xref: /openbmc/linux/arch/mips/jazz/setup.c (revision fd589a8f)
1 /*
2  * Setup pointers to hardware-dependent routines.
3  *
4  * This file is subject to the terms and conditions of the GNU General Public
5  * License.  See the file "COPYING" in the main directory of this archive
6  * for more details.
7  *
8  * Copyright (C) 1996, 1997, 1998, 2001, 07, 08 by Ralf Baechle
9  * Copyright (C) 2001 MIPS Technologies, Inc.
10  * Copyright (C) 2007 by Thomas Bogendoerfer
11  */
12 #include <linux/eisa.h>
13 #include <linux/init.h>
14 #include <linux/ioport.h>
15 #include <linux/console.h>
16 #include <linux/screen_info.h>
17 #include <linux/platform_device.h>
18 #include <linux/serial_8250.h>
19 
20 #include <asm/jazz.h>
21 #include <asm/jazzdma.h>
22 #include <asm/reboot.h>
23 #include <asm/pgtable.h>
24 
25 extern asmlinkage void jazz_handle_int(void);
26 
27 extern void jazz_machine_restart(char *command);
28 
29 static struct resource jazz_io_resources[] = {
30 	{
31 		.start	= 0x00,
32 		.end	= 0x1f,
33 		.name	= "dma1",
34 		.flags	= IORESOURCE_BUSY
35 	}, {
36 		.start	= 0x40,
37 		.end	= 0x5f,
38 		.name	= "timer",
39 		.flags	= IORESOURCE_BUSY
40 	}, {
41 		.start	= 0x80,
42 		.end	= 0x8f,
43 		.name	= "dma page reg",
44 		.flags	= IORESOURCE_BUSY
45 	}, {
46 		.start	= 0xc0,
47 		.end	= 0xdf,
48 		.name	= "dma2",
49 		.flags	= IORESOURCE_BUSY
50 	}
51 };
52 
53 void __init plat_mem_setup(void)
54 {
55 	int i;
56 
57 	/* Map 0xe0000000 -> 0x0:800005C0, 0xe0010000 -> 0x1:30000580 */
58 	add_wired_entry(0x02000017, 0x03c00017, 0xe0000000, PM_64K);
59 	/* Map 0xe2000000 -> 0x0:900005C0, 0xe3010000 -> 0x0:910005C0 */
60 	add_wired_entry(0x02400017, 0x02440017, 0xe2000000, PM_16M);
61 	/* Map 0xe4000000 -> 0x0:600005C0, 0xe4100000 -> 400005C0 */
62 	add_wired_entry(0x01800017, 0x01000017, 0xe4000000, PM_4M);
63 
64 	set_io_port_base(JAZZ_PORT_BASE);
65 #ifdef CONFIG_EISA
66 	EISA_bus = 1;
67 #endif
68 
69 	/* request I/O space for devices used on all i[345]86 PCs */
70 	for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++)
71 		request_resource(&ioport_resource, jazz_io_resources + i);
72 
73 	/* The RTC is outside the port address space */
74 
75 	_machine_restart = jazz_machine_restart;
76 
77 #ifdef CONFIG_VT
78 	screen_info = (struct screen_info) {
79 		0, 0,		/* orig-x, orig-y */
80 		0,		/* unused */
81 		0,		/* orig_video_page */
82 		0,		/* orig_video_mode */
83 		160,		/* orig_video_cols */
84 		0, 0, 0,	/* unused, ega_bx, unused */
85 		64,		/* orig_video_lines */
86 		0,		/* orig_video_isVGA */
87 		16		/* orig_video_points */
88 	};
89 #endif
90 
91 	add_preferred_console("ttyS", 0, "9600");
92 }
93 
94 #ifdef CONFIG_OLIVETTI_M700
95 #define UART_CLK  1843200
96 #else
