xref: /openbmc/linux/arch/mips/kernel/genex.S (revision 2c684d89) 
1/*
2 * This file is subject to the terms and conditions of the GNU General Public
3 * License.  See the file "COPYING" in the main directory of this archive
4 * for more details.
5 *
6 * Copyright (C) 1994 - 2000, 2001, 2003 Ralf Baechle
7 * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
8 * Copyright (C) 2002, 2007  Maciej W. Rozycki
9 * Copyright (C) 2001, 2012 MIPS Technologies, Inc.  All rights reserved.
10 */
11#include <linux/init.h>
12
13#include <asm/asm.h>
14#include <asm/asmmacro.h>
15#include <asm/cacheops.h>
16#include <asm/irqflags.h>
17#include <asm/regdef.h>
18#include <asm/fpregdef.h>
19#include <asm/mipsregs.h>
20#include <asm/stackframe.h>
21#include <asm/war.h>
22#include <asm/thread_info.h>
23
24	__INIT
25
26/*
27 * General exception vector for all other CPUs.
28 *
29 * Be careful when changing this, it has to be at most 128 bytes
30 * to fit into space reserved for the exception handler.
31 */
32NESTED(except_vec3_generic, 0, sp)
33	.set	push
34	.set	noat
35#if R5432_CP0_INTERRUPT_WAR
36	mfc0	k0, CP0_INDEX
37#endif
38	mfc0	k1, CP0_CAUSE
39	andi	k1, k1, 0x7c
40#ifdef CONFIG_64BIT
41	dsll	k1, k1, 1
42#endif
43	PTR_L	k0, exception_handlers(k1)
44	jr	k0
45	.set	pop
46	END(except_vec3_generic)
47
48/*
49 * General exception handler for CPUs with virtual coherency exception.
50 *
51 * Be careful when changing this, it has to be at most 256 (as a special
52 * exception) bytes to fit into space reserved for the exception handler.
53 */
54NESTED(except_vec3_r4000, 0, sp)
55	.set	push
56	.set	arch=r4000
57	.set	noat
58	mfc0	k1, CP0_CAUSE
59	li	k0, 31<<2
60	andi	k1, k1, 0x7c
61	.set	push
62	.set	noreorder
63	.set	nomacro
64	beq	k1, k0, handle_vced
65	 li	k0, 14<<2
66	beq	k1, k0, handle_vcei
67#ifdef CONFIG_64BIT
68	 dsll	k1, k1, 1
69#endif
70	.set	pop
71	PTR_L	k0, exception_handlers(k1)
72	jr	k0
73
74	/*
75	 * Big shit, we now may have two dirty primary cache lines for the same
76	 * physical address.  We can safely invalidate the line pointed to by
77	 * c0_badvaddr because after return from this exception handler the
78	 * load / store will be re-executed.
79	 */
80handle_vced:
81	MFC0	k0, CP0_BADVADDR
82	li	k1, -4					# Is this ...
83	and	k0, k1					# ... really needed?
84	mtc0	zero, CP0_TAGLO
85	cache	Index_Store_Tag_D, (k0)
86	cache	Hit_Writeback_Inv_SD, (k0)
87#ifdef CONFIG_PROC_FS
88	PTR_LA	k0, vced_count
89	lw	k1, (k0)
90	addiu	k1, 1
91	sw	k1, (k0)
92#endif
93	eret
94
95handle_vcei:
96	MFC0	k0, CP0_BADVADDR
97	cache	Hit_Writeback_Inv_SD, (k0)		# also cleans pi
98#ifdef CONFIG_PROC_FS
99	PTR_LA	k0, vcei_count
100	lw	k1, (k0)
101	addiu	k1, 1
102	sw	k1, (k0)
103#endif
104	eret
105	.set	pop
106	END(except_vec3_r4000)
107
108	__FINIT
109
110	.align	5	/* 32 byte rollback region */
111LEAF(__r4k_wait)
112	.set	push
113	.set	noreorder
114	/* start of rollback region */
115	LONG_L	t0, TI_FLAGS($28)
116	nop
117	andi	t0, _TIF_NEED_RESCHED
118	bnez	t0, 1f
119	 nop
120	nop
121	nop
122#ifdef CONFIG_CPU_MICROMIPS
123	nop
124	nop
125	nop
126	nop
127#endif
128	.set	MIPS_ISA_ARCH_LEVEL_RAW
129	wait
130	/* end of rollback region (the region size must be power of two) */
1311:
132	jr	ra
133	nop
134	.set	pop
135	END(__r4k_wait)
136
137	.macro	BUILD_ROLLBACK_PROLOGUE handler
138	FEXPORT(rollback_\handler)
139	.set	push
140	.set	noat
141	MFC0	k0, CP0_EPC
142	PTR_LA	k1, __r4k_wait
143	ori	k0, 0x1f	/* 32 byte rollback region */
144	xori	k0, 0x1f
145	bne	k0, k1, 9f
146	MTC0	k0, CP0_EPC
1479:
148	.set pop
149	.endm
150
151	.align	5
152BUILD_ROLLBACK_PROLOGUE handle_int
153NESTED(handle_int, PT_SIZE, sp)
154#ifdef CONFIG_TRACE_IRQFLAGS
155	/*
156	 * Check to see if the interrupted code has just disabled
157	 * interrupts and ignore this interrupt for now if so.
