1 /* 2 * 3 * BRIEF MODULE DESCRIPTION 4 * Include file for Alchemy Semiconductor's Au1550 Descriptor 5 * Based DMA Controller. 6 * 7 * Copyright 2004 Embedded Edge, LLC 8 * dan@embeddededge.com 9 * 10 * This program is free software; you can redistribute it and/or modify it 11 * under the terms of the GNU General Public License as published by the 12 * Free Software Foundation; either version 2 of the License, or (at your 13 * option) any later version. 14 * 15 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED 16 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 17 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 18 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 21 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 22 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 * 26 * You should have received a copy of the GNU General Public License along 27 * with this program; if not, write to the Free Software Foundation, Inc., 28 * 675 Mass Ave, Cambridge, MA 02139, USA. 29 */ 30 31 /* 32 * Specifics for the Au1xxx Descriptor-Based DMA Controller, 33 * first seen in the AU1550 part. 34 */ 35 #ifndef _AU1000_DBDMA_H_ 36 #define _AU1000_DBDMA_H_ 37 38 #ifndef _LANGUAGE_ASSEMBLY 39 40 typedef volatile struct dbdma_global { 41 u32 ddma_config; 42 u32 ddma_intstat; 43 u32 ddma_throttle; 44 u32 ddma_inten; 45 } dbdma_global_t; 46 47 /* General Configuration. */ 48 #define DDMA_CONFIG_AF (1 << 2) 49 #define DDMA_CONFIG_AH (1 << 1) 50 #define DDMA_CONFIG_AL (1 << 0) 51 52 #define DDMA_THROTTLE_EN (1 << 31) 53 54 /* The structure of a DMA Channel. */ 55 typedef volatile struct au1xxx_dma_channel { 56 u32 ddma_cfg; /* See below */ 57 u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */ 58 u32 ddma_statptr; /* word aligned pointer to status word */ 59 u32 ddma_dbell; /* A write activates channel operation */ 60 u32 ddma_irq; /* If bit 0 set, interrupt pending */ 61 u32 ddma_stat; /* See below */ 62 u32 ddma_bytecnt; /* Byte count, valid only when chan idle */ 63 /* Remainder, up to the 256 byte boundary, is reserved. */ 64 } au1x_dma_chan_t; 65 66 #define DDMA_CFG_SED (1 << 9) /* source DMA level/edge detect */ 67 #define DDMA_CFG_SP (1 << 8) /* source DMA polarity */ 68 #define DDMA_CFG_DED (1 << 7) /* destination DMA level/edge detect */ 69 #define DDMA_CFG_DP (1 << 6) /* destination DMA polarity */ 70 #define DDMA_CFG_SYNC (1 << 5) /* Sync static bus controller */ 71 #define DDMA_CFG_PPR (1 << 4) /* PCI posted read/write control */ 72 #define DDMA_CFG_DFN (1 << 3) /* Descriptor fetch non-coherent */ 73 #define DDMA_CFG_SBE (1 << 2) /* Source big endian */ 74 #define DDMA_CFG_DBE (1 << 1) /* Destination big endian */ 75 #define DDMA_CFG_EN (1 << 0) /* Channel enable */ 76 77 /* 78 * Always set when descriptor processing done, regardless of 79 * interrupt enable state. Reflected in global intstat, don't 80 * clear this until global intstat is read/used. 81 */ 82 #define DDMA_IRQ_IN (1 << 0) 83 84 #define DDMA_STAT_DB (1 << 2) /* Doorbell pushed */ 85 #define DDMA_STAT_V (1 << 1) /* Descriptor valid */ 86 #define DDMA_STAT_H (1 << 0) /* Channel Halted */ 87 88 /* 89 * "Standard" DDMA Descriptor. 