1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* ********************************************************************* 3 * SB1250 Board Support Package 4 * 5 * Global constants and macros File: sb1250_defs.h 6 * 7 * This file contains macros and definitions used by the other 8 * include files. 9 * 10 * SB1250 specification level: User's manual 1/02/02 11 * 12 ********************************************************************* 13 * 14 * Copyright 2000,2001,2002,2003 15 * Broadcom Corporation. All rights reserved. 16 * 17 ********************************************************************* */ 18 19 #ifndef _SB1250_DEFS_H 20 #define _SB1250_DEFS_H 21 22 /* 23 * These headers require ANSI C89 string concatenation, and GCC or other 24 * 'long long' (64-bit integer) support. 25 */ 26 #if !defined(__STDC__) && !defined(_MSC_VER) 27 #error SiByte headers require ANSI C89 support 28 #endif 29 30 31 /* ********************************************************************* 32 * Macros for feature tests, used to enable include file features 33 * for chip features only present in certain chip revisions. 34 * 35 * SIBYTE_HDR_FEATURES may be defined to be the mask value chip/revision 36 * which is to be exposed by the headers. If undefined, it defaults to 37 * "all features." 38 * 39 * Use like: 40 * 41 * #define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_112x_PASS1 42 * 43 * Generate defines only for that revision of chip. 44 * 45 * #if SIBYTE_HDR_FEATURE(chip,pass) 46 * 47 * True if header features for that revision or later of 48 * that particular chip type are enabled in SIBYTE_HDR_FEATURES. 49 * (Use this to bracket #defines for features present in a given 50 * revision and later.) 51 * 52 * Note that there is no implied ordering between chip types. 53 * 54 * Note also that 'chip' and 'pass' must textually exactly 55 * match the defines below. So, for example, 56 * SIBYTE_HDR_FEATURE(112x, PASS1) is OK, but 57 * SIBYTE_HDR_FEATURE(1120, pass1) is not (for two reasons). 58 * 59 * #if SIBYTE_HDR_FEATURE_UP_TO(chip,pass) 60 * 61 * Same as SIBYTE_HDR_FEATURE, but true for the named revision 62 * and earlier revisions of the named chip type. 63 * 64 * #if SIBYTE_HDR_FEATURE_EXACT(chip,pass) 65 * 66 * Same as SIBYTE_HDR_FEATURE, but only true for the named 67 * revision of the named chip type. (Note that this CANNOT 68 * be used to verify that you're compiling only for that 69 * particular chip/revision. It will be true any time this 70 * chip/revision is included in SIBYTE_HDR_FEATURES.) 71 * 72 * #if SIBYTE_HDR_FEATURE_CHIP(chip) 73 * 74 * True if header features for (any revision of) that chip type 75 * are enabled in SIBYTE_HDR_FEATURES. (Use this to bracket 76 * #defines for features specific to a given chip type.) 77 * 78 * Mask values currently include room for additional revisions of each 79 * chip type, but can be renumbered at will. Note that they MUST fit 80 * into 31 bits and may not include C type constructs, for safe use in 81 * CPP conditionals. Bit positions within chip types DO