1 /***********************license start***************
2  * Author: Cavium Networks
3  *
4  * Contact: support@caviumnetworks.com
5  * This file is part of the OCTEON SDK
6  *
7  * Copyright (c) 2003-2008 Cavium Networks
8  *
9  * This file is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License, Version 2, as
11  * published by the Free Software Foundation.
12  *
13  * This file is distributed in the hope that it will be useful, but
14  * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
15  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
16  * NONINFRINGEMENT.  See the GNU General Public License for more
17  * details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this file; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22  * or visit http://www.gnu.org/licenses/.
23  *
24  * This file may also be available under a different license from Cavium.
25  * Contact Cavium Networks for more information
26  ***********************license end**************************************/
27 
28 /**
29  * Interface to the hardware Packet Order / Work unit.
30  *
31  * New, starting with SDK 1.7.0, cvmx-pow supports a number of
32  * extended consistency checks. The define
33  * CVMX_ENABLE_POW_CHECKS controls the runtime insertion of POW
34  * internal state checks to find common programming errors. If
35  * CVMX_ENABLE_POW_CHECKS is not defined, checks are by default
36  * enabled. For example, cvmx-pow will check for the following
37  * program errors or POW state inconsistency.
38  * - Requesting a POW operation with an active tag switch in
39  *   progress.
40  * - Waiting for a tag switch to complete for an excessively
41  *   long period. This is normally a sign of an error in locking
42  *   causing deadlock.
43  * - Illegal tag switches from NULL_NULL.
44  * - Illegal tag switches from NULL.
45  * - Illegal deschedule request.
46  * - WQE pointer not matching the one attached to the core by
47  *   the POW.
48  *
49  */
50 
51 #ifndef __CVMX_POW_H__
52 #define __CVMX_POW_H__
53 
54 #include <asm/octeon/cvmx-pow-defs.h>
55 
56 #include <asm/octeon/cvmx-scratch.h>
57 #include <asm/octeon/cvmx-wqe.h>
58 
59 /* Default to having all POW constancy checks turned on */
60 #ifndef CVMX_ENABLE_POW_CHECKS
61 #define CVMX_ENABLE_POW_CHECKS 1
62 #endif
63 
64 enum cvmx_pow_tag_type {
65 	/* Tag ordering is maintained */
66 	CVMX_POW_TAG_TYPE_ORDERED   = 0L,
67 	/* Tag ordering is maintained, and at most one PP has the tag */
68 	CVMX_POW_TAG_TYPE_ATOMIC    = 1L,
69 	/*
70 	 * The work queue entry from the order - NEVER tag switch from
71 	 * NULL to NULL
72 	 */
73 	CVMX_POW_TAG_TYPE_NULL	    = 2L,
74 	/* A tag switch to NULL, and there is no space reserved in POW
75 	 * - NEVER tag switch to NULL_NULL
76 	 * - NEVER tag switch from NULL_NULL
77 	 * - NULL_NULL is entered at the beginning of time and on a deschedule.
78 	 * - NULL_NULL can be exited by a new work request. A NULL_SWITCH
79 	 * load can also switch the state to NULL
80 	 */
81 	CVMX_POW_TAG_TYPE_NULL_NULL = 3L
82 };
83 
84 /**
85  * Wait flag values for pow functions.
86  */
87 typedef enum {
88 	CVMX_POW_WAIT = 1,
89 	CVMX_POW_NO_WAIT = 0,
90 } cvmx_pow_wait_t;
91 
92 /**
93  *  POW tag operations.	 These are used in the data stored to the POW.
94  */
95 typedef enum {
96 	/*
97 	 * switch the tag (only) for this PP
98 	 * - the previous tag should be non-NULL in this case
99 	 * - tag switch response required
100 	 * - fields used: op, type, tag
101 	 */
102 	CVMX_POW_TAG_OP_SWTAG = 0L,
103 	/*
104 	 * switch the tag for this PP, with full information
105 	 * - this should be used when the previous tag is NULL
106 	 * - tag switch response required
107 	 * - fields used: address, op, grp, type, tag
108 	 */
109 	CVMX_POW_TAG_OP_SWTAG_FULL = 1L,
110 	/*
111 	 * switch the tag (and/or group) for this PP and de-schedule
112 	 * - OK to keep the tag the same and only change the group
113 	 * - fields used: op, no_sched, grp, type, tag
114 	 */
115 	CVMX_POW_TAG_OP_SWTAG_DESCH = 2L,
116 	/*
117 	 * just de-schedule
118 	 * - fields used: op, no_sched
119 	 */
120 	CVMX_POW_TAG_OP_DESCH = 3L,
121 	/*
122 	 * create an entirely new work queue entry
123 	 * - fields used: address, op, qos, grp, type, tag
124 	 */
125 	CVMX_POW_TAG_OP_ADDWQ = 4L,
126 	/*
127 	 * just update the work queue pointer and grp for this PP
128 	 * - fields used: address, op, grp
129 	 */
130 	CVMX_POW_TAG_OP_UPDATE_WQP_GRP = 5L,
131 	/*
132 	 * set the no_sched bit on the de-schedule list
133 	 *
134 	 * - does nothing if the selected entry is not on the
135 	 *   de-schedule list
136 	 *
137 	 * - does nothing if the stored work queue pointer does not
138 	 *   match the address field
139 	 *
140 	 * - fields used: address, index, op
141 	 *
142 	 *  Before issuing a *_NSCHED operation, SW must guarantee
143 	 *  that all prior deschedules and set/clr NSCHED operations
144 	 *  are complete and all prior switches are complete. The
145 	 *  hardware provides the opsdone bit and swdone bit for SW
146 	 *  polling. After issuing a *_NSCHED operation, SW must
147 	 *  guarantee that the set/clr NSCHED is complete before any
148 	 *  subsequent operations.
149 	 */
150 	CVMX_POW_TAG_OP_SET_NSCHED = 6L,
151 	/*
152 	 * clears the no_sched bit on the de-schedule list
153 	 *
154 	 * - does nothing if the selected entry is not on the
155 	 *   de-schedule list
156 	 *
157 	 * - does nothing if the stored work queue pointer does not
158 	 *   match the address field
159 	 *
160 	 * - fields used: address, index, op
161 	 *
162 	 * Before issuing a *_NSCHED operation, SW must guarantee that
163 	 * all prior deschedules and set/clr NSCHED operations are
164 	 * complete and all prior switches are complete. The hardware
165 	 * provides the opsdone bit and swdone bit for SW
166 	 * polling. After issuing a *_NSCHED operation, SW must
167 	 * guarantee that the set/clr NSCHED is complete before any
168 	 * subsequent operations.
169 	 */
170 	CVMX_POW_TAG_OP_CLR_NSCHED = 7L,
171 	/* do nothing */
172 	CVMX_POW_TAG_OP_NOP = 15L
173 } cvmx_pow_tag_op_t;
174 
175 /**
176  * This structure defines the store data on a store to POW
177  */
178 typedef union {
179 	uint64_t u64;
180 	struct {
181 #ifdef __BIG_ENDIAN_BITFIELD
182 		/*
183 		 * Don't reschedule this entry. no_sched is used for
184 		 * CVMX_POW_TAG_OP_SWTAG_DESCH and
185 		 * CVMX_POW_TAG_OP_DESCH
186 		 */
187 		uint64_t no_sched:1;
188 		uint64_t unused:2;
189 		/* Tontains index of entry for a CVMX_POW_TAG_OP_*_NSCHED */
190 		uint64_t index:13;
191 		/* The operation to perform */
192 		cvmx_pow_tag_op_t op:4;
193 		uint64_t unused2:2;
194 		/*
195 		 * The QOS level for the packet. qos is only used for
196 		 * CVMX_POW_TAG_OP_ADDWQ
197 		 */
198 		uint64_t qos:3;
199 		/*
200 		 * The group that the work queue entry will be
201 		 * scheduled to grp is used for CVMX_POW_TAG_OP_ADDWQ,
202 		 * CVMX_POW_TAG_OP_SWTAG_FULL,
203 		 * CVMX_POW_TAG_OP_SWTAG_DESCH, and
204 		 * CVMX_POW_TAG_OP_UPDATE_WQP_GRP
205 		 */
206 		uint64_t grp:4;
207 		/*
208 		 * The type of the tag. type is used for everything
209 		 * except CVMX_POW_TAG_OP_DESCH,
210 		 * CVMX_POW_TAG_OP_UPDATE_WQP_GRP, and
211 		 * CVMX_POW_TAG_OP_*_NSCHED
212 		 */
213 		uint64_t type:3;
214 		/*
215 		 * The actual tag. tag is used for everything except
216 		 * CVMX_POW_TAG_OP_DESCH,
217 		 * CVMX_POW_TAG_OP_UPDATE_WQP_GRP, and
218 		 * CVMX_POW_TAG_OP_*_NSCHED
219 		 */
220 		uint64_t tag:32;
221 #else
222 		uint64_t tag:32;
223 		uint64_t type:3;
224 		uint64_t grp:4;
225 		uint64_t qos:3;
226 		uint64_t unused2:2;
227 		cvmx_pow_tag_op_t op:4;
228 		uint64_t index:13;
229 		uint64_t unused:2;
230 		uint64_t no_sched:1;
231 #endif
232 	} s;
233 } cvmx_pow_tag_req_t;
234 
235 /**
236  * This structure describes the address to load stuff from POW
237  */
238 typedef union {
239 	uint64_t u64;
240 
241     /**
242      * Address for new work request loads (did<2:0> == 0)
243      */
244 	struct {
245 #ifdef __BIG_ENDIAN_BITFIELD
246 		/* Mips64 address region. Should be CVMX_IO_SEG */
247 		uint64_t mem_region:2;
248 		/* Must be zero */
249 		uint64_t reserved_49_61:13;
250 		/* Must be one */
251 		uint64_t is_io:1;
252 		/* the ID of POW -- did<2:0> == 0 in this case */
253 		uint64_t did:8;
254 		/* Must be zero */
255 		uint64_t reserved_4_39:36;
256 		/*
257 		 * If set, don't return load response until work is
258 		 * available.
259 		 */
260 		uint64_t wait:1;
261 		/* Must be zero */
262 		uint64_t reserved_0_2:3;
263 #else
264 		uint64_t reserved_0_2:3;
265 		uint64_t wait:1;
266 		uint64_t reserved_4_39:36;
267 		uint64_t did:8;
268 		uint64_t is_io:1;
269 		uint64_t reserved_49_61:13;
270 		uint64_t mem_region:2;
271 #endif
272 	} swork;
273 
274     /**
275      * Address for loads to get POW internal status
276      */
277 	struct {
278 #ifdef __BIG_ENDIAN_BITFIELD
279 		/* Mips64 address region. Should be CVMX_IO_SEG */
280 		uint64_t mem_region:2;
281 		/* Must be zero */
282 		uint64_t reserved_49_61:13;
283 		/* Must be one */
284 		uint64_t is_io:1;
285 		/* the ID of POW -- did<2:0> == 1 in this case */
286 		uint64_t did:8;
287 		/* Must be zero */
288 		uint64_t reserved_10_39:30;
289 		/* The core id to get status for */
290 		uint64_t coreid:4;
291 		/*
292 		 * If set and get_cur is set, return reverse tag-list
293 		 * pointer rather than forward tag-list pointer.
