1// SPDX-License-Identifier: GPL-2.0 2/ { 3 #address-cells = <1>; 4 #size-cells = <1>; 5 compatible = "brcm,bcm6358"; 6 7 cpus { 8 #address-cells = <1>; 9 #size-cells = <0>; 10 11 mips-hpt-frequency = <150000000>; 12 13 cpu@0 { 14 compatible = "brcm,bmips4350"; 15 device_type = "cpu"; 16 reg = <0>; 17 }; 18 19 cpu@1 { 20 compatible = "brcm,bmips4350"; 21 device_type = "cpu"; 22 reg = <1>; 23 }; 24 }; 25 26 clocks { 27 periph_clk: periph-clk { 28 compatible = "fixed-clock"; 29 #clock-cells = <0>; 30 clock-frequency = <50000000>; 31 }; 32 }; 33 34 aliases { 35 serial0 = &uart0; 36 serial1 = &uart1; 37 }; 38 39 cpu_intc: interrupt-controller { 40 #address-cells = <0>; 41 compatible = "mti,cpu-interrupt-controller"; 42 43 interrupt-controller; 44 #interrupt-cells = <1>; 45 }; 46 47 ubus { 48 #address-cells = <1>; 49 #size-cells = <1>; 50 51 compatible = "simple-bus"; 52 ranges; 53 54 clkctl: clock-controller@fffe0004 { 55 compatible = "brcm,bcm6358-clocks"; 56 reg = <0xfffe0004 0x4>; 57 #clock-cells = <1>; 58 }; 59 60 periph_cntl: syscon@fffe0008 { 61 compatible = "syscon"; 62 reg = <0xfffe0000 0x4>; 63 native-endian; 64 }; 65 66 reboot: syscon-reboot@fffe0008 { 67 compatible = "syscon-reboot"; 68 regmap = <&periph_cntl>; 69 offset = <0x0>; 70 mask = <0x1>; 71 }; 72 73 periph_intc: interrupt-controller@fffe000c { 74 compatible = "brcm,bcm6345-l1-intc"; 75 reg = <0xfffe000c 0x8>, 76 <0xfffe0038 0x8>; 77 78 interrupt-controller; 79 #interrupt-cells = <1>; 80 81 interrupt-parent = <&cpu_intc>; 82 interrupts = <2>, <3>; 83 }; 84 85 periph_rst: reset-controller@fffe0034 { 86 compatible = "brcm,bcm6345-reset"; 87 reg = <0xfffe0034 0x4>; 88 #reset-cells = <1>; 89 }; 90 91 leds0: led-controller@fffe00d0 { 92 #address-cells = <1>; 93 #size-cells = <0>; 94 compatible = "brcm,bcm6358-leds"; 95 reg = <0xfffe00d0 0x8>; 96 97 status = "disabled"; 98 }; 99 100 uart0: serial@fffe0100 { 101 compatible = "brcm,bcm6345-uart"; 102 reg = <0xfffe0100 0x18>; 103 104 interrupt-parent = <&periph_intc>; 105 interrupts = <2>; 106 107 clocks = <&periph_clk>; 108 clock-names = "refclk"; 109 110 status = "disabled"; 111 }; 112 113 uart1: serial@fffe0120 { 114 compatible = "brcm,bcm6345-uart"; 115 reg = <0xfffe0120 0x18>; 116 117 interrupt-parent = <&periph_intc>; 118 interrupts = <3>; 119 120 clocks = <&periph_clk>; 121 clock-names = "refclk"; 122 123 status = "disabled"; 124 }; 125 126 ehci: usb@fffe1300 { 127 compatible = "brcm,bcm6358-ehci", "generic-ehci"; 128 reg = <0xfffe1300 0x100>; 129 big-endian; 130 interrupt-parent = <&periph_intc>; 131 interrupts = <10>; 132 status = "disabled"; 133 }; 134 135 ohci: usb@fffe1400 { 136 compatible = "brcm,bcm6358-ohci", "generic-ohci"; 137 reg = <0xfffe1400 0x100>; 138 big-endian; 139 no-big-frame-no; 140 interrupt-parent = <&periph_intc>; 141 interrupts = <5>; 142 status = "disabled"; 143 }; 144 }; 145}; 146