xref: /openbmc/linux/arch/mips/include/asm/octeon/octeon.h (revision 3213486f)
1 /*
2  * This file is subject to the terms and conditions of the GNU General Public
3  * License.  See the file "COPYING" in the main directory of this archive
4  * for more details.
5  *
6  * Copyright (C) 2004-2008 Cavium Networks
7  */
8 #ifndef __ASM_OCTEON_OCTEON_H
9 #define __ASM_OCTEON_OCTEON_H
10 
11 #include <asm/octeon/cvmx.h>
12 #include <asm/bitfield.h>
13 
14 extern uint64_t octeon_bootmem_alloc_range_phys(uint64_t size,
15 						uint64_t alignment,
16 						uint64_t min_addr,
17 						uint64_t max_addr,
18 						int do_locking);
19 extern void *octeon_bootmem_alloc(uint64_t size, uint64_t alignment,
20 				  int do_locking);
21 extern void *octeon_bootmem_alloc_range(uint64_t size, uint64_t alignment,
22 					uint64_t min_addr, uint64_t max_addr,
23 					int do_locking);
24 extern void *octeon_bootmem_alloc_named(uint64_t size, uint64_t alignment,
25 					char *name);
26 extern void *octeon_bootmem_alloc_named_range(uint64_t size, uint64_t min_addr,
27 					      uint64_t max_addr, uint64_t align,
28 					      char *name);
29 extern void *octeon_bootmem_alloc_named_address(uint64_t size, uint64_t address,
30 						char *name);
31 extern int octeon_bootmem_free_named(char *name);
32 extern void octeon_bootmem_lock(void);
33 extern void octeon_bootmem_unlock(void);
34 
35 extern int octeon_is_simulation(void);
36 extern int octeon_is_pci_host(void);
37 extern int octeon_usb_is_ref_clk(void);
38 extern uint64_t octeon_get_clock_rate(void);
39 extern u64 octeon_get_io_clock_rate(void);
40 extern const char *octeon_board_type_string(void);
41 extern const char *octeon_get_pci_interrupts(void);
42 extern int octeon_get_southbridge_interrupt(void);
43 extern int octeon_get_boot_coremask(void);
44 extern int octeon_get_boot_num_arguments(void);
45 extern const char *octeon_get_boot_argument(int arg);
46 extern void octeon_hal_setup_reserved32(void);
47 extern void octeon_user_io_init(void);
48 
49 extern void octeon_init_cvmcount(void);
50 extern void octeon_setup_delays(void);
51 extern void octeon_io_clk_delay(unsigned long);
52 
53 #define OCTEON_ARGV_MAX_ARGS	64
54 #define OCTOEN_SERIAL_LEN	20
55 
56 struct octeon_boot_descriptor {
57 #ifdef __BIG_ENDIAN_BITFIELD
58 	/* Start of block referenced by assembly code - do not change! */
59 	uint32_t desc_version;
60 	uint32_t desc_size;
61 	uint64_t stack_top;
62 	uint64_t heap_base;
63 	uint64_t heap_end;
64 	/* Only used by bootloader */
65 	uint64_t entry_point;
66 	uint64_t desc_vaddr;
67 	/* End of This block referenced by assembly code - do not change! */
68 	uint32_t exception_base_addr;
69 	uint32_t stack_size;
70 	uint32_t heap_size;
71 	/* Argc count for application. */
72 	uint32_t argc;
73 	uint32_t argv[OCTEON_ARGV_MAX_ARGS];
74 
75 #define	 BOOT_FLAG_INIT_CORE		(1 << 0)
76 #define	 OCTEON_BL_FLAG_DEBUG		(1 << 1)
77 #define	 OCTEON_BL_FLAG_NO_MAGIC	(1 << 2)
78 	/* If set, use uart1 for console */
79 #define	 OCTEON_BL_FLAG_CONSOLE_UART1	(1 << 3)
80 	/* If set, use PCI console */
81 #define	 OCTEON_BL_FLAG_CONSOLE_PCI	(1 << 4)
82 	/* Call exit on break on serial port */
83 #define	 OCTEON_BL_FLAG_BREAK		(1 << 5)
84 
85 	uint32_t flags;
86 	uint32_t core_mask;
87 	/* DRAM size in megabyes. */
88 	uint32_t dram_size;
89 	/* physical address of free memory descriptor block. */
90 	uint32_t phy_mem_desc_addr;
91 	/* used to pass flags from app to debugger. */
92 	uint32_t debugger_flags_base_addr;
93 	/* CPU clock speed, in hz. */
94 	uint32_t eclock_hz;
95 	/* DRAM clock speed, in hz. */
96 	uint32_t dclock_hz;
97 	/* SPI4 clock in hz. */
98 	uint32_t spi_clock_hz;
99 	uint16_t board_type;
100 	uint8_t board_rev_major;
101 	uint8_t board_rev_minor;
102 	uint16_t chip_type;
103 	uint8_t chip_rev_major;
104 	uint8_t chip_rev_minor;
105 	char board_serial_number[OCTOEN_SERIAL_LEN];
106 	uint8_t mac_addr_base[6];
107 	uint8_t mac_addr_count;
108 	uint64_t cvmx_desc_vaddr;
109 #else
110 	uint32_t desc_size;
111 	uint32_t desc_version;
112 	uint64_t stack_top;
113 	uint64_t heap_base;
114 	uint64_t heap_end;
115 	/* Only used by bootloader */
116 	uint64_t entry_point;
117 	uint64_t desc_vaddr;
118 	/* End of This block referenced by assembly code - do not change! */
119 	uint32_t stack_size;
120 	uint32_t exception_base_addr;
121 	uint32_t argc;
122 	uint32_t heap_size;
123 	/*
124 	 * Argc count for application.
