1 /***********************license start***************
2  * Author: Cavium Networks
3  *
4  * Contact: support@caviumnetworks.com
5  * This file is part of the OCTEON SDK
6  *
7  * Copyright (c) 2003-2008 Cavium Networks
8  *
9  * This file is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License, Version 2, as
11  * published by the Free Software Foundation.
12  *
13  * This file is distributed in the hope that it will be useful, but
14  * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
15  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
16  * NONINFRINGEMENT.  See the GNU General Public License for more
17  * details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this file; if not, write to the Free Software
21  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
22  * or visit http://www.gnu.org/licenses/.
23  *
24  * This file may also be available under a different license from Cavium.
25  * Contact Cavium Networks for more information
26  ***********************license end**************************************/
27 
28 /*
29  *
30  * Helper functions for common, but complicated tasks.
31  *
32  */
33 
34 #ifndef __CVMX_HELPER_H__
35 #define __CVMX_HELPER_H__
36 
37 #include <asm/octeon/cvmx-config.h>
38 #include <asm/octeon/cvmx-fpa.h>
39 #include <asm/octeon/cvmx-wqe.h>
40 
41 typedef enum {
42 	CVMX_HELPER_INTERFACE_MODE_DISABLED,
43 	CVMX_HELPER_INTERFACE_MODE_RGMII,
44 	CVMX_HELPER_INTERFACE_MODE_GMII,
45 	CVMX_HELPER_INTERFACE_MODE_SPI,
46 	CVMX_HELPER_INTERFACE_MODE_PCIE,
47 	CVMX_HELPER_INTERFACE_MODE_XAUI,
48 	CVMX_HELPER_INTERFACE_MODE_SGMII,
49 	CVMX_HELPER_INTERFACE_MODE_PICMG,
50 	CVMX_HELPER_INTERFACE_MODE_NPI,
51 	CVMX_HELPER_INTERFACE_MODE_LOOP,
52 } cvmx_helper_interface_mode_t;
53 
54 typedef union {
55 	uint64_t u64;
56 	struct {
57 		uint64_t reserved_20_63:44;
58 		uint64_t link_up:1;	    /**< Is the physical link up? */
59 		uint64_t full_duplex:1;	    /**< 1 if the link is full duplex */
60 		uint64_t speed:18;	    /**< Speed of the link in Mbps */
61 	} s;
62 } cvmx_helper_link_info_t;
63 
64 #include <asm/octeon/cvmx-helper-errata.h>
65 #include <asm/octeon/cvmx-helper-loop.h>
66 #include <asm/octeon/cvmx-helper-npi.h>
67 #include <asm/octeon/cvmx-helper-rgmii.h>
68 #include <asm/octeon/cvmx-helper-sgmii.h>
69 #include <asm/octeon/cvmx-helper-spi.h>
70 #include <asm/octeon/cvmx-helper-util.h>
71 #include <asm/octeon/cvmx-helper-xaui.h>
72 
73 /**
74  * cvmx_override_pko_queue_priority(int ipd_port, uint64_t
75  * priorities[16]) is a function pointer. It is meant to allow
76  * customization of the PKO queue priorities based on the port
77  * number. Users should set this pointer to a function before
78  * calling any cvmx-helper operations.
79  */
80 extern void (*cvmx_override_pko_queue_priority) (int pko_port,
81 						 uint64_t priorities[16]);
82 
83 /**
84  * cvmx_override_ipd_port_setup(int ipd_port) is a function
85  * pointer. It is meant to allow customization of the IPD port
86  * setup before packet input/output comes online. It is called
87  * after cvmx-helper does the default IPD configuration, but
88  * before IPD is enabled. Users should set this pointer to a
89  * function before calling any cvmx-helper operations.
90  */
91 extern void (*cvmx_override_ipd_port_setup) (int ipd_port);
92 
93 /**
94  * This function enables the IPD and also enables the packet interfaces.
95  * The packet interfaces (RGMII and SPI) must be enabled after the
96  * IPD.	 This should be called by the user program after any additional
97  * IPD configuration changes are made if CVMX_HELPER_ENABLE_IPD
98  * is not set in the executive-config.h file.
