1 /* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Copyright (C) 2011 by Kevin Cernekee (cernekee@gmail.com) 7 * 8 * SMP support for BMIPS 9 */ 10 11 #include <linux/init.h> 12 #include <linux/sched.h> 13 #include <linux/mm.h> 14 #include <linux/delay.h> 15 #include <linux/smp.h> 16 #include <linux/interrupt.h> 17 #include <linux/spinlock.h> 18 #include <linux/cpu.h> 19 #include <linux/cpumask.h> 20 #include <linux/reboot.h> 21 #include <linux/io.h> 22 #include <linux/compiler.h> 23 #include <linux/linkage.h> 24 #include <linux/bug.h> 25 #include <linux/kernel.h> 26 27 #include <asm/time.h> 28 #include <asm/pgtable.h> 29 #include <asm/processor.h> 30 #include <asm/bootinfo.h> 31 #include <asm/pmon.h> 32 #include <asm/cacheflush.h> 33 #include <asm/tlbflush.h> 34 #include <asm/mipsregs.h> 35 #include <asm/bmips.h> 36 #include <asm/traps.h> 37 #include <asm/barrier.h> 38 39 static int __maybe_unused max_cpus = 1; 40 41 /* these may be configured by the platform code */ 42 int bmips_smp_enabled = 1; 43 int bmips_cpu_offset; 44 cpumask_t bmips_booted_mask; 45 46 #ifdef CONFIG_SMP 47 48 /* initial $sp, $gp - used by arch/mips/kernel/bmips_vec.S */ 49 unsigned long bmips_smp_boot_sp; 50 unsigned long bmips_smp_boot_gp; 51 52 static void bmips_send_ipi_single(int cpu, unsigned int action); 53 static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id); 54 55 /* SW interrupts 0,1 are used for interprocessor signaling */ 56 #define IPI0_IRQ (MIPS_CPU_IRQ_BASE + 0) 57 #define IPI1_IRQ (MIPS_CPU_IRQ_BASE + 1) 58 59 #define CPUNUM(cpu, shift) (((cpu) + bmips_cpu_offset) << (shift)) 60 #define ACTION_CLR_IPI(cpu, ipi) (0x2000 | CPUNUM(cpu, 9) | ((ipi) << 8)) 61 #define ACTION_SET_IPI(cpu, ipi) (0x3000 | CPUNUM(cpu, 9) | ((ipi) << 8)) 62 #define ACTION_BOOT_THREAD(cpu) (0x08 | CPUNUM(cpu, 0)) 63 64 static void __init bmips_smp_setup(void) 65 { 66 int i, cpu = 1, boot_cpu = 0; 67 68 #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) 69 /* arbitration priority */ 70 clear_c0_brcm_cmt_ctrl(0x30); 71 72 /* NBK and weak order flags */ 73 set_c0_brcm_config_0(0x30000); 74 75 /* Find out if we are running on TP0 or TP1 */ 76 boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31)); 77 78 /* 79 * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread 80 * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output 81 * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output 82 * 83 * If booting from TP1, leave the existing CMT interrupt routing 84 * such that TP0 responds to SW1 and TP1 responds to SW0. 85 */ 86 if (boot_cpu == 0) 87 change_c0_brcm_cmt_intr(0xf8018000, 88 (0x02 << 27) | (0x03 << 15)); 89 else 90 change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27)); 91 92 /* single core, 2 threads (2 pipelines) */ 93 max_cpus = 2; 94 #elif defined(CONFIG_CPU_BMIPS5000) 95 /* enable raceless SW interrupts */ 96 set_c0_brcm_config(0x03 << 22); 97 98 /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */ 99 change_c0_brcm_mode(0x1f << 27, 0x02 << 27); 100 101 /* N cores, 2 threads per core */ 102 max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1; 103 104 /* clear any pending SW interrupts */ 105 for (i = 0; i < max_cpus; i++) { 106 write_c0_brcm_action(ACTION_CLR_IPI(i, 0)); 107 write_c0_brcm_action(ACTION_CLR_IPI(i, 1)); 108 } 109 #endif 110 111 if (!bmips_smp_enabled) 