1# SPDX-License-Identifier: GPL-2.0 2if MIPS_GENERIC_KERNEL 3 4config LEGACY_BOARDS 5 bool 6 help 7 Select this from your board if the board must use a legacy, non-UHI, 8 boot protocol. This will cause the kernel to scan through the list of 9 supported machines calling their detect functions in turn if the 10 kernel is booted without being provided with an FDT via the UHI 11 boot protocol. 12 13config YAMON_DT_SHIM 14 bool 15 help 16 Select this from your board if the board uses the YAMON bootloader 17 and you wish to include code which helps translate various 18 YAMON-provided environment variables into a device tree properties. 19 20comment "Legacy (non-UHI/non-FIT) Boards" 21 22config LEGACY_BOARD_SEAD3 23 bool "Support MIPS SEAD-3 boards" 24 select LEGACY_BOARDS 25 select YAMON_DT_SHIM 26 help 27 Enable this to include support for booting on MIPS SEAD-3 FPGA-based 28 development boards, which boot using a legacy boot protocol. 29 30comment "MSCC Ocelot doesn't work with SEAD3 enabled" 31 depends on LEGACY_BOARD_SEAD3 32 33config LEGACY_BOARD_OCELOT 34 bool "Legacy support for Ocelot based boards" 35 depends on LEGACY_BOARD_SEAD3=n 36 select LEGACY_BOARDS 37 select SOC_VCOREIII 38 select SYS_HAS_EARLY_PRINTK 39 select USE_GENERIC_EARLY_PRINTK_8250 40 41config SOC_VCOREIII 42 bool 43 select GPIOLIB 44 select MSCC_OCELOT_IRQ 45 select MSCC_OCELOT #will be removed when driver no more use it 46 47#Will be removed when the driver using it will be converted to SOC_VCOREIII 48config MSCC_OCELOT 49 bool 50 51comment "FIT/UHI Boards" 52 53config FIT_IMAGE_FDT_BOSTON 54 bool "Include FDT for MIPS Boston boards" 55 help 56 Enable this to include the FDT for the MIPS Boston development board 57 from Imagination Technologies in the FIT kernel image. You should 58 enable this if you wish to boot on a MIPS Boston board, as it is 59 expected by the bootloader. 60 61config FIT_IMAGE_FDT_NI169445 62 bool "Include FDT for NI 169445" 63 help 64 Enable this to include the FDT for the 169445 platform from 65 National Instruments in the FIT kernel image. 66 67config FIT_IMAGE_FDT_XILFPGA 68 bool "Include FDT for Xilfpga" 69 help 70 Enable this to include the FDT for the MIPSfpga platform 71 from Imagination Technologies in the FIT kernel image. 72 73config FIT_IMAGE_FDT_OCELOT 74 bool "Include FDT for Microsemi Ocelot development platforms" 75 select SOC_VCOREIII 76 help 77 Enable this to include the FDT for the Ocelot development platforms 78 from Microsemi in the FIT kernel image. 79 This requires u-boot on the platform. 80 81config FIT_IMAGE_FDT_LUTON 82 bool "Include FDT for Microsemi Luton development platforms" 83 select SOC_VCOREIII 84 help 85 Enable this to include the FDT for the Luton development platforms 86 from Microsemi in the FIT kernel image. 87 This requires u-boot on the platform. 88 89config FIT_IMAGE_FDT_JAGUAR2 90 bool "Include FDT for Microsemi Jaguar2 development platforms" 91 select SOC_VCOREIII 92 help 93 Enable this to include the FDT for the Jaguar2 development platforms 94 from Microsemi in the FIT kernel image. 95 This requires u-boot on the platform. 96 97config FIT_IMAGE_FDT_SERVAL 98 bool "Include FDT for Microsemi Serval development platforms" 99 select SOC_VCOREIII 100 help 101 Enable this to include the FDT for the Serval development platforms 102 from Microsemi in the FIT kernel image. 103 This requires u-boot on the platform. 104 105config BOARD_INGENIC 106 bool "Support boards based on Ingenic SoCs" 107 select MACH_INGENIC_GENERIC 108 help 109 Enable support for boards based on Ingenic SoCs. 110 111config VIRT_BOARD_RANCHU 112 bool "Support Ranchu platform for Android emulator" 113 help 114 This enables support for the platform used by Android emulator. 115 116 Ranchu platform consists of a set of virtual devices. This platform 117 enables emulation of variety of virtual configurations while using 118 Android emulator. Android emulator is based on Qemu, and contains 119 the support for the same set of virtual devices. 120 121endif 122