90 * Must be 32-byte aligned. 91 */ 92 typedef volatile struct au1xxx_ddma_desc { 93 u32 dscr_cmd0; /* See below */ 94 u32 dscr_cmd1; /* See below */ 95 u32 dscr_source0; /* source phys address */ 96 u32 dscr_source1; /* See below */ 97 u32 dscr_dest0; /* Destination address */ 98 u32 dscr_dest1; /* See below */ 99 u32 dscr_stat; /* completion status */ 100 u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */ 101 /* 102 * First 32 bytes are HW specific!!! 103 * Lets have some SW data following -- make sure it's 32 bytes. 104 */ 105 u32 sw_status; 106 u32 sw_context; 107 u32 sw_reserved[6]; 108 } au1x_ddma_desc_t; 109 110 #define DSCR_CMD0_V (1 << 31) /* Descriptor valid */ 111 #define DSCR_CMD0_MEM (1 << 30) /* mem-mem transfer */ 112 #define DSCR_CMD0_SID_MASK (0x1f << 25) /* Source ID */ 113 #define DSCR_CMD0_DID_MASK (0x1f << 20) /* Destination ID */ 114 #define DSCR_CMD0_SW_MASK (0x3 << 18) /* Source Width */ 115 #define DSCR_CMD0_DW_MASK (0x3 << 16) /* Destination Width */ 116 #define DSCR_CMD0_ARB (0x1 << 15) /* Set for Hi Pri */ 117 #define DSCR_CMD0_DT_MASK (0x3 << 13) /* Descriptor Type */ 118 #define DSCR_CMD0_SN (0x1 << 12) /* Source non-coherent */ 119 #define DSCR_CMD0_DN (0x1 << 11) /* Destination non-coherent */ 120 #define DSCR_CMD0_SM (0x1 << 10) /* Stride mode */ 121 #define DSCR_CMD0_IE (0x1 << 8) /* Interrupt Enable */ 122 #define DSCR_CMD0_SP (0x1 << 4) /* Status pointer select */ 123 #define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */ 124 #define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */ 125 126 #define SW_STATUS_INUSE (1 << 0) 127 128 /* Command 0 device IDs. */ 129 #define AU1550_DSCR_CMD0_UART0_TX 0 130 #define AU1550_DSCR_CMD0_UART0_RX 1 131 #define AU1550_DSCR_CMD0_UART3_TX 2 132 #define AU1550_DSCR_CMD0_UART3_RX 3 133 #define AU1550_DSCR_CMD0_DMA_REQ0 4 134 #define AU1550_DSCR_CMD0_DMA_REQ1 5 135 #define AU1550_DSCR_CMD0_DMA_REQ2 6 136 #define AU1550_DSCR_CMD0_DMA_REQ3 7 137 #define AU1550_DSCR_CMD0_USBDEV_RX0 8 138 #define AU1550_DSCR_CMD0_USBDEV_TX0 9 139 #define AU1550_DSCR_CMD0_USBDEV_TX1 10 140 #define AU1550_DSCR_CMD0_USBDEV_TX2 11 141 #define AU1550_DSCR_CMD0_USBDEV_RX3 12 142 #define AU1550_DSCR_CMD0_USBDEV_RX4 13 143 #define AU1550_DSCR_CMD0_PSC0_TX 14 144 #define AU1550_DSCR_CMD0_PSC0_RX 15 145 #define AU1550_DSCR_CMD0_PSC1_TX 16 146 #define AU1550_DSCR_CMD0_PSC1_RX 17 147 #define AU1550_DSCR_CMD0_PSC2_TX 18 148 #define AU1550_DSCR_CMD0_PSC2_RX 19 149 #define AU1550_DSCR_CMD0_PSC3_TX 20 150 #define