1 /***********************license start*************** 2 * Author: Cavium Networks 3 * 4 * Contact: support@caviumnetworks.com 5 * This file is part of the OCTEON SDK 6 * 7 * Copyright (c) 2003-2008 Cavium Networks 8 * 9 * This file is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License, Version 2, as 11 * published by the Free Software Foundation. 12 * 13 * This file is distributed in the hope that it will be useful, but 14 * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty 15 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or 16 * NONINFRINGEMENT. See the GNU General Public License for more 17 * details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this file; if not, write to the Free Software 21 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA 22 * or visit http://www.gnu.org/licenses/. 23 * 24 * This file may also be available under a different license from Cavium. 25 * Contact Cavium Networks for more information 26 ***********************license end**************************************/ 27 28 /* 29 * Support library for the hardware Packet Output unit. 30 */ 31 32 #include <asm/octeon/octeon.h> 33 34 #include <asm/octeon/cvmx-config.h> 35 #include <asm/octeon/cvmx-pko.h> 36 #include <asm/octeon/cvmx-helper.h> 37 38 /** 39 * Internal state of packet output 40 */ 41 42 /** 43 * Call before any other calls to initialize the packet 44 * output system. This does chip global config, and should only be 45 * done by one core. 46 */ 47 48 void cvmx_pko_initialize_global(void) 49 { 50 int i; 51 uint64_t priority = 8; 52 union cvmx_pko_reg_cmd_buf config; 53 54 /* 55 * Set the size of the PKO command buffers to an odd number of 56 * 64bit words. This allows the normal two word send to stay 57 * aligned and never span a comamnd word buffer. 58 */ 59 config.u64 = 0; 60 config.s.pool = CVMX_FPA_OUTPUT_BUFFER_POOL; 61 config.s.size = CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE / 8 - 1; 62 63 cvmx_write_csr(CVMX_PKO_REG_CMD_BUF, config.u64); 64 65 for (i = 0; i < CVMX_PKO_MAX_OUTPUT_QUEUES; i++) 66 cvmx_pko_config_port(CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID, i, 1, 67 &priority); 68 69 /* 70 * If we aren't using all of the queues optimize PKO's 71 * internal memory. 72 */ 73 if (OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX) 74 || OCTEON_IS_MODEL(OCTEON_CN56XX) 75 || OCTEON_IS_MODEL(OCTEON_CN52XX)) { 76 int num_interfaces = cvmx_helper_get_number_of_interfaces(); 77 int last_port = 78 cvmx_helper_get_last_ipd_port(num_interfaces - 1); 79 int max_queues = 80 cvmx_pko_get_base_queue(last_port) + 81 cvmx_pko_get_num_queues(last_port); 82 if (OCTEON_IS_MODEL(OCTEON_CN38XX)) { 83 if (max_queues <= 32) 84 cvmx_write_csr(CVMX_PKO_REG_QUEUE_MODE, 2); 85 else if (max_queues <= 64) 86 cvmx_write_csr(CVMX_PKO_REG_QUEUE_MODE, 1); 87 } else { 88 if (max_queues <= 64) 89 cvmx_write_csr(CVMX_PKO_REG_QUEUE_MODE, 2); 90 else if (max_queues <= 128) 91 cvmx_write_csr(CVMX_PKO_REG_QUEUE_MODE, 1); 92 } 93 } 94 } 95 96 /** 97 * This function does per-core initialization required by the PKO routines. 