1/ { 2 #address-cells = <1>; 3 #size-cells = <1>; 4 compatible = "brcm,bcm7358"; 5 6 cpus { 7 #address-cells = <1>; 8 #size-cells = <0>; 9 10 mips-hpt-frequency = <375000000>; 11 12 cpu@0 { 13 compatible = "brcm,bmips3300"; 14 device_type = "cpu"; 15 reg = <0>; 16 }; 17 }; 18 19 aliases { 20 uart0 = &uart0; 21 uart1 = &uart1; 22 uart2 = &uart2; 23 }; 24 25 cpu_intc: cpu_intc { 26 #address-cells = <0>; 27 compatible = "mti,cpu-interrupt-controller"; 28 29 interrupt-controller; 30 #interrupt-cells = <1>; 31 }; 32 33 clocks { 34 uart_clk: uart_clk { 35 compatible = "fixed-clock"; 36 #clock-cells = <0>; 37 clock-frequency = <81000000>; 38 }; 39 }; 40 41 rdb { 42 #address-cells = <1>; 43 #size-cells = <1>; 44 45 compatible = "simple-bus"; 46 ranges = <0 0x10000000 0x01000000>; 47 48 periph_intc: periph_intc@411400 { 49 compatible = "brcm,bcm7038-l1-intc"; 50 reg = <0x411400 0x30>; 51 52 interrupt-controller; 53 #interrupt-cells = <1>; 54 55 interrupt-parent = <&cpu_intc>; 56 interrupts = <2>; 57 }; 58 59 sun_l2_intc: sun_l2_intc@403000 { 60 compatible = "brcm,l2-intc"; 61 reg = <0x403000 0x30>; 62 interrupt-controller; 63 #interrupt-cells = <1>; 64 interrupt-parent = <&periph_intc>; 65 interrupts = <48>; 66 }; 67 68 gisb-arb@400000 { 69 compatible = "brcm,bcm7400-gisb-arb"; 70 reg = <0x400000 0xdc>; 71 native-endian; 72 interrupt-parent = <&sun_l2_intc>; 73 interrupts = <0>, <2>; 74 brcm,gisb-arb-master-mask = <0x2f3>; 75 brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", 76 "rdc_0", "raaga_0", 77 "avd_0", "jtag_0"; 78 }; 79 80 upg_irq0_intc: upg_irq0_intc@406600 { 81 compatible = "brcm,bcm7120-l2-intc"; 82 reg = <0x406600 0x8>; 83 84 brcm,int-map-mask = <0x44>, <0x7000000>; 85 brcm,int-fwd-mask = <0x70000>; 86 87 interrupt-controller; 88 #interrupt-cells = <1>; 89 90 interrupt-parent = <&periph_intc>; 91 interrupts = <56>, <54>; 92 interrupt-names = "upg_main", "upg_bsc"; 93 }; 94 95 upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 { 96 compatible = "brcm,bcm7120-l2-intc"; 97 reg = <0x408b80 0x8>; 98 99 brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>; 100 brcm,int-fwd-mask = <0>; 101 brcm,irq-can-wake; 102 103 interrupt-controller; 104 #interrupt-cells = <1>; 105 106 interrupt-parent = <&periph_intc>; 107 interrupts = <57>, <55>, <59>; 108 interrupt-names = "upg_main_aon", "upg_bsc_aon", 109 "upg_spi"; 110 }; 111 112 sun_top_ctrl: syscon@404000 { 113 compatible = "brcm,bcm7358-sun-top-ctrl", "syscon"; 114 reg = <0x404000 0x51c>; 115 }; 116 117 reboot { 118 compatible = "brcm,brcmstb-reboot"; 119 syscon = <&sun_top_ctrl 0x304 0x308>; 120 }; 121 122 uart0: serial@406800 { 123 compatible = "ns16550a"; 124 reg = <0x406800 0x20>; 125 reg-io-width = <0x4>; 126 reg-shift = <0x2>; 127 native-endian; 128 interrupt-parent = <&periph_intc>; 129 interrupts = <61>; 130 clocks = <&uart_clk>; 131 status = "disabled"; 132 }; 133 134 uart1: serial@406840 { 135 compatible = "ns16550a"; 136 reg = <0x406840 0x20>; 137 reg-io-width = <0x4>; 138 reg-shift = <0x2>; 139 native-endian; 140 interrupt-parent = <&periph_intc>; 141 interrupts = <62>; 142 clocks = <&uart_clk>; 143 status = "disabled"; 144 }; 145 146 uart2: serial@406880 { 147 compatible = "ns16550a"; 148 reg = <0x406880 0x20>; 149 reg-io-width = <0x4>; 150 reg-shift = <0x2>; 151 native-endian; 152 interrupt-parent = <&periph_intc>; 153 interrupts = <63>; 154 clocks = <&uart_clk>; 155 status = "disabled"; 156 }; 157 158 bsca: i2c@406200 { 159 clock-frequency = <390000>; 160 compatible = "brcm,brcmstb-i2c"; 161 interrupt-parent = <&upg_irq0_intc>; 162 reg = <0x406200 0x58>; 163 interrupts = <24>; 164 interrupt-names = "upg_bsca"; 165 status = "disabled"; 166 }; 167 168 bscb: i2c@406280 { 169 clock-frequency = <390000>; 170 compatible = "brcm,brcmstb-i2c"; 171 interrupt-parent = <&upg_irq0_intc>; 172 reg = <0x406280 0x58>; 173 interrupts = <25>; 174 interrupt-names = "upg_bscb"; 175 status = "disabled"; 176 }; 177 178 bscc: i2c@406300 { 179 clock-frequency = <390000>; 180 compatible = "brcm,brcmstb-i2c"; 181 interrupt-parent = <&upg_irq0_intc>; 182 reg = <0x406300 0x58>; 183 interrupts = <26>; 184 interrupt-names = "upg_bscc"; 185 status = "disabled"; 186 }; 187 188 bscd: i2c@408980 { 189 clock-frequency = <390000>; 190 compatible = "brcm,brcmstb-i2c"; 191 interrupt-parent = <&upg_aon_irq0_intc>; 192 reg = <0x408980 0x58>; 193 interrupts = <27>; 194 interrupt-names = "upg_bscd"; 195 status = "disabled"; 196 }; 197 198 enet0: ethernet@430000 { 199 phy-mode = "internal"; 200 phy-handle = <&phy1>; 201 mac-address = [ 00 10 18 36 23 1a ]; 202 compatible = "brcm,genet-v2"; 203 #address-cells = <0x1>; 204 #size-cells = <0x1>; 205 reg = <0x430000 0x4c8c>; 206 interrupts = <24>, <25>; 207 interrupt-parent = <&periph_intc>; 208 status = "disabled"; 209 210 mdio@e14 { 211 compatible = "brcm,genet-mdio-v2"; 212 #address-cells = <0x1>; 213 #size-cells = <0x0>; 214 reg = <0xe14 0x8>; 215 216 phy1: ethernet-phy@1 { 217 max-speed = <100>; 218 reg = <0x1>; 219 compatible = "brcm,40nm-ephy", 220 "ethernet-phy-ieee802.3-c22"; 221 }; 222 }; 223 }; 224 225 ehci0: usb@480300 { 226 compatible = "brcm,bcm7358-ehci", "generic-ehci"; 227 reg = <0x480300 0x100>; 228 native-endian; 229 interrupt-parent = <&periph_intc>; 230 interrupts = <65>; 231 status = "disabled"; 232 }; 233 234 ohci0: usb@480400 { 235 compatible = "brcm,bcm7358-ohci", "generic-ohci"; 236 reg = <0x480400 0x100>; 237 native-endian; 238 no-big-frame-no; 239 interrupt-parent = <&periph_intc>; 240 interrupts = <66>; 241 status = "disabled"; 242 }; 243 }; 244}; 245