1 /* 2 * Count register synchronisation. 3 * 4 * All CPUs will have their count registers synchronised to the CPU0 next time 5 * value. This can cause a small timewarp for CPU0. All other CPU's should 6 * not have done anything significant (but they may have had interrupts 7 * enabled briefly - prom_smp_finish() should not be responsible for enabling 8 * interrupts...) 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/irqflags.h> 13 #include <linux/cpumask.h> 14 15 #include <asm/r4k-timer.h> 16 #include <linux/atomic.h> 17 #include <asm/barrier.h> 18 #include <asm/mipsregs.h> 19 20 static unsigned int initcount = 0; 21 static atomic_t count_count_start = ATOMIC_INIT(0); 22 static atomic_t count_count_stop = ATOMIC_INIT(0); 23 24 #define COUNTON 100 25 #define NR_LOOPS 3 26 27 void synchronise_count_master(int cpu) 28 { 29 int i; 30 unsigned long flags; 31 32 pr_info("Synchronize counters for CPU %u: ", cpu); 33 34 local_irq_save(flags); 35 36 /* 37 * We loop a few times to get a primed instruction cache, 38 * then the last pass is more or less synchronised and 39 * the master and slaves each set their cycle counters to a known 40 * value all at once. This reduces the chance of having random offsets 41 * between the processors, and guarantees that the maximum 42 * delay between the cycle counters is never bigger than 43 * the latency of information-passing (cachelines) between 44 * two CPUs. 45 */ 46 47 for (i = 0; i < NR_LOOPS; i++) { 48 /* slaves loop on '!= 2' */ 49 while (atomic_read(&count_count_start) != 1) 50 mb(); 51 atomic_set(&count_count_stop, 0); 52 smp_wmb(); 53 54 /* Let the slave writes its count register */ 55 atomic_inc(&count_count_start); 56 57 /* Count will be initialised to current timer */ 58 if (i == 1) 59 initcount = read_c0_count(); 60 61 /* 62 * Everyone initialises count in the last loop: 63 */ 64 if (i == NR_LOOPS-1) 65 write_c0_count(initcount); 66 67 /* 68 * Wait for slave to leave the synchronization point: 69 */ 70 while (atomic_read(&count_count_stop) != 1) 71 mb(); 72 atomic_set(&count_count_start, 0); 73 smp_wmb(); 74 atomic_inc(&count_count_stop); 75 } 76 /* Arrange for an interrupt in a short while */ 77 write_c0_compare(read_c0_count() + COUNTON); 78 79 local_irq_restore(flags); 80 81 /* 82 * i386 code reported the skew here, but the 83 * count registers were almost certainly out of sync 84 * so no point in alarming people 85 */ 86 pr_cont("done.\n"); 87 } 88 89 void synchronise_count_slave(int cpu) 90 { 91 int i; 92 93 /* 94 * Not every cpu is online at the time this gets called, 95 * so we first wait for the master to say everyone is ready 96 */ 97 98 for (i = 0; i < NR_LOOPS; i++) { 99 atomic_inc(&count_count_start); 100 while (atomic_read(&count_count_start) != 2) 101 mb(); 102 103 /* 104 * Everyone initialises count in the last loop: 105 */ 106 if (i == NR_LOOPS-1) 107 write_c0_count(initcount); 108 109 atomic_inc(&count_count_stop); 110 while (atomic_read(&count_count_stop) != 2) 111 mb(); 112 } 113 /* Arrange for an interrupt in a short while */ 114 write_c0_compare(read_c0_count() + COUNTON); 115 } 116 #undef NR_LOOPS 117