98 * This must be called on all cores that will do packet output, and must 99 * be called after the FPA has been initialized and filled with pages. 100 * 101 * Returns 0 on success 102 * !0 on failure 103 */ 104 int cvmx_pko_initialize_local(void) 105 { 106 /* Nothing to do */ 107 return 0; 108 } 109 110 /** 111 * Enables the packet output hardware. It must already be 112 * configured. 113 */ 114 void cvmx_pko_enable(void) 115 { 116 union cvmx_pko_reg_flags flags; 117 118 flags.u64 = cvmx_read_csr(CVMX_PKO_REG_FLAGS); 119 if (flags.s.ena_pko) 120 cvmx_dprintf 121 ("Warning: Enabling PKO when PKO already enabled.\n"); 122 123 flags.s.ena_dwb = 1; 124 flags.s.ena_pko = 1; 125 /* 126 * always enable big endian for 3-word command. Does nothing 127 * for 2-word. 128 */ 129 flags.s.store_be = 1; 130 cvmx_write_csr(CVMX_PKO_REG_FLAGS, flags.u64); 131 } 132 133 /** 134 * Disables the packet output. Does not affect any configuration. 135 */ 136 void cvmx_pko_disable(void) 137 { 138 union cvmx_pko_reg_flags pko_reg_flags; 139 pko_reg_flags.u64 = cvmx_read_csr(CVMX_PKO_REG_FLAGS); 140 pko_reg_flags.s.ena_pko = 0; 141 cvmx_write_csr(CVMX_PKO_REG_FLAGS, pko_reg_flags.u64); 142 } 143 EXPORT_SYMBOL_GPL(cvmx_pko_disable); 144 145 /** 146 * Reset the packet output. 147 */ 148 static void __cvmx_pko_reset(void) 149 { 150 union cvmx_pko_reg_flags pko_reg_flags; 151 pko_reg_flags.u64 = cvmx_read_csr(CVMX_PKO_REG_FLAGS); 152 pko_reg_flags.s.reset = 1; 153 cvmx_write_csr(CVMX_PKO_REG_FLAGS, pko_reg_flags.u64); 154 } 155 156 /** 157 * Shutdown and free resources required by packet output. 158 */ 159 void cvmx_pko_shutdown(void) 160 { 161 union cvmx_pko_mem_queue_ptrs config; 162 int queue; 163 164 cvmx_pko_disable(); 165 166 for (queue = 0; queue < CVMX_PKO_MAX_OUTPUT_QUEUES; queue++) { 167 config.u64 = 0; 168 config.s.tail = 1; 169 config.s.index = 0; 170 config.s.port = CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID; 171 config.s.queue = queue & 0x7f; 172 config.s.qos_mask = 0; 173 config.s.buf_ptr = 0; 174 if (!OCTEON_IS_MODEL(OCTEON_CN3XXX)) { 175 union cvmx_pko_reg_queue_ptrs1 config1; 176 config1.u64 = 0; 177 config1.s.qid7 = queue >> 7; 178 cvmx_write_csr(CVMX_PKO_REG_QUEUE_PTRS1, config1.u64); 179 } 180 cvmx_write_csr(CVMX_PKO_MEM_QUEUE_PTRS, config.u64); 181 cvmx_cmd_queue_shutdown(CVMX_CMD_QUEUE_PKO(queue)); 182 } 183 __cvmx_pko_reset(); 184 } 185 EXPORT_SYMBOL_GPL(cvmx_pko_shutdown); 186 187 /** 188 * Configure a output port and the associated queues for use. 189 * 190 * @port: Port to configure. 191 * @base_queue: First queue number to associate with this port. 192 * @num_queues: Number of queues to associate with this port 193 * @priority: Array of priority levels for each queue. Values are 194 * allowed to be 0-8. A value of 8 get 8 times the traffic 195 * of a value of 1. A value of 0 indicates that no rounds 196 * will be participated in. These priorities can be changed 197 * on the fly while the pko is enabled. A priority of 9 198 * indicates that static priority should be used. If static 199 * priority is used all queues with static priority must be 200 * contiguous starting at the base_queue, and lower numbered 201 * queues have higher priority than higher numbered queues. 