1 /*
2 * Setup pointers to hardware-dependent routines.
3 *
4 * This file is subject to the terms and conditions of the GNU General Public
5 * License. See the file "COPYING" in the main directory of this archive
6 * for more details.
7 *
8 * Copyright (C) 1996, 1997, 1998, 2001, 07, 08 by Ralf Baechle
9 * Copyright (C) 2001 MIPS Technologies, Inc.
10 * Copyright (C) 2007 by Thomas Bogendoerfer
11 */
12 #include <linux/eisa.h>
13 #include <linux/init.h>
14 #include <linux/ioport.h>
15 #include <linux/console.h>
16 #include <linux/screen_info.h>
17 #include <linux/platform_device.h>
18 #include <linux/serial_8250.h>
19 #include <linux/dma-mapping.h>
20 #include <linux/pgtable.h>
21
22 #include <asm/jazz.h>
23 #include <asm/jazzdma.h>
24 #include <asm/reboot.h>
25 #include <asm/tlbmisc.h>
26
27 extern asmlinkage void jazz_handle_int(void);
28
29 extern void jazz_machine_restart(char *command);
30
31 static struct resource jazz_io_resources[] = {
32 {
33 .start = 0x00,
34 .end = 0x1f,
35 .name = "dma1",
36 .flags = IORESOURCE_IO | IORESOURCE_BUSY
37 }, {
38 .start = 0x40,
39 .end = 0x5f,
40 .name = "timer",
41 .flags = IORESOURCE_IO | IORESOURCE_BUSY
42 }, {
43 .start = 0x80,
44 .end = 0x8f,
45 .name = "dma page reg",
46 .flags = IORESOURCE_IO | IORESOURCE_BUSY
47 }, {
48 .start = 0xc0,
49 .end = 0xdf,
50 .name = "dma2",
51 .flags = IORESOURCE_IO | IORESOURCE_BUSY
52 }
53 };
54
plat_mem_setup(void)55 void __init plat_mem_setup(void)
56 {
57 int i;
58
59 /* Map 0xe0000000 -> 0x0:800005C0, 0xe0010000 -> 0x1:30000580 */
60 add_wired_entry(0x02000017, 0x03c00017, 0xe0000000, PM_64K);
61 /* Map 0xe2000000 -> 0x0:900005C0, 0xe3010000 -> 0x0:910005C0 */
62 add_wired_entry(0x02400017, 0x02440017, 0xe2000000, PM_16M);
63 /* Map 0xe4000000 -> 0x0:600005C0, 0xe4100000 -> 400005C0 */
64 add_wired_entry(0x01800017, 0x01000017, 0xe4000000, PM_4M);
65
66 set_io_port_base(JAZZ_PORT_BASE);
67 #ifdef CONFIG_EISA
68 EISA_bus = 1;
69 #endif
70
71 /* request I/O space for devices used on all i[345]86 PCs */
72 for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++)
73 request_resource(&ioport_resource, jazz_io_resources + i);
74
75 /* The RTC is outside the port address space */
76
77 _machine_restart = jazz_machine_restart;
78
79 #ifdef CONFIG_VT
80 screen_info = (struct screen_info) {
81 .orig_video_cols = 160,
82 .orig_video_lines = 64,
83 .orig_video_points = 16,
84 };
85 #endif
86
87 add_preferred_console("ttyS", 0, "9600");
88 }
89
90 #ifdef CONFIG_OLIVETTI_M700
91 #define UART_CLK 1843200
92 #else
93 /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know
94 exactly which ones ... XXX */
95 #define UART_CLK (8000000 / 16) /* ( 3072000 / 16) */
96 #endif
97
98 #define MEMPORT(_base, _irq) \
99 { \
100 .mapbase = (_base), \
101 .membase = (void *)(_base), \
102 .irq = (_irq), \
103 .uartclk = UART_CLK, \
104 .iotype = UPIO_MEM, \
105 .flags = UPF_BOOT_AUTOCONF, \
106 }
107
108 static struct plat_serial8250_port jazz_serial_data[] = {
109 MEMPORT(JAZZ_SERIAL1_BASE, JAZZ_SERIAL1_IRQ),
110 MEMPORT(JAZZ_SERIAL2_BASE, JAZZ_SERIAL2_IRQ),
111 { },
112 };
113
114 static struct platform_device jazz_serial8250_device = {
115 .name = "serial8250",
116 .id = PLAT8250_DEV_PLATFORM,
117 .dev = {
118 .platform_data = jazz_serial_data,
119 },
120 };
121
122 static struct resource jazz_esp_rsrc[] = {
123 {
124 .start = JAZZ_SCSI_BASE,
125 .end = JAZZ_SCSI_BASE + 31,
126 .flags = IORESOURCE_MEM
127 },
128 {
129 .start = JAZZ_SCSI_DMA,
130 .end = JAZZ_SCSI_DMA,
131 .flags = IORESOURCE_MEM
132 },
133 {
134 .start = JAZZ_SCSI_IRQ,
135 .end = JAZZ_SCSI_IRQ,
136 .flags = IORESOURCE_IRQ
137 }
138 };
139
140 static u64 jazz_esp_dma_mask = DMA_BIT_MASK(32);
141
142 static struct platform_device jazz_esp_pdev = {
143 .name = "jazz_esp",
144 .num_resources = ARRAY_SIZE(jazz_esp_rsrc),
145 .resource = jazz_esp_rsrc,
146 .dev = {
147 .dma_mask = &jazz_esp_dma_mask,
148 .coherent_dma_mask = DMA_BIT_MASK(32),
149 }
150 };
151
152 static struct resource jazz_sonic_rsrc[] = {
153 {
154 .start = JAZZ_ETHERNET_BASE,
155 .end = JAZZ_ETHERNET_BASE + 0xff,
156 .flags = IORESOURCE_MEM
157 },
158 {
159 .start = JAZZ_ETHERNET_IRQ,
160 .end = JAZZ_ETHERNET_IRQ,
161 .flags = IORESOURCE_IRQ
162 }
163 };
164
165 static u64 jazz_sonic_dma_mask = DMA_BIT_MASK(32);
166
167 static struct platform_device jazz_sonic_pdev = {
168 .name = "jazzsonic",
169 .num_resources = ARRAY_SIZE(jazz_sonic_rsrc),
170 .resource = jazz_sonic_rsrc,
171 .dev = {
172 .dma_mask = &jazz_sonic_dma_mask,
173 .coherent_dma_mask = DMA_BIT_MASK(32),
174 }
175 };
176
177 static struct resource jazz_cmos_rsrc[] = {
178 {
179 .start = 0x70,
180 .end = 0x71,
181 .flags = IORESOURCE_IO
182 },
183 {
184 .start = 8,
185 .end = 8,
186 .flags = IORESOURCE_IRQ
187 }
188 };
189
190 static struct platform_device jazz_cmos_pdev = {
191 .name = "rtc_cmos",
192 .num_resources = ARRAY_SIZE(jazz_cmos_rsrc),
193 .resource = jazz_cmos_rsrc
194 };
195
196 static struct platform_device pcspeaker_pdev = {
197 .name = "pcspkr",
198 .id = -1,
199 };
200
jazz_setup_devinit(void)201 static int __init jazz_setup_devinit(void)
202 {
203 platform_device_register(&jazz_serial8250_device);
204 platform_device_register(&jazz_esp_pdev);
205 platform_device_register(&jazz_sonic_pdev);
206 platform_device_register(&jazz_cmos_pdev);
207 platform_device_register(&pcspeaker_pdev);
208
209 return 0;
210 }
211
212 device_initcall(jazz_setup_devinit);
213