294 		 */
295 		uint64_t get_rev:1;
296 		/*
297 		 * If set, return current status rather than pending
298 		 * status.
299 		 */
300 		uint64_t get_cur:1;
301 		/*
302 		 * If set, get the work-queue pointer rather than
303 		 * tag/type.
304 		 */
305 		uint64_t get_wqp:1;
306 		/* Must be zero */
307 		uint64_t reserved_0_2:3;
308 #else
309 		uint64_t reserved_0_2:3;
310 		uint64_t get_wqp:1;
311 		uint64_t get_cur:1;
312 		uint64_t get_rev:1;
313 		uint64_t coreid:4;
314 		uint64_t reserved_10_39:30;
315 		uint64_t did:8;
316 		uint64_t is_io:1;
317 		uint64_t reserved_49_61:13;
318 		uint64_t mem_region:2;
319 #endif
320 	} sstatus;
321 
322     /**
323      * Address for memory loads to get POW internal state
324      */
325 	struct {
326 #ifdef __BIG_ENDIAN_BITFIELD
327 		/* Mips64 address region. Should be CVMX_IO_SEG */
328 		uint64_t mem_region:2;
329 		/* Must be zero */
330 		uint64_t reserved_49_61:13;
331 		/* Must be one */
332 		uint64_t is_io:1;
333 		/* the ID of POW -- did<2:0> == 2 in this case */
334 		uint64_t did:8;
335 		/* Must be zero */
336 		uint64_t reserved_16_39:24;
337 		/* POW memory index */
338 		uint64_t index:11;
339 		/*
340 		 * If set, return deschedule information rather than
341 		 * the standard response for work-queue index (invalid
342 		 * if the work-queue entry is not on the deschedule
343 		 * list).
344 		 */
345 		uint64_t get_des:1;
346 		/*
347 		 * If set, get the work-queue pointer rather than
348 		 * tag/type (no effect when get_des set).
349 		 */
350 		uint64_t get_wqp:1;
351 		/* Must be zero */
352 		uint64_t reserved_0_2:3;
353 #else
354 		uint64_t reserved_0_2:3;
355 		uint64_t get_wqp:1;
356 		uint64_t get_des:1;
357 		uint64_t index:11;
358 		uint64_t reserved_16_39:24;
359 		uint64_t did:8;
360 		uint64_t is_io:1;
361 		uint64_t reserved_49_61:13;
362 		uint64_t mem_region:2;
363 #endif
364 	} smemload;
365 
366     /**
367      * Address for index/pointer loads
368      */
369 	struct {
370 #ifdef __BIG_ENDIAN_BITFIELD
371 		/* Mips64 address region. Should be CVMX_IO_SEG */
372 		uint64_t mem_region:2;
373 		/* Must be zero */
374 		uint64_t reserved_49_61:13;
375 		/* Must be one */
376 		uint64_t is_io:1;
377 		/* the ID of POW -- did<2:0> == 3 in this case */
378 		uint64_t did:8;
379 		/* Must be zero */
380 		uint64_t reserved_9_39:31;
381 		/*
382 		 * when {get_rmt ==0 AND get_des_get_tail == 0}, this
383 		 * field selects one of eight POW internal-input
384 		 * queues (0-7), one per QOS level; values 8-15 are
385 		 * illegal in this case; when {get_rmt ==0 AND
386 		 * get_des_get_tail == 1}, this field selects one of
387 		 * 16 deschedule lists (per group); when get_rmt ==1,
388 		 * this field selects one of 16 memory-input queue
389 		 * lists.  The two memory-input queue lists associated
390 		 * with each QOS level are:
391 		 *
392 		 * - qosgrp = 0, qosgrp = 8:	  QOS0
393 		 * - qosgrp = 1, qosgrp = 9:	  QOS1
394 		 * - qosgrp = 2, qosgrp = 10:	  QOS2
395 		 * - qosgrp = 3, qosgrp = 11:	  QOS3
396 		 * - qosgrp = 4, qosgrp = 12:	  QOS4
397 		 * - qosgrp = 5, qosgrp = 13:	  QOS5
398 		 * - qosgrp = 6, qosgrp = 14:	  QOS6
399 		 * - qosgrp = 7, qosgrp = 15:	  QOS7
400 		 */
401 		uint64_t qosgrp:4;
402 		/*
403 		 * If set and get_rmt is clear, return deschedule list
404 		 * indexes rather than indexes for the specified qos
405 		 * level; if set and get_rmt is set, return the tail
406 		 * pointer rather than the head pointer for the
407 		 * specified qos level.
408 		 */
409 		uint64_t get_des_get_tail:1;
410 		/*
411 		 * If set, return remote pointers rather than the
412 		 * local indexes for the specified qos level.
413 		 */
414 		uint64_t get_rmt:1;
415 		/* Must be zero */
416 		uint64_t reserved_0_2:3;
417 #else
418 		uint64_t reserved_0_2:3;
419 		uint64_t get_rmt:1;
420 		uint64_t get_des_get_tail:1;
421 		uint64_t qosgrp:4;
422 		uint64_t reserved_9_39:31;
423 		uint64_t did:8;
424 		uint64_t is_io:1;
425 		uint64_t reserved_49_61:13;
426 		uint64_t mem_region:2;
427 #endif
428 	} sindexload;
429 
430     /**
431      * address for NULL_RD request (did<2:0> == 4) when this is read,
432      * HW attempts to change the state to NULL if it is NULL_NULL (the
433      * hardware cannot switch from NULL_NULL to NULL if a POW entry is
434      * not available - software may need to recover by finishing
435      * another piece of work before a POW entry can ever become
436      * available.)
437      */
438 	struct {
439 #ifdef __BIG_ENDIAN_BITFIELD
440 		/* Mips64 address region. Should be CVMX_IO_SEG */
441 		uint64_t mem_region:2;
442 		/* Must be zero */
443 		uint64_t reserved_49_61:13;
444 		/* Must be one */
445 		uint64_t is_io:1;
446 		/* the ID of POW -- did<2:0> == 4 in this case */
447 		uint64_t did:8;
448 		/* Must be zero */
449 		uint64_t reserved_0_39:40;
450 #else
451 		uint64_t reserved_0_39:40;
452 		uint64_t did:8;
453 		uint64_t is_io:1;
454 		uint64_t reserved_49_61:13;
455 		uint64_t mem_region:2;
456 #endif
457 	} snull_rd;
458 } cvmx_pow_load_addr_t;
459 
460 /**
461  * This structure defines the response to a load/SENDSINGLE to POW
462  * (except CSR reads)
463  */
464 typedef union {
465 	uint64_t u64;
466 
467     /**
468      * Response to new work request loads
469      */
470 	struct {
471 #ifdef __BIG_ENDIAN_BITFIELD
472 		/*
473 		 * Set when no new work queue entry was returned.  *
474 		 * If there was de-scheduled work, the HW will
475 		 * definitely return it. When this bit is set, it
476 		 * could mean either mean:
477 		 *
478 		 * - There was no work, or
479 		 *
480 		 * - There was no work that the HW could find. This
481 		 *   case can happen, regardless of the wait bit value
482 		 *   in the original request, when there is work in
483 		 *   the IQ's that is too deep down the list.
484 		 */
485 		uint64_t no_work:1;
486 		/* Must be zero */
487 		uint64_t reserved_40_62:23;
488 		/* 36 in O1 -- the work queue pointer */
489 		uint64_t addr:40;
490 #else
491 		uint64_t addr:40;
492 		uint64_t reserved_40_62:23;
493 		uint64_t no_work:1;
494 #endif
495 	} s_work;
496 
497     /**
498      * Result for a POW Status Load (when get_cur==0 and get_wqp==0)
499      */
500 	struct {
501 #ifdef __BIG_ENDIAN_BITFIELD
502 		uint64_t reserved_62_63:2;
503 		/* Set when there is a pending non-NULL SWTAG or
504 		 * SWTAG_FULL, and the POW entry has not left the list
505 		 * for the original tag. */
506 		uint64_t pend_switch:1;
507 		/* Set when SWTAG_FULL and pend_switch is set. */
508 		uint64_t pend_switch_full:1;
509 		/*
510 		 * Set when there is a pending NULL SWTAG, or an
511 		 * implicit switch to NULL.
512 		 */
513 		uint64_t pend_switch_null:1;
514 		/* Set when there is a pending DESCHED or SWTAG_DESCHED. */
515 		uint64_t pend_desched:1;
516 		/*
517 		 * Set when there is a pending SWTAG_DESCHED and
518 		 * pend_desched is set.
519 		 */
520 		uint64_t pend_desched_switch:1;
521 		/* Set when nosched is desired and pend_desched is set. */
522 		uint64_t pend_nosched:1;
523 		/* Set when there is a pending GET_WORK. */
524 		uint64_t pend_new_work:1;
525 		/*
526 		 * When pend_new_work is set, this bit indicates that
527 		 * the wait bit was set.
528 		 */
529 		uint64_t pend_new_work_wait:1;
530 		/* Set when there is a pending NULL_RD. */
531 		uint64_t pend_null_rd:1;
532 		/* Set when there is a pending CLR_NSCHED. */
533 		uint64_t pend_nosched_clr:1;
534 		uint64_t reserved_51:1;
535 		/* This is the index when pend_nosched_clr is set. */
536 		uint64_t pend_index:11;
537 		/*
538 		 * This is the new_grp when (pend_desched AND
539 		 * pend_desched_switch) is set.
540 		 */
541 		uint64_t pend_grp:4;
542 		uint64_t reserved_34_35:2;
543 		/*
544 		 * This is the tag type when pend_switch or
545 		 * (pend_desched AND pend_desched_switch) are set.
546 		 */
547 		uint64_t pend_type:2;
548 		/*
549 		 * - this is the tag when pend_switch or (pend_desched
550 		 *    AND pend_desched_switch) are set.
551 		 */
552 		uint64_t pend_tag:32;
553 #else
554 		uint64_t pend_tag:32;
555 		uint64_t pend_type:2;
556 		uint64_t reserved_34_35:2;
557 		uint64_t pend_grp:4;
558 		uint64_t pend_index:11;
559 		uint64_t reserved_51:1;
560 		uint64_t pend_nosched_clr:1;
561 		uint64_t pend_null_rd:1;
562 		uint64_t pend_new_work_wait:1;
563 		uint64_t pend_new_work:1;
564 		uint64_t pend_nosched:1;
565 		uint64_t pend_desched_switch:1;
566 		uint64_t pend_desched:1;
567 		uint64_t pend_switch_null:1;
568 		uint64_t pend_switch_full:1;
569 		uint64_t pend_switch:1;
570 		uint64_t reserved_62_63:2;
571 #endif
572 	} s_sstatus0;
573 
574     /**
575      * Result for a POW Status Load (when get_cur==0 and get_wqp==1)
576      */
577 	struct {
578 #ifdef __BIG_ENDIAN_BITFIELD
579 		uint64_t reserved_62_63:2;
580 		/*
581 		 * Set when there is a pending non-NULL SWTAG or
582 		 * SWTAG_FULL, and the POW entry has not left the list
583 		 * for the original tag.
