1/ { 2 #address-cells = <1>; 3 #size-cells = <1>; 4 compatible = "brcm,bcm7346"; 5 6 cpus { 7 #address-cells = <1>; 8 #size-cells = <0>; 9 10 mips-hpt-frequency = <163125000>; 11 12 cpu@0 { 13 compatible = "brcm,bmips5000"; 14 device_type = "cpu"; 15 reg = <0>; 16 }; 17 18 cpu@1 { 19 compatible = "brcm,bmips5000"; 20 device_type = "cpu"; 21 reg = <1>; 22 }; 23 }; 24 25 aliases { 26 uart0 = &uart0; 27 }; 28 29 cpu_intc: interrupt-controller { 30 #address-cells = <0>; 31 compatible = "mti,cpu-interrupt-controller"; 32 33 interrupt-controller; 34 #interrupt-cells = <1>; 35 }; 36 37 clocks { 38 uart_clk: uart_clk { 39 compatible = "fixed-clock"; 40 #clock-cells = <0>; 41 clock-frequency = <81000000>; 42 }; 43 44 upg_clk: upg_clk { 45 compatible = "fixed-clock"; 46 #clock-cells = <0>; 47 clock-frequency = <27000000>; 48 }; 49 }; 50 51 rdb { 52 #address-cells = <1>; 53 #size-cells = <1>; 54 55 compatible = "simple-bus"; 56 ranges = <0 0x10000000 0x01000000>; 57 58 periph_intc: interrupt-controller@411400 { 59 compatible = "brcm,bcm7038-l1-intc"; 60 reg = <0x411400 0x30>, <0x411600 0x30>; 61 62 interrupt-controller; 63 #interrupt-cells = <1>; 64 65 interrupt-parent = <&cpu_intc>; 66 interrupts = <2>, <3>; 67 }; 68 69 sun_l2_intc: interrupt-controller@403000 { 70 compatible = "brcm,l2-intc"; 71 reg = <0x403000 0x30>; 72 interrupt-controller; 73 #interrupt-cells = <1>; 74 interrupt-parent = <&periph_intc>; 75 interrupts = <51>; 76 }; 77 78 gisb-arb@400000 { 79 compatible = "brcm,bcm7400-gisb-arb"; 80 reg = <0x400000 0xdc>; 81 native-endian; 82 interrupt-parent = <&sun_l2_intc>; 83 interrupts = <0>, <2>; 84 brcm,gisb-arb-master-mask = <0x673>; 85 brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0", 86 "rdc_0", "raaga_0", 87 "jtag_0", "svd_0"; 88 }; 89 90 upg_irq0_intc: interrupt-controller@406780 { 91 compatible = "brcm,bcm7120-l2-intc"; 92 reg = <0x406780 0x8>; 93 94 brcm,int-map-mask = <0x44>, <0xf000000>; 95 brcm,int-fwd-mask = <0x70000>; 96 97 interrupt-controller; 98 #interrupt-cells = <1>; 99 100 interrupt-parent = <&periph_intc>; 101 interrupts = <59>, <57>; 102 interrupt-names = "upg_main", "upg_bsc"; 103 }; 104 105 upg_aon_irq0_intc: interrupt-controller@408b80 { 106 compatible = "brcm,bcm7120-l2-intc"; 107 reg = <0x408b80 0x8>; 108 109 brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>; 110 brcm,int-fwd-mask = <0>; 111 brcm,irq-can-wake; 112 113 interrupt-controller; 114 #interrupt-cells = <1>; 115 116 interrupt-parent = <&periph_intc>; 117 interrupts = <60>, <58>, <62>; 118 interrupt-names = "upg_main_aon", "upg_bsc_aon", 119 "upg_spi"; 120 }; 121 122 sun_top_ctrl: syscon@404000 { 123 compatible = "brcm,bcm7346-sun-top-ctrl", "syscon"; 124 reg = <0x404000 0x51c>; 125 native-endian; 126 }; 127 128 reboot { 129 compatible = "brcm,brcmstb-reboot"; 130 syscon = <&sun_top_ctrl 0x304 0x308>; 131 }; 132 133 uart0: serial@406900 { 134 compatible = "ns16550a"; 135 reg = <0x406900 0x20>; 136 reg-io-width = <0x4>; 137 reg-shift = <0x2>; 138 native-endian; 139 interrupt-parent = <&periph_intc>; 140 interrupts = <64>; 141 clocks = <&uart_clk>; 142 status = "disabled"; 143 }; 144 145 uart1: serial@406940 { 146 compatible = "ns16550a"; 147 reg = <0x406940 0x20>; 148 reg-io-width = <0x4>; 149 reg-shift = <0x2>; 150 native-endian; 151 interrupt-parent = <&periph_intc>; 152 interrupts = <65>; 153 clocks = <&uart_clk>; 154 status = "disabled"; 155 }; 156 157 uart2: serial@406980 { 158 