xref: /openbmc/linux/arch/mips/include/asm/pci.h (revision 4f3db074)
1 /*
2  * This file is subject to the terms and conditions of the GNU General Public
3  * License.  See the file "COPYING" in the main directory of this archive
4  * for more details.
5  */
6 #ifndef _ASM_PCI_H
7 #define _ASM_PCI_H
8 
9 #include <linux/mm.h>
10 
11 #ifdef __KERNEL__
12 
13 /*
14  * This file essentially defines the interface between board
15  * specific PCI code and MIPS common PCI code.	Should potentially put
16  * into include/asm/pci.h file.
17  */
18 
19 #include <linux/ioport.h>
20 #include <linux/of.h>
21 
22 /*
23  * Each pci channel is a top-level PCI bus seem by CPU.	 A machine  with
24  * multiple PCI channels may have multiple PCI host controllers or a
25  * single controller supporting multiple channels.
26  */
27 struct pci_controller {
28 	struct pci_controller *next;
29 	struct pci_bus *bus;
30 	struct device_node *of_node;
31 
32 	struct pci_ops *pci_ops;
33 	struct resource *mem_resource;
34 	unsigned long mem_offset;
35 	struct resource *io_resource;
36 	unsigned long io_offset;
37 	unsigned long io_map_base;
38 	struct resource *busn_resource;
39 	unsigned long busn_offset;
40 
41 	unsigned int index;
42 	/* For compatibility with current (as of July 2003) pciutils
43 	   and XFree86. Eventually will be removed. */
44 	unsigned int need_domain_info;
45 
46 	int iommu;
47 
48 	/* Optional access methods for reading/writing the bus number
49 	   of the PCI controller */
50 	int (*get_busno)(void);
51 	void (*set_busno)(int busno);
52 };
53 
54 /*
55  * Used by boards to register their PCI busses before the actual scanning.
56  */
57 extern void register_pci_controller(struct pci_controller *hose);
58 
59 /*
60  * board supplied pci irq fixup routine
61  */
62 extern int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
63 
64 
65 /* Can be used to override the logic in pci_scan_bus for skipping
66    already-configured bus numbers - to be used for buggy BIOSes
67    or architectures with incomplete PCI setup by the loader */
68 
69 extern unsigned int pcibios_assign_all_busses(void);
70 
71 extern unsigned long PCIBIOS_MIN_IO;
72 extern unsigned long PCIBIOS_MIN_MEM;
73 
74 #define PCIBIOS_MIN_CARDBUS_IO	0x4000
75 
76 extern void pcibios_set_master(struct pci_dev *dev);
77 
78 #define HAVE_PCI_MMAP
79 
80 extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
81 	enum pci_mmap_state mmap_state, int write_combine);
82 
83 #define HAVE_ARCH_PCI_RESOURCE_TO_USER
84 
85 static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
86 		const struct resource *rsrc, resource_size_t *start,
87 		resource_size_t *end)
88 {
89 	phys_addr_t size = resource_size(rsrc);
90 
91 	*start = fixup_bigphys_addr(rsrc->start, size);
92 	*end = rsrc->start + size;
93 }
94 
95 /*
96  * Dynamic DMA mapping stuff.
97  * MIPS has everything mapped statically.
98  */
99 
100 #include <linux/types.h>
101 #include <linux/slab.h>
102 #include <asm/scatterlist.h>
103 #include <linux/string.h>
104 #include <asm/io.h>
105 #include <asm-generic/pci-bridge.h>
106 
107 struct pci_dev;
108 
109 /*
110  * The PCI address space does equal the physical memory address space.	The
111  * networking and block device layers use this boolean for bounce buffer
112  * decisions.  This is set if any hose does not have an IOMMU.
113  */
114 extern unsigned int PCI_DMA_BUS_IS_PHYS;
115 
116 #ifdef CONFIG_PCI
117 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
118 					enum pci_dma_burst_strategy *strat,
119 					unsigned long *strategy_parameter)
120 {
121 	*strat = PCI_DMA_BURST_INFINITY;
122 	*strategy_parameter = ~0UL;
123 }
124 #endif
125 
126 #ifdef CONFIG_PCI_DOMAINS
127 #define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
128 
129 static inline int pci_proc_domain(struct pci_bus *bus)
130 {
131 	struct pci_controller *hose = bus->sysdata;
132 	return hose->need_domain_info;
133 }
134 #endif /* CONFIG_PCI_DOMAINS */
135 
136 #endif /* __KERNEL__ */
137 
138 /* implement the pci_ DMA API in terms of the generic device dma_ one */
139 #include <asm-generic/pci-dma-compat.h>
140 
141 /* Do platform specific device initialization at pci_enable_device() time */
142 extern int pcibios_plat_dev_init(struct pci_dev *dev);
143 
144 /* Chances are this interrupt is wired PC-style ...  */
145 static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
146 {
147 	return channel ? 15 : 14;
148 }
149 
150 extern char * (*pcibios_plat_setup)(char *str);
151 
152 #ifdef CONFIG_OF
153 /* this function parses memory ranges from a device node */
154 extern void pci_load_of_ranges(struct pci_controller *hose,
155 			       struct device_node *node);
156 #else
157 static inline void pci_load_of_ranges(struct pci_controller *hose,
158 				      struct device_node *node) {}
159 #endif
160 
161 #endif /* _ASM_PCI_H */
162