584 		 */
585 		uint64_t pend_switch:1;
586 		/* Set when SWTAG_FULL and pend_switch is set. */
587 		uint64_t pend_switch_full:1;
588 		/*
589 		 * Set when there is a pending NULL SWTAG, or an
590 		 * implicit switch to NULL.
591 		 */
592 		uint64_t pend_switch_null:1;
593 		/*
594 		 * Set when there is a pending DESCHED or
595 		 * SWTAG_DESCHED.
596 		 */
597 		uint64_t pend_desched:1;
598 		/*
599 		 * Set when there is a pending SWTAG_DESCHED and
600 		 * pend_desched is set.
601 		 */
602 		uint64_t pend_desched_switch:1;
603 		/* Set when nosched is desired and pend_desched is set. */
604 		uint64_t pend_nosched:1;
605 		/* Set when there is a pending GET_WORK. */
606 		uint64_t pend_new_work:1;
607 		/*
608 		 * When pend_new_work is set, this bit indicates that
609 		 * the wait bit was set.
610 		 */
611 		uint64_t pend_new_work_wait:1;
612 		/* Set when there is a pending NULL_RD. */
613 		uint64_t pend_null_rd:1;
614 		/* Set when there is a pending CLR_NSCHED. */
615 		uint64_t pend_nosched_clr:1;
616 		uint64_t reserved_51:1;
617 		/* This is the index when pend_nosched_clr is set. */
618 		uint64_t pend_index:11;
619 		/*
620 		 * This is the new_grp when (pend_desched AND
621 		 * pend_desched_switch) is set.
622 		 */
623 		uint64_t pend_grp:4;
624 		/* This is the wqp when pend_nosched_clr is set. */
625 		uint64_t pend_wqp:36;
626 #else
627 	        uint64_t pend_wqp:36;
628 	        uint64_t pend_grp:4;
629 	        uint64_t pend_index:11;
630 	        uint64_t reserved_51:1;
631 	        uint64_t pend_nosched_clr:1;
632 	        uint64_t pend_null_rd:1;
633 	        uint64_t pend_new_work_wait:1;
634 	        uint64_t pend_new_work:1;
635 	        uint64_t pend_nosched:1;
636 	        uint64_t pend_desched_switch:1;
637 	        uint64_t pend_desched:1;
638 	        uint64_t pend_switch_null:1;
639 	        uint64_t pend_switch_full:1;
640 	        uint64_t pend_switch:1;
641 	        uint64_t reserved_62_63:2;
642 #endif
643 	} s_sstatus1;
644 
645     /**
646      * Result for a POW Status Load (when get_cur==1, get_wqp==0, and
647      * get_rev==0)
648      */
649 	struct {
650 #ifdef __BIG_ENDIAN_BITFIELD
651 		uint64_t reserved_62_63:2;
652 		/*
653 		 * Points to the next POW entry in the tag list when
654 		 * tail == 0 (and tag_type is not NULL or NULL_NULL).
655 		 */
656 		uint64_t link_index:11;
657 		/* The POW entry attached to the core. */
658 		uint64_t index:11;
659 		/*
660 		 * The group attached to the core (updated when new
661 		 * tag list entered on SWTAG_FULL).
662 		 */
663 		uint64_t grp:4;
664 		/*
665 		 * Set when this POW entry is at the head of its tag
666 		 * list (also set when in the NULL or NULL_NULL
667 		 * state).
668 		 */
669 		uint64_t head:1;
670 		/*
671 		 * Set when this POW entry is at the tail of its tag
672 		 * list (also set when in the NULL or NULL_NULL
673 		 * state).
674 		 */
675 		uint64_t tail:1;
676 		/*
677 		 * The tag type attached to the core (updated when new
678 		 * tag list entered on SWTAG, SWTAG_FULL, or
679 		 * SWTAG_DESCHED).
680 		 */
681 		uint64_t tag_type:2;
682 		/*
683 		 * The tag attached to the core (updated when new tag
684 		 * list entered on SWTAG, SWTAG_FULL, or
685 		 * SWTAG_DESCHED).
686 		 */
687 		uint64_t tag:32;
688 #else
689 	        uint64_t tag:32;
690 	        uint64_t tag_type:2;
691 	        uint64_t tail:1;
692 	        uint64_t head:1;
693 	        uint64_t grp:4;
694 	        uint64_t index:11;
695 	        uint64_t link_index:11;
696 	        uint64_t reserved_62_63:2;
697 #endif
698 	} s_sstatus2;
699 
700     /**
701      * Result for a POW Status Load (when get_cur==1, get_wqp==0, and get_rev==1)
702      */
703 	struct {
704 #ifdef __BIG_ENDIAN_BITFIELD
705 		uint64_t reserved_62_63:2;
706 		/*
707 		 * Points to the prior POW entry in the tag list when
708 		 * head == 0 (and tag_type is not NULL or
709 		 * NULL_NULL). This field is unpredictable when the
710 		 * core's state is NULL or NULL_NULL.
711 		 */
712 		uint64_t revlink_index:11;
713 		/* The POW entry attached to the core. */
714 		uint64_t index:11;
715 		/*
716 		 * The group attached to the core (updated when new
717 		 * tag list entered on SWTAG_FULL).
718 		 */
719 		uint64_t grp:4;
720 		/* Set when this POW entry is at the head of its tag
721 		 * list (also set when in the NULL or NULL_NULL
722 		 * state).
723 		 */
724 		uint64_t head:1;
725 		/*
726 		 * Set when this POW entry is at the tail of its tag
727 		 * list (also set when in the NULL or NULL_NULL
728 		 * state).
729 		 */
730 		uint64_t tail:1;
731 		/*
732 		 * The tag type attached to the core (updated when new
733 		 * tag list entered on SWTAG, SWTAG_FULL, or
734 		 * SWTAG_DESCHED).
735 		 */
736 		uint64_t tag_type:2;
737 		/*
738 		 * The tag attached to the core (updated when new tag
739 		 * list entered on SWTAG, SWTAG_FULL, or
740 		 * SWTAG_DESCHED).
741 		 */
742 		uint64_t tag:32;
743 #else
744 	        uint64_t tag:32;
745 	        uint64_t tag_type:2;
746 	        uint64_t tail:1;
747 	        uint64_t head:1;
748 	        uint64_t grp:4;
749 	        uint64_t index:11;
750 	        uint64_t revlink_index:11;
751 	        uint64_t reserved_62_63:2;
752 #endif
753 	} s_sstatus3;
754 
755     /**
756      * Result for a POW Status Load (when get_cur==1, get_wqp==1, and
757      * get_rev==0)
758      */
759 	struct {
760 #ifdef __BIG_ENDIAN_BITFIELD
761 		uint64_t reserved_62_63:2;
762 		/*
763 		 * Points to the next POW entry in the tag list when
764 		 * tail == 0 (and tag_type is not NULL or NULL_NULL).
765 		 */
766 		uint64_t link_index:11;
767 		/* The POW entry attached to the core. */
768 		uint64_t index:11;
769 		/*
770 		 * The group attached to the core (updated when new
771 		 * tag list entered on SWTAG_FULL).
772 		 */
773 		uint64_t grp:4;
774 		/*
775 		 * The wqp attached to the core (updated when new tag
776 		 * list entered on SWTAG_FULL).
777 		 */
778 		uint64_t wqp:36;
779 #else
780 	        uint64_t wqp:36;
781 	        uint64_t grp:4;
782 	        uint64_t index:11;
783 	        uint64_t link_index:11;
784 	        uint64_t reserved_62_63:2;
785 #endif
786 	} s_sstatus4;
787 
788     /**
789      * Result for a POW Status Load (when get_cur==1, get_wqp==1, and
790      * get_rev==1)
791      */
792 	struct {
793 #ifdef __BIG_ENDIAN_BITFIELD
794 		uint64_t reserved_62_63:2;
795 		/*
796 		 * Points to the prior POW entry in the tag list when
797 		 * head == 0 (and tag_type is not NULL or
798 		 * NULL_NULL). This field is unpredictable when the
799 		 * core's state is NULL or NULL_NULL.
800 		 */
801 		uint64_t revlink_index:11;
802 		/* The POW entry attached to the core. */
803 		uint64_t index:11;
804 		/*
805 		 * The group attached to the core (updated when new
806 		 * tag list entered on SWTAG_FULL).
807 		 */
808 		uint64_t grp:4;
809 		/*
810 		 * The wqp attached to the core (updated when new tag
811 		 * list entered on SWTAG_FULL).
812 		 */
813 		uint64_t wqp:36;
814 #else
815 	        uint64_t wqp:36;
816 	        uint64_t grp:4;
817 	        uint64_t index:11;
818 	        uint64_t revlink_index:11;
819 	        uint64_t reserved_62_63:2;
820 #endif
821 	} s_sstatus5;
822 
823     /**
824      * Result For POW Memory Load (get_des == 0 and get_wqp == 0)
825      */
826 	struct {
827 #ifdef __BIG_ENDIAN_BITFIELD
828 		uint64_t reserved_51_63:13;
829 		/*
830 		 * The next entry in the input, free, descheduled_head
831 		 * list (unpredictable if entry is the tail of the
832 		 * list).
833 		 */
834 		uint64_t next_index:11;
835 		/* The group of the POW entry. */
836 		uint64_t grp:4;
837 		uint64_t reserved_35:1;
838 		/*
839 		 * Set when this POW entry is at the tail of its tag
840 		 * list (also set when in the NULL or NULL_NULL
841 		 * state).
842 		 */
843 		uint64_t tail:1;
844 		/* The tag type of the POW entry. */
845 		uint64_t tag_type:2;
846 		/* The tag of the POW entry. */
847 		uint64_t tag:32;
848 #else
849 	        uint64_t tag:32;
850 	        uint64_t tag_type:2;
851 	        uint64_t tail:1;
852 	        uint64_t reserved_35:1;
853 	        uint64_t grp:4;
854 	        uint64_t next_index:11;
855 	        uint64_t reserved_51_63:13;
856 #endif
857 	} s_smemload0;
858 
859     /**
860      * Result For POW Memory Load (get_des == 0 and get_wqp == 1)
861      */
862 	struct {
863 #ifdef __BIG_ENDIAN_BITFIELD
864 		uint64_t reserved_51_63:13;
865 		/*
866 		 * The next entry in the input, free, descheduled_head
867 		 * list (unpredictable if entry is the tail of the
868 		 * list).
869 		 */
870 		uint64_t next_index:11;
871 		/* The group of the POW entry. */
872 		uint64_t grp:4;
873 		/* The WQP held in the POW entry. */
874 		uint64_t wqp:36;
875 #else
876 	        uint64_t wqp:36;
877 	        uint64_t grp:4;
878 	        uint64_t next_index:11;
879 	        uint64_t reserved_51_63:13;
880 #endif
881 	} s_smemload1;
882 
883     /**
884      * Result For POW Memory Load (get_des == 1)
885      */
886 	struct {
887 #ifdef __BIG_ENDIAN_BITFIELD
888 		uint64_t reserved_51_63:13;
889 		/*
890 		 * The next entry in the tag list connected to the
891 		 * descheduled head.