158	 *
159	 * local_irq_disable() disables interrupts and then calls
160	 * trace_hardirqs_off() to track the state. If an interrupt is taken
161	 * after interrupts are disabled but before the state is updated
162	 * it will appear to restore_all that it is incorrectly returning with
163	 * interrupts disabled
164	 */
165	.set	push
166	.set	noat
167	mfc0	k0, CP0_STATUS
168#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
169	and	k0, ST0_IEP
170	bnez	k0, 1f
171
172	mfc0	k0, CP0_EPC
173	.set	noreorder
174	j	k0
175	rfe
176#else
177	and	k0, ST0_IE
178	bnez	k0, 1f
179
180	eret
181#endif
1821:
183	.set pop
184#endif
185	SAVE_ALL
186	CLI
187	TRACE_IRQS_OFF
188
189	LONG_L	s0, TI_REGS($28)
190	LONG_S	sp, TI_REGS($28)
191	PTR_LA	ra, ret_from_irq
192	PTR_LA  v0, plat_irq_dispatch
193	jr	v0
194#ifdef CONFIG_CPU_MICROMIPS
195	nop
196#endif
197	END(handle_int)
198
199	__INIT
200
201/*
202 * Special interrupt vector for MIPS64 ISA & embedded MIPS processors.
203 * This is a dedicated interrupt exception vector which reduces the
204 * interrupt processing overhead.  The jump instruction will be replaced
205 * at the initialization time.
206 *
207 * Be careful when changing this, it has to be at most 128 bytes
208 * to fit into space reserved for the exception handler.
209 */
210NESTED(except_vec4, 0, sp)
2111:	j	1b			/* Dummy, will be replaced */
212	END(except_vec4)
213
214/*
215 * EJTAG debug exception handler.
216 * The EJTAG debug exception entry point is 0xbfc00480, which
217 * normally is in the boot PROM, so the boot PROM must do an
218 * unconditional jump to this vector.
219 */
220NESTED(except_vec_ejtag_debug, 0, sp)
221	j	ejtag_debug_handler
222#ifdef CONFIG_CPU_MICROMIPS
223	 nop
224#endif
225	END(except_vec_ejtag_debug)
226
227	__FINIT
228
229/*
230 * Vectored interrupt handler.
231 * This prototype is copied to ebase + n*IntCtl.VS and patched
232 * to invoke the handler
233 */
234BUILD_ROLLBACK_PROLOGUE except_vec_vi
235NESTED(except_vec_vi, 0, sp)
236	SAVE_SOME
237	SAVE_AT
238	.set	push
239	.set	noreorder
240	PTR_LA	v1, except_vec_vi_handler
241FEXPORT(except_vec_vi_lui)
242	lui	v0, 0		/* Patched */
243	jr	v1
244FEXPORT(except_vec_vi_ori)
245	 ori	v0, 0		/* Patched */
246	.set	pop
247	END(except_vec_vi)
248EXPORT(except_vec_vi_end)
249
250/*
251 * Common Vectored Interrupt code
252 * Complete the register saves and invoke the handler which is passed in $v0
253 */
254NESTED(except_vec_vi_handler, 0, sp)
255	SAVE_TEMP
256	SAVE_STATIC
257	CLI
258#ifdef CONFIG_TRACE_IRQFLAGS
259	move	s0, v0
260	TRACE_IRQS_OFF
261	move	v0, s0
262#endif
263
264	LONG_L	s0, TI_REGS($28)
265	LONG_S	sp, TI_REGS($28)
266	PTR_LA	ra, ret_from_irq
267	jr	v0
268	END(except_vec_vi_handler)
269
270/*
271 * EJTAG debug exception handler.
272 */
273NESTED(ejtag_debug_handler, PT_SIZE, sp)
274	.set	push
275	.set	noat
276	MTC0	k0, CP0_DESAVE
277	mfc0	k0, CP0_DEBUG
278
279	sll	k0, k0, 30	# Check for SDBBP.