AU1550_DSCR_CMD0_PSC3_RX 21 151 #define AU1550_DSCR_CMD0_PCI_WRITE 22 152 #define AU1550_DSCR_CMD0_NAND_FLASH 23 153 #define AU1550_DSCR_CMD0_MAC0_RX 24 154 #define AU1550_DSCR_CMD0_MAC0_TX 25 155 #define AU1550_DSCR_CMD0_MAC1_RX 26 156 #define AU1550_DSCR_CMD0_MAC1_TX 27 157 158 #define AU1200_DSCR_CMD0_UART0_TX 0 159 #define AU1200_DSCR_CMD0_UART0_RX 1 160 #define AU1200_DSCR_CMD0_UART1_TX 2 161 #define AU1200_DSCR_CMD0_UART1_RX 3 162 #define AU1200_DSCR_CMD0_DMA_REQ0 4 163 #define AU1200_DSCR_CMD0_DMA_REQ1 5 164 #define AU1200_DSCR_CMD0_MAE_BE 6 165 #define AU1200_DSCR_CMD0_MAE_FE 7 166 #define AU1200_DSCR_CMD0_SDMS_TX0 8 167 #define AU1200_DSCR_CMD0_SDMS_RX0 9 168 #define AU1200_DSCR_CMD0_SDMS_TX1 10 169 #define AU1200_DSCR_CMD0_SDMS_RX1 11 170 #define AU1200_DSCR_CMD0_AES_TX 13 171 #define AU1200_DSCR_CMD0_AES_RX 12 172 #define AU1200_DSCR_CMD0_PSC0_TX 14 173 #define AU1200_DSCR_CMD0_PSC0_RX 15 174 #define AU1200_DSCR_CMD0_PSC1_TX 16 175 #define AU1200_DSCR_CMD0_PSC1_RX 17 176 #define AU1200_DSCR_CMD0_CIM_RXA 18 177 #define AU1200_DSCR_CMD0_CIM_RXB 19 178 #define AU1200_DSCR_CMD0_CIM_RXC 20 179 #define AU1200_DSCR_CMD0_MAE_BOTH 21 180 #define AU1200_DSCR_CMD0_LCD 22 181 #define AU1200_DSCR_CMD0_NAND_FLASH 23 182 #define AU1200_DSCR_CMD0_PSC0_SYNC 24 183 #define AU1200_DSCR_CMD0_PSC1_SYNC 25 184 #define AU1200_DSCR_CMD0_CIM_SYNC 26 185 186 #define AU1300_DSCR_CMD0_UART0_TX 0 187 #define AU1300_DSCR_CMD0_UART0_RX 1 188 #define AU1300_DSCR_CMD0_UART1_TX 2 189 #define AU1300_DSCR_CMD0_UART1_RX 3 190 #define AU1300_DSCR_CMD0_UART2_TX 4 191 #define AU1300_DSCR_CMD0_UART2_RX 5 192 #define AU1300_DSCR_CMD0_UART3_TX 6 193 #define AU1300_DSCR_CMD0_UART3_RX 7 194 #define AU1300_DSCR_CMD0_SDMS_TX0 8 195 #define AU1300_DSCR_CMD0_SDMS_RX0 9 196 #define AU1300_DSCR_CMD0_SDMS_TX1 10 197 #define AU1300_DSCR_CMD0_SDMS_RX1 11 198 #define AU1300_DSCR_CMD0_AES_TX 12 199 #define AU1300_DSCR_CMD0_AES_RX 13 200 #define AU1300_DSCR_CMD0_PSC0_TX 14 201 #define AU1300_DSCR_CMD0_PSC0_RX 15 202 #define AU1300_DSCR_CMD0_PSC1_TX 16 203 #define AU1300_DSCR_CMD0_PSC1_RX 17 204 #define AU1300_DSCR_CMD0_PSC2_TX 18 205 #define AU1300_DSCR_CMD0_PSC2_RX 19 206 #define AU1300_DSCR_CMD0_PSC3_TX 20 207 #define AU1300_DSCR_CMD0_PSC3_RX 21 208 #define AU1300_DSCR_CMD0_LCD 22 209 #define AU1300_DSCR_CMD0_NAND_FLASH 23 210 #define AU1300_DSCR_CMD0_SDMS_TX2 24 211 #define AU1300_DSCR_CMD0_SDMS_RX2 25 212 #define AU1300_DSCR_CMD0_CIM_SYNC 26 213 #define AU1300_DSCR_CMD0_UDMA 27 214 #define AU1300_DSCR_CMD0_DMA_REQ0 28 215 #define AU1300_DSCR_CMD0_DMA_REQ1 29 216 217 #define DSCR_CMD0_THROTTLE 30 218 #define DSCR_CMD0_ALWAYS 31 219 #define DSCR_NDEV_IDS 32 220 /* This macro is used to find/create custom device types */ 221 #define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \ 222 ((d) & 0xFF)) 223 #define