892 		 */
893 		uint64_t fwd_index:11;
894 		/* The group of the POW entry. */
895 		uint64_t grp:4;
896 		/* The nosched bit for the POW entry. */
897 		uint64_t nosched:1;
898 		/* There is a pending tag switch */
899 		uint64_t pend_switch:1;
900 		/*
901 		 * The next tag type for the new tag list when
902 		 * pend_switch is set.
903 		 */
904 		uint64_t pend_type:2;
905 		/*
906 		 * The next tag for the new tag list when pend_switch
907 		 * is set.
908 		 */
909 		uint64_t pend_tag:32;
910 #else
911 	        uint64_t pend_tag:32;
912 	        uint64_t pend_type:2;
913 	        uint64_t pend_switch:1;
914 	        uint64_t nosched:1;
915 	        uint64_t grp:4;
916 	        uint64_t fwd_index:11;
917 	        uint64_t reserved_51_63:13;
918 #endif
919 	} s_smemload2;
920 
921     /**
922      * Result For POW Index/Pointer Load (get_rmt == 0/get_des_get_tail == 0)
923      */
924 	struct {
925 #ifdef __BIG_ENDIAN_BITFIELD
926 		uint64_t reserved_52_63:12;
927 		/*
928 		 * set when there is one or more POW entries on the
929 		 * free list.
930 		 */
931 		uint64_t free_val:1;
932 		/*
933 		 * set when there is exactly one POW entry on the free
934 		 * list.
935 		 */
936 		uint64_t free_one:1;
937 		uint64_t reserved_49:1;
938 		/*
939 		 * when free_val is set, indicates the first entry on
940 		 * the free list.
941 		 */
942 		uint64_t free_head:11;
943 		uint64_t reserved_37:1;
944 		/*
945 		 * when free_val is set, indicates the last entry on
946 		 * the free list.
947 		 */
948 		uint64_t free_tail:11;
949 		/*
950 		 * set when there is one or more POW entries on the
951 		 * input Q list selected by qosgrp.
952 		 */
953 		uint64_t loc_val:1;
954 		/*
955 		 * set when there is exactly one POW entry on the
956 		 * input Q list selected by qosgrp.
957 		 */
958 		uint64_t loc_one:1;
959 		uint64_t reserved_23:1;
960 		/*
961 		 * when loc_val is set, indicates the first entry on
962 		 * the input Q list selected by qosgrp.
963 		 */
964 		uint64_t loc_head:11;
965 		uint64_t reserved_11:1;
966 		/*
967 		 * when loc_val is set, indicates the last entry on
968 		 * the input Q list selected by qosgrp.
969 		 */
970 		uint64_t loc_tail:11;
971 #else
972 	        uint64_t loc_tail:11;
973 	        uint64_t reserved_11:1;
974 	        uint64_t loc_head:11;
975 	        uint64_t reserved_23:1;
976 	        uint64_t loc_one:1;
977 	        uint64_t loc_val:1;
978 	        uint64_t free_tail:11;
979 	        uint64_t reserved_37:1;
980 	        uint64_t free_head:11;
981 	        uint64_t reserved_49:1;
982 	        uint64_t free_one:1;
983 	        uint64_t free_val:1;
984 	        uint64_t reserved_52_63:12;
985 #endif
986 	} sindexload0;
987 
988     /**
989      * Result For POW Index/Pointer Load (get_rmt == 0/get_des_get_tail == 1)
990      */
991 	struct {
992 #ifdef __BIG_ENDIAN_BITFIELD
993 		uint64_t reserved_52_63:12;
994 		/*
995 		 * set when there is one or more POW entries on the
996 		 * nosched list.
997 		 */
998 		uint64_t nosched_val:1;
999 		/*
1000 		 * set when there is exactly one POW entry on the
1001 		 * nosched list.
1002 		 */
1003 		uint64_t nosched_one:1;
1004 		uint64_t reserved_49:1;
1005 		/*
1006 		 * when nosched_val is set, indicates the first entry
1007 		 * on the nosched list.
1008 		 */
1009 		uint64_t nosched_head:11;
1010 		uint64_t reserved_37:1;
1011 		/*
1012 		 * when nosched_val is set, indicates the last entry
1013 		 * on the nosched list.
1014 		 */
1015 		uint64_t nosched_tail:11;
1016 		/*
1017 		 * set when there is one or more descheduled heads on
1018 		 * the descheduled list selected by qosgrp.
1019 		 */
1020 		uint64_t des_val:1;
1021 		/*
1022 		 * set when there is exactly one descheduled head on
1023 		 * the descheduled list selected by qosgrp.
1024 		 */
1025 		uint64_t des_one:1;
1026 		uint64_t reserved_23:1;
1027 		/*
1028 		 * when des_val is set, indicates the first
1029 		 * descheduled head on the descheduled list selected
1030 		 * by qosgrp.
1031 		 */
1032 		uint64_t des_head:11;
1033 		uint64_t reserved_11:1;
1034 		/*
1035 		 * when des_val is set, indicates the last descheduled
1036 		 * head on the descheduled list selected by qosgrp.
1037 		 */
1038 		uint64_t des_tail:11;
1039 #else
1040 	        uint64_t des_tail:11;
1041 	        uint64_t reserved_11:1;
1042 	        uint64_t des_head:11;
1043 	        uint64_t reserved_23:1;
1044 	        uint64_t des_one:1;
1045 	        uint64_t des_val:1;
1046 	        uint64_t nosched_tail:11;
1047 	        uint64_t reserved_37:1;
1048 	        uint64_t nosched_head:11;
1049 	        uint64_t reserved_49:1;
1050 	        uint64_t nosched_one:1;
1051 	        uint64_t nosched_val:1;
1052 	        uint64_t reserved_52_63:12;
1053 #endif
1054 	} sindexload1;
1055 
1056     /**
1057      * Result For POW Index/Pointer Load (get_rmt == 1/get_des_get_tail == 0)
1058      */
1059 	struct {
1060 #ifdef __BIG_ENDIAN_BITFIELD
1061 		uint64_t reserved_39_63:25;
1062 		/*
1063 		 * Set when this DRAM list is the current head
1064 		 * (i.e. is the next to be reloaded when the POW
1065 		 * hardware reloads a POW entry from DRAM). The POW
1066 		 * hardware alternates between the two DRAM lists
1067 		 * associated with a QOS level when it reloads work
1068 		 * from DRAM into the POW unit.
1069 		 */
1070 		uint64_t rmt_is_head:1;
1071 		/*
1072 		 * Set when the DRAM portion of the input Q list
1073 		 * selected by qosgrp contains one or more pieces of
1074 		 * work.
1075 		 */
1076 		uint64_t rmt_val:1;
1077 		/*
1078 		 * Set when the DRAM portion of the input Q list
1079 		 * selected by qosgrp contains exactly one piece of
1080 		 * work.
1081 		 */
1082 		uint64_t rmt_one:1;
1083 		/*
1084 		 * When rmt_val is set, indicates the first piece of
1085 		 * work on the DRAM input Q list selected by
1086 		 * qosgrp.
1087 		 */
1088 		uint64_t rmt_head:36;
1089 #else
1090 	        uint64_t rmt_head:36;
1091 	        uint64_t rmt_one:1;
1092 	        uint64_t rmt_val:1;
1093 	        uint64_t rmt_is_head:1;
1094 	        uint64_t reserved_39_63:25;
1095 #endif
1096 	} sindexload2;
1097 
1098     /**
1099      * Result For POW Index/Pointer Load (get_rmt ==
1100      * 1/get_des_get_tail == 1)
1101      */
1102 	struct {
1103 #ifdef __BIG_ENDIAN_BITFIELD
1104 		uint64_t reserved_39_63:25;
1105 		/*
1106 		 * set when this DRAM list is the current head
1107 		 * (i.e. is the next to be reloaded when the POW
1108 		 * hardware reloads a POW entry from DRAM). The POW
1109 		 * hardware alternates between the two DRAM lists
1110 		 * associated with a QOS level when it reloads work
1111 		 * from DRAM into the POW unit.
1112 		 */
1113 		uint64_t rmt_is_head:1;
1114 		/*
1115 		 * set when the DRAM portion of the input Q list
1116 		 * selected by qosgrp contains one or more pieces of
1117 		 * work.
1118 		 */
1119 		uint64_t rmt_val:1;
1120 		/*
1121 		 * set when the DRAM portion of the input Q list
1122 		 * selected by qosgrp contains exactly one piece of
1123 		 * work.
1124 		 */
1125 		uint64_t rmt_one:1;
1126 		/*
1127 		 * when rmt_val is set, indicates the last piece of
1128 		 * work on the DRAM input Q list selected by
1129 		 * qosgrp.
1130 		 */
1131 		uint64_t rmt_tail:36;
1132 #else
1133 	        uint64_t rmt_tail:36;
1134 	        uint64_t rmt_one:1;
1135 	        uint64_t rmt_val:1;
1136 	        uint64_t rmt_is_head:1;
1137 	        uint64_t reserved_39_63:25;
1138 #endif
1139 	} sindexload3;
1140 
1141     /**
1142      * Response to NULL_RD request loads
1143      */
1144 	struct {
1145 #ifdef __BIG_ENDIAN_BITFIELD
1146 		uint64_t unused:62;
1147 		/* of type cvmx_pow_tag_type_t. state is one of the
1148 		 * following:
1149 		 *
1150 		 * - CVMX_POW_TAG_TYPE_ORDERED
1151 		 * - CVMX_POW_TAG_TYPE_ATOMIC
1152 		 * - CVMX_POW_TAG_TYPE_NULL
1153 		 * - CVMX_POW_TAG_TYPE_NULL_NULL
1154 		 */
1155 		uint64_t state:2;
1156 #else
1157 	        uint64_t state:2;
1158 	        uint64_t unused:62;
1159 #endif
1160 	} s_null_rd;
1161 
1162 } cvmx_pow_tag_load_resp_t;
1163 
1164 /**
1165  * This structure describes the address used for stores to the POW.
1166  *  The store address is meaningful on stores to the POW.  The
1167  *  hardware assumes that an aligned 64-bit store was used for all
1168  *  these stores.  Note the assumption that the work queue entry is
1169  *  aligned on an 8-byte boundary (since the low-order 3 address bits
1170  *  must be zero).  Note that not all fields are used by all
1171  *  operations.
1172  *
1173  *  NOTE: The following is the behavior of the pending switch bit at the PP
1174  *	 for POW stores (i.e. when did<7:3> == 0xc)
1175  *     - did<2:0> == 0	    => pending switch bit is set
1176  *     - did<2:0> == 1	    => no affect on the pending switch bit
1177  *     - did<2:0> == 3	    => pending switch bit is cleared
1178  *     - did<2:0> == 7	    => no affect on the pending switch bit
1179  *     - did<2:0> == others => must not be used
1180  *     - No other loads/stores have an affect on the pending switch bit
1181  *     - The switch bus from POW can clear the pending switch bit
1182  *
1183  *  NOTE: did<2:0> == 2 is used by the HW for a special single-cycle
1184  *  ADDWQ command that only contains the pointer). SW must never use
1185  *  did<2:0> == 2.