125 	 * Warning low bit scrambled in little-endian.
126 	 */
127 	uint32_t argv[OCTEON_ARGV_MAX_ARGS];
128 
129 #define  BOOT_FLAG_INIT_CORE		(1 << 0)
130 #define  OCTEON_BL_FLAG_DEBUG		(1 << 1)
131 #define  OCTEON_BL_FLAG_NO_MAGIC	(1 << 2)
132 	/* If set, use uart1 for console */
133 #define  OCTEON_BL_FLAG_CONSOLE_UART1	(1 << 3)
134 	/* If set, use PCI console */
135 #define  OCTEON_BL_FLAG_CONSOLE_PCI	(1 << 4)
136 	/* Call exit on break on serial port */
137 #define  OCTEON_BL_FLAG_BREAK		(1 << 5)
138 
139 	uint32_t core_mask;
140 	uint32_t flags;
141 	/* physical address of free memory descriptor block. */
142 	uint32_t phy_mem_desc_addr;
143 	/* DRAM size in megabyes. */
144 	uint32_t dram_size;
145 	/* CPU clock speed, in hz. */
146 	uint32_t eclock_hz;
147 	/* used to pass flags from app to debugger. */
148 	uint32_t debugger_flags_base_addr;
149 	/* SPI4 clock in hz. */
150 	uint32_t spi_clock_hz;
151 	/* DRAM clock speed, in hz. */
152 	uint32_t dclock_hz;
153 	uint8_t chip_rev_minor;
154 	uint8_t chip_rev_major;
155 	uint16_t chip_type;
156 	uint8_t board_rev_minor;
157 	uint8_t board_rev_major;
158 	uint16_t board_type;
159 
160 	uint64_t unused1[4]; /* Not even filled in by bootloader. */
161 
162 	uint64_t cvmx_desc_vaddr;
163 #endif
164 };
165 
166 union octeon_cvmemctl {
167 	uint64_t u64;
168 	struct {
169 		/* RO 1 = BIST fail, 0 = BIST pass */
170 		__BITFIELD_FIELD(uint64_t tlbbist:1,
171 		/* RO 1 = BIST fail, 0 = BIST pass */
172 		__BITFIELD_FIELD(uint64_t l1cbist:1,
173 		/* RO 1 = BIST fail, 0 = BIST pass */
174 		__BITFIELD_FIELD(uint64_t l1dbist:1,
175 		/* RO 1 = BIST fail, 0 = BIST pass */
176 		__BITFIELD_FIELD(uint64_t dcmbist:1,
177 		/* RO 1 = BIST fail, 0 = BIST pass */
178 		__BITFIELD_FIELD(uint64_t ptgbist:1,
179 		/* RO 1 = BIST fail, 0 = BIST pass */
180 		__BITFIELD_FIELD(uint64_t wbfbist:1,
181 		/* Reserved */
182 		__BITFIELD_FIELD(uint64_t reserved:17,
183 		/* OCTEON II - TLB replacement policy: 0 = bitmask LRU; 1 = NLU.