280	bgez	k0, ejtag_return
281
282	PTR_LA	k0, ejtag_debug_buffer
283	LONG_S	k1, 0(k0)
284	SAVE_ALL
285	move	a0, sp
286	jal	ejtag_exception_handler
287	RESTORE_ALL
288	PTR_LA	k0, ejtag_debug_buffer
289	LONG_L	k1, 0(k0)
290
291ejtag_return:
292	MFC0	k0, CP0_DESAVE
293	.set	mips32
294	deret
295	.set pop
296	END(ejtag_debug_handler)
297
298/*
299 * This buffer is reserved for the use of the EJTAG debug
300 * handler.
301 */
302	.data
303EXPORT(ejtag_debug_buffer)
304	.fill	LONGSIZE
305	.previous
306
307	__INIT
308
309/*
310 * NMI debug exception handler for MIPS reference boards.
311 * The NMI debug exception entry point is 0xbfc00000, which
312 * normally is in the boot PROM, so the boot PROM must do a
313 * unconditional jump to this vector.
314 */
315NESTED(except_vec_nmi, 0, sp)
316	j	nmi_handler
317#ifdef CONFIG_CPU_MICROMIPS
318	 nop
319#endif
320	END(except_vec_nmi)
321
322	__FINIT
323
324NESTED(nmi_handler, PT_SIZE, sp)
325	.set	push
326	.set	noat
327	/*
328	 * Clear ERL - restore segment mapping
329	 * Clear BEV - required for page fault exception handler to work
330	 */
331	mfc0	k0, CP0_STATUS
332	ori     k0, k0, ST0_EXL
333	li	k1, ~(ST0_BEV | ST0_ERL)
334	and     k0, k0, k1
335	mtc0    k0, CP0_STATUS
336	_ehb
337	SAVE_ALL
338	move	a0, sp
339	jal	nmi_exception_handler
340	/* nmi_exception_handler never returns */
341	.set	pop
342	END(nmi_handler)
343
344	.macro	__build_clear_none
345	.endm
346
347	.macro	__build_clear_sti
348	TRACE_IRQS_ON
349	STI
350	.endm
351
352	.macro	__build_clear_cli
353	CLI
354	TRACE_IRQS_OFF
355	.endm
356
357	.macro	__build_clear_fpe
358	.set	push
359	/* gas fails to assemble cfc1 for some archs (octeon).*/ \
360	.set	mips1
361	SET_HARDFLOAT
362	cfc1	a1, fcr31
363	.set	pop
364	CLI
365	TRACE_IRQS_OFF
366	.endm
367
368	.macro	__build_clear_msa_fpe
369	_cfcmsa	a1, MSA_CSR
370	CLI
371	TRACE_IRQS_OFF
372	.endm
373
374	.macro	__build_clear_ade
375	MFC0	t0, CP0_BADVADDR
376	PTR_S	t0, PT_BVADDR(sp)
377	KMODE
378	.endm
379
380	.macro	__BUILD_silent exception
381	.endm
382
383	/* Gas tries to parse the PRINT argument as a string containing
384	   string escapes and emits bogus warnings if it believes to
385	   recognize an unknown escape code.  So make the arguments
386	   start with an n and gas will believe \n is ok ...  */
387	.macro	__BUILD_verbose nexception
388	LONG_L	a1, PT_EPC(sp)
389#ifdef CONFIG_32BIT
390	PRINT("Got \nexception at %08lx\012")
391#endif
392#ifdef CONFIG_64BIT
393	PRINT("Got \nexception at %016lx\012")
394#endif
395	.endm
396
397	.macro	__BUILD_count exception
398	LONG_L	t0,exception_count_\exception
399	LONG_ADDIU t0, 1
400	LONG_S	t0,exception_count_\exception
401	.comm	exception_count\exception, 8, 8
402	.endm
403
404	.macro	__BUILD_HANDLER exception handler clear verbose ext
405	.align	5
406	NESTED(handle_\exception, PT_SIZE, sp)
407	.set	noat
408	SAVE_ALL
409	FEXPORT(handle_\exception\ext)
410	__build_clear_\clear
411	.set	at
412	__BUILD_\verbose \exception
413	move	a0, sp
414	PTR_LA	ra, ret_from_exception
415	j	do_\handler
416	END(handle_\exception)
417	.endm
418
419	.macro	BUILD_HANDLER exception handler clear verbose
420	__BUILD_HANDLER \exception \handler \clear \verbose _int
421	.endm
422
423	BUILD_HANDLER adel ade ade silent		/* #4  */
424	BUILD_HANDLER ades ade ade silent		/* #5  */
425	BUILD_HANDLER ibe be cli silent			/* #6  */
426	BUILD_HANDLER dbe be cli silent			/* #7  */
427	BUILD_HANDLER bp bp sti silent			/* #9  */
428	BUILD_HANDLER ri ri sti silent			/* #10 */
429	BUILD_HANDLER cpu cpu sti silent		/* #11 */
430	BUILD_HANDLER ov ov sti silent			/* #12 */
431	BUILD_HANDLER tr tr sti silent			/* #13 */
432	BUILD_HANDLER msa_fpe msa_fpe msa_fpe silent	/* #14 */
433	BUILD_HANDLER fpe fpe fpe silent		/* #15 */
434	BUILD_HANDLER ftlb ftlb none silent		/* #16 */
435	BUILD_HANDLER msa msa sti silent		/* #21 */
436	BUILD_HANDLER mdmx mdmx sti silent		/* #22 */
437#ifdef	CONFIG_HARDWARE_WATCHPOINTS
438	/*
439	 * For watch, interrupts will be enabled after the watch
440	 * registers are read.