1186  */
1187 typedef union {
1188     /**
1189      * Unsigned 64 bit integer representation of store address
1190      */
1191 	uint64_t u64;
1192 
1193 	struct {
1194 #ifdef __BIG_ENDIAN_BITFIELD
1195 		/* Memory region.  Should be CVMX_IO_SEG in most cases */
1196 		uint64_t mem_reg:2;
1197 		uint64_t reserved_49_61:13;	/* Must be zero */
1198 		uint64_t is_io:1;	/* Must be one */
1199 		/* Device ID of POW.  Note that different sub-dids are used. */
1200 		uint64_t did:8;
1201 		uint64_t reserved_36_39:4;	/* Must be zero */
1202 		/* Address field. addr<2:0> must be zero */
1203 		uint64_t addr:36;
1204 #else
1205 	        uint64_t addr:36;
1206 	        uint64_t reserved_36_39:4;
1207 	        uint64_t did:8;
1208 	        uint64_t is_io:1;
1209 	        uint64_t reserved_49_61:13;
1210 	        uint64_t mem_reg:2;
1211 #endif
1212 	} stag;
1213 } cvmx_pow_tag_store_addr_t;
1214 
1215 /**
1216  * decode of the store data when an IOBDMA SENDSINGLE is sent to POW
1217  */
1218 typedef union {
1219 	uint64_t u64;
1220 
1221 	struct {
1222 #ifdef __BIG_ENDIAN_BITFIELD
1223 		/*
1224 		 * the (64-bit word) location in scratchpad to write
1225 		 * to (if len != 0)
1226 		 */
1227 		uint64_t scraddr:8;
1228 		/* the number of words in the response (0 => no response) */
1229 		uint64_t len:8;
1230 		/* the ID of the device on the non-coherent bus */
1231 		uint64_t did:8;
1232 		uint64_t unused:36;
1233 		/* if set, don't return load response until work is available */
1234 		uint64_t wait:1;
1235 		uint64_t unused2:3;
1236 #else
1237 	        uint64_t unused2:3;
1238 	        uint64_t wait:1;
1239 	        uint64_t unused:36;
1240 	        uint64_t did:8;
1241 	        uint64_t len:8;
1242 	        uint64_t scraddr:8;
1243 #endif
1244 	} s;
1245 
1246 } cvmx_pow_iobdma_store_t;
1247 
1248 /* CSR typedefs have been moved to cvmx-csr-*.h */
1249 
1250 /**
1251  * Get the POW tag for this core. This returns the current
1252  * tag type, tag, group, and POW entry index associated with
1253  * this core. Index is only valid if the tag type isn't NULL_NULL.
1254  * If a tag switch is pending this routine returns the tag before
1255  * the tag switch, not after.
1256  *
1257  * Returns Current tag
1258  */
1259 static inline cvmx_pow_tag_req_t cvmx_pow_get_current_tag(void)
1260 {
1261 	cvmx_pow_load_addr_t load_addr;
1262 	cvmx_pow_tag_load_resp_t load_resp;
1263 	cvmx_pow_tag_req_t result;
1264 
1265 	load_addr.u64 = 0;
1266 	load_addr.sstatus.mem_region = CVMX_IO_SEG;
1267 	load_addr.sstatus.is_io = 1;
1268 	load_addr.sstatus.did = CVMX_OCT_DID_TAG_TAG1;
1269 	load_addr.sstatus.coreid = cvmx_get_core_num();
1270 	load_addr.sstatus.get_cur = 1;
1271 	load_resp.u64 = cvmx_read_csr(load_addr.u64);
1272 	result.u64 = 0;
1273 	result.s.grp = load_resp.s_sstatus2.grp;
1274 	result.s.index = load_resp.s_sstatus2.index;
1275 	result.s.type = load_resp.s_sstatus2.tag_type;
1276 	result.s.tag = load_resp.s_sstatus2.tag;
1277 	return result;
1278 }
1279 
1280 /**
1281  * Get the POW WQE for this core. This returns the work queue
1282  * entry currently associated with this core.
1283  *
1284  * Returns WQE pointer
1285  */
1286 static inline struct cvmx_wqe *cvmx_pow_get_current_wqp(void)
1287 {
1288 	cvmx_pow_load_addr_t load_addr;
1289 	cvmx_pow_tag_load_resp_t load_resp;
1290 
1291 	load_addr.u64 = 0;
1292 	load_addr.sstatus.mem_region = CVMX_IO_SEG;
1293 	load_addr.sstatus.is_io = 1;
1294 	load_addr.sstatus.did = CVMX_OCT_DID_TAG_TAG1;
1295 	load_addr.sstatus.coreid = cvmx_get_core_num();
1296 	load_addr.sstatus.get_cur = 1;
1297 	load_addr.sstatus.get_wqp = 1;
1298 	load_resp.u64 = cvmx_read_csr(load_addr.u64);
1299 	return (struct cvmx_wqe *) cvmx_phys_to_ptr(load_resp.s_sstatus4.wqp);
1300 }
1301 
1302 #ifndef CVMX_MF_CHORD
1303 #define CVMX_MF_CHORD(dest)	    CVMX_RDHWR(dest, 30)
1304 #endif
1305 
1306 /**
1307  * Print a warning if a tag switch is pending for this core
1308  *
1309  * @function: Function name checking for a pending tag switch
1310  */
1311 static inline void __cvmx_pow_warn_if_pending_switch(const char *function)
1312 {
1313 	uint64_t switch_complete;
1314 	CVMX_MF_CHORD(switch_complete);
1315 	if (!switch_complete)
1316 		pr_warn("%s called with tag switch in progress\n", function);
1317 }
1318 
1319 /**
1320  * Waits for a tag switch to complete by polling the completion bit.
1321  * Note that switches to NULL complete immediately and do not need
1322  * to be waited for.
1323  */
1324 static inline void cvmx_pow_tag_sw_wait(void)
1325 {
1326 	const uint64_t MAX_CYCLES = 1ull << 31;
1327 	uint64_t switch_complete;
1328 	uint64_t start_cycle = cvmx_get_cycle();
1329 	while (1) {
1330 		CVMX_MF_CHORD(switch_complete);
1331 		if (unlikely(switch_complete))
1332 			break;
1333 		if (unlikely(cvmx_get_cycle() > start_cycle + MAX_CYCLES)) {
1334 			pr_warn("Tag switch is taking a long time, possible deadlock\n");
1335 			start_cycle = -MAX_CYCLES - 1;
1336 		}
1337 	}
1338 }
1339 
1340 /**
1341  * Synchronous work request.  Requests work from the POW.
1342  * This function does NOT wait for previous tag switches to complete,
1343  * so the caller must ensure that there is not a pending tag switch.
1344  *
1345  * @wait:   When set, call stalls until work becomes avaiable, or times out.
1346  *		 If not set, returns immediately.
1347  *
1348  * Returns Returns the WQE pointer from POW. Returns NULL if no work
1349  * was available.
1350  */
1351 static inline struct cvmx_wqe *cvmx_pow_work_request_sync_nocheck(cvmx_pow_wait_t
1352 							     wait)
1353 {
1354 	cvmx_pow_load_addr_t ptr;
1355 	cvmx_pow_tag_load_resp_t result;
1356 
1357 	if (CVMX_ENABLE_POW_CHECKS)
1358 		__cvmx_pow_warn_if_pending_switch(__func__);
1359 
1360 	ptr.u64 = 0;
1361 	ptr.swork.mem_region = CVMX_IO_SEG;
1362 	ptr.swork.is_io = 1;
1363 	ptr.swork.did = CVMX_OCT_DID_TAG_SWTAG;
1364 	ptr.swork.wait = wait;
1365 
1366 	result.u64 = cvmx_read_csr(ptr.u64);
1367 
1368 	if (result.s_work.no_work)
1369 		return NULL;
1370 	else
1371 		return (struct cvmx_wqe *) cvmx_phys_to_ptr(result.s_work.addr);
1372 }
1373 
1374 /**
1375  * Synchronous work request.  Requests work from the POW.
1376  * This function waits for any previous tag switch to complete before
1377  * requesting the new work.
1378  *
1379  * @wait:   When set, call stalls until work becomes avaiable, or times out.
1380  *		 If not set, returns immediately.
1381  *
1382  * Returns Returns the WQE pointer from POW. Returns NULL if no work
1383  * was available.
1384  */
1385 static inline struct cvmx_wqe *cvmx_pow_work_request_sync(cvmx_pow_wait_t wait)
1386 {
1387 	if (CVMX_ENABLE_POW_CHECKS)
1388 		__cvmx_pow_warn_if_pending_switch(__func__);
1389 
1390 	/* Must not have a switch pending when requesting work */
1391 	cvmx_pow_tag_sw_wait();
1392 	return cvmx_pow_work_request_sync_nocheck(wait);
1393 
1394 }
1395 
1396 /**
1397  * Synchronous null_rd request.	 Requests a switch out of NULL_NULL POW state.
1398  * This function waits for any previous tag switch to complete before
1399  * requesting the null_rd.
1400  *
1401  * Returns Returns the POW state of type cvmx_pow_tag_type_t.
1402  */
1403 static inline enum cvmx_pow_tag_type cvmx_pow_work_request_null_rd(void)
1404 {
1405 	cvmx_pow_load_addr_t ptr;
1406 	cvmx_pow_tag_load_resp_t result;
1407 
1408 	if (CVMX_ENABLE_POW_CHECKS)
1409 		__cvmx_pow_warn_if_pending_switch(__func__);
1410 
1411 	/* Must not have a switch pending when requesting work */
1412 	cvmx_pow_tag_sw_wait();
1413 
1414 	ptr.u64 = 0;
1415 	ptr.snull_rd.mem_region = CVMX_IO_SEG;
1416 	ptr.snull_rd.is_io = 1;
1417 	ptr.snull_rd.did = CVMX_OCT_DID_TAG_NULL_RD;
1418 
1419 	result.u64 = cvmx_read_csr(ptr.u64);
1420 
1421 	return (enum cvmx_pow_tag_type) result.s_null_rd.state;
1422 }
1423 
1424 /**
1425  * Asynchronous work request.  Work is requested from the POW unit,
1426  * and should later be checked with function
1427  * cvmx_pow_work_response_async.  This function does NOT wait for
1428  * previous tag switches to complete, so the caller must ensure that
1429  * there is not a pending tag switch.
1430  *
1431  * @scr_addr: Scratch memory address that response will be returned
1432  *	      to, which is either a valid WQE, or a response with the
1433  *	      invalid bit set.	Byte address, must be 8 byte aligned.
1434  *
1435  * @wait: 1 to cause response to wait for work to become available (or
1436  *	  timeout), 0 to cause response to return immediately
1437  */
1438 static inline void cvmx_pow_work_request_async_nocheck(int scr_addr,
1439 						       cvmx_pow_wait_t wait)
1440 {
1441 	cvmx_pow_iobdma_store_t data;
1442 
1443 	if (CVMX_ENABLE_POW_CHECKS)
1444 		__cvmx_pow_warn_if_pending_switch(__func__);
1445 
1446 	/* scr_addr must be 8 byte aligned */
1447 	data.s.scraddr = scr_addr >> 3;
1448 	data.s.len = 1;
1449 	data.s.did = CVMX_OCT_DID_TAG_SWTAG;
1450 	data.s.wait = wait;
1451 	cvmx_send_single(data.u64);
1452 }
1453 
1454 /**
1455  * Asynchronous work request.  Work is requested from the POW unit,
1456  * and should later be checked with function
1457  * cvmx_pow_work_response_async.  This function waits for any previous
1458  * tag switch to complete before requesting the new work.