202 * There must be num_queues elements in the array. 203 */ 204 cvmx_pko_status_t cvmx_pko_config_port(uint64_t port, uint64_t base_queue, 205 uint64_t num_queues, 206 const uint64_t priority[]) 207 { 208 cvmx_pko_status_t result_code; 209 uint64_t queue; 210 union cvmx_pko_mem_queue_ptrs config; 211 union cvmx_pko_reg_queue_ptrs1 config1; 212 int static_priority_base = -1; 213 int static_priority_end = -1; 214 215 if ((port >= CVMX_PKO_NUM_OUTPUT_PORTS) 216 && (port != CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID)) { 217 cvmx_dprintf("ERROR: cvmx_pko_config_port: Invalid port %llu\n", 218 (unsigned long long)port); 219 return CVMX_PKO_INVALID_PORT; 220 } 221 222 if (base_queue + num_queues > CVMX_PKO_MAX_OUTPUT_QUEUES) { 223 cvmx_dprintf 224 ("ERROR: cvmx_pko_config_port: Invalid queue range %llu\n", 225 (unsigned long long)(base_queue + num_queues)); 226 return CVMX_PKO_INVALID_QUEUE; 227 } 228 229 if (port != CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID) { 230 /* 231 * Validate the static queue priority setup and set 232 * static_priority_base and static_priority_end 233 * accordingly. 234 */ 235 for (queue = 0; queue < num_queues; queue++) { 236 /* Find first queue of static priority */ 237 if (static_priority_base == -1 238 && priority[queue] == 239 CVMX_PKO_QUEUE_STATIC_PRIORITY) 240 static_priority_base = queue; 241 /* Find last queue of static priority */ 242 if (static_priority_base != -1 243 && static_priority_end == -1 244 && priority[queue] != CVMX_PKO_QUEUE_STATIC_PRIORITY 245 && queue) 246 static_priority_end = queue - 1; 247 else if (static_priority_base != -1 248 && static_priority_end == -1 249 && queue == num_queues - 1) 250 /* all queues are static priority */ 251 static_priority_end = queue; 252 /* 253 * Check to make sure all static priority 254 * queues are contiguous. Also catches some 255 * cases of static priorites not starting at 256 * queue 0. 257 */ 258 if (static_priority_end != -1 259 && (int)queue > static_priority_end 260 && priority[queue] == 261 CVMX_PKO_QUEUE_STATIC_PRIORITY) { 262 cvmx_dprintf("ERROR: cvmx_pko_config_port: " 263 "Static priority queues aren't " 264 "contiguous or don't start at " 265 "base queue. q: %d, eq: %d\n", 266 (int)queue, static_priority_end); 267 return CVMX_PKO_INVALID_PRIORITY; 268 } 269 } 270 if (static_priority_base > 0) { 271 cvmx_dprintf("ERROR: cvmx_pko_config_port: Static " 272 "priority queues don't start at base " 273 "queue. sq: %d\n", 274 static_priority_base); 275 return CVMX_PKO_INVALID_PRIORITY; 276 } 277 #if 0 278 cvmx_dprintf("Port %d: Static priority queue base: %d, " 279 "end: %d\n", port, 280 static_priority_base, static_priority_end); 281 #endif 282 } 283 /* 284 * At this point, static_priority_base and static_priority_end 285 * are either both -1, or are valid start/end queue 286 * numbers. 