the signal handler we should advance the epc
2370 	 */
2371 	exception_exit(prev_state);
2372 }
2373 
2374 #ifdef CONFIG_DEBUG_FS
2375 static int __init debugfs_unaligned(void)
2376 {
2377 	struct dentry *d;
2378 
2379 	if (!mips_debugfs_dir)
2380 		return -ENODEV;
2381 	d = debugfs_create_u32("unaligned_instructions", S_IRUGO,
2382 			       mips_debugfs_dir, &unaligned_instructions);
2383 	if (!d)
2384 		return -ENOMEM;
2385 	d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR,
2386 			       mips_debugfs_dir, &unaligned_action);
2387 	if (!d)
2388 		return -ENOMEM;
2389 	return 0;
2390 }
2391 arch_initcall(debugfs_unaligned);
2392 #endif
2393