1459  *
1460  * @scr_addr: Scratch memory address that response will be returned
1461  *	      to, which is either a valid WQE, or a response with the
1462  *	      invalid bit set.	Byte address, must be 8 byte aligned.
1463  *
1464  * @wait: 1 to cause response to wait for work to become available (or
1465  *		    timeout), 0 to cause response to return immediately
1466  */
1467 static inline void cvmx_pow_work_request_async(int scr_addr,
1468 					       cvmx_pow_wait_t wait)
1469 {
1470 	if (CVMX_ENABLE_POW_CHECKS)
1471 		__cvmx_pow_warn_if_pending_switch(__func__);
1472 
1473 	/* Must not have a switch pending when requesting work */
1474 	cvmx_pow_tag_sw_wait();
1475 	cvmx_pow_work_request_async_nocheck(scr_addr, wait);
1476 }
1477 
1478 /**
1479  * Gets result of asynchronous work request.  Performs a IOBDMA sync
1480  * to wait for the response.
1481  *
1482  * @scr_addr: Scratch memory address to get result from Byte address,
1483  *	      must be 8 byte aligned.
1484  *
1485  * Returns Returns the WQE from the scratch register, or NULL if no
1486  * work was available.
1487  */
1488 static inline struct cvmx_wqe *cvmx_pow_work_response_async(int scr_addr)
1489 {
1490 	cvmx_pow_tag_load_resp_t result;
1491 
1492 	CVMX_SYNCIOBDMA;
1493 	result.u64 = cvmx_scratch_read64(scr_addr);
1494 
1495 	if (result.s_work.no_work)
1496 		return NULL;
1497 	else
1498 		return (struct cvmx_wqe *) cvmx_phys_to_ptr(result.s_work.addr);
1499 }
1500 
1501 /**
1502  * Checks if a work queue entry pointer returned by a work
1503  * request is valid.  It may be invalid due to no work
1504  * being available or due to a timeout.
1505  *
1506  * @wqe_ptr: pointer to a work queue entry returned by the POW
1507  *
1508  * Returns 0 if pointer is valid
1509  *	   1 if invalid (no work was returned)
1510  */
1511 static inline uint64_t cvmx_pow_work_invalid(struct cvmx_wqe *wqe_ptr)
1512 {
1513 	return wqe_ptr == NULL;
1514 }
1515 
1516 /**
1517  * Starts a tag switch to the provided tag value and tag type.
1518  * Completion for the tag switch must be checked for separately.  This
1519  * function does NOT update the work queue entry in dram to match tag
1520  * value and type, so the application must keep track of these if they
1521  * are important to the application.  This tag switch command must not
1522  * be used for switches to NULL, as the tag switch pending bit will be
1523  * set by the switch request, but never cleared by the hardware.
1524  *
1525  * NOTE: This should not be used when switching from a NULL tag.  Use
1526  * cvmx_pow_tag_sw_full() instead.
1527  *
1528  * This function does no checks, so the caller must ensure that any
1529  * previous tag switch has completed.
1530  *
1531  * @tag:      new tag value
1532  * @tag_type: new tag type (ordered or atomic)
1533  */
1534 static inline void cvmx_pow_tag_sw_nocheck(uint32_t tag,
1535 					   enum cvmx_pow_tag_type tag_type)
1536 {
1537 	cvmx_addr_t ptr;
1538 	cvmx_pow_tag_req_t tag_req;
1539 
1540 	if (CVMX_ENABLE_POW_CHECKS) {
1541 		cvmx_pow_tag_req_t current_tag;
1542 		__cvmx_pow_warn_if_pending_switch(__func__);
1543 		current_tag = cvmx_pow_get_current_tag();
1544 		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
1545 			pr_warn("%s called with NULL_NULL tag\n", __func__);
1546 		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
1547 			pr_warn("%s called with NULL tag\n", __func__);
1548 		if ((current_tag.s.type == tag_type)
1549 		   && (current_tag.s.tag == tag))
1550 			pr_warn("%s called to perform a tag switch to the same tag\n",
1551 				__func__);
1552 		if (tag_type == CVMX_POW_TAG_TYPE_NULL)
1553 			pr_warn("%s called to perform a tag switch to NULL. Use cvmx_pow_tag_sw_null() instead\n",
1554 				__func__);
1555 	}
1556 
1557 	/*
1558 	 * Note that WQE in DRAM is not updated here, as the POW does
1559 	 * not read from DRAM once the WQE is in flight.  See hardware
1560 	 * manual for complete details.	 It is the application's
1561 	 * responsibility to keep track of the current tag value if
1562 	 * that is important.
1563 	 */
1564 
1565 	tag_req.u64 = 0;
1566 	tag_req.s.op = CVMX_POW_TAG_OP_SWTAG;
1567 	tag_req.s.tag = tag;
1568 	tag_req.s.type = tag_type;
1569 
1570 	ptr.u64 = 0;
1571 	ptr.sio.mem_region = CVMX_IO_SEG;
1572 	ptr.sio.is_io = 1;
1573 	ptr.sio.did = CVMX_OCT_DID_TAG_SWTAG;
1574 
1575 	/* once this store arrives at POW, it will attempt the switch
1576 	   software must wait for the switch to complete separately */
1577 	cvmx_write_io(ptr.u64, tag_req.u64);
1578 }
1579 
1580 /**
1581  * Starts a tag switch to the provided tag value and tag type.
1582  * Completion for the tag switch must be checked for separately.  This
1583  * function does NOT update the work queue entry in dram to match tag
1584  * value and type, so the application must keep track of these if they
1585  * are important to the application.  This tag switch command must not
1586  * be used for switches to NULL, as the tag switch pending bit will be
1587  * set by the switch request, but never cleared by the hardware.
1588  *
1589  * NOTE: This should not be used when switching from a NULL tag.  Use
1590  * cvmx_pow_tag_sw_full() instead.
1591  *
1592  * This function waits for any previous tag switch to complete, and also
1593  * displays an error on tag switches to NULL.
1594  *
1595  * @tag:      new tag value
1596  * @tag_type: new tag type (ordered or atomic)
1597  */
1598 static inline void cvmx_pow_tag_sw(uint32_t tag,
1599 				   enum cvmx_pow_tag_type tag_type)
1600 {
1601 	if (CVMX_ENABLE_POW_CHECKS)
1602 		__cvmx_pow_warn_if_pending_switch(__func__);
1603 
1604 	/*
1605 	 * Note that WQE in DRAM is not updated here, as the POW does
1606 	 * not read from DRAM once the WQE is in flight.  See hardware
1607 	 * manual for complete details.	 It is the application's
1608 	 * responsibility to keep track of the current tag value if
1609 	 * that is important.
1610 	 */
1611 
1612 	/*
1613 	 * Ensure that there is not a pending tag switch, as a tag
1614 	 * switch cannot be started if a previous switch is still
1615 	 * pending.
1616 	 */
1617 	cvmx_pow_tag_sw_wait();
1618 	cvmx_pow_tag_sw_nocheck(tag, tag_type);
1619 }
1620 
1621 /**
1622  * Starts a tag switch to the provided tag value and tag type.
1623  * Completion for the tag switch must be checked for separately.  This
1624  * function does NOT update the work queue entry in dram to match tag
1625  * value and type, so the application must keep track of these if they
1626  * are important to the application.  This tag switch command must not
1627  * be used for switches to NULL, as the tag switch pending bit will be
1628  * set by the switch request, but never cleared by the hardware.
1629  *
1630  * This function must be used for tag switches from NULL.
1631  *
1632  * This function does no checks, so the caller must ensure that any
1633  * previous tag switch has completed.
1634  *
1635  * @wqp:      pointer to work queue entry to submit.  This entry is
1636  *	      updated to match the other parameters
1637  * @tag:      tag value to be assigned to work queue entry
1638  * @tag_type: type of tag
1639  * @group:    group value for the work queue entry.
1640  */
1641 static inline void cvmx_pow_tag_sw_full_nocheck(struct cvmx_wqe *wqp, uint32_t tag,
1642 						enum cvmx_pow_tag_type tag_type,
1643 						uint64_t group)
1644 {
1645 	cvmx_addr_t ptr;
1646 	cvmx_pow_tag_req_t tag_req;
1647 
1648 	if (CVMX_ENABLE_POW_CHECKS) {
1649 		cvmx_pow_tag_req_t current_tag;
1650 		__cvmx_pow_warn_if_pending_switch(__func__);
1651 		current_tag = cvmx_pow_get_current_tag();
1652 		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
1653 			pr_warn("%s called with NULL_NULL tag\n", __func__);
1654 		if ((current_tag.s.type == tag_type)
1655 		   && (current_tag.s.tag == tag))
1656 			pr_warn("%s called to perform a tag switch to the same tag\n",
1657 				__func__);
1658 		if (tag_type == CVMX_POW_TAG_TYPE_NULL)
1659 			pr_warn("%s called to perform a tag switch to NULL. Use cvmx_pow_tag_sw_null() instead\n",
1660 				__func__);
1661 		if (wqp != cvmx_phys_to_ptr(0x80))
1662 			if (wqp != cvmx_pow_get_current_wqp())
1663 				pr_warn("%s passed WQE(%p) doesn't match the address in the POW(%p)\n",
1664 					__func__, wqp,
1665 					cvmx_pow_get_current_wqp());
1666 	}
1667 
1668 	/*
1669 	 * Note that WQE in DRAM is not updated here, as the POW does
1670 	 * not read from DRAM once the WQE is in flight.  See hardware
1671 	 * manual for complete details.	 It is the application's
1672 	 * responsibility to keep track of the current tag value if
1673 	 * that is important.
1674 	 */
1675 
1676 	tag_req.u64 = 0;
1677 	tag_req.s.op = CVMX_POW_TAG_OP_SWTAG_FULL;
1678 	tag_req.s.tag = tag;
1679 	tag_req.s.type = tag_type;
1680 	tag_req.s.grp = group;
1681 
1682 	ptr.u64 = 0;
1683 	ptr.sio.mem_region = CVMX_IO_SEG;
1684 	ptr.sio.is_io = 1;
1685 	ptr.sio.did = CVMX_OCT_DID_TAG_SWTAG;
1686 	ptr.sio.offset = CAST64(wqp);
1687 
1688 	/*
1689 	 * once this store arrives at POW, it will attempt the switch
1690 	 * software must wait for the switch to complete separately.
1691 	 */
1692 	cvmx_write_io(ptr.u64, tag_req.u64);
1693 }
1694 
1695 /**
1696  * Starts a tag switch to the provided tag value and tag type.
1697  * Completion for the tag switch must be checked for separately.  This
1698  * function does NOT update the work queue entry in dram to match tag
1699  * value and type, so the application must keep track of these if they
1700  * are important to the application.  This tag switch command must not
1701  * be used for switches to NULL, as the tag switch pending bit will be
1702  * set by the switch request, but never cleared by the hardware.
