1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * DEC I/O ASIC interrupts. 4 * 5 * Copyright (c) 2002, 2003, 2013 Maciej W. Rozycki 6 */ 7 8 #include <linux/init.h> 9 #include <linux/irq.h> 10 #include <linux/types.h> 11 12 #include <asm/dec/ioasic.h> 13 #include <asm/dec/ioasic_addrs.h> 14 #include <asm/dec/ioasic_ints.h> 15 16 static int ioasic_irq_base; 17 18 static void unmask_ioasic_irq(struct irq_data *d) 19 { 20 u32 simr; 21 22 simr = ioasic_read(IO_REG_SIMR); 23 simr |= (1 << (d->irq - ioasic_irq_base)); 24 ioasic_write(IO_REG_SIMR, simr); 25 } 26 27 static void mask_ioasic_irq(struct irq_data *d) 28 { 29 u32 simr; 30 31 simr = ioasic_read(IO_REG_SIMR); 32 simr &= ~(1 << (d->irq - ioasic_irq_base)); 33 ioasic_write(IO_REG_SIMR, simr); 34 } 35 36 static void ack_ioasic_irq(struct irq_data *d) 37 { 38 mask_ioasic_irq(d); 39 fast_iob(); 40 } 41 42 static struct irq_chip ioasic_irq_type = { 43 .name = "IO-ASIC", 44 .irq_ack = ack_ioasic_irq, 45 .irq_mask = mask_ioasic_irq, 46 .irq_mask_ack = ack_ioasic_irq, 47 .irq_unmask = unmask_ioasic_irq, 48 }; 49 50 static void clear_ioasic_dma_irq(struct irq_data *d) 51 { 52 u32 sir; 53 54 sir = ~(1 << (d->irq - ioasic_irq_base)); 55 ioasic_write(IO_REG_SIR, sir); 56 fast_iob(); 57 } 58 59 static struct irq_chip ioasic_dma_irq_type = { 60 .name = "IO-ASIC-DMA", 61 .irq_ack = clear_ioasic_dma_irq, 62 .irq_mask = mask_ioasic_irq, 63 .irq_unmask = unmask_ioasic_irq, 64 .irq_eoi = clear_ioasic_dma_irq, 65 }; 66 67 /* 68 * I/O ASIC implements two kinds of DMA interrupts, informational and 69 * error interrupts. 70 * 71 * The former do not stop DMA and should be cleared as soon as possible 72 * so that if they retrigger before the handler has completed, usually as 73 * a side effect of actions taken by the handler, then they are reissued. 74 * These use the `handle_edge_irq' handler that clears the request right 75 * away. 76 * 77 * The latter stop DMA and do not resume it until the interrupt has been 78 * cleared. This cannot be done until after a corrective action has been 79 * taken and this also means they will not retrigger. Therefore they use 80 * the `handle_fasteoi_irq' handler that only clears the request on the 81 * way out. Because MIPS processor interrupt inputs, one of which the I/O 82 * ASIC is cascaded to, are level-triggered it is recommended that error 83 * DMA interrupt action handlers are registered with the IRQF_ONESHOT flag 84 * set so that they are run with the interrupt line masked. 85 * 86 * This mask has `1' bits in the positions of informational interrupts. 87 */ 88 #define IO_IRQ_DMA_INFO \ 89 (IO_IRQ_MASK(IO_INR_SCC0A_RXDMA) | \ 90 IO_IRQ_MASK(IO_INR_SCC1A_RXDMA) | \ 91 IO_IRQ_MASK(IO_INR_ISDN_TXDMA) | \ 92 IO_IRQ_MASK(IO_INR_ISDN_RXDMA) | \ 93 IO_IRQ_MASK(IO_INR_ASC_DMA)) 94 95 void __init init_ioasic_irqs(int base) 96 { 97 int i; 98 99 /* Mask interrupts. */ 100 ioasic_write(IO_REG_SIMR, 0); 101 fast_iob(); 102 103 for (i = base; i < base + IO_INR_DMA; i++) 104 irq_set_chip_and_handler(i, &ioasic_irq_type, 105 handle_level_irq); 106 for (; i < base + IO_IRQ_LINES; i++) 107 irq_set_chip_and_handler(i, &ioasic_dma_irq_type, 108 1 << (i - base) & IO_IRQ_DMA_INFO ? 109 handle_edge_irq : handle_fasteoi_irq); 110 111 ioasic_irq_base = base; 112 } 113