441	 */
442	BUILD_HANDLER watch watch cli silent		/* #23 */
443#else
444	BUILD_HANDLER watch watch sti verbose		/* #23 */
445#endif
446	BUILD_HANDLER mcheck mcheck cli verbose		/* #24 */
447	BUILD_HANDLER mt mt sti silent			/* #25 */
448	BUILD_HANDLER dsp dsp sti silent		/* #26 */
449	BUILD_HANDLER reserved reserved sti verbose	/* others */
450
451	.align	5
452	LEAF(handle_ri_rdhwr_vivt)
453	.set	push
454	.set	noat
455	.set	noreorder
456	/* check if TLB contains a entry for EPC */
457	MFC0	k1, CP0_ENTRYHI
458	andi	k1, 0xff	/* ASID_MASK */
459	MFC0	k0, CP0_EPC
460	PTR_SRL k0, _PAGE_SHIFT + 1
461	PTR_SLL k0, _PAGE_SHIFT + 1
462	or	k1, k0
463	MTC0	k1, CP0_ENTRYHI
464	mtc0_tlbw_hazard
465	tlbp
466	tlb_probe_hazard
467	mfc0	k1, CP0_INDEX
468	.set	pop
469	bltz	k1, handle_ri	/* slow path */
470	/* fall thru */
471	END(handle_ri_rdhwr_vivt)
472
473	LEAF(handle_ri_rdhwr)
474	.set	push
475	.set	noat
476	.set	noreorder
477	/* MIPS32:    0x7c03e83b: rdhwr v1,$29 */
478	/* microMIPS: 0x007d6b3c: rdhwr v1,$29 */
479	MFC0	k1, CP0_EPC
480#if defined(CONFIG_CPU_MICROMIPS) || defined(CONFIG_CPU_MIPS32_R2) || defined(CONFIG_CPU_MIPS64_R2)
481	and     k0, k1, 1
482	beqz    k0, 1f
483	xor     k1, k0
484	lhu     k0, (k1)
485	lhu     k1, 2(k1)
486	ins     k1, k0, 16, 16
487	lui     k0, 0x007d
488	b       docheck
489	ori     k0, 0x6b3c
4901:
491	lui     k0, 0x7c03
492	lw      k1, (k1)
493	ori     k0, 0xe83b
494#else
495	andi    k0, k1, 1
496	bnez    k0, handle_ri
497	lui     k0, 0x7c03
498	lw      k1, (k1)
499	ori     k0, 0xe83b
500#endif
501	.set    reorder
502docheck:
503	bne	k0, k1, handle_ri	/* if not ours */
504
505isrdhwr:
506	/* The insn is rdhwr.  No need to check CAUSE.BD here. */
507	get_saved_sp	/* k1 := current_thread_info */
508	.set	noreorder
509	MFC0	k0, CP0_EPC
510#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX)
511	ori	k1, _THREAD_MASK
512	xori	k1, _THREAD_MASK
513	LONG_L	v1, TI_TP_VALUE(k1)
514	LONG_ADDIU	k0, 4
515	jr	k0
516	 rfe
517#else
518#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
519	LONG_ADDIU	k0, 4		/* stall on $k0 */
520#else
521	.set	at=v1
522	LONG_ADDIU	k0, 4
523	.set	noat
524#endif
525	MTC0	k0, CP0_EPC
526	/* I hope three instructions between MTC0 and ERET are enough... */
527	ori	k1, _THREAD_MASK
528	xori	k1, _THREAD_MASK
529	LONG_L	v1, TI_TP_VALUE(k1)
530	.set	arch=r4000
531	eret
532	.set	mips0
533#endif
534	.set	pop
535	END(handle_ri_rdhwr)
536
537#ifdef CONFIG_64BIT
538/* A temporary overflow handler used by check_daddi(). */
539
540	__INIT
541
542	BUILD_HANDLER  daddi_ov daddi_ov none silent	/* #12 */
543#endif
544