DSCR_CUSTOM2DEV_ID(x) ((x) & 0xFF) 224 225 #define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25) 226 #define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20) 227 228 /* Source/Destination transfer width. */ 229 #define DSCR_CMD0_BYTE 0 230 #define DSCR_CMD0_HALFWORD 1 231 #define DSCR_CMD0_WORD 2 232 233 #define DSCR_CMD0_SW(x) (((x) & 0x3) << 18) 234 #define DSCR_CMD0_DW(x) (((x) & 0x3) << 16) 235 236 /* DDMA Descriptor Type. */ 237 #define DSCR_CMD0_STANDARD 0 238 #define DSCR_CMD0_LITERAL 1 239 #define DSCR_CMD0_CMP_BRANCH 2 240 241 #define DSCR_CMD0_DT(x) (((x) & 0x3) << 13) 242 243 /* Status Instruction. */ 244 #define DSCR_CMD0_ST_NOCHANGE 0 /* Don't change */ 245 #define DSCR_CMD0_ST_CURRENT 1 /* Write current status */ 246 #define DSCR_CMD0_ST_CMD0 2 /* Write cmd0 with V cleared */ 247 #define DSCR_CMD0_ST_BYTECNT 3 /* Write remaining byte count */ 248 249 #define DSCR_CMD0_ST(x) (((x) & 0x3) << 0) 250 251 /* Descriptor Command 1. */ 252 #define DSCR_CMD1_SUPTR_MASK (0xf << 28) /* upper 4 bits of src addr */ 253 #define DSCR_CMD1_DUPTR_MASK (0xf << 24) /* upper 4 bits of dest addr */ 254 #define DSCR_CMD1_FL_MASK (0x3 << 22) /* Flag bits */ 255 #define DSCR_CMD1_BC_MASK (0x3fffff) /* Byte count */ 256 257 /* Flag description. */ 258 #define DSCR_CMD1_FL_MEM_STRIDE0 0 259 #define DSCR_CMD1_FL_MEM_STRIDE1 1 260 #define DSCR_CMD1_FL_MEM_STRIDE2 2 261 262 #define DSCR_CMD1_FL(x) (((x) & 0x3) << 22) 263 264 /* Source1, 1-dimensional stride. */ 265 #define DSCR_SRC1_STS_MASK (3 << 30) /* Src xfer size */ 266 #define DSCR_SRC1_SAM_MASK (3 << 28) /* Src xfer movement */ 267 #define DSCR_SRC1_SB_MASK (0x3fff << 14) /* Block size */ 268 #define DSCR_SRC1_SB(x) (((x) & 0x3fff) << 14) 269 #define DSCR_SRC1_SS_MASK (0x3fff << 0) /* Stride */ 270 #define DSCR_SRC1_SS(x) (((x) & 0x3fff) << 0) 271 272 /* Dest1, 1-dimensional stride. */ 273 #define DSCR_DEST1_DTS_MASK (3 << 30) /* Dest xfer size */ 274 #define DSCR_DEST1_DAM_MASK (3 << 28) /* Dest xfer movement */ 275 #define DSCR_DEST1_DB_MASK (0x3fff << 14) /* Block size */ 276 #define DSCR_DEST1_DB(x) (((x) & 0x3fff) << 14) 277 #define DSCR_DEST1_DS_MASK (0x3fff << 0) /* Stride */ 278 #define DSCR_DEST1_DS(x) (((x) & 0x3fff) << 0) 279 280 #define DSCR_xTS_SIZE1 0 281 #define DSCR_xTS_SIZE2 1 282 #define DSCR_xTS_SIZE4 2 283 #define DSCR_xTS_SIZE8 3 284 #define DSCR_SRC1_STS(x) (((x) & 3) << 30) 285 #define DSCR_DEST1_DTS(x) (((x) & 3) << 30) 286 287 #define DSCR_xAM_INCREMENT 0 288 #define DSCR_xAM_DECREMENT 1 289 #define DSCR_xAM_STATIC 2 290 #define DSCR_xAM_BURST 3 291 #define DSCR_SRC1_SAM(x) (((x) & 3) << 28) 292 #define DSCR_DEST1_DAM(x) (((x) & 3) << 28) 293 294 /* The next descriptor pointer. */ 295 #define DSCR_NXTPTR_MASK (0x07ffffff) 296 #define DSCR_NXTPTR(x) ((x) >> 5) 297 #define DSCR_GET_NXTPTR(x) ((x) << 5) 298 #define