1// SPDX-License-Identifier: GPL-2.0 2#include <dt-bindings/clock/ingenic,tcu.h> 3#include <dt-bindings/clock/ingenic,x1000-cgu.h> 4#include <dt-bindings/dma/x1000-dma.h> 5 6/ { 7 #address-cells = <1>; 8 #size-cells = <1>; 9 compatible = "ingenic,x1000", "ingenic,x1000e"; 10 11 cpus { 12 #address-cells = <1>; 13 #size-cells = <0>; 14 15 cpu0: cpu@0 { 16 device_type = "cpu"; 17 compatible = "ingenic,xburst-fpu1.0-mxu1.1"; 18 reg = <0>; 19 20 clocks = <&cgu X1000_CLK_CPU>; 21 clock-names = "cpu"; 22 }; 23 }; 24 25 cpuintc: interrupt-controller { 26 #address-cells = <0>; 27 #interrupt-cells = <1>; 28 interrupt-controller; 29 compatible = "mti,cpu-interrupt-controller"; 30 }; 31 32 intc: interrupt-controller@10001000 { 33 compatible = "ingenic,x1000-intc", "ingenic,jz4780-intc"; 34 reg = <0x10001000 0x50>; 35 36 interrupt-controller; 37 #interrupt-cells = <1>; 38 39 interrupt-parent = <&cpuintc>; 40 interrupts = <2>; 41 }; 42 43 exclk: ext { 44 compatible = "fixed-clock"; 45 #clock-cells = <0>; 46 }; 47 48 rtclk: rtc { 49 compatible = "fixed-clock"; 50 #clock-cells = <0>; 51 clock-frequency = <32768>; 52 }; 53 54 cgu: x1000-cgu@10000000 { 55 compatible = "ingenic,x1000-cgu", "simple-mfd"; 56 reg = <0x10000000 0x100>; 57 #address-cells = <1>; 58 #size-cells = <1>; 59 ranges = <0x0 0x10000000 0x100>; 60 61 #clock-cells = <1>; 62 63 clocks = <&exclk>, <&rtclk>; 64 clock-names = "ext", "rtc"; 65 66 otg_phy: usb-phy@3c { 67 compatible = "ingenic,x1000-phy"; 68 reg = <0x3c 0x10>; 69 70 clocks = <&cgu X1000_CLK_OTGPHY>; 71 72 #phy-cells = <0>; 73 74 status = "disabled"; 75 }; 76 77 rng: rng@d8 { 78 compatible = "ingenic,x1000-rng"; 79 reg = <0xd8 0x8>; 80 81 status = "disabled"; 82 }; 83 84 mac_phy_ctrl: mac-phy-ctrl@e8 { 85 compatible = "syscon"; 86 reg = <0xe8 0x4>; 87 }; 88 }; 89 90 ost: timer@12000000 { 91 compatible = "ingenic,x1000-ost"; 92 reg = <0x12000000 0x3c>; 93 94 #clock-cells = <1>; 95 96 clocks = <&cgu X1000_CLK_OST>; 97 clock-names = "ost"; 98 99 interrupt-parent = <&cpuintc>; 100 interrupts = <3>; 101 }; 102 103 tcu: timer@10002000 { 104 compatible = "ingenic,x1000-tcu", "simple-mfd"; 105 reg = <0x10002000 0x1000>; 106 #address-cells = <1>; 107 #size-cells = <1>; 108 ranges = <0x0 0x10002000 0x1000>; 109 110 #clock-cells = <1>; 111 112 clocks = <&cgu X1000_CLK_RTCLK>, 113 <&cgu X1000_CLK_EXCLK>, 114 <&cgu X1000_CLK_PCLK>, 115 <&cgu X1000_CLK_TCU>; 116 clock-names = "rtc", "ext", "pclk", "tcu"; 117 118 interrupt-controller; 119 #interrupt-cells = <1>; 120 121 interrupt-parent = <&intc>; 122 interrupts = <27 26 25>; 123 124 wdt: watchdog@0 { 125 compatible = "ingenic,x1000-watchdog", "ingenic,jz4780-watchdog"; 126 reg = <0x0 0x10>; 127 128 clocks = <&tcu TCU_CLK_WDT>; 129 clock-names = "wdt"; 130 }; 131 132 pwm: pwm@40 { 133 compatible = "ingenic,x1000-pwm"; 134 reg = <0x40 0x50>; 135 136 #pwm-cells = <3>; 137 138 clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>, 139 <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_TIMER3>, 