indicate 82 * ordering, so be careful when adding support for new minor revs. 83 ********************************************************************* */ 84 85 #define SIBYTE_HDR_FMASK_1250_ALL 0x000000ff 86 #define SIBYTE_HDR_FMASK_1250_PASS1 0x00000001 87 #define SIBYTE_HDR_FMASK_1250_PASS2 0x00000002 88 #define SIBYTE_HDR_FMASK_1250_PASS3 0x00000004 89 90 #define SIBYTE_HDR_FMASK_112x_ALL 0x00000f00 91 #define SIBYTE_HDR_FMASK_112x_PASS1 0x00000100 92 93 #define SIBYTE_HDR_FMASK_1480_ALL 0x0000f000 94 #define SIBYTE_HDR_FMASK_1480_PASS1 0x00001000 95 #define SIBYTE_HDR_FMASK_1480_PASS2 0x00002000 96 97 /* Bit mask for chip/revision. (use _ALL for all revisions of a chip). */ 98 #define SIBYTE_HDR_FMASK(chip, pass) \ 99 (SIBYTE_HDR_FMASK_ ## chip ## _ ## pass) 100 #define SIBYTE_HDR_FMASK_ALLREVS(chip) \ 101 (SIBYTE_HDR_FMASK_ ## chip ## _ALL) 102 103 /* Default constant value for all chips, all revisions */ 104 #define SIBYTE_HDR_FMASK_ALL \ 105 (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL \ 106 | SIBYTE_HDR_FMASK_1480_ALL) 107 108 /* This one is used for the "original" BCM1250/BCM112x chips. We use this 109 to weed out constants and macros that do not exist on later chips like 110 the BCM1480 */ 111 #define SIBYTE_HDR_FMASK_1250_112x_ALL \ 112 (SIBYTE_HDR_FMASK_1250_ALL | SIBYTE_HDR_FMASK_112x_ALL) 113 #define SIBYTE_HDR_FMASK_1250_112x SIBYTE_HDR_FMASK_1250_112x_ALL 114 115 #ifndef SIBYTE_HDR_FEATURES 116 #define SIBYTE_HDR_FEATURES SIBYTE_HDR_FMASK_ALL 117 #endif 118 119 120 /* Bit mask for revisions of chip exclusively before the named revision. */ 121 #define SIBYTE_HDR_FMASK_BEFORE(chip, pass) \ 122 ((SIBYTE_HDR_FMASK(chip, pass) - 1) & SIBYTE_HDR_FMASK_ALLREVS(chip)) 123 124 /* Bit mask for revisions of chip exclusively after the named revision. */ 125 #define SIBYTE_HDR_FMASK_AFTER(chip, pass) \ 126 (~(SIBYTE_HDR_FMASK(chip, pass) \ 127 | (SIBYTE_HDR_FMASK(chip, pass) - 1)) & SIBYTE_HDR_FMASK_ALLREVS(chip)) 128 129 130 /* True if header features enabled for (any revision of) that chip type. */ 131 #define SIBYTE_HDR_FEATURE_CHIP(chip) \ 132 (!! (SIBYTE_HDR_FMASK_ALLREVS(chip) & SIBYTE_HDR_FEATURES)) 133 134 /* True for all versions of the BCM1250 and BCM1125, but not true for 135 anything else */ 136 #define SIBYTE_HDR_FEATURE_1250_112x \ 137 (SIBYTE_HDR_FEATURE_CHIP(1250) || SIBYTE_HDR_FEATURE_CHIP(112x)) 138 /* (!! (SIBYTE_HDR_FEATURES & SIBYHTE_HDR_FMASK_1250_112x)) */ 139 140 /* True if header features enabled for that rev or later, inclusive. */ 141 #define SIBYTE_HDR_FEATURE(chip, pass) \ 142 (!! ((SIBYTE_HDR_FMASK(chip, pass) \ 143 | SIBYTE_HDR_FMASK_AFTER(chip, pass)) & SIBYTE_HDR_FEATURES)) 144 145 /* True if header features enabled for exactly that rev. */ 146 #define SIBYTE_HDR_FEATURE_EXACT(chip, pass) \ 147 (!! (SIBYTE_HDR_FMASK(chip, pass) & SIBYTE_HDR_FEATURES)) 148 149 /* True if header features enabled for that rev or before, inclusive. */ 150 #define SIBYTE_HDR_FEATURE_UP_TO(chip, pass) \ 151 (!! ((SIBYTE_HDR_FMASK(chip, pass) \ 152 | SIBYTE_HDR_FMASK_BEFORE(chip, pass)) & SIBYTE_HDR_FEATURES)) 153 154 155 /* ********************************************************************* 156 * Naming schemes for constants in these files: 157 * 158 * M_xxx MASK constant (identifies bits in a register). 