xref: /openbmc/linux/arch/mips/boot/dts/brcm/bcm7346.dtsi (revision 4f3db074)
1/ {
2	#address-cells = <1>;
3	#size-cells = <1>;
4	compatible = "brcm,bcm7346";
5
6	cpus {
7		#address-cells = <1>;
8		#size-cells = <0>;
9
10		mips-hpt-frequency = <163125000>;
11
12		cpu@0 {
13			compatible = "brcm,bmips5000";
14			device_type = "cpu";
15			reg = <0>;
16		};
17
18		cpu@1 {
19			compatible = "brcm,bmips5000";
20			device_type = "cpu";
21			reg = <1>;
22		};
23	};
24
25	aliases {
26		uart0 = &uart0;
27	};
28
29	cpu_intc: cpu_intc {
30		#address-cells = <0>;
31		compatible = "mti,cpu-interrupt-controller";
32
33		interrupt-controller;
34		#interrupt-cells = <1>;
35	};
36
37	clocks {
38		uart_clk: uart_clk {
39			compatible = "fixed-clock";
40			#clock-cells = <0>;
41			clock-frequency = <81000000>;
42		};
43	};
44
45	rdb {
46		#address-cells = <1>;
47		#size-cells = <1>;
48
49		compatible = "simple-bus";
50		ranges = <0 0x10000000 0x01000000>;
51
52		periph_intc: periph_intc@411400 {
53			compatible = "brcm,bcm7038-l1-intc";
54			reg = <0x411400 0x30>, <0x411600 0x30>;
55
56			interrupt-controller;
57			#interrupt-cells = <1>;
58
59			interrupt-parent = <&cpu_intc>;
60			interrupts = <2>, <3>;
61		};
62
63		sun_l2_intc: sun_l2_intc@403000 {
64			compatible = "brcm,l2-intc";
65			reg = <0x403000 0x30>;
66			interrupt-controller;
67			#interrupt-cells = <1>;
68			interrupt-parent = <&periph_intc>;
69			interrupts = <51>;
70		};
71
72		gisb-arb@400000 {
73			compatible = "brcm,bcm7400-gisb-arb";
74			reg = <0x400000 0xdc>;
75			native-endian;
76			interrupt-parent = <&sun_l2_intc>;
77			interrupts = <0>, <2>;
78			brcm,gisb-arb-master-mask = <0x673>;
79			brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
80						     "rdc_0", "raaga_0",
81						     "jtag_0", "svd_0";
82		};
83
84		upg_irq0_intc: upg_irq0_intc@406780 {
85			compatible = "brcm,bcm7120-l2-intc";
86			reg = <0x406780 0x8>;
87
88			brcm,int-map-mask = <0x44>;
89			brcm,int-fwd-mask = <0x70000>;
90
91			interrupt-controller;
92			#interrupt-cells = <1>;
93
94			interrupt-parent = <&periph_intc>;
95			interrupts = <59>;
96		};
97
98		sun_top_ctrl: syscon@404000 {
99			compatible = "brcm,bcm7346-sun-top-ctrl", "syscon";
100			reg = <0x404000 0x51c>;
101			little-endian;
102		};
103
104		reboot {
105			compatible = "brcm,brcmstb-reboot";
106			syscon = <&sun_top_ctrl 0x304 0x308>;
107		};
108
109		uart0: serial@406900 {
110			compatible = "ns16550a";
111			reg = <0x406900 0x20>;
112			reg-io-width = <0x4>;
113			reg-shift = <0x2>;
114			native-endian;
115			interrupt-parent = <&periph_intc>;
116			interrupts = <64>;
117			clocks = <&uart_clk>;
118			status = "disabled";
119		};
120
121		enet0: ethernet@430000 {
122			phy-mode = "internal";
123			phy-handle = <&phy1>;
124			mac-address = [ 00 10 18 36 23 1a ];
125			compatible = "brcm,genet-v2";
126			#address-cells = <0x1>;
127			#size-cells = <0x1>;
128			reg = <0x430000 0x4c8c>;
129			interrupts = <24>, <25>;
130			interrupt-parent = <&periph_intc>;
131			status = "disabled";
132
133			mdio@e14 {
134				compatible = "brcm,genet-mdio-v2";
135				#address-cells = <0x1>;
136				#size-cells = <0x0>;
137				reg = <0xe14 0x8>;
138
139				phy1: ethernet-phy@1 {
140					max-speed = <100>;
141					reg = <0x1>;
142					compatible = "brcm,40nm-ephy",
143						"ethernet-phy-ieee802.3-c22";
144				};
145			};
146		};
147
148		ehci0: usb@480300 {
149			compatible = "brcm,bcm7346-ehci", "generic-ehci";
150			reg = <0x480300 0x100>;
151			native-endian;
152			interrupt-parent = <&periph_intc>;
153			interrupts = <68>;
154			status = "disabled";
155		};
156
157		ohci0: usb@480400 {
158			compatible = "brcm,bcm7346-ohci", "generic-ohci";
159			reg = <0x480400 0x100>;
160			native-endian;
161			no-big-frame-no;
162			interrupt-parent = <&periph_intc>;
163			interrupts = <70>;
164			status = "disabled";
165		};
166
167		ehci1: usb@480500 {
168			compatible = "brcm,bcm7346-ehci", "generic-ehci";
169			reg = <0x480500 0x100>;
170			native-endian;
171			interrupt-parent = <&periph_intc>;
172			interrupts = <69>;
173			status = "disabled";
174		};
175
176		ohci1: usb@480600 {
177			compatible = "brcm,bcm7346-ohci", "generic-ohci";
178			reg = <0x480600 0x100>;
179			native-endian;
180			no-big-frame-no;
181			interrupt-parent = <&periph_intc>;
182			interrupts = <71>;
183			status = "disabled";
184		};
185
186		ehci2: usb@490300 {
187			compatible = "brcm,bcm7346-ehci", "generic-ehci";
188			reg = <0x490300 0x100>;
189			native-endian;
190			interrupt-parent = <&periph_intc>;
191			interrupts = <73>;
192			status = "disabled";
193		};
194
195		ohci2: usb@490400 {
196			compatible = "brcm,bcm7346-ohci", "generic-ohci";
197			reg = <0x490400 0x100>;
198			native-endian;
199			no-big-frame-no;
200			interrupt-parent = <&periph_intc>;
201			interrupts = <75>;
202			status = "disabled";
203		};
204
205		ehci3: usb@490500 {
206			compatible = "brcm,bcm7346-ehci", "generic-ehci";
207			reg = <0x490500 0x100>;
208			native-endian;
209			interrupt-parent = <&periph_intc>;
210			interrupts = <74>;
211			status = "disabled";
212		};
213
214		ohci3: usb@490600 {
215			compatible = "brcm,bcm7346-ohci", "generic-ohci";
216			reg = <0x490600 0x100>;
217			native-endian;
218			no-big-frame-no;
219			interrupt-parent = <&periph_intc>;
220			interrupts = <76>;
221			status = "disabled";
222		};
223	};
224};
225