1 /* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Copyright (C) 2003, 04, 07 Ralf Baechle <ralf@linux-mips.org> 7 * Copyright (C) MIPS Technologies, Inc. 8 * written by Ralf Baechle <ralf@linux-mips.org> 9 */ 10 #ifndef _ASM_HAZARDS_H 11 #define _ASM_HAZARDS_H 12 13 #include <linux/stringify.h> 14 #include <asm/compiler.h> 15 16 #define ___ssnop \ 17 sll $0, $0, 1 18 19 #define ___ehb \ 20 sll $0, $0, 3 21 22 /* 23 * TLB hazards 24 */ 25 #if (defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \ 26 defined(CONFIG_CPU_MIPSR6)) && \ 27 !defined(CONFIG_CPU_CAVIUM_OCTEON) && !defined(CONFIG_CPU_LOONGSON64) 28 29 /* 30 * MIPSR2 defines ehb for hazard avoidance 31 */ 32 33 #define __mtc0_tlbw_hazard \ 34 ___ehb 35 36 #define __mtc0_tlbr_hazard \ 37 ___ehb 38 39 #define __tlbw_use_hazard \ 40 ___ehb 41 42 #define __tlb_read_hazard \ 43 ___ehb 44 45 #define __tlb_probe_hazard \ 46 ___ehb 47 48 #define __irq_enable_hazard \ 49 ___ehb 50 51 #define __irq_disable_hazard \ 52 ___ehb 53 54 #define __back_to_back_c0_hazard \ 55 ___ehb 56 57 /* 58 * gcc has a tradition of misscompiling the previous construct using the 59 * address of a label as argument to inline assembler. Gas otoh has the 60 * annoying difference between la and dla which are only usable for 32-bit 61 * rsp. 64-bit code, so can't be used without conditional compilation. 62 * The alternative is switching the assembler to 64-bit code which happens 63 * to work right even for 32-bit code... 64 */ 65 #define instruction_hazard() \ 66 do { \ 67 unsigned long tmp; \ 68 \ 69 __asm__ __volatile__( \ 70 " .set push \n" \ 71 " .set "MIPS_ISA_LEVEL" \n" \ 72 " dla %0, 1f \n" \ 73 " jr.hb %0 \n" \ 74 " .set pop \n" \ 75 "1: \n" \ 76 : "=r" (tmp)); \ 77 } while (0) 78 79 #elif (defined(CONFIG_CPU_MIPSR1) && !defined(CONFIG_MIPS_ALCHEMY)) || \ 80 defined(CONFIG_CPU_BMIPS) 81 82 /* 83 * These are slightly complicated by the fact that we guarantee R1 kernels to 84 * run fine on R2 processors. 85 */ 86 87 #define __mtc0_tlbw_hazard \ 88 ___ssnop; \ 89 ___ssnop; \ 90 ___ehb 91 92 #define __mtc0_tlbr_hazard \ 93 ___ssnop; \ 94 ___ssnop; \ 95 ___ehb 96 97 #define __tlbw_use_hazard \ 98 ___ssnop; \ 99 ___ssnop; \ 100 ___ssnop; \ 101 ___ehb 102 103 #define __tlb_read_hazard \ 104 ___ssnop; \ 105 ___ssnop; \ 106 ___ssnop; \ 107 ___ehb 108 109 #define __tlb_probe_hazard \ 110 ___ssnop; \ 111 ___ssnop; \ 112 ___ssnop; \ 113 ___ehb 114 115 #define __irq_enable_hazard \ 116 ___ssnop; \ 117 ___ssnop; \ 118 ___ssnop; \ 119 ___ehb 120 121 #define __irq_disable_hazard \ 122 ___ssnop; \ 123 ___ssnop; \ 124 ___ssnop; \ 125 ___ehb 126 127 #define __back_to_back_c0_hazard \ 128 ___ssnop; \ 129 ___ssnop; \ 130 ___ssnop; \ 131 ___ehb 132 133 /* 134 * gcc has a tradition of misscompiling the previous construct using the 135 * address of a label as argument to inline assembler. Gas otoh has the 136 * annoying difference between la and dla which are only usable for 32-bit 137 * rsp. 64-bit code, so can't be used without conditional compilation. 