1 /* SPDX-License-Identifier: GPL-2.0-only */ 2 /* 3 * 4 * Parts of this file are based on Ralink's 2.6.21 BSP 5 * 6 * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> 7 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> 8 * Copyright (C) 2013 John Crispin <john@phrozen.org> 9 */ 10 11 #ifndef _RT288X_REGS_H_ 12 #define _RT288X_REGS_H_ 13 14 #define RT2880_SYSC_BASE 0x00300000 15 16 #define SYSC_REG_CHIP_NAME0 0x00 17 #define SYSC_REG_CHIP_NAME1 0x04 18 #define SYSC_REG_CHIP_ID 0x0c 19 #define SYSC_REG_SYSTEM_CONFIG 0x10 20 #define SYSC_REG_CLKCFG 0x30 21 22 #define RT2880_CHIP_NAME0 0x38325452 23 #define RT2880_CHIP_NAME1 0x20203038 24 25 #define CHIP_ID_ID_MASK 0xff 26 #define CHIP_ID_ID_SHIFT 8 27 #define CHIP_ID_REV_MASK 0xff 28 29 #define SYSTEM_CONFIG_CPUCLK_SHIFT 20 30 #define SYSTEM_CONFIG_CPUCLK_MASK 0x3 31 #define SYSTEM_CONFIG_CPUCLK_250 0x0 32 #define SYSTEM_CONFIG_CPUCLK_266 0x1 33 #define SYSTEM_CONFIG_CPUCLK_280 0x2 34 #define SYSTEM_CONFIG_CPUCLK_300 0x3 35 36 #define RT2880_GPIO_MODE_I2C BIT(0) 37 #define RT2880_GPIO_MODE_UART0 BIT(1) 38 #define RT2880_GPIO_MODE_SPI BIT(2) 39 #define RT2880_GPIO_MODE_UART1 BIT(3) 40 #define RT2880_GPIO_MODE_JTAG BIT(4) 41 #define RT2880_GPIO_MODE_MDIO BIT(5) 42 #define RT2880_GPIO_MODE_SDRAM BIT(6) 43 #define RT2880_GPIO_MODE_PCI BIT(7) 44 45 #define CLKCFG_SRAM_CS_N_WDT BIT(9) 46 47 #define RT2880_SDRAM_BASE 0x08000000 48 #define RT2880_MEM_SIZE_MIN 2 49 #define RT2880_MEM_SIZE_MAX 128 50 51 #endif 52