1/* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Copyright (C) 1994, 1995 Waldorf Electronics 7 * Written by Ralf Baechle and Andreas Busse 8 * Copyright (C) 1994 - 99, 2003, 06 Ralf Baechle 9 * Copyright (C) 1996 Paul M. Antoine 10 * Modified for DECStation and hence R3000 support by Paul M. Antoine 11 * Further modifications by David S. Miller and Harald Koerfgen 12 * Copyright (C) 1999 Silicon Graphics, Inc. 13 * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com 14 * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. 15 */ 16#include <linux/init.h> 17#include <linux/threads.h> 18 19#include <asm/addrspace.h> 20#include <asm/asm.h> 21#include <asm/asmmacro.h> 22#include <asm/irqflags.h> 23#include <asm/regdef.h> 24#include <asm/pgtable-bits.h> 25#include <asm/mipsregs.h> 26#include <asm/stackframe.h> 27 28#include <kernel-entry-init.h> 29 30 /* 31 * For the moment disable interrupts, mark the kernel mode and 32 * set ST0_KX so that the CPU does not spit fire when using 33 * 64-bit addresses. A full initialization of the CPU's status 34 * register is done later in per_cpu_trap_init(). 35 */ 36 .macro setup_c0_status set clr 37 .set push 38#ifdef CONFIG_MIPS_MT_SMTC 39 /* 40 * For SMTC, we need to set privilege and disable interrupts only for 41 * the current TC, using the TCStatus register. 42 */ 43 mfc0 t0, CP0_TCSTATUS 44 /* Fortunately CU 0 is in the same place in both registers */ 45 /* Set TCU0, TMX, TKSU (for later inversion) and IXMT */ 46 li t1, ST0_CU0 | 0x08001c00 47 or t0, t1 48 /* Clear TKSU, leave IXMT */ 49 xori t0, 0x00001800 50 mtc0 t0, CP0_TCSTATUS 51 _ehb 52 /* We need to leave the global IE bit set, but clear EXL...*/ 53 mfc0 t0, CP0_STATUS 54 or t0, ST0_CU0 | ST0_EXL | ST0_ERL | \set | \clr 55 xor t0, ST0_EXL | ST0_ERL | \clr 56 mtc0 t0, CP0_STATUS 57#else 58 mfc0 t0, CP0_STATUS 59 or t0, ST0_CU0|\set|0x1f|\clr 60 xor t0, 0x1f|\clr 61 mtc0 t0, CP0_STATUS 62 .set noreorder 63 sll zero,3 # ehb 64#endif 65 .set pop 66 .endm 67 68 .macro setup_c0_status_pri 69#ifdef CONFIG_64BIT 70 setup_c0_status ST0_KX 0 71#else 72 setup_c0_status 0 0 73#endif 74 .endm 75 76 .macro setup_c0_status_sec 77#ifdef CONFIG_64BIT 78 setup_c0_status ST0_KX ST0_BEV 79#else 80 setup_c0_status 0 ST0_BEV 81#endif 82 .endm 83 84#ifndef CONFIG_NO_EXCEPT_FILL 85 /* 86 * Reserved space for exception handlers. 87 * Necessary for machines which link their kernels at KSEG0. 88 */ 89 .fill 0x400 90#endif 91 92EXPORT(_stext) 93 94#ifdef CONFIG_BOOT_RAW 95 /* 96 * Give us a fighting chance of running if execution beings at the 97 * kernel load address. This is needed because this platform does 98 * not have a ELF loader yet. 99 */ 100FEXPORT(__kernel_entry) 101 j kernel_entry 102#endif 103 104 __REF 105 106NESTED(kernel_entry, 16, sp) # kernel entry point 107 108 kernel_entry_setup # cpu specific setup 109 110 setup_c0_status_pri 111 112 /* We might not get launched at the address the kernel is linked to, 113 so we jump there. */ 114 PTR_LA t0, 0f 115 jr t0 1160: 117 118#ifdef CONFIG_MIPS_MT_SMTC 119 /* 120 * In SMTC kernel, "CLI" is thread-specific, in TCStatus. 121 * We still need to enable interrupts globally in Status, 122 * and clear EXL/ERL. 123 * 124 * TCContext is used to track interrupt levels under 125 * service in SMTC kernel. Clear for boot TC before 126 * allowing any interrupts. 127 */ 128 mtc0 zero, CP0_TCCONTEXT 129 130 mfc0 t0, CP0_STATUS 131 ori t0, t0, 0xff1f 132 xori t0, t0, 0x001e 133 mtc0 t0, CP0_STATUS 134#endif /* CONFIG_MIPS_MT_SMTC */ 135 136 PTR_LA t0, __bss_start # clear .bss 137 LONG_S zero, (t0) 138 PTR_LA t1, __bss_stop - LONGSIZE 1391: 140 PTR_ADDIU t0, LONGSIZE 141 LONG_S zero, (t0) 142 bne t0, t1, 1b 143 144 LONG_S a0, fw_arg0 # firmware arguments 145 LONG_S a1, fw_arg1 146 LONG_S a2, fw_arg2 147 LONG_S a3, fw_arg3 148 149 MTC0 zero, CP0_CONTEXT # clear context register 150 PTR_LA $28, init_thread_union 151 /* Set the SP after an empty pt_regs. */ 152 PTR_LI sp, _THREAD_SIZE - 32 - PT_SIZE 153 PTR_ADDU sp, $28 154 back_to_back_c0_hazard 155 set_saved_sp sp, t0, t1 156 PTR_SUBU sp, 4 * SZREG # init stack pointer 157 158 j start_kernel 159 END(kernel_entry) 160 161#ifdef CONFIG_SMP 162/* 163 * SMP slave cpus entry point. Board specific code for bootstrap calls this 164 * function after setting up the stack and gp registers. 165 */ 166NESTED(smp_bootstrap, 16, sp) 167#ifdef CONFIG_MIPS_MT_SMTC 168 /* 169 * Read-modify-writes of Status must be atomic, and this 170 * is one case where CLI is invoked without EXL being 171 * necessarily set. The CLI and setup_c0_status will 172 * in fact be redundant for all but the first TC of 173 * each VPE being booted. 174 */ 175 DMT 10 # dmt t2 /* t0, t1 are used by CLI and setup_c0_status() */ 176 jal mips_ihb 177#endif /* CONFIG_MIPS_MT_SMTC */ 178 smp_slave_setup 179 setup_c0_status_sec 180#ifdef CONFIG_MIPS_MT_SMTC 181 andi t2, t2, VPECONTROL_TE 182 beqz t2, 2f 183 EMT # emt 1842: 185#endif /* CONFIG_MIPS_MT_SMTC */ 186 j start_secondary 187 END(smp_bootstrap) 188#endif /* CONFIG_SMP */ 189