xref: /openbmc/linux/arch/mips/cavium-octeon/Kconfig (revision d0b73b48)
1if CPU_CAVIUM_OCTEON
2
3config CAVIUM_CN63XXP1
4	bool "Enable CN63XXP1 errata worarounds"
5	default "n"
6	help
7	  The CN63XXP1 chip requires build time workarounds to
8	  function reliably, select this option to enable them.  These
9	  workarounds will cause a slight decrease in performance on
10	  non-CN63XXP1 hardware, so it is recommended to select "n"
11	  unless it is known the workarounds are needed.
12
13config CAVIUM_OCTEON_2ND_KERNEL
14	bool "Build the kernel to be used as a 2nd kernel on the same chip"
15	default "n"
16	help
17	  This option configures this kernel to be linked at a different
18	  address and use the 2nd uart for output. This allows a kernel built
19	  with this option to be run at the same time as one built without this
20	  option.
21
22config CAVIUM_OCTEON_HW_FIX_UNALIGNED
23	bool "Enable hardware fixups of unaligned loads and stores"
24	default "y"
25	help
26	  Configure the Octeon hardware to automatically fix unaligned loads
27	  and stores. Normally unaligned accesses are fixed using a kernel
28	  exception handler. This option enables the hardware automatic fixups,
29	  which requires only an extra 3 cycles. Disable this option if you
30	  are running code that relies on address exceptions on unaligned
31	  accesses.
32
33config CAVIUM_OCTEON_CVMSEG_SIZE
34	int "Number of L1 cache lines reserved for CVMSEG memory"
35	range 0 54
36	default 1
37	help
38	  CVMSEG LM is a segment that accesses portions of the dcache as a
39	  local memory; the larger CVMSEG is, the smaller the cache is.
40	  This selects the size of CVMSEG LM, which is in cache blocks. The
41	  legally range is from zero to 54 cache blocks (i.e. CVMSEG LM is
42	  between zero and 6192 bytes).
43
44config CAVIUM_OCTEON_LOCK_L2
45	bool "Lock often used kernel code in the L2"
46	default "y"
47	help
48	  Enable locking parts of the kernel into the L2 cache.
49
50config CAVIUM_OCTEON_LOCK_L2_TLB
51	bool "Lock the TLB handler in L2"
52	depends on CAVIUM_OCTEON_LOCK_L2
53	default "y"
54	help
55	  Lock the low level TLB fast path into L2.
56
57config CAVIUM_OCTEON_LOCK_L2_EXCEPTION
58	bool "Lock the exception handler in L2"
59	depends on CAVIUM_OCTEON_LOCK_L2
60	default "y"
61	help
62	  Lock the low level exception handler into L2.
63
64config CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT
65	bool "Lock the interrupt handler in L2"
66	depends on CAVIUM_OCTEON_LOCK_L2
67	default "y"
68	help
69	  Lock the low level interrupt handler into L2.
70
71config CAVIUM_OCTEON_LOCK_L2_INTERRUPT
72	bool "Lock the 2nd level interrupt handler in L2"
73	depends on CAVIUM_OCTEON_LOCK_L2
74	default "y"
75	help
76	  Lock the 2nd level interrupt handler in L2.
77
78config CAVIUM_OCTEON_LOCK_L2_MEMCPY
79	bool "Lock memcpy() in L2"
80	depends on CAVIUM_OCTEON_LOCK_L2
81	default "y"
82	help
83	  Lock the kernel's implementation of memcpy() into L2.
84
85config IOMMU_HELPER
86	bool
87
88config NEED_SG_DMA_LENGTH
89	bool
90
91config SWIOTLB
92	def_bool y
93	select IOMMU_HELPER
94	select NEED_SG_DMA_LENGTH
95
96
97endif # CPU_CAVIUM_OCTEON
98