140 <&tcu TCU_CLK_TIMER4>; 141 clock-names = "timer0", "timer1", "timer2", "timer3", "timer4"; 142 }; 143 }; 144 145 rtc: rtc@10003000 { 146 compatible = "ingenic,x1000-rtc", "ingenic,jz4780-rtc"; 147 reg = <0x10003000 0x4c>; 148 149 interrupt-parent = <&intc>; 150 interrupts = <32>; 151 152 clocks = <&cgu X1000_CLK_RTCLK>; 153 clock-names = "rtc"; 154 }; 155 156 pinctrl: pin-controller@10010000 { 157 compatible = "ingenic,x1000-pinctrl"; 158 reg = <0x10010000 0x800>; 159 #address-cells = <1>; 160 #size-cells = <0>; 161 162 gpa: gpio@0 { 163 compatible = "ingenic,x1000-gpio"; 164 reg = <0>; 165 166 gpio-controller; 167 gpio-ranges = <&pinctrl 0 0 32>; 168 #gpio-cells = <2>; 169 170 interrupt-controller; 171 #interrupt-cells = <2>; 172 173 interrupt-parent = <&intc>; 174 interrupts = <17>; 175 }; 176 177 gpb: gpio@1 { 178 compatible = "ingenic,x1000-gpio"; 179 reg = <1>; 180 181 gpio-controller; 182 gpio-ranges = <&pinctrl 0 32 32>; 183 #gpio-cells = <2>; 184 185 interrupt-controller; 186 #interrupt-cells = <2>; 187 188 interrupt-parent = <&intc>; 189 interrupts = <16>; 190 }; 191 192 gpc: gpio@2 { 193 compatible = "ingenic,x1000-gpio"; 194 reg = <2>; 195 196 gpio-controller; 197 gpio-ranges = <&pinctrl 0 64 32>; 198 #gpio-cells = <2>; 199 200 interrupt-controller; 201 #interrupt-cells = <2>; 202 203 interrupt-parent = <&intc>; 204 interrupts = <15>; 205 }; 206 207 gpd: gpio@3 { 208 compatible = "ingenic,x1000-gpio"; 209 reg = <3>; 210 211 gpio-controller; 212 gpio-ranges = <&pinctrl 0 96 32>; 213 #gpio-cells = <2>; 214 215 interrupt-controller; 216 #interrupt-cells = <2>; 217 218 interrupt-parent = <&intc>; 219 interrupts = <14>; 220 }; 221 }; 222 223 uart0: serial@10030000 { 224 compatible = "ingenic,x1000-uart"; 225 reg = <0x10030000 0x100>; 226 227 interrupt-parent = <&intc>; 228 interrupts = <51>; 229 230 clocks = <&exclk>, <&cgu X1000_CLK_UART0>; 231 clock-names = "baud", "module"; 232 233 status = "disabled"; 234 }; 235 236 uart1: serial@10031000 { 237 compatible = "ingenic,x1000-uart"; 238 reg = <0x10031000 0x100>; 239 240 interrupt-parent = <&intc>; 241 interrupts = <50>; 242 243 clocks = <&exclk>, <&cgu X1000_CLK_UART1>; 244 clock-names = "baud", "module"; 245 246 status = "disabled"; 247 }; 248 249 uart2: serial@10032000 { 250 compatible = "ingenic,x1000-uart"; 251 reg = <0x10032000 0x100>; 252 253 interrupt-parent = <&intc>; 254 interrupts = <49>; 255 256 clocks = <&exclk>, <&cgu X1000_CLK_UART2>; 257 clock-names = "baud", "module"; 258 259 status = "disabled"; 260 }; 261 262 ssi: spi@10043000 { 263 compatible = "ingenic,x1000-spi"; 264 reg = <0x10043000 0x20>; 265 #address-cells = <1>; 266 #size-cells = <0>; 267 268 interrupt-parent = <&intc>; 269 interrupts = <8>; 270 271 clocks = <&cgu X1000_CLK_SSI>; 272 clock-names = "spi"; 273 274 dmas = <&pdma X1000_DMA_SSI0_RX 0xffffffff>, 275 <&pdma X1000_DMA_SSI0_TX 0xffffffff>; 276 dma-names = "rx", "tx"; 277 278 status = "disabled"; 