287 */ 288 289 result_code = CVMX_PKO_SUCCESS; 290 291 #ifdef PKO_DEBUG 292 cvmx_dprintf("num queues: %d (%lld,%lld)\n", num_queues, 293 CVMX_PKO_QUEUES_PER_PORT_INTERFACE0, 294 CVMX_PKO_QUEUES_PER_PORT_INTERFACE1); 295 #endif 296 297 for (queue = 0; queue < num_queues; queue++) { 298 uint64_t *buf_ptr = NULL; 299 300 config1.u64 = 0; 301 config1.s.idx3 = queue >> 3; 302 config1.s.qid7 = (base_queue + queue) >> 7; 303 304 config.u64 = 0; 305 config.s.tail = queue == (num_queues - 1); 306 config.s.index = queue; 307 config.s.port = port; 308 config.s.queue = base_queue + queue; 309 310 if (!cvmx_octeon_is_pass1()) { 311 config.s.static_p = static_priority_base >= 0; 312 config.s.static_q = (int)queue <= static_priority_end; 313 config.s.s_tail = (int)queue == static_priority_end; 314 } 315 /* 316 * Convert the priority into an enable bit field. Try 317 * to space the bits out evenly so the packet don't 318 * get grouped up 319 */ 320 switch ((int)priority[queue]) { 321 case 0: 322 config.s.qos_mask = 0x00; 323 break; 324 case 1: 325 config.s.qos_mask = 0x01; 326 break; 327 case 2: 328 config.s.qos_mask = 0x11; 329 break; 330 case 3: 331 config.s.qos_mask = 0x49; 332 break; 333 case 4: 334 config.s.qos_mask = 0x55; 335 break; 336 case 5: 337 config.s.qos_mask = 0x57; 338 break; 339 case 6: 340 config.s.qos_mask = 0x77; 341 break; 342 case 7: 343 config.s.qos_mask = 0x7f; 344 break; 345 case 8: 346 config.s.qos_mask = 0xff; 347 break; 348 case CVMX_PKO_QUEUE_STATIC_PRIORITY: 349 /* Pass 1 will fall through to the error case */ 350 if (!cvmx_octeon_is_pass1()) { 351 config.s.qos_mask = 0xff; 352 break; 353 } 354 default: 355 cvmx_dprintf("ERROR: cvmx_pko_config_port: Invalid " 356 "priority %llu\n", 357 (unsigned long long)priority[queue]); 358 config.s.qos_mask = 0xff; 359 result_code = CVMX_PKO_INVALID_PRIORITY; 360 break; 361 } 362 363 if (port != CVMX_PKO_MEM_QUEUE_PTRS_ILLEGAL_PID) { 364 cvmx_cmd_queue_result_t cmd_res = 365 cvmx_cmd_queue_initialize(CVMX_CMD_QUEUE_PKO 366 (base_queue + queue), 367 CVMX_PKO_MAX_QUEUE_DEPTH, 368 CVMX_FPA_OUTPUT_BUFFER_POOL, 369 CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE 370 - 371 CVMX_PKO_COMMAND_BUFFER_SIZE_ADJUST 372 * 8); 373 if (cmd_res != CVMX_CMD_QUEUE_SUCCESS) { 374 switch (cmd_res) { 375 case CVMX_CMD_QUEUE_NO_MEMORY: 376 cvmx_dprintf("ERROR: " 377 "cvmx_pko_config_port: " 378 "Unable to allocate " 379 "output buffer.\n"); 380 return CVMX_PKO_NO_MEMORY; 381 case CVMX_CMD_QUEUE_ALREADY_SETUP: 382 cvmx_dprintf 383 ("ERROR: cvmx_pko_config_port: Port already setup.\n"); 384 return CVMX_PKO_PORT_ALREADY_SETUP; 385 case CVMX_CMD_QUEUE_INVALID_PARAM: 386 default: 387 cvmx_dprintf 388 ("ERROR: cvmx_pko_config_port: Command queue initialization failed.\n"); 389 return CVMX_PKO_CMD_QUEUE_INIT_ERROR; 390 } 391 } 392 393 buf_ptr = 394 (uint64_t *) 395 cvmx_cmd_queue_buffer(CVMX_CMD_QUEUE_PKO 396 (base_queue + queue)); 397 config.s.buf_ptr = cvmx_ptr_to_phys(buf_ptr); 398 } else 399 config.s.buf_ptr = 0; 400 401 CVMX_SYNCWS; 402 403 if (!OCTEON_IS_MODEL(OCTEON_CN3XXX)) 404 cvmx_write_csr(CVMX_PKO_REG_QUEUE_PTRS1, config1.u64); 405 cvmx_write_csr(CVMX_PKO_MEM_QUEUE_PTRS, config.u64); 406 } 407 408 return result_code; 409 } 410 411 #ifdef PKO_DEBUG 412 /** 413 * Show map of ports -> queues for different cores. 