112 max_cpus = 1; 113 114 /* this can be overridden by the BSP */ 115 if (!board_ebase_setup) 116 board_ebase_setup = &bmips_ebase_setup; 117 118 __cpu_number_map[boot_cpu] = 0; 119 __cpu_logical_map[0] = boot_cpu; 120 121 for (i = 0; i < max_cpus; i++) { 122 if (i != boot_cpu) { 123 __cpu_number_map[i] = cpu; 124 __cpu_logical_map[cpu] = i; 125 cpu++; 126 } 127 set_cpu_possible(i, 1); 128 set_cpu_present(i, 1); 129 } 130 } 131 132 /* 133 * IPI IRQ setup - runs on CPU0 134 */ 135 static void bmips_prepare_cpus(unsigned int max_cpus) 136 { 137 if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU, 138 "smp_ipi0", NULL)) 139 panic("Can't request IPI0 interrupt\n"); 140 if (request_irq(IPI1_IRQ, bmips_ipi_interrupt, IRQF_PERCPU, 141 "smp_ipi1", NULL)) 142 panic("Can't request IPI1 interrupt\n"); 143 } 144 145 /* 146 * Tell the hardware to boot CPUx - runs on CPU0 147 */ 148 static void bmips_boot_secondary(int cpu, struct task_struct *idle) 149 { 150 bmips_smp_boot_sp = __KSTK_TOS(idle); 151 bmips_smp_boot_gp = (unsigned long)task_thread_info(idle); 152 mb(); 153 154 /* 155 * Initial boot sequence for secondary CPU: 156 * bmips_reset_nmi_vec @ a000_0000 -> 157 * bmips_smp_entry -> 158 * plat_wired_tlb_setup (cached function call; optional) -> 159 * start_secondary (cached jump) 160 * 161 * Warm restart sequence: 162 * play_dead WAIT loop -> 163 * bmips_smp_int_vec @ BMIPS_WARM_RESTART_VEC -> 164 * eret to play_dead -> 165 * bmips_secondary_reentry -> 166 * start_secondary 167 */ 168 169 pr_info("SMP: Booting CPU%d...\n", cpu); 170 171 if (cpumask_test_cpu(cpu, &bmips_booted_mask)) 172 bmips_send_ipi_single(cpu, 0); 173 else { 174 #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) 175 /* Reset slave TP1 if booting from TP0 */ 176 if (cpu_logical_map(cpu) == 1) 177 set_c0_brcm_cmt_ctrl(0x01); 178 #elif defined(CONFIG_CPU_BMIPS5000) 179 if (cpu & 0x01) 180 write_c0_brcm_action(ACTION_BOOT_THREAD(cpu)); 181 else { 182 /* 183 * core N thread 0 was already booted; just 184 * pulse the NMI line 185 */ 186 bmips_write_zscm_reg(0x210, 0xc0000000); 187 udelay(10); 188 bmips_write_zscm_reg(0x210, 0x00); 189 } 190 #endif 191 cpumask_set_cpu(cpu, &bmips_booted_mask); 192 } 193 } 194 195 /* 196 * Early setup - runs on secondary CPU after cache probe 197 */ 198 static void bmips_init_secondary(void) 199 { 200 /* move NMI vector to kseg0, in case XKS01 is enabled */ 201 202 #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380) 203 void __iomem *cbr = BMIPS_GET_CBR(); 204 unsigned long old_vec; 205 206 old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1); 207 __raw_writel(old_vec & ~0x20000000, cbr + BMIPS_RELO_VECTOR_CONTROL_1); 208 209 clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0); 210 #elif defined(CONFIG_CPU_BMIPS5000) 211 write_c0_brcm_bootvec(read_c0_brcm_bootvec() & 212 (smp_processor_id() & 0x01 ? ~0x20000000 : ~0x2000)); 213 214 write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0)); 215 #endif 216 } 217 218 /* 219 * Late setup - runs on secondary CPU before entering the idle loop 220 */ 221 static void bmips_smp_finish(void) 222 { 223 pr_info("SMP: CPU%d is running\n", smp_processor_id()); 224 225 /* make sure there won't be a timer interrupt for a little while */ 226 write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ); 227 228 irq_enable_hazard(); 229 