1703  *
1704  * This function must be used for tag switches from NULL.
1705  *
1706  * This function waits for any pending tag switches to complete
1707  * before requesting the tag switch.
1708  *
1709  * @wqp:      pointer to work queue entry to submit.  This entry is updated
1710  *	      to match the other parameters
1711  * @tag:      tag value to be assigned to work queue entry
1712  * @tag_type: type of tag
1713  * @group:	group value for the work queue entry.
1714  */
1715 static inline void cvmx_pow_tag_sw_full(struct cvmx_wqe *wqp, uint32_t tag,
1716 					enum cvmx_pow_tag_type tag_type,
1717 					uint64_t group)
1718 {
1719 	if (CVMX_ENABLE_POW_CHECKS)
1720 		__cvmx_pow_warn_if_pending_switch(__func__);
1721 
1722 	/*
1723 	 * Ensure that there is not a pending tag switch, as a tag
1724 	 * switch cannot be started if a previous switch is still
1725 	 * pending.
1726 	 */
1727 	cvmx_pow_tag_sw_wait();
1728 	cvmx_pow_tag_sw_full_nocheck(wqp, tag, tag_type, group);
1729 }
1730 
1731 /**
1732  * Switch to a NULL tag, which ends any ordering or
1733  * synchronization provided by the POW for the current
1734  * work queue entry.  This operation completes immediately,
1735  * so completion should not be waited for.
1736  * This function does NOT wait for previous tag switches to complete,
1737  * so the caller must ensure that any previous tag switches have completed.
1738  */
1739 static inline void cvmx_pow_tag_sw_null_nocheck(void)
1740 {
1741 	cvmx_addr_t ptr;
1742 	cvmx_pow_tag_req_t tag_req;
1743 
1744 	if (CVMX_ENABLE_POW_CHECKS) {
1745 		cvmx_pow_tag_req_t current_tag;
1746 		__cvmx_pow_warn_if_pending_switch(__func__);
1747 		current_tag = cvmx_pow_get_current_tag();
1748 		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
1749 			pr_warn("%s called with NULL_NULL tag\n", __func__);
1750 		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
1751 			pr_warn("%s called when we already have a NULL tag\n",
1752 				__func__);
1753 	}
1754 
1755 	tag_req.u64 = 0;
1756 	tag_req.s.op = CVMX_POW_TAG_OP_SWTAG;
1757 	tag_req.s.type = CVMX_POW_TAG_TYPE_NULL;
1758 
1759 	ptr.u64 = 0;
1760 	ptr.sio.mem_region = CVMX_IO_SEG;
1761 	ptr.sio.is_io = 1;
1762 	ptr.sio.did = CVMX_OCT_DID_TAG_TAG1;
1763 
1764 	cvmx_write_io(ptr.u64, tag_req.u64);
1765 
1766 	/* switch to NULL completes immediately */
1767 }
1768 
1769 /**
1770  * Switch to a NULL tag, which ends any ordering or
1771  * synchronization provided by the POW for the current
1772  * work queue entry.  This operation completes immediately,
1773  * so completion should not be waited for.
1774  * This function waits for any pending tag switches to complete
1775  * before requesting the switch to NULL.
1776  */
1777 static inline void cvmx_pow_tag_sw_null(void)
1778 {
1779 	if (CVMX_ENABLE_POW_CHECKS)
1780 		__cvmx_pow_warn_if_pending_switch(__func__);
1781 
1782 	/*
1783 	 * Ensure that there is not a pending tag switch, as a tag
1784 	 * switch cannot be started if a previous switch is still
1785 	 * pending.
1786 	 */
1787 	cvmx_pow_tag_sw_wait();
1788 	cvmx_pow_tag_sw_null_nocheck();
1789 
1790 	/* switch to NULL completes immediately */
1791 }
1792 
1793 /**
1794  * Submits work to an input queue.  This function updates the work
1795  * queue entry in DRAM to match the arguments given.  Note that the
1796  * tag provided is for the work queue entry submitted, and is
1797  * unrelated to the tag that the core currently holds.
1798  *
1799  * @wqp:      pointer to work queue entry to submit.  This entry is
1800  *	      updated to match the other parameters
1801  * @tag:      tag value to be assigned to work queue entry
1802  * @tag_type: type of tag
1803  * @qos:      Input queue to add to.
1804  * @grp:      group value for the work queue entry.
1805  */
1806 static inline void cvmx_pow_work_submit(struct cvmx_wqe *wqp, uint32_t tag,
1807 					enum cvmx_pow_tag_type tag_type,
1808 					uint64_t qos, uint64_t grp)
1809 {
1810 	cvmx_addr_t ptr;
1811 	cvmx_pow_tag_req_t tag_req;
1812 
1813 	wqp->word1.tag = tag;
1814 	wqp->word1.tag_type = tag_type;
1815 
1816 	cvmx_wqe_set_qos(wqp, qos);
1817 	cvmx_wqe_set_grp(wqp, grp);
1818 
1819 	tag_req.u64 = 0;
1820 	tag_req.s.op = CVMX_POW_TAG_OP_ADDWQ;
1821 	tag_req.s.type = tag_type;
1822 	tag_req.s.tag = tag;
1823 	tag_req.s.qos = qos;
1824 	tag_req.s.grp = grp;
1825 
1826 	ptr.u64 = 0;
1827 	ptr.sio.mem_region = CVMX_IO_SEG;
1828 	ptr.sio.is_io = 1;
1829 	ptr.sio.did = CVMX_OCT_DID_TAG_TAG1;
1830 	ptr.sio.offset = cvmx_ptr_to_phys(wqp);
1831 
1832 	/*
1833 	 * SYNC write to memory before the work submit.	 This is
1834 	 * necessary as POW may read values from DRAM at this time.
1835 	 */
1836 	CVMX_SYNCWS;
1837 	cvmx_write_io(ptr.u64, tag_req.u64);
1838 }
1839 
1840 /**
1841  * This function sets the group mask for a core.  The group mask
1842  * indicates which groups each core will accept work from. There are
1843  * 16 groups.
1844  *
1845  * @core_num:	core to apply mask to
1846  * @mask:   Group mask. There are 16 groups, so only bits 0-15 are valid,
1847  *		 representing groups 0-15.
1848  *		 Each 1 bit in the mask enables the core to accept work from
1849  *		 the corresponding group.
1850  */
1851 static inline void cvmx_pow_set_group_mask(uint64_t core_num, uint64_t mask)
1852 {
1853 	union cvmx_pow_pp_grp_mskx grp_msk;
1854 
1855 	grp_msk.u64 = cvmx_read_csr(CVMX_POW_PP_GRP_MSKX(core_num));
1856 	grp_msk.s.grp_msk = mask;
1857 	cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(core_num), grp_msk.u64);
1858 }
1859 
1860 /**
1861  * This function sets POW static priorities for a core. Each input queue has
1862  * an associated priority value.
1863  *
1864  * @core_num:	core to apply priorities to
1865  * @priority:	Vector of 8 priorities, one per POW Input Queue (0-7).
1866  *		     Highest priority is 0 and lowest is 7. A priority value
1867  *		     of 0xF instructs POW to skip the Input Queue when
1868  *		     scheduling to this specific core.
1869  *		     NOTE: priorities should not have gaps in values, meaning
1870  *			   {0,1,1,1,1,1,1,1} is a valid configuration while
1871  *			   {0,2,2,2,2,2,2,2} is not.
1872  */
1873 static inline void cvmx_pow_set_priority(uint64_t core_num,
1874 					 const uint8_t priority[])
1875 {
1876 	/* POW priorities are supported on CN5xxx and later */
1877 	if (!OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
1878 		union cvmx_pow_pp_grp_mskx grp_msk;
1879 
1880 		grp_msk.u64 = cvmx_read_csr(CVMX_POW_PP_GRP_MSKX(core_num));
1881 		grp_msk.s.qos0_pri = priority[0];
1882 		grp_msk.s.qos1_pri = priority[1];
1883 		grp_msk.s.qos2_pri = priority[2];
1884 		grp_msk.s.qos3_pri = priority[3];
1885 		grp_msk.s.qos4_pri = priority[4];
1886 		grp_msk.s.qos5_pri = priority[5];
1887 		grp_msk.s.qos6_pri = priority[6];
1888 		grp_msk.s.qos7_pri = priority[7];
1889 
1890 		/* Detect gaps between priorities and flag error */
1891 		{
1892 			int i;
1893 			uint32_t prio_mask = 0;
1894 
1895 			for (i = 0; i < 8; i++)
1896 				if (priority[i] != 0xF)
1897 					prio_mask |= 1 << priority[i];
1898 
1899 			if (prio_mask ^ ((1 << cvmx_pop(prio_mask)) - 1)) {
1900 				pr_err("POW static priorities should be "
1901 				       "contiguous (0x%llx)\n",
1902 				     (unsigned long long)prio_mask);
1903 				return;
1904 			}
1905 		}
1906 
1907 		cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(core_num), grp_msk.u64);
1908 	}
1909 }
1910 
1911 /**
1912  * Performs a tag switch and then an immediate deschedule. This completes
1913  * immediately, so completion must not be waited for.  This function does NOT
1914  * update the wqe in DRAM to match arguments.
1915  *
1916  * This function does NOT wait for any prior tag switches to complete, so the
1917  * calling code must do this.
1918  *
1919  * Note the following CAVEAT of the Octeon HW behavior when
1920  * re-scheduling DE-SCHEDULEd items whose (next) state is
1921  * ORDERED:
1922  *   - If there are no switches pending at the time that the
1923  *     HW executes the de-schedule, the HW will only re-schedule
1924  *     the head of the FIFO associated with the given tag. This
1925  *     means that in many respects, the HW treats this ORDERED
1926  *     tag as an ATOMIC tag. Note that in the SWTAG_DESCH
1927  *     case (to an ORDERED tag), the HW will do the switch
1928  *     before the deschedule whenever it is possible to do
1929  *     the switch immediately, so it may often look like
1930  *     this case.
1931  *   - If there is a pending switch to ORDERED at the time
1932  *     the HW executes the de-schedule, the HW will perform
1933  *     the switch at the time it re-schedules, and will be
1934  *     able to reschedule any/all of the entries with the
1935  *     same tag.
1936  * Due to this behavior, the RECOMMENDATION to software is
1937  * that they have a (next) state of ATOMIC when they
1938  * DE-SCHEDULE. If an ORDERED tag is what was really desired,
1939  * SW can choose to immediately switch to an ORDERED tag
1940  * after the work (that has an ATOMIC tag) is re-scheduled.
1941  * Note that since there are never any tag switches pending
1942  * when the HW re-schedules, this switch can be IMMEDIATE upon
1943  * the reception of the pointer during the re-schedule.
1944  *
1945  * @tag:      New tag value
1946  * @tag_type: New tag type
1947  * @group:    New group value
1948  * @no_sched: Control whether this work queue entry will be rescheduled.
1949  *		   - 1 : don't schedule this work
1950  *		   - 0 : allow this work to be scheduled.