99  *
100  * Returns 0 on success
101  *	   -1 on failure
102  */
103 extern int cvmx_helper_ipd_and_packet_input_enable(void);
104 
105 /**
106  * Initialize the PIP, IPD, and PKO hardware to support
107  * simple priority based queues for the ethernet ports. Each
108  * port is configured with a number of priority queues based
109  * on CVMX_PKO_QUEUES_PER_PORT_* where each queue is lower
110  * priority than the previous.
111  *
112  * Returns Zero on success, non-zero on failure
113  */
114 extern int cvmx_helper_initialize_packet_io_global(void);
115 
116 /**
117  * Does core local initialization for packet io
118  *
119  * Returns Zero on success, non-zero on failure
120  */
121 extern int cvmx_helper_initialize_packet_io_local(void);
122 
123 /**
124  * Returns the number of ports on the given interface.
125  * The interface must be initialized before the port count
126  * can be returned.
127  *
128  * @interface: Which interface to return port count for.
129  *
130  * Returns Port count for interface
131  *	   -1 for uninitialized interface
132  */
133 extern int cvmx_helper_ports_on_interface(int interface);
134 
135 /**
136  * Return the number of interfaces the chip has. Each interface
137  * may have multiple ports. Most chips support two interfaces,
138  * but the CNX0XX and CNX1XX are exceptions. These only support
139  * one interface.
140  *
141  * Returns Number of interfaces on chip
142  */
143 extern int cvmx_helper_get_number_of_interfaces(void);
144 
145 /**
146  * Get the operating mode of an interface. Depending on the Octeon
147  * chip and configuration, this function returns an enumeration
148  * of the type of packet I/O supported by an interface.
149  *
150  * @interface: Interface to probe
151  *
152  * Returns Mode of the interface. Unknown or unsupported interfaces return
153  *	   DISABLED.
154  */
155 extern cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int
156 								   interface);
157 
158 /**
159  * Return the link state of an IPD/PKO port as returned by
160  * auto negotiation. The result of this function may not match
161  * Octeon's link config if auto negotiation has changed since
162  * the last call to cvmx_helper_link_set().
163  *
164  * @ipd_port: IPD/PKO port to query
165  *
166  * Returns Link state
167  */
168 extern cvmx_helper_link_info_t cvmx_helper_link_get(int ipd_port);
169 
170 /**
171  * Configure an IPD/PKO port for the specified link state. This
172  * function does not influence auto negotiation at the PHY level.
173  * The passed link state must always match the link state returned
174  * by cvmx_helper_link_get().
175  *
176  * @ipd_port:  IPD/PKO port to configure
177  * @link_info: The new link state
178  *
179  * Returns Zero on success, negative on failure
180  */
181 extern int cvmx_helper_link_set(int ipd_port,
182 				cvmx_helper_link_info_t link_info);
183 
184 /**
185  * This function probes an interface to determine the actual
186  * number of hardware ports connected to it. It doesn't setup the
187  * ports or enable them. The main goal here is to set the global
188  * interface_port_count[interface] correctly. Hardware setup of the
189  * ports will be performed later.
190  *
191  * @interface: Interface to probe
192  *
193  * Returns Zero on success, negative on failure
194  */
195 extern int cvmx_helper_interface_probe(int interface);
196 extern int cvmx_helper_interface_enumerate(int interface);
197 
198 /**
199  * Configure a port for internal and/or external loopback. Internal loopback
200  * causes packets sent by the port to be received by Octeon. External loopback
201  * causes packets received from the wire to sent out again.
202  *
203  * @ipd_port: IPD/PKO port to loopback.
204  * @enable_internal:
205  *		   Non zero if you want internal loopback
206  * @enable_external:
207  *		   Non zero if you want external loopback
208  *
209  * Returns Zero on success, negative on failure.
210  */
211 extern int cvmx_helper_configure_loopback(int ipd_port, int enable_internal,
212 					  int enable_external);
213 
214 #endif /* __CVMX_HELPER_H__ */
215