159 * For multi-bit fields, all bits in the field will 160 * be set. 161 * 162 * K_xxx "Code" constant (value for data in a multi-bit 163 * field). The value is right justified. 164 * 165 * V_xxx "Value" constant. This is the same as the 166 * corresponding "K_xxx" constant, except it is 167 * shifted to the correct position in the register. 168 * 169 * S_xxx SHIFT constant. This is the number of bits that 170 * a field value (code) needs to be shifted 171 * (towards the left) to put the value in the right 172 * position for the register. 173 * 174 * A_xxx ADDRESS constant. This will be a physical 175 * address. Use the PHYS_TO_K1 macro to generate 176 * a K1SEG address. 177 * 178 * R_xxx RELATIVE offset constant. This is an offset from 179 * an A_xxx constant (usually the first register in 180 * a group). 181 * 182 * G_xxx(X) GET value. This macro obtains a multi-bit field 183 * from a register, masks it, and shifts it to 184 * the bottom of the register (retrieving a K_xxx 185 * value, for example). 186 * 187 * V_xxx(X) VALUE. This macro computes the value of a 188 * K_xxx constant shifted to the correct position 189 * in the register. 190 ********************************************************************* */ 191 192 193 194 195 /* 196 * Cast to 64-bit number. Presumably the syntax is different in 197 * assembly language. 198 * 199 * Note: you'll need to define uint32_t and uint64_t in your headers. 200 */ 201 202 #if !defined(__ASSEMBLY__) 203 #define _SB_MAKE64(x) ((uint64_t)(x)) 204 #define _SB_MAKE32(x) ((uint32_t)(x)) 205 #else 206 #define _SB_MAKE64(x) (x) 207 #define _SB_MAKE32(x) (x) 208 #endif 209 210 211 /* 212 * Make a mask for 1 bit at position 'n' 213 */ 214 215 #define _SB_MAKEMASK1(n) (_SB_MAKE64(1) << _SB_MAKE64(n)) 216 #define _SB_MAKEMASK1_32(n) (_SB_MAKE32(1) << _SB_MAKE32(n)) 217 218 /* 219 * Make a mask for 'v' bits at position 'n' 220 */ 221 222 #define _SB_MAKEMASK(v, n) (_SB_MAKE64((_SB_MAKE64(1)<<(v))-1) << _SB_MAKE64(n)) 223 #define _SB_MAKEMASK_32(v, n) (_SB_MAKE32((_SB_MAKE32(1)<<(v))-1) << _SB_MAKE32(n)) 224 225 /* 226 * Make a value at 'v' at bit position 'n' 227 */ 228 229 #define _SB_MAKEVALUE(v, n) (_SB_MAKE64(v) << _SB_MAKE64(n)) 230 #define _SB_MAKEVALUE_32(v, n) (_SB_MAKE32(v) << _SB_MAKE32(n)) 231 232 #define _SB_GETVALUE(v, n, m) ((_SB_MAKE64(v) & _SB_MAKE64(m)) >> _SB_MAKE64(n)) 233 #define _SB_GETVALUE_32(v, n, m) ((_SB_MAKE32(v) & _SB_MAKE32(m)) >> _SB_MAKE32(n)) 234 235 /* 236 * Macros to read/write on-chip registers 237 * XXX should we do the PHYS_TO_K1 here? 238 */ 239 240 241 #if defined(__mips64) && !defined(__ASSEMBLY__) 242 #define SBWRITECSR(csr, val) *((volatile uint64_t *) PHYS_TO_K1(csr)) = (val) 243 #define SBREADCSR(csr) (*((volatile uint64_t *) PHYS_TO_K1(csr))) 244 #endif /* __ASSEMBLY__ */ 245 246 #endif 247