138 * The alternative is switching the assembler to 64-bit code which happens 139 * to work right even for 32-bit code... 140 */ 141 #define __instruction_hazard() \ 142 do { \ 143 unsigned long tmp; \ 144 \ 145 __asm__ __volatile__( \ 146 " .set push \n" \ 147 " .set mips64r2 \n" \ 148 " dla %0, 1f \n" \ 149 " jr.hb %0 \n" \ 150 " .set pop \n" \ 151 "1: \n" \ 152 : "=r" (tmp)); \ 153 } while (0) 154 155 #define instruction_hazard() \ 156 do { \ 157 if (cpu_has_mips_r2_r6) \ 158 __instruction_hazard(); \ 159 } while (0) 160 161 #elif defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \ 162 defined(CONFIG_CPU_LOONGSON2EF) || defined(CONFIG_CPU_LOONGSON64) || \ 163 defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_R5500) 164 165 /* 166 * R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer. 167 */ 168 169 #define __mtc0_tlbw_hazard 170 171 #define __mtc0_tlbr_hazard 172 173 #define __tlbw_use_hazard 174 175 #define __tlb_read_hazard 176 177 #define __tlb_probe_hazard 178 179 #define __irq_enable_hazard 180 181 #define __irq_disable_hazard 182 183 #define __back_to_back_c0_hazard 184 185 #define instruction_hazard() do { } while (0) 186 187 #elif defined(CONFIG_CPU_SB1) 188 189 /* 190 * Mostly like R4000 for historic reasons 191 */ 192 #define __mtc0_tlbw_hazard 193 194 #define __mtc0_tlbr_hazard 195 196 #define __tlbw_use_hazard 197 198 #define __tlb_read_hazard 199 200 #define __tlb_probe_hazard 201 202 #define __irq_enable_hazard 203 204 #define __irq_disable_hazard \ 205 ___ssnop; \ 206 ___ssnop; \ 207 ___ssnop 208 209 #define __back_to_back_c0_hazard 210 211 #define instruction_hazard() do { } while (0) 212 213 #else 214 215 /* 216 * Finally the catchall case for all other processors including R4000, R4400, 217 * R4600, R4700, R5000, RM7000, NEC VR41xx etc. 218 * 219 * The taken branch will result in a two cycle penalty for the two killed 220 * instructions on R4000 / R4400. Other processors only have a single cycle 221 * hazard so this is nice trick to have an optimal code for a range of 222 * processors. 223 */ 224 #define __mtc0_tlbw_hazard \ 225 nop; \ 226 nop 227 228 #define __mtc0_tlbr_hazard \ 229 nop; \ 230 nop 231 232 #define __tlbw_use_hazard \ 233 nop; \ 234 nop; \ 235 nop 236 237 #define __tlb_read_hazard \ 238 nop; \ 239 nop; \ 240 nop 241 242 #define __tlb_probe_hazard \ 243 nop; \ 244 nop; \ 245 nop 246 247 #define __irq_enable_hazard \ 248 ___ssnop; \ 249 ___ssnop; \ 250 ___ssnop 251 252 #define __irq_disable_hazard \ 253 nop; \ 254 nop; \ 255 nop 256 257 #define __back_to_back_c0_hazard \ 258 ___ssnop; \ 259 ___ssnop; \ 260 ___ssnop 261 262 #define instruction_hazard() do { } while (0) 263 264 #endif 265 266 267 /* FPU hazards */ 268 269 #if defined(CONFIG_CPU_SB1) 270 271 #define __enable_fpu_hazard \ 272 .set push; \ 273 .set mips64; \ 274 .set noreorder; \ 275 ___ssnop; \ 276 bnezl $0, .