184 		 * This field selects between the TLB replacement policies:
185 		 * bitmask LRU or NLU. Bitmask LRU maintains a mask of
186 		 * recently used TLB entries and avoids them as new entries
187 		 * are allocated. NLU simply guarantees that the next
188 		 * allocation is not the last used TLB entry. */
189 		__BITFIELD_FIELD(uint64_t tlbnlu:1,
190 		/* OCTEON II - Selects the bit in the counter used for
191 		 * releasing a PAUSE. This counter trips every 2(8+PAUSETIME)
192 		 * cycles. If not already released, the cnMIPS II core will
193 		 * always release a given PAUSE instruction within
194 		 * 2(8+PAUSETIME). If the counter trip happens to line up,
195 		 * the cnMIPS II core may release the PAUSE instantly. */
196 		__BITFIELD_FIELD(uint64_t pausetime:3,
197 		/* OCTEON II - This field is an extension of
198 		 * CvmMemCtl[DIDTTO] */
199 		__BITFIELD_FIELD(uint64_t didtto2:1,
200 		/* R/W If set, marked write-buffer entries time out
201 		 * the same as as other entries; if clear, marked
202 		 * write-buffer entries use the maximum timeout. */
203 		__BITFIELD_FIELD(uint64_t dismarkwblongto:1,
204 		/* R/W If set, a merged store does not clear the
205 		 * write-buffer entry timeout state. */
206 		__BITFIELD_FIELD(uint64_t dismrgclrwbto:1,
207 		/* R/W Two bits that are the MSBs of the resultant
208 		 * CVMSEG LM word location for an IOBDMA. The other 8
209 		 * bits come from the SCRADDR field of the IOBDMA. */
210 		__BITFIELD_FIELD(uint64_t iobdmascrmsb:2,
211 		/* R/W If set, SYNCWS and SYNCS only order marked
212 		 * stores; if clear, SYNCWS and SYNCS only order
213 		 * unmarked stores. SYNCWSMARKED has no effect when
214 		 * DISSYNCWS is set. */
215 		__BITFIELD_FIELD(uint64_t syncwsmarked:1,
216 		/* R/W If set, SYNCWS acts as SYNCW and SYNCS acts as
217 		 * SYNC. */
218 		__BITFIELD_FIELD(uint64_t dissyncws:1,
219 		/* R/W If set, no stall happens on write buffer
220 		 * full. */
221 		__BITFIELD_FIELD(uint64_t diswbfst:1,
222 		/* R/W If set (and SX set), supervisor-level
223 		 * loads/stores can use XKPHYS addresses with
224 		 * VA<48>==0 */
225 		__BITFIELD_FIELD(uint64_t xkmemenas:1,
226 		/* R/W If set (and UX set), user-level loads/stores
227 		 * can use XKPHYS addresses with VA<48>==0 */
228 		__BITFIELD_FIELD(uint64_t xkmemenau:1,
229 		/* R/W If set (and SX set), supervisor-level
230 		 * loads/stores can use XKPHYS addresses with
231 		 * VA<48>==1 */
232 		__BITFIELD_FIELD(uint64_t xkioenas:1,
233 		/* R/W If set (and UX set), user-level loads/stores
234 		 * can use XKPHYS addresses with VA<48>==1 */
235 		__BITFIELD_FIELD(uint64_t xkioenau:1,
236 		/* R/W If set, all stores act as SYNCW (NOMERGE must
237 		 * be set when this is set) RW, reset to 0. */
238 		__BITFIELD_FIELD(uint64_t allsyncw:1,
239 		/* R/W If set, no stores merge, and all stores reach
240 		 * the coherent bus in order. */
241 		__BITFIELD_FIELD(uint64_t nomerge:1,
242 		/* R/W Selects the bit in the counter used for DID
243 		 * time-outs 0 = 231, 1 = 230, 2 = 229, 3 =
244 		 * 214. Actual time-out is between 1x and 2x this
245 		 * interval. For example, with DIDTTO=3, expiration
246 		 * interval is between 16K and 32K. */
247 		__BITFIELD_FIELD(uint64_t didtto:2,
248 		/* R/W If set, the (mem) CSR clock never turns off. */
249 		__BITFIELD_FIELD(uint64_t csrckalwys:1,
250 		/* R/W If set, mclk never turns off. */
251 		__BITFIELD_FIELD(uint64_t mclkalwys:1,
252 		/* R/W Selects the bit in the counter used for write
253 		 * buffer flush time-outs (WBFLT+11) is the bit
254 		 * position in an internal counter used to determine
255 		 * expiration. The write buffer expires between 1x and
256 		 * 2x this interval. For example, with WBFLT = 0, a