1951  */
1952 static inline void cvmx_pow_tag_sw_desched_nocheck(
1953 	uint32_t tag,
1954 	enum cvmx_pow_tag_type tag_type,
1955 	uint64_t group,
1956 	uint64_t no_sched)
1957 {
1958 	cvmx_addr_t ptr;
1959 	cvmx_pow_tag_req_t tag_req;
1960 
1961 	if (CVMX_ENABLE_POW_CHECKS) {
1962 		cvmx_pow_tag_req_t current_tag;
1963 		__cvmx_pow_warn_if_pending_switch(__func__);
1964 		current_tag = cvmx_pow_get_current_tag();
1965 		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
1966 			pr_warn("%s called with NULL_NULL tag\n", __func__);
1967 		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
1968 			pr_warn("%s called with NULL tag. Deschedule not allowed from NULL state\n",
1969 				__func__);
1970 		if ((current_tag.s.type != CVMX_POW_TAG_TYPE_ATOMIC)
1971 			&& (tag_type != CVMX_POW_TAG_TYPE_ATOMIC))
1972 			pr_warn("%s called where neither the before or after tag is ATOMIC\n",
1973 				__func__);
1974 	}
1975 
1976 	tag_req.u64 = 0;
1977 	tag_req.s.op = CVMX_POW_TAG_OP_SWTAG_DESCH;
1978 	tag_req.s.tag = tag;
1979 	tag_req.s.type = tag_type;
1980 	tag_req.s.grp = group;
1981 	tag_req.s.no_sched = no_sched;
1982 
1983 	ptr.u64 = 0;
1984 	ptr.sio.mem_region = CVMX_IO_SEG;
1985 	ptr.sio.is_io = 1;
1986 	ptr.sio.did = CVMX_OCT_DID_TAG_TAG3;
1987 	/*
1988 	 * since TAG3 is used, this store will clear the local pending
1989 	 * switch bit.
1990 	 */
1991 	cvmx_write_io(ptr.u64, tag_req.u64);
1992 }
1993 
1994 /**
1995  * Performs a tag switch and then an immediate deschedule. This completes
1996  * immediately, so completion must not be waited for.  This function does NOT
1997  * update the wqe in DRAM to match arguments.
1998  *
1999  * This function waits for any prior tag switches to complete, so the
2000  * calling code may call this function with a pending tag switch.
2001  *
2002  * Note the following CAVEAT of the Octeon HW behavior when
2003  * re-scheduling DE-SCHEDULEd items whose (next) state is
2004  * ORDERED:
2005  *   - If there are no switches pending at the time that the
2006  *     HW executes the de-schedule, the HW will only re-schedule
2007  *     the head of the FIFO associated with the given tag. This
2008  *     means that in many respects, the HW treats this ORDERED
2009  *     tag as an ATOMIC tag. Note that in the SWTAG_DESCH
2010  *     case (to an ORDERED tag), the HW will do the switch
2011  *     before the deschedule whenever it is possible to do
2012  *     the switch immediately, so it may often look like
2013  *     this case.
2014  *   - If there is a pending switch to ORDERED at the time
2015  *     the HW executes the de-schedule, the HW will perform
2016  *     the switch at the time it re-schedules, and will be
2017  *     able to reschedule any/all of the entries with the
2018  *     same tag.
2019  * Due to this behavior, the RECOMMENDATION to software is
2020  * that they have a (next) state of ATOMIC when they
2021  * DE-SCHEDULE. If an ORDERED tag is what was really desired,
2022  * SW can choose to immediately switch to an ORDERED tag
2023  * after the work (that has an ATOMIC tag) is re-scheduled.
2024  * Note that since there are never any tag switches pending
2025  * when the HW re-schedules, this switch can be IMMEDIATE upon
2026  * the reception of the pointer during the re-schedule.
2027  *
2028  * @tag:      New tag value
2029  * @tag_type: New tag type
2030  * @group:    New group value
2031  * @no_sched: Control whether this work queue entry will be rescheduled.
2032  *		   - 1 : don't schedule this work
2033  *		   - 0 : allow this work to be scheduled.
2034  */
2035 static inline void cvmx_pow_tag_sw_desched(uint32_t tag,
2036 					   enum cvmx_pow_tag_type tag_type,
2037 					   uint64_t group, uint64_t no_sched)
2038 {
2039 	if (CVMX_ENABLE_POW_CHECKS)
2040 		__cvmx_pow_warn_if_pending_switch(__func__);
2041 
2042 	/* Need to make sure any writes to the work queue entry are complete */
2043 	CVMX_SYNCWS;
2044 	/*
2045 	 * Ensure that there is not a pending tag switch, as a tag
2046 	 * switch cannot be started if a previous switch is still
2047 	 * pending.
2048 	 */
2049 	cvmx_pow_tag_sw_wait();
2050 	cvmx_pow_tag_sw_desched_nocheck(tag, tag_type, group, no_sched);
2051 }
2052 
2053 /**
2054  * Deschedules the current work queue entry.
2055  *
2056  * @no_sched: no schedule flag value to be set on the work queue
2057  *	      entry.  If this is set the entry will not be
2058  *	      rescheduled.
2059  */
2060 static inline void cvmx_pow_desched(uint64_t no_sched)
2061 {
2062 	cvmx_addr_t ptr;
2063 	cvmx_pow_tag_req_t tag_req;
2064 
2065 	if (CVMX_ENABLE_POW_CHECKS) {
2066 		cvmx_pow_tag_req_t current_tag;
2067 		__cvmx_pow_warn_if_pending_switch(__func__);
2068 		current_tag = cvmx_pow_get_current_tag();
2069 		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
2070 			pr_warn("%s called with NULL_NULL tag\n", __func__);
2071 		if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
2072 			pr_warn("%s called with NULL tag. Deschedule not expected from NULL state\n",
2073 				__func__);
2074 	}
2075 
2076 	/* Need to make sure any writes to the work queue entry are complete */
2077 	CVMX_SYNCWS;
2078 
2079 	tag_req.u64 = 0;
2080 	tag_req.s.op = CVMX_POW_TAG_OP_DESCH;
2081 	tag_req.s.no_sched = no_sched;
2082 
2083 	ptr.u64 = 0;
2084 	ptr.sio.mem_region = CVMX_IO_SEG;
2085 	ptr.sio.is_io = 1;
2086 	ptr.sio.did = CVMX_OCT_DID_TAG_TAG3;
2087 	/*
2088 	 * since TAG3 is used, this store will clear the local pending
2089 	 * switch bit.
2090 	 */
2091 	cvmx_write_io(ptr.u64, tag_req.u64);
2092 }
2093 
2094 /****************************************************
2095 * Define usage of bits within the 32 bit tag values.
2096 *****************************************************/
2097 
2098 /*
2099  * Number of bits of the tag used by software.	The SW bits are always
2100  * a contiguous block of the high starting at bit 31.  The hardware
2101  * bits are always the low bits.  By default, the top 8 bits of the
2102  * tag are reserved for software, and the low 24 are set by the IPD
2103  * unit.
2104  */
2105 #define CVMX_TAG_SW_BITS    (8)
2106 #define CVMX_TAG_SW_SHIFT   (32 - CVMX_TAG_SW_BITS)
2107 
2108 /* Below is the list of values for the top 8 bits of the tag. */
2109 /*
2110  * Tag values with top byte of this value are reserved for internal
2111  * executive uses.
2112  */
2113 #define CVMX_TAG_SW_BITS_INTERNAL  0x1
2114 /* The executive divides the remaining 24 bits as follows:
2115  *  - the upper 8 bits (bits 23 - 16 of the tag) define a subgroup
2116  *
2117  *  - the lower 16 bits (bits 15 - 0 of the tag) define are the value
2118  *    with the subgroup
2119  *
2120  * Note that this section describes the format of tags generated by
2121  * software - refer to the hardware documentation for a description of
2122  * the tags values generated by the packet input hardware.  Subgroups
2123  * are defined here.
2124  */
2125 /* Mask for the value portion of the tag */
2126 #define CVMX_TAG_SUBGROUP_MASK	0xFFFF
2127 #define CVMX_TAG_SUBGROUP_SHIFT 16
2128 #define CVMX_TAG_SUBGROUP_PKO  0x1
2129 
2130 /* End of executive tag subgroup definitions */
2131 
2132 /*
2133  * The remaining values software bit values 0x2 - 0xff are available
2134  * for application use.
2135  */
2136 
2137 /**
2138  * This function creates a 32 bit tag value from the two values provided.
2139  *
2140  * @sw_bits: The upper bits (number depends on configuration) are set
2141  *	     to this value.  The remainder of bits are set by the
2142  *	     hw_bits parameter.
2143  *
2144  * @hw_bits: The lower bits (number depends on configuration) are set
2145  *	     to this value.  The remainder of bits are set by the
2146  *	     sw_bits parameter.
2147  *
2148  * Returns 32 bit value of the combined hw and sw bits.
2149  */
2150 static inline uint32_t cvmx_pow_tag_compose(uint64_t sw_bits, uint64_t hw_bits)
2151 {
2152 	return ((sw_bits & cvmx_build_mask(CVMX_TAG_SW_BITS)) <<
2153 			CVMX_TAG_SW_SHIFT) |
2154 		(hw_bits & cvmx_build_mask(32 - CVMX_TAG_SW_BITS));
2155 }
2156 
2157 /**
2158  * Extracts the bits allocated for software use from the tag
2159  *
2160  * @tag:    32 bit tag value
2161  *
2162  * Returns N bit software tag value, where N is configurable with the
2163  * CVMX_TAG_SW_BITS define
2164  */
2165 static inline uint32_t cvmx_pow_tag_get_sw_bits(uint64_t tag)
2166 {
2167 	return (tag >> (32 - CVMX_TAG_SW_BITS)) &
2168 		cvmx_build_mask(CVMX_TAG_SW_BITS);
2169 }
2170 
2171 /**
2172  *
2173  * Extracts the bits allocated for hardware use from the tag
2174  *
2175  * @tag:    32 bit tag value
2176  *
2177  * Returns (32 - N) bit software tag value, where N is configurable
2178  * with the CVMX_TAG_SW_BITS define
2179  */
2180 static inline uint32_t cvmx_pow_tag_get_hw_bits(uint64_t tag)
2181 {
2182 	return tag & cvmx_build_mask(32 - CVMX_TAG_SW_BITS);
2183 }
2184 
2185 /**
2186  * Store the current POW internal state into the supplied
2187  * buffer. It is recommended that you pass a buffer of at least
2188  * 128KB. The format of the capture may change based on SDK
2189  * version and Octeon chip.
2190  *
2191  * @buffer: Buffer to store capture into
2192  * @buffer_size:
2193  *		 The size of the supplied buffer
2194  *
2195  * Returns Zero on success, negative on failure
2196  */
2197 extern int cvmx_pow_capture(void *buffer, int buffer_size);
2198 
2199 /**
2200  * Dump a POW capture to the console in a human readable format.
2201  *
2202  * @buffer: POW capture from cvmx_pow_capture()
2203  * @buffer_size:
2204  *		 Size of the buffer
2205  */
2206 extern void cvmx_pow_display(void *buffer, int buffer_size);
2207 
2208 /**
2209  * Return the number of POW entries supported by this chip
2210  *
2211  * Returns Number of POW entries
2212  */
2213 extern int cvmx_pow_get_num_entries(void);
2214 
2215 #endif /* __CVMX_POW_H__ */
2216