+4; \ 277 ___ssnop; \ 278 .set pop 279 280 #define __disable_fpu_hazard 281 282 #elif defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_CPU_MIPSR5) || \ 283 defined(CONFIG_CPU_MIPSR6) 284 285 #define __enable_fpu_hazard \ 286 ___ehb 287 288 #define __disable_fpu_hazard \ 289 ___ehb 290 291 #else 292 293 #define __enable_fpu_hazard \ 294 nop; \ 295 nop; \ 296 nop; \ 297 nop 298 299 #define __disable_fpu_hazard \ 300 ___ehb 301 302 #endif 303 304 #ifdef __ASSEMBLY__ 305 306 #define _ssnop ___ssnop 307 #define _ehb ___ehb 308 #define mtc0_tlbw_hazard __mtc0_tlbw_hazard 309 #define mtc0_tlbr_hazard __mtc0_tlbr_hazard 310 #define tlbw_use_hazard __tlbw_use_hazard 311 #define tlb_read_hazard __tlb_read_hazard 312 #define tlb_probe_hazard __tlb_probe_hazard 313 #define irq_enable_hazard __irq_enable_hazard 314 #define irq_disable_hazard __irq_disable_hazard 315 #define back_to_back_c0_hazard __back_to_back_c0_hazard 316 #define enable_fpu_hazard __enable_fpu_hazard 317 #define disable_fpu_hazard __disable_fpu_hazard 318 319 #else 320 321 #define _ssnop() \ 322 do { \ 323 __asm__ __volatile__( \ 324 __stringify(___ssnop) \ 325 ); \ 326 } while (0) 327 328 #define _ehb() \ 329 do { \ 330 __asm__ __volatile__( \ 331 __stringify(___ehb) \ 332 ); \ 333 } while (0) 334 335 336 #define mtc0_tlbw_hazard() \ 337 do { \ 338 __asm__ __volatile__( \ 339 __stringify(__mtc0_tlbw_hazard) \ 340 ); \ 341 } while (0) 342 343 344 #define mtc0_tlbr_hazard() \ 345 do { \ 346 __asm__ __volatile__( \ 347 __stringify(__mtc0_tlbr_hazard) \ 348 ); \ 349 } while (0) 350 351 352 #define tlbw_use_hazard() \ 353 do { \ 354 __asm__ __volatile__( \ 355 __stringify(__tlbw_use_hazard) \ 356 ); \ 357 } while (0) 358 359 360 #define tlb_read_hazard() \ 361 do { \ 362 __asm__ __volatile__( \ 363 __stringify(__tlb_read_hazard) \ 364 ); \ 365 } while (0) 366 367 368 #define tlb_probe_hazard() \ 369 do { \ 370 __asm__ __volatile__( \ 371 __stringify(__tlb_probe_hazard) \ 372 ); \ 373 } while (0) 374 375 376 #define irq_enable_hazard() \ 377 do { \ 378 __asm__ __volatile__( \ 379 __stringify(__irq_enable_hazard) \ 380 ); \ 381 } while (0) 382 383 384 #define irq_disable_hazard() \ 385 do { \ 386 __asm__ __volatile__( \ 387 __stringify(__irq_disable_hazard) \ 388 ); \ 389 } while (0) 390 391 392 #define back_to_back_c0_hazard() \ 393 do { \ 394 __asm__ __volatile__( \ 395 __stringify(__back_to_back_c0_hazard) \ 396 ); \ 397 } while (0) 398 399 400 #define enable_fpu_hazard() \ 401 do { \ 402 __asm__ __volatile__( \ 403 __stringify(__enable_fpu_hazard) \ 404 ); \ 405 } while (0) 406 407 408 #define disable_fpu_hazard() \ 409 do { \ 410 __asm__ __volatile__( \ 411 __stringify(__disable_fpu_hazard) \ 412 ); \ 413 } while (0) 414 415 /* 416 * MIPS R2 instruction hazard barrier. Needs to be called as a subroutine. 417 */ 418 extern void mips_ihb(void); 419 420 #endif /* __ASSEMBLY__ */ 421 422 #endif /* _ASM_HAZARDS_H */ 423