compatible = "ns16550a"; 159 reg = <0x406980 0x20>; 160 reg-io-width = <0x4>; 161 reg-shift = <0x2>; 162 native-endian; 163 interrupt-parent = <&periph_intc>; 164 interrupts = <66>; 165 clocks = <&uart_clk>; 166 status = "disabled"; 167 }; 168 169 bsca: i2c@406200 { 170 clock-frequency = <390000>; 171 compatible = "brcm,brcmstb-i2c"; 172 interrupt-parent = <&upg_irq0_intc>; 173 reg = <0x406200 0x58>; 174 interrupts = <24>; 175 interrupt-names = "upg_bsca"; 176 status = "disabled"; 177 }; 178 179 bscb: i2c@406280 { 180 clock-frequency = <390000>; 181 compatible = "brcm,brcmstb-i2c"; 182 interrupt-parent = <&upg_irq0_intc>; 183 reg = <0x406280 0x58>; 184 interrupts = <25>; 185 interrupt-names = "upg_bscb"; 186 status = "disabled"; 187 }; 188 189 bscc: i2c@406300 { 190 clock-frequency = <390000>; 191 compatible = "brcm,brcmstb-i2c"; 192 interrupt-parent = <&upg_irq0_intc>; 193 reg = <0x406300 0x58>; 194 interrupts = <26>; 195 interrupt-names = "upg_bscc"; 196 status = "disabled"; 197 }; 198 199 bscd: i2c@406380 { 200 clock-frequency = <390000>; 201 compatible = "brcm,brcmstb-i2c"; 202 interrupt-parent = <&upg_irq0_intc>; 203 reg = <0x406380 0x58>; 204 interrupts = <27>; 205 interrupt-names = "upg_bscd"; 206 status = "disabled"; 207 }; 208 209 bsce: i2c@408980 { 210 clock-frequency = <390000>; 211 compatible = "brcm,brcmstb-i2c"; 212 interrupt-parent = <&upg_aon_irq0_intc>; 213 reg = <0x408980 0x58>; 214 interrupts = <27>; 215 interrupt-names = "upg_bsce"; 216 status = "disabled"; 217 }; 218 219 pwma: pwm@406580 { 220 compatible = "brcm,bcm7038-pwm"; 221 reg = <0x406580 0x28>; 222 #pwm-cells = <2>; 223 clocks = <&upg_clk>; 224 status = "disabled"; 225 }; 226 227 pwmb: pwm@406800 { 228 compatible = "brcm,bcm7038-pwm"; 229 reg = <0x406800 0x28>; 230 #pwm-cells = <2>; 231 clocks = <&upg_clk>; 232 status = "disabled"; 233 }; 234 235 aon_pm_l2_intc: interrupt-controller@408440 { 236 compatible = "brcm,l2-intc"; 237 reg = <0x408440 0x30>; 238 interrupt-controller; 239 #interrupt-cells = <1>; 240 interrupt-parent = <&periph_intc>; 241 interrupts = <53>; 242 brcm,irq-can-wake; 243 }; 244 245 upg_gio: gpio@406700 { 246 compatible = "brcm,brcmstb-gpio"; 247 reg = <0x406700 0x60>; 248 #gpio-cells = <2>; 249 #interrupt-cells = <2>; 250 gpio-controller; 251 interrupt-controller; 252 interrupt-parent = <&upg_irq0_intc>; 253 interrupts = <6>; 254 brcm,gpio-bank-widths = <32 32 16>; 255 }; 256 257 upg_gio_aon: gpio@408c00 { 258 compatible = "brcm,brcmstb-gpio"; 259 reg = <0x408c00 0x60>; 260 #gpio-cells = <2>; 261 #interrupt-cells = <2>; 262 gpio-controller; 263 interrupt-controller; 264 interrupt-parent = <&upg_aon_irq0_intc>; 265 interrupts = <6>; 266 interrupts-extended = <&upg_aon_irq0_intc 6>, 267 <&aon_pm_l2_intc 5>; 268 wakeup-source; 269 brcm,gpio-bank-widths = <27 32 2>; 270 }; 271 272 enet0: ethernet@430000 { 273 phy-mode = "internal"; 274 phy-handle = <&phy1>; 275 mac-address = [ 00 10 18 36 23 1a ]; 276 compatible = "brcm,genet-v2"; 277 #address-cells = <0x1>; 278 #size-cells = <0x1>; 279 reg = <0x430000 0x4c8c>; 280 interrupts = <24>, <25>; 281 interrupt-parent = <&periph_intc>; 282 status = "disabled"; 283 284 mdio@e14 { 285 compatible = "brcm,genet-mdio-v2"; 286 #address-cells = <0x1>; 287 #size-cells = <0x0>; 288 reg = <0xe14 0x8>; 289 290 phy1: ethernet-phy@1 { 291 max-speed = <100>; 292 reg = <0x1>; 293 compatible = "brcm,40nm-ephy", 294 "ethernet-phy-ieee802.3-c22"; 295 }; 296 }; 297 }; 298 299 ehci0: usb@480300 { 300 compatible = "brcm,bcm7346-ehci", "generic-ehci"; 301 reg = <0x480300 0x100>; 302 native-endian; 303 interrupt-parent = <&periph_intc>; 304 interrupts = <68>; 305 status = "disabled"; 306 }; 307 308 ohci0: usb@480400 { 309 compatible = "brcm,bcm7346-ohci", "generic-ohci"; 310 reg = <0x480400 0x100>; 311 native-endian; 312 no-big-frame-no; 313 interrupt-parent = <&periph_intc>; 314 interrupts = <70>; 315 status = "disabled"; 316 }; 317 318 ehci1: usb@480500 { 319 compatible = "brcm,bcm7346-ehci", "generic-ehci"; 320 reg = <0x480500 0x100>; 321 native-endian; 322 interrupt-parent = <&periph_intc>; 323 interrupts = <69>; 324 status = "disabled"; 325 }; 326 327 ohci1: usb@480600 { 328 compatible = "brcm,bcm7346-ohci", "generic-ohci"; 329 reg = <0x480600 0x100>; 330 native-endian; 331 no-big-frame-no; 332 interrupt-parent = <&periph_intc>; 333 interrupts = <71>; 334 status = "disabled"; 335 }; 336 337 ehci2: usb@490300 { 338 compatible = "brcm,bcm7346-ehci", "generic-ehci"; 339 reg = <0x490300 0x100>; 340 native-endian; 341 interrupt-parent = <&periph_intc>; 342 interrupts = <73>; 343 status = "disabled"; 344 }; 345 346 ohci2: usb@490400 { 347 compatible = "brcm,bcm7346-ohci", "generic-ohci"; 348 reg = <0x490400 0x100>; 349 native-endian; 350 no-big-frame-no; 351 interrupt-parent = <&periph_intc>; 352 interrupts = <75>; 353 status = "disabled"; 354 }; 355 356 ehci3: usb@490500 { 357 compatible = "brcm,bcm7346-ehci", "generic-ehci"; 358 reg = <0x490500 0x100>; 359 native-endian; 360 interrupt-parent = <&periph_intc>; 361 interrupts = <74>; 362 status = "disabled"; 363 }; 364 365 ohci3: usb@490600 { 366 compatible = "brcm,bcm7346-ohci", "generic-ohci"; 367 reg = <0x490600 0x100>; 368 native-endian; 369 no-big-frame-no; 370 interrupt-parent = <&periph_intc>; 371 interrupts = <76>; 372 status = "disabled"; 373 }; 374 375 hif_l2_intc: interrupt-controller@411000 { 376 compatible = "brcm,l2-intc"; 377 reg = <0x411000 0x30>; 378 interrupt-controller; 379 #interrupt-cells = <1>; 380 interrupt-parent = <&periph_intc>; 381 interrupts = <30>; 382 }; 383 384 nand: nand@412800 { 385 compatible = "brcm,brcmnand-v5.0", "brcm,brcmnand"; 386 #address-cells = <1>; 387 #size-cells = <0>; 388 reg-names = "nand"; 389 reg = <0x412800 0x400>; 390 interrupt-parent = <&hif_l2_intc>; 391 interrupts = <24>; 392 status = "disabled"; 393 }; 394 395 sata: sata@181000 { 396 compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; 397 reg-names = "ahci", "top-ctrl"; 398 reg = <0x181000 0xa9c>, <0x180020 0x1c>; 399 interrupt-parent = <&periph_intc>; 400 interrupts = <40>; 401 #address-cells = <1>; 402 #size-cells = <0>; 403 status = "disabled"; 404 405 sata0: sata-port@0 { 406 reg = <0>; 407 phys = <&sata_phy0>; 408 }; 409 410 sata1: sata-port@1 { 411 reg = <1>; 412 phys = <&sata_phy1>; 413 }; 414 }; 415 416 sata_phy: sata-phy@180100 { 417 compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; 418 reg = <0x180100 0x0eff>; 419 reg-names = "phy"; 420 #address-cells = <1>; 421 #size-cells = <0>; 422 status = "disabled"; 423 424 sata_phy0: sata-phy@0 { 425 reg = <0>; 426 #phy-cells = <0>; 427 }; 428 429 sata_phy1: sata-phy@1 { 430 reg = <1>; 431 #phy-cells = <0>; 432 }; 433 }; 434 435 sdhci0: sdhci@413500 { 436 compatible = "brcm,bcm7425-sdhci"; 437 reg = <0x413500 0x100>; 438 interrupt-parent = <&periph_intc>; 439 interrupts = <85>; 440 status = "disabled"; 441 }; 442 }; 443}; 444