414 */ 415 void cvmx_pko_show_queue_map() 416 { 417 int core, port; 418 int pko_output_ports = 36; 419 420 cvmx_dprintf("port"); 421 for (port = 0; port < pko_output_ports; port++) 422 cvmx_dprintf("%3d ", port); 423 cvmx_dprintf("\n"); 424 425 for (core = 0; core < CVMX_MAX_CORES; core++) { 426 cvmx_dprintf("\n%2d: ", core); 427 for (port = 0; port < pko_output_ports; port++) { 428 cvmx_dprintf("%3d ", 429 cvmx_pko_get_base_queue_per_core(port, 430 core)); 431 } 432 } 433 cvmx_dprintf("\n"); 434 } 435 #endif 436 437 /** 438 * Rate limit a PKO port to a max packets/sec. This function is only 439 * supported on CN51XX and higher, excluding CN58XX. 440 * 441 * @port: Port to rate limit 442 * @packets_s: Maximum packet/sec 443 * @burst: Maximum number of packets to burst in a row before rate 444 * limiting cuts in. 445 * 446 * Returns Zero on success, negative on failure 447 */ 448 int cvmx_pko_rate_limit_packets(int port, int packets_s, int burst) 449 { 450 union cvmx_pko_mem_port_rate0 pko_mem_port_rate0; 451 union cvmx_pko_mem_port_rate1 pko_mem_port_rate1; 452 453 pko_mem_port_rate0.u64 = 0; 454 pko_mem_port_rate0.s.pid = port; 455 pko_mem_port_rate0.s.rate_pkt = 456 cvmx_sysinfo_get()->cpu_clock_hz / packets_s / 16; 457 /* No cost per word since we are limited by packets/sec, not bits/sec */ 458 pko_mem_port_rate0.s.rate_word = 0; 459 460 pko_mem_port_rate1.u64 = 0; 461 pko_mem_port_rate1.s.pid = port; 462 pko_mem_port_rate1.s.rate_lim = 463 ((uint64_t) pko_mem_port_rate0.s.rate_pkt * burst) >> 8; 464 465 cvmx_write_csr(CVMX_PKO_MEM_PORT_RATE0, pko_mem_port_rate0.u64); 466 cvmx_write_csr(CVMX_PKO_MEM_PORT_RATE1, pko_mem_port_rate1.u64); 467 return 0; 468 } 469 470 /** 471 * Rate limit a PKO port to a max bits/sec. This function is only 472 * supported on CN51XX and higher, excluding CN58XX. 473 * 474 * @port: Port to rate limit 475 * @bits_s: PKO rate limit in bits/sec 476 * @burst: Maximum number of bits to burst before rate 477 * limiting cuts in. 478 * 479 * Returns Zero on success, negative on failure 480 */ 481 int cvmx_pko_rate_limit_bits(int port, uint64_t bits_s, int burst) 482 { 483 union cvmx_pko_mem_port_rate0 pko_mem_port_rate0; 484 union cvmx_pko_mem_port_rate1 pko_mem_port_rate1; 485 uint64_t clock_rate = cvmx_sysinfo_get()->cpu_clock_hz; 486 uint64_t tokens_per_bit = clock_rate * 16 / bits_s; 487 488 pko_mem_port_rate0.u64 = 0; 489 pko_mem_port_rate0.s.pid = port; 490 /* 491 * Each packet has a 12 bytes of interframe gap, an 8 byte 492 * preamble, and a 4 byte CRC. These are not included in the 493 * per word count. Multiply by 8 to covert to bits and divide 494 * by 256 for limit granularity. 495 */ 496 pko_mem_port_rate0.s.rate_pkt = (12 + 8 + 4) * 8 * tokens_per_bit / 256; 497 /* Each 8 byte word has 64bits */ 498 pko_mem_port_rate0.s.rate_word = 64 * tokens_per_bit; 499 500 pko_mem_port_rate1.u64 = 0; 501 pko_mem_port_rate1.s.pid = port; 502 pko_mem_port_rate1.s.rate_lim = tokens_per_bit * burst / 256; 503 504 cvmx_write_csr(CVMX_PKO_MEM_PORT_RATE0, pko_mem_port_rate0.u64); 505 cvmx_write_csr(CVMX_PKO_MEM_PORT_RATE1, pko_mem_port_rate1.u64); 506 return 0; 507 } 508