set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE); 230 irq_enable_hazard(); 231 } 232 233 /* 234 * Runs on CPU0 after all CPUs have been booted 235 */ 236 static void bmips_cpus_done(void) 237 { 238 } 239 240 #if defined(CONFIG_CPU_BMIPS5000) 241 242 /* 243 * BMIPS5000 raceless IPIs 244 * 245 * Each CPU has two inbound SW IRQs which are independent of all other CPUs. 246 * IPI0 is used for SMP_RESCHEDULE_YOURSELF 247 * IPI1 is used for SMP_CALL_FUNCTION 248 */ 249 250 static void bmips_send_ipi_single(int cpu, unsigned int action) 251 { 252 write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION)); 253 } 254 255 static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id) 256 { 257 int action = irq - IPI0_IRQ; 258 259 write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), action)); 260 261 if (action == 0) 262 scheduler_ipi(); 263 else 264 smp_call_function_interrupt(); 265 266 return IRQ_HANDLED; 267 } 268 269 #else 270 271 /* 272 * BMIPS43xx racey IPIs 273 * 274 * We use one inbound SW IRQ for each CPU. 275 * 276 * A spinlock must be held in order to keep CPUx from accidentally clearing 277 * an incoming IPI when it writes CP0 CAUSE to raise an IPI on CPUy. The 278 * same spinlock is used to protect the action masks. 279 */ 280 281 static DEFINE_SPINLOCK(ipi_lock); 282 static DEFINE_PER_CPU(int, ipi_action_mask); 283 284 static void bmips_send_ipi_single(int cpu, unsigned int action) 285 { 286 unsigned long flags; 287 288 spin_lock_irqsave(&ipi_lock, flags); 289 set_c0_cause(cpu ? C_SW1 : C_SW0); 290 per_cpu(ipi_action_mask, cpu) |= action; 291 irq_enable_hazard(); 292 spin_unlock_irqrestore(&ipi_lock, flags); 293 } 294 295 static irqreturn_t bmips_ipi_interrupt(int irq, void *dev_id) 296 { 297 unsigned long flags; 298 int action, cpu = irq - IPI0_IRQ; 299 300 spin_lock_irqsave(&ipi_lock, flags); 301 action = __get_cpu_var(ipi_action_mask); 302 per_cpu(ipi_action_mask, cpu) = 0; 303 clear_c0_cause(cpu ? C_SW1 : C_SW0); 304 spin_unlock_irqrestore(&ipi_lock, flags); 305 306 if (action & SMP_RESCHEDULE_YOURSELF) 307 scheduler_ipi(); 308 if (action & SMP_CALL_FUNCTION) 309 smp_call_function_interrupt(); 310 311 return IRQ_HANDLED; 312 } 313 314 #endif /* BMIPS type */ 315 316 static void bmips_send_ipi_mask(const struct cpumask *mask, 317 unsigned int action) 318 { 319 unsigned int i; 320 321 for_each_cpu(i, mask) 322 bmips_send_ipi_single(i, action); 323 } 324 325 #ifdef CONFIG_HOTPLUG_CPU 326 327 static int bmips_cpu_disable(void) 328 { 329 unsigned int cpu = smp_processor_id(); 330 331 if (cpu == 0) 332 return -EBUSY; 333 334 pr_info("SMP: CPU%d is offline\n", cpu); 335 336 set_cpu_online(cpu, false); 337 cpu_clear(cpu, cpu_callin_map); 338 339 local_flush_tlb_all(); 340 local_flush_icache_range(0, ~0); 341 342 return 0; 343 } 344 345 static void bmips_cpu_die(unsigned int cpu) 346 { 347 } 348 349 void __ref play_dead(void) 350 { 351 idle_task_exit(); 352 353 /* flush data cache */ 354 _dma_cache_wback_inv(0, ~0); 355 356 /* 357 * Wakeup is on SW0 or SW1; disable everything else 358 * Use BEV !IV (BMIPS_WARM_RESTART_VEC) to avoid the regular Linux 359 * IRQ handlers; this clears ST0_IE and returns immediately. 