DSCR_NXTPTR_MS (1 << 27) 299 300 /* The number of DBDMA channels. */ 301 #define NUM_DBDMA_CHANS 16 302 303 /* 304 * DDMA API definitions 305 * FIXME: may not fit to this header file 306 */ 307 typedef struct dbdma_device_table { 308 u32 dev_id; 309 u32 dev_flags; 310 u32 dev_tsize; 311 u32 dev_devwidth; 312 u32 dev_physaddr; /* If FIFO */ 313 u32 dev_intlevel; 314 u32 dev_intpolarity; 315 } dbdev_tab_t; 316 317 318 typedef struct dbdma_chan_config { 319 spinlock_t lock; 320 321 u32 chan_flags; 322 u32 chan_index; 323 dbdev_tab_t *chan_src; 324 dbdev_tab_t *chan_dest; 325 au1x_dma_chan_t *chan_ptr; 326 au1x_ddma_desc_t *chan_desc_base; 327 u32 cdb_membase; /* kmalloc base of above */ 328 au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr; 329 void *chan_callparam; 330 void (*chan_callback)(int, void *); 331 } chan_tab_t; 332 333 #define DEV_FLAGS_INUSE (1 << 0) 334 #define DEV_FLAGS_ANYUSE (1 << 1) 335 #define DEV_FLAGS_OUT (1 << 2) 336 #define DEV_FLAGS_IN (1 << 3) 337 #define DEV_FLAGS_BURSTABLE (1 << 4) 338 #define DEV_FLAGS_SYNC (1 << 5) 339 /* end DDMA API definitions */ 340 341 /* 342 * External functions for drivers to use. 343 * Use this to allocate a DBDMA channel. The device IDs are one of 344 * the DSCR_CMD0 devices IDs, which is usually redefined to a more 345 * meaningful name. The 'callback' is called during DMA completion 346 * interrupt. 347 */ 348 extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, 349 void (*callback)(int, void *), 350 void *callparam); 351 352 #define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS 353 354 /* Set the device width of an in/out FIFO. */ 355 u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits); 356 357 /* Allocate a ring of descriptors for DBDMA. */ 358 u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries); 359 360 /* Put buffers on source/destination descriptors. */ 361 u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags); 362 u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags); 363 364 /* Get a buffer from the destination descriptor. */ 365 u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes); 366 367 void au1xxx_dbdma_stop(u32 chanid); 368 void au1xxx_dbdma_start(u32 chanid); 369 void au1xxx_dbdma_reset(u32 chanid); 370 u32 au1xxx_get_dma_residue(u32 chanid); 371 372 void au1xxx_dbdma_chan_free(u32 chanid); 373 void au1xxx_dbdma_dump(u32 chanid); 374 375 u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr); 376 377 u32 au1xxx_ddma_add_device(dbdev_tab_t *dev); 378 extern void au1xxx_ddma_del_device(u32 devid); 379 void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp); 380 381 /* 382 * Flags for the put_source/put_dest functions. 383 */ 384 #define DDMA_FLAGS_IE (1 << 0) 385 #define DDMA_FLAGS_NOIE (1 << 1) 386 387 #endif /* _LANGUAGE_ASSEMBLY */ 388 #endif /* _AU1000_DBDMA_H_ */ 389