1 /* 2 * Hardware info about DECstation 5000/200 systems (otherwise known as 3 * 3max or KN02). 4 * 5 * This file is subject to the terms and conditions of the GNU General Public 6 * License. See the file "COPYING" in the main directory of this archive 7 * for more details. 8 * 9 * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions 10 * are by courtesy of Chris Fraser. 11 * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki 12 */ 13 #ifndef __ASM_MIPS_DEC_KN02_H 14 #define __ASM_MIPS_DEC_KN02_H 15 16 #define KN02_SLOT_BASE 0x1fc00000 17 #define KN02_SLOT_SIZE 0x00080000 18 19 /* 20 * Address ranges decoded by the "system slot" logic for onboard devices. 21 */ 22 #define KN02_SYS_ROM (0*KN02_SLOT_SIZE) /* system board ROM */ 23 #define KN02_RES_1 (1*KN02_SLOT_SIZE) /* unused */ 24 #define KN02_CHKSYN (2*KN02_SLOT_SIZE) /* ECC syndrome */ 25 #define KN02_ERRADDR (3*KN02_SLOT_SIZE) /* bus error address */ 26 #define KN02_DZ11 (4*KN02_SLOT_SIZE) /* DZ11 (DC7085) serial */ 27 #define KN02_RTC (5*KN02_SLOT_SIZE) /* DS1287 RTC */ 28 #define KN02_CSR (6*KN02_SLOT_SIZE) /* system ctrl & status reg */ 29 #define KN02_SYS_ROM_7 (7*KN02_SLOT_SIZE) /* system board ROM (alias) */ 30 31 32 /* 33 * System Control & Status Register bits. 34 */ 35 #define KN02_CSR_RES_28 (0xf<<28) /* unused */ 36 #define KN02_CSR_PSU (1<<27) /* power supply unit warning */ 37 #define KN02_CSR_NVRAM (1<<26) /* ~NVRAM clear jumper */ 38 #define KN02_CSR_REFEVEN (1<<25) /* mem refresh bank toggle */ 39 #define KN02_CSR_NRMOD (1<<24) /* ~NRMOD manufact. jumper */ 40 #define KN02_CSR_IOINTEN (0xff<<16) /* IRQ mask bits */ 41 #define KN02_CSR_DIAGCHK (1<<15) /* diagn/norml ECC reads */ 42 #define KN02_CSR_DIAGGEN (1<<14) /* diagn/norml ECC writes */ 43 #define KN02_CSR_CORRECT (1<<13) /* ECC correct/check */ 44 #define KN02_CSR_LEDIAG (1<<12) /* ECC diagn. latch strobe */ 45 #define KN02_CSR_TXDIS (1<<11) /* DZ11 transmit disable */ 46 #define KN02_CSR_BNK32M (1<<10) /* 32M/8M stride */ 47 #define KN02_CSR_DIAGDN (1<<9) /* DIAGDN manufact. jumper */ 48 #define KN02_CSR_BAUD38 (1<<8) /* DZ11 38/19kbps ext. rate */ 49 #define KN02_CSR_IOINT (0xff<<0) /* IRQ status bits (r/o) */ 50 #define KN02_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */ 51 52 53 /* 54 * CPU interrupt bits. 55 */ 56 #define KN02_CPU_INR_RES_6 6 /* unused */ 57 #define KN02_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */ 58 #define KN02_CPU_INR_RES_4 4 /* unused */ 59 #define KN02_CPU_INR_RTC 3 /* DS1287 RTC */ 60 #define KN02_CPU_INR_CASCADE 2 /* CSR cascade */ 61 62 /* 63 * CSR interrupt bits. 64 */ 65 #define KN02_CSR_INR_DZ11 7 /* DZ11 (DC7085) serial */ 66 #define KN02_CSR_INR_LANCE 6 /* LANCE (Am7990) Ethernet */ 67 #define KN02_CSR_INR_ASC 5 /* ASC (NCR53C94) SCSI */ 68 #define KN02_CSR_INR_RES_4 4 /* unused */ 69 #define KN02_CSR_INR_RES_3 3 /* unused */ 70 #define KN02_CSR_INR_TC2 2 /* TURBOchannel slot #2 */ 71 #define KN02_CSR_INR_TC1 1 /* TURBOchannel slot #1 */ 72 #define KN02_CSR_INR_TC0 0 /* TURBOchannel slot #0 */ 73 74 75 #define KN02_IRQ_BASE 8 /* first IRQ assigned to CSR */ 76 #define KN02_IRQ_LINES 8 /* number of CSR interrupts */ 77 78 #define KN02_IRQ_NR(n) ((n) + KN02_IRQ_BASE) 79 #define KN02_IRQ_MASK(n) (1 << (n)) 80 #define KN02_IRQ_ALL 0xff 81 82 83 #ifndef __ASSEMBLY__ 84 85 #include <linux/types.h> 86 87 extern u32 cached_kn02_csr; 88 extern void init_kn02_irqs(int base); 89 #endif 90 91 #endif /* __ASM_MIPS_DEC_KN02_H */ 92