257 		 * write buffer expires between 2K and 4K cycles after
258 		 * the write buffer entry is allocated. */
259 		__BITFIELD_FIELD(uint64_t wbfltime:3,
260 		/* R/W If set, do not put Istream in the L2 cache. */
261 		__BITFIELD_FIELD(uint64_t istrnol2:1,
262 		/* R/W The write buffer threshold. */
263 		__BITFIELD_FIELD(uint64_t wbthresh:4,
264 		/* Reserved */
265 		__BITFIELD_FIELD(uint64_t reserved2:2,
266 		/* R/W If set, CVMSEG is available for loads/stores in
267 		 * kernel/debug mode. */
268 		__BITFIELD_FIELD(uint64_t cvmsegenak:1,
269 		/* R/W If set, CVMSEG is available for loads/stores in
270 		 * supervisor mode. */
271 		__BITFIELD_FIELD(uint64_t cvmsegenas:1,
272 		/* R/W If set, CVMSEG is available for loads/stores in
273 		 * user mode. */
274 		__BITFIELD_FIELD(uint64_t cvmsegenau:1,
275 		/* R/W Size of local memory in cache blocks, 54 (6912
276 		 * bytes) is max legal value. */
277 		__BITFIELD_FIELD(uint64_t lmemsz:6,
278 		;)))))))))))))))))))))))))))))))))
279 	} s;
280 };
281 
282 extern void octeon_check_cpu_bist(void);
283 
284 int octeon_prune_device_tree(void);
285 extern const char __appended_dtb;
286 extern const char __dtb_octeon_3xxx_begin;
287 extern const char __dtb_octeon_68xx_begin;
288 
289 /**
290  * Write a 32bit value to the Octeon NPI register space
291  *
292  * @address: Address to write to
293  * @val:     Value to write
294  */
295 static inline void octeon_npi_write32(uint64_t address, uint32_t val)
296 {
297 	cvmx_write64_uint32(address ^ 4, val);
298 	cvmx_read64_uint32(address ^ 4);
299 }
300 
301 #ifdef CONFIG_SMP
302 void octeon_setup_smp(void);
303 #else
304 static inline void octeon_setup_smp(void) {}
305 #endif
306 
307 struct irq_domain;
308 struct device_node;
309 struct irq_data;
310 struct irq_chip;
311 void octeon_ciu3_mbox_send(int cpu, unsigned int mbox);
312 int octeon_irq_ciu3_xlat(struct irq_domain *d,
313 			 struct device_node *node,
314 			 const u32 *intspec,
315 			 unsigned int intsize,
316 			 unsigned long *out_hwirq,
317 			 unsigned int *out_type);
318 void octeon_irq_ciu3_enable(struct irq_data *data);
319 void octeon_irq_ciu3_disable(struct irq_data *data);
320 void octeon_irq_ciu3_ack(struct irq_data *data);
321 void octeon_irq_ciu3_mask(struct irq_data *data);
322 void octeon_irq_ciu3_mask_ack(struct irq_data *data);
323 int octeon_irq_ciu3_mapx(struct irq_domain *d, unsigned int virq,
324 			 irq_hw_number_t hw, struct irq_chip *chip);
325 
326 /* Octeon multiplier save/restore routines from octeon_switch.S */
327 void octeon_mult_save(void);
328 void octeon_mult_restore(void);
329 void octeon_mult_save_end(void);
330 void octeon_mult_restore_end(void);
331 void octeon_mult_save3(void);
332 void octeon_mult_save3_end(void);
333 void octeon_mult_save2(void);
334 void octeon_mult_save2_end(void);
335 void octeon_mult_restore3(void);
336 void octeon_mult_restore3_end(void);
337 void octeon_mult_restore2(void);
338 void octeon_mult_restore2_end(void);
339 
340 /**
341  * Read a 32bit value from the Octeon NPI register space
342  *
343  * @address: Address to read
344  * Returns The result
345  */
346 static inline uint32_t octeon_npi_read32(uint64_t address)
347 {
348 	return cvmx_read64_uint32(address ^ 4);
349 }
350 
351 extern struct cvmx_bootinfo *octeon_bootinfo;
352 
353 extern uint64_t octeon_bootloader_entry_addr;
354 
355 extern void (*octeon_irq_setup_secondary)(void);
356 
357 typedef void (*octeon_irq_ip4_handler_t)(void);
358 void octeon_irq_set_ip4_handler(octeon_irq_ip4_handler_t);
359 
360 extern void octeon_fixup_irqs(void);
361 
362 extern struct semaphore octeon_bootbus_sem;
363 
364 struct irq_domain *octeon_irq_get_block_domain(int node, uint8_t block);
365 
366 #endif /* __ASM_OCTEON_OCTEON_H */
367