97 /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know
98    exactly which ones ... XXX */
99 #define UART_CLK (8000000 / 16) /* ( 3072000 / 16) */
100 #endif
101 
102 #define MEMPORT(_base, _irq)				\
103 	{						\
104 		.mapbase	= (_base),		\
105 		.membase	= (void *)(_base),	\
106 		.irq		= (_irq),		\
107 		.uartclk	= UART_CLK,		\
108 		.iotype		= UPIO_MEM,		\
109 		.flags		= UPF_BOOT_AUTOCONF,	\
110 	}
111 
112 static struct plat_serial8250_port jazz_serial_data[] = {
113 	MEMPORT(JAZZ_SERIAL1_BASE, JAZZ_SERIAL1_IRQ),
114 	MEMPORT(JAZZ_SERIAL2_BASE, JAZZ_SERIAL2_IRQ),
115 	{ },
116 };
117 
118 static struct platform_device jazz_serial8250_device = {
119 	.name			= "serial8250",
120 	.id			= PLAT8250_DEV_PLATFORM,
121 	.dev			= {
122 		.platform_data	= jazz_serial_data,
123 	},
124 };
125 
126 static struct resource jazz_esp_rsrc[] = {
127 	{
128 		.start = JAZZ_SCSI_BASE,
129 		.end   = JAZZ_SCSI_BASE + 31,
130 		.flags = IORESOURCE_MEM
131 	},
132 	{
133 		.start = JAZZ_SCSI_DMA,
134 		.end   = JAZZ_SCSI_DMA,
135 		.flags = IORESOURCE_MEM
136 	},
137 	{
138 		.start = JAZZ_SCSI_IRQ,
139 		.end   = JAZZ_SCSI_IRQ,
140 		.flags = IORESOURCE_IRQ
141 	}
142 };
143 
144 static struct platform_device jazz_esp_pdev = {
145 	.name           = "jazz_esp",
146 	.num_resources  = ARRAY_SIZE(jazz_esp_rsrc),
147 	.resource       = jazz_esp_rsrc
148 };
149 
150 static struct resource jazz_sonic_rsrc[] = {
151 	{
152 		.start = JAZZ_ETHERNET_BASE,
153 		.end   = JAZZ_ETHERNET_BASE + 0xff,
154 		.flags = IORESOURCE_MEM
155 	},
156 	{
157 		.start = JAZZ_ETHERNET_IRQ,
158 		.end   = JAZZ_ETHERNET_IRQ,
159 		.flags = IORESOURCE_IRQ
160 	}
161 };
162 
163 static struct platform_device jazz_sonic_pdev = {
164 	.name           = "jazzsonic",
165 	.num_resources  = ARRAY_SIZE(jazz_sonic_rsrc),
166 	.resource       = jazz_sonic_rsrc
167 };
168 
169 static struct resource jazz_cmos_rsrc[] = {
170 	{
171 		.start = 0x70,
172 		.end   = 0x71,
173 		.flags = IORESOURCE_IO
174 	},
175 	{
176 		.start = 8,
177 		.end   = 8,
178 		.flags = IORESOURCE_IRQ
179 	}
180 };
181 
182 static struct platform_device jazz_cmos_pdev = {
183 	.name           = "rtc_cmos",
184 	.num_resources  = ARRAY_SIZE(jazz_cmos_rsrc),
185 	.resource       = jazz_cmos_rsrc
186 };
187 
188 static struct platform_device pcspeaker_pdev = {
189 	.name           = "pcspkr",
190 	.id		= -1,
191 };
192 
193 static int __init jazz_setup_devinit(void)
194 {
195 	platform_device_register(&jazz_serial8250_device);
196 	platform_device_register(&jazz_esp_pdev);
197 	platform_device_register(&jazz_sonic_pdev);
198 	platform_device_register(&jazz_cmos_pdev);
199 	platform_device_register(&pcspeaker_pdev);
200 
201 	return 0;
202 }
203 
204 device_initcall(jazz_setup_devinit);
205