1 /* 2 * This program is free software; you can redistribute it and/or modify it 3 * under the terms of the GNU General Public License version 2 as published 4 * by the Free Software Foundation. 5 * 6 * Copyright (C) 2010 John Crispin <john@phrozen.org> 7 */ 8 9 #ifndef _LTQ_XWAY_H__ 10 #define _LTQ_XWAY_H__ 11 12 #ifdef CONFIG_SOC_TYPE_XWAY 13 14 #include <lantiq.h> 15 16 /* Chip IDs */ 17 #define SOC_ID_DANUBE1 0x129 18 #define SOC_ID_DANUBE2 0x12B 19 #define SOC_ID_TWINPASS 0x12D 20 #define SOC_ID_AMAZON_SE_1 0x152 /* 50601 */ 21 #define SOC_ID_AMAZON_SE_2 0x153 /* 50600 */ 22 #define SOC_ID_ARX188 0x16C 23 #define SOC_ID_ARX168_1 0x16D 24 #define SOC_ID_ARX168_2 0x16E 25 #define SOC_ID_ARX182 0x16F 26 #define SOC_ID_GRX188 0x170 27 #define SOC_ID_GRX168 0x171 28 29 #define SOC_ID_VRX288 0x1C0 /* v1.1 */ 30 #define SOC_ID_VRX282 0x1C1 /* v1.1 */ 31 #define SOC_ID_VRX268 0x1C2 /* v1.1 */ 32 #define SOC_ID_GRX268 0x1C8 /* v1.1 */ 33 #define SOC_ID_GRX288 0x1C9 /* v1.1 */ 34 #define SOC_ID_VRX288_2 0x00B /* v1.2 */ 35 #define SOC_ID_VRX268_2 0x00C /* v1.2 */ 36 #define SOC_ID_GRX288_2 0x00D /* v1.2 */ 37 #define SOC_ID_GRX282_2 0x00E /* v1.2 */ 38 #define SOC_ID_VRX220 0x000 39 40 #define SOC_ID_ARX362 0x004 41 #define SOC_ID_ARX368 0x005 42 #define SOC_ID_ARX382 0x007 43 #define SOC_ID_ARX388 0x008 44 #define SOC_ID_URX388 0x009 45 #define SOC_ID_GRX383 0x010 46 #define SOC_ID_GRX369 0x011 47 #define SOC_ID_GRX387 0x00F 48 #define SOC_ID_GRX389 0x012 49 50 /* SoC Types */ 51 #define SOC_TYPE_DANUBE 0x01 52 #define SOC_TYPE_TWINPASS 0x02 53 #define SOC_TYPE_AR9 0x03 54 #define SOC_TYPE_VR9 0x04 /* v1.1 */ 55 #define SOC_TYPE_VR9_2 0x05 /* v1.2 */ 56 #define SOC_TYPE_AMAZON_SE 0x06 57 #define SOC_TYPE_AR10 0x07 58 #define SOC_TYPE_GRX390 0x08 59 #define SOC_TYPE_VRX220 0x09 60 61 /* BOOT_SEL - find what boot media we have */ 62 #define BS_EXT_ROM 0x0 63 #define BS_FLASH 0x1 64 #define BS_MII0 0x2 65 #define BS_PCI 0x3 66 #define BS_UART1 0x4 67 #define BS_SPI 0x5 68 #define BS_NAND 0x6 69 #define BS_RMII0 0x7 70 71 /* helpers used to access the cgu */ 72 #define ltq_cgu_w32(x, y) ltq_w32((x), ltq_cgu_membase + (y)) 73 #define ltq_cgu_r32(x) ltq_r32(ltq_cgu_membase + (x)) 74 extern __iomem void *ltq_cgu_membase; 75 76 /* 77 * during early_printk no ioremap is possible 78 * let's use KSEG1 instead 79 */ 80 #define LTQ_ASC1_BASE_ADDR 0x1E100C00 81 #define LTQ_EARLY_ASC KSEG1ADDR(LTQ_ASC1_BASE_ADDR) 82 83 /* EBU - external bus unit */ 84 #define LTQ_EBU_BUSCON0 0x0060 85 #define LTQ_EBU_PCC_CON 0x0090 86 #define LTQ_EBU_PCC_IEN 0x00A4 87 #define LTQ_EBU_PCC_ISTAT 0x00A0 88 #define LTQ_EBU_BUSCON1 0x0064 89 #define LTQ_EBU_ADDRSEL1 0x0024 90 #define EBU_WRDIS 0x80000000 91 92 /* WDT */ 93 #define LTQ_RST_CAUSE_WDTRST 0x20 94 95 /* MPS - multi processor unit (voice) */ 96 #define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000) 97 #define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344)) 98 99 /* allow booting xrx200 phys */ 100 int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr); 101 102 /* request a non-gpio and set the PIO config */ 103 #define PMU_PPE BIT(13) 104 extern void ltq_pmu_enable(unsigned int module); 105 extern void ltq_pmu_disable(unsigned int module); 106 107 #endif /* CONFIG_SOC_TYPE_XWAY */ 108 #endif /* _LTQ_XWAY_H__ */ 109