1# SPDX-License-Identifier: GPL-2.0 2if MIPS_GENERIC 3 4config LEGACY_BOARDS 5 bool 6 help 7 Select this from your board if the board must use a legacy, non-UHI, 8 boot protocol. This will cause the kernel to scan through the list of 9 supported machines calling their detect functions in turn if the 10 kernel is booted without being provided with an FDT via the UHI 11 boot protocol. 12 13config YAMON_DT_SHIM 14 bool 15 help 16 Select this from your board if the board uses the YAMON bootloader 17 and you wish to include code which helps translate various 18 YAMON-provided environment variables into a device tree properties. 19 20comment "Legacy (non-UHI/non-FIT) Boards" 21 22config LEGACY_BOARD_SEAD3 23 bool "Support MIPS SEAD-3 boards" 24 select LEGACY_BOARDS 25 select YAMON_DT_SHIM 26 help 27 Enable this to include support for booting on MIPS SEAD-3 FPGA-based 28 development boards, which boot using a legacy boot protocol. 29 30comment "MSCC Ocelot doesn't work with SEAD3 enabled" 31 depends on LEGACY_BOARD_SEAD3 32 33config LEGACY_BOARD_OCELOT 34 bool "Support MSCC Ocelot boards" 35 depends on LEGACY_BOARD_SEAD3=n 36 select LEGACY_BOARDS 37 select MSCC_OCELOT 38 select SYS_HAS_EARLY_PRINTK 39 select USE_GENERIC_EARLY_PRINTK_8250 40 41config MSCC_OCELOT 42 bool 43 select GPIOLIB 44 select MSCC_OCELOT_IRQ 45 46comment "FIT/UHI Boards" 47 48config FIT_IMAGE_FDT_BOSTON 49 bool "Include FDT for MIPS Boston boards" 50 help 51 Enable this to include the FDT for the MIPS Boston development board 52 from Imagination Technologies in the FIT kernel image. You should 53 enable this if you wish to boot on a MIPS Boston board, as it is 54 expected by the bootloader. 55 56config FIT_IMAGE_FDT_NI169445 57 bool "Include FDT for NI 169445" 58 help 59 Enable this to include the FDT for the 169445 platform from 60 National Instruments in the FIT kernel image. 61 62config FIT_IMAGE_FDT_XILFPGA 63 bool "Include FDT for Xilfpga" 64 help 65 Enable this to include the FDT for the MIPSfpga platform 66 from Imagination Technologies in the FIT kernel image. 67 68config FIT_IMAGE_FDT_OCELOT_PCB123 69 bool "Include FDT for Microsemi Ocelot PCB123" 70 select MSCC_OCELOT 71 help 72 Enable this to include the FDT for the Ocelot PCB123 platform 73 from Microsemi in the FIT kernel image. 74 This requires u-boot on the platform. 75 76config VIRT_BOARD_RANCHU 77 bool "Support Ranchu platform for Android emulator" 78 help 79 This enables support for the platform used by Android emulator. 80 81 Ranchu platform consists of a set of virtual devices. This platform 82 enables emulation of variety of virtual configurations while using 83 Android emulator. Android emulator is based on Qemu, and contains 84 the support for the same set of virtual devices. 85 86endif 87