279 }; 280 281 i2c0: i2c-controller@10050000 { 282 compatible = "ingenic,x1000-i2c"; 283 reg = <0x10050000 0x1000>; 284 #address-cells = <1>; 285 #size-cells = <0>; 286 287 interrupt-parent = <&intc>; 288 interrupts = <60>; 289 290 clocks = <&cgu X1000_CLK_I2C0>; 291 292 status = "disabled"; 293 }; 294 295 i2c1: i2c-controller@10051000 { 296 compatible = "ingenic,x1000-i2c"; 297 reg = <0x10051000 0x1000>; 298 #address-cells = <1>; 299 #size-cells = <0>; 300 301 interrupt-parent = <&intc>; 302 interrupts = <59>; 303 304 clocks = <&cgu X1000_CLK_I2C1>; 305 306 status = "disabled"; 307 }; 308 309 i2c2: i2c-controller@10052000 { 310 compatible = "ingenic,x1000-i2c"; 311 reg = <0x10052000 0x1000>; 312 #address-cells = <1>; 313 #size-cells = <0>; 314 315 interrupt-parent = <&intc>; 316 interrupts = <58>; 317 318 clocks = <&cgu X1000_CLK_I2C2>; 319 320 status = "disabled"; 321 }; 322 323 pdma: dma-controller@13420000 { 324 compatible = "ingenic,x1000-dma"; 325 reg = <0x13420000 0x400>, <0x13421000 0x40>; 326 327 #dma-cells = <2>; 328 329 interrupt-parent = <&intc>; 330 interrupts = <10>; 331 332 clocks = <&cgu X1000_CLK_PDMA>; 333 }; 334 335 msc0: mmc@13450000 { 336 compatible = "ingenic,x1000-mmc"; 337 reg = <0x13450000 0x1000>; 338 339 interrupt-parent = <&intc>; 340 interrupts = <37>; 341 342 clocks = <&cgu X1000_CLK_MSC0>; 343 clock-names = "mmc"; 344 345 cap-sd-highspeed; 346 cap-mmc-highspeed; 347 cap-sdio-irq; 348 349 dmas = <&pdma X1000_DMA_MSC0_RX 0xffffffff>, 350 <&pdma X1000_DMA_MSC0_TX 0xffffffff>; 351 dma-names = "rx", "tx"; 352 353 status = "disabled"; 354 }; 355 356 msc1: mmc@13460000 { 357 compatible = "ingenic,x1000-mmc"; 358 reg = <0x13460000 0x1000>; 359 360 interrupt-parent = <&intc>; 361 interrupts = <36>; 362 363 clocks = <&cgu X1000_CLK_MSC1>; 364 clock-names = "mmc"; 365 366 cap-sd-highspeed; 367 cap-mmc-highspeed; 368 cap-sdio-irq; 369 370 dmas = <&pdma X1000_DMA_MSC1_RX 0xffffffff>, 371 <&pdma X1000_DMA_MSC1_TX 0xffffffff>; 372 dma-names = "rx", "tx"; 373 374 status = "disabled"; 375 }; 376 377 mac: ethernet@134b0000 { 378 compatible = "ingenic,x1000-mac", "snps,dwmac"; 379 reg = <0x134b0000 0x2000>; 380 381 interrupt-parent = <&intc>; 382 interrupts = <55>; 383 interrupt-names = "macirq"; 384 385 clocks = <&cgu X1000_CLK_MAC>; 386 clock-names = "stmmaceth"; 387 388 mode-reg = <&mac_phy_ctrl>; 389 390 status = "disabled"; 391 392 mdio: mdio { 393 compatible = "snps,dwmac-mdio"; 394 #address-cells = <1>; 395 #size-cells = <0>; 396 397 status = "disabled"; 398 }; 399 }; 400 401 otg: usb@13500000 { 402 compatible = "ingenic,x1000-otg"; 403 reg = <0x13500000 0x40000>; 404 405 interrupt-parent = <&intc>; 406 interrupts = <21>; 407 408 clocks = <&cgu X1000_CLK_OTG>; 409 clock-names = "otg"; 410 411 phys = <&otg_phy>; 412 phy-names = "usb2-phy"; 413 414 g-rx-fifo-size = <768>; 415 g-np-tx-fifo-size = <256>; 416 g-tx-fifo-size = <256 256 256 256 256 256 256 512>; 417 418 status = "disabled"; 419 }; 420}; 421