360 */ 361 clear_c0_cause(CAUSEF_IV | C_SW0 | C_SW1); 362 change_c0_status(IE_IRQ5 | IE_IRQ1 | IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV, 363 IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV); 364 irq_disable_hazard(); 365 366 /* 367 * wait for SW interrupt from bmips_boot_secondary(), then jump 368 * back to start_secondary() 369 */ 370 __asm__ __volatile__( 371 " wait\n" 372 " j bmips_secondary_reentry\n" 373 : : : "memory"); 374 } 375 376 #endif /* CONFIG_HOTPLUG_CPU */ 377 378 struct plat_smp_ops bmips_smp_ops = { 379 .smp_setup = bmips_smp_setup, 380 .prepare_cpus = bmips_prepare_cpus, 381 .boot_secondary = bmips_boot_secondary, 382 .smp_finish = bmips_smp_finish, 383 .init_secondary = bmips_init_secondary, 384 .cpus_done = bmips_cpus_done, 385 .send_ipi_single = bmips_send_ipi_single, 386 .send_ipi_mask = bmips_send_ipi_mask, 387 #ifdef CONFIG_HOTPLUG_CPU 388 .cpu_disable = bmips_cpu_disable, 389 .cpu_die = bmips_cpu_die, 390 #endif 391 }; 392 393 #endif /* CONFIG_SMP */ 394 395 /*********************************************************************** 396 * BMIPS vector relocation 397 * This is primarily used for SMP boot, but it is applicable to some 398 * UP BMIPS systems as well. 399 ***********************************************************************/ 400 401 static void bmips_wr_vec(unsigned long dst, char *start, char *end) 402 { 403 memcpy((void *)dst, start, end - start); 404 dma_cache_wback((unsigned long)start, end - start); 405 local_flush_icache_range(dst, dst + (end - start)); 406 instruction_hazard(); 407 } 408 409 static inline void bmips_nmi_handler_setup(void) 410 { 411 bmips_wr_vec(BMIPS_NMI_RESET_VEC, &bmips_reset_nmi_vec, 412 &bmips_reset_nmi_vec_end); 413 bmips_wr_vec(BMIPS_WARM_RESTART_VEC, &bmips_smp_int_vec, 414 &bmips_smp_int_vec_end); 415 } 416 417 void bmips_ebase_setup(void) 418 { 419 unsigned long new_ebase = ebase; 420 void __iomem __maybe_unused *cbr; 421 422 BUG_ON(ebase != CKSEG0); 423 424 #if defined(CONFIG_CPU_BMIPS4350) 425 /* 426 * BMIPS4350 cannot relocate the normal vectors, but it 427 * can relocate the BEV=1 vectors. So CPU1 starts up at 428 * the relocated BEV=1, IV=0 general exception vector @ 429 * 0xa000_0380. 430 * 431 * set_uncached_handler() is used here because: 432 * - CPU1 will run this from uncached space 433 * - None of the cacheflush functions are set up yet 434 */ 435 set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0, 436 &bmips_smp_int_vec, 0x80); 437 __sync(); 438 return; 439 #elif defined(CONFIG_CPU_BMIPS4380) 440 /* 441 * 0x8000_0000: reset/NMI (initially in kseg1) 442 * 0x8000_0400: normal vectors 443 */ 444 new_ebase = 0x80000400; 445 cbr = BMIPS_GET_CBR(); 446 __raw_writel(0x80080800, cbr + BMIPS_RELO_VECTOR_CONTROL_0); 447 __raw_writel(0xa0080800, cbr + BMIPS_RELO_VECTOR_CONTROL_1); 448 #elif defined(CONFIG_CPU_BMIPS5000) 449 /* 450 * 0x8000_0000: reset/NMI (initially in kseg1) 451 * 0x8000_1000: normal vectors 452 */ 453 new_ebase = 0x80001000; 454 write_c0_brcm_bootvec(0xa0088008); 455 write_c0_ebase(new_ebase); 456 if (max_cpus > 2) 457 bmips_write_zscm_reg(0xa0, 0xa008a008); 458 #else 459 return; 460 #endif 461 board_nmi_handler_setup = &bmips_nmi_handler_setup; 462 ebase = new_ebase; 463 } 464 465 asmlinkage void __weak plat_wired_tlb_setup(void) 466 { 467 /* 468 * Called when starting/restarting a secondary CPU. 469 * Kernel stacks and other important data might only be accessible 470 * once the wired entries are present. 471 */ 472 } 473