1// SPDX-License-Identifier: GPL-2.0 2 3#include "dt-bindings/clock/bcm6358-clock.h" 4#include "dt-bindings/reset/bcm6358-reset.h" 5 6/ { 7 #address-cells = <1>; 8 #size-cells = <1>; 9 compatible = "brcm,bcm6358"; 10 11 cpus { 12 #address-cells = <1>; 13 #size-cells = <0>; 14 15 mips-hpt-frequency = <150000000>; 16 17 cpu@0 { 18 compatible = "brcm,bmips4350"; 19 device_type = "cpu"; 20 reg = <0>; 21 }; 22 23 cpu@1 { 24 compatible = "brcm,bmips4350"; 25 device_type = "cpu"; 26 reg = <1>; 27 }; 28 }; 29 30 clocks { 31 periph_osc: periph-osc { 32 compatible = "fixed-clock"; 33 #clock-cells = <0>; 34 clock-frequency = <50000000>; 35 clock-output-names = "periph"; 36 }; 37 }; 38 39 aliases { 40 pflash = &pflash; 41 serial0 = &uart0; 42 serial1 = &uart1; 43 spi0 = &lsspi; 44 }; 45 46 cpu_intc: interrupt-controller { 47 #address-cells = <0>; 48 compatible = "mti,cpu-interrupt-controller"; 49 50 interrupt-controller; 51 #interrupt-cells = <1>; 52 }; 53 54 ubus { 55 #address-cells = <1>; 56 #size-cells = <1>; 57 58 compatible = "simple-bus"; 59 ranges; 60 61 periph_clk: clock-controller@fffe0004 { 62 compatible = "brcm,bcm6358-clocks"; 63 reg = <0xfffe0004 0x4>; 64 #clock-cells = <1>; 65 }; 66 67 pll_cntl: syscon@fffe0008 { 68 compatible = "syscon"; 69 reg = <0xfffe0008 0x4>; 70 native-endian; 71 72 reboot { 73 compatible = "syscon-reboot"; 74 offset = <0x0>; 75 mask = <0x1>; 76 }; 77 }; 78 79 periph_intc: interrupt-controller@fffe000c { 80 compatible = "brcm,bcm6345-l1-intc"; 81 reg = <0xfffe000c 0x8>, 82 <0xfffe0038 0x8>; 83 84 interrupt-controller; 85 #interrupt-cells = <1>; 86 87 interrupt-parent = <&cpu_intc>; 88 interrupts = <2>, <3>; 89 }; 90 91 periph_rst: reset-controller@fffe0034 { 92 compatible = "brcm,bcm6345-reset"; 93 reg = <0xfffe0034 0x4>; 94 #reset-cells = <1>; 95 }; 96 97 wdt: watchdog@fffe005c { 98 compatible = "brcm,bcm7038-wdt"; 99 reg = <0xfffe005c 0xc>; 100 101 clocks = <&periph_osc>; 102 clock-names = "refclk"; 103 104 timeout-sec = <30>; 105 }; 106 107 leds0: led-controller@fffe00d0 { 108 #address-cells = <1>; 109 #size-cells = <0>; 110 compatible = "brcm,bcm6358-leds"; 111 reg = <0xfffe00d0 0x8>; 112 113 status = "disabled"; 114 }; 115 116 uart0: serial@fffe0100 { 117 compatible = "brcm,bcm6345-uart"; 118 reg = <0xfffe0100 0x18>; 119 120 interrupt-parent = <&periph_intc>; 121 interrupts = <2>; 122 123 clocks = <&periph_osc>; 124 clock-names = "refclk"; 125 126 status = "disabled"; 127 }; 128 129 uart1: serial@fffe0120 { 130 compatible = "brcm,bcm6345-uart"; 131 reg = <0xfffe0120 0x18>; 132 133 interrupt-parent = <&periph_intc>; 134 interrupts = <3>; 135 136 clocks = <&periph_osc>; 137 clock-names = "refclk"; 138 139 status = "disabled"; 140 }; 141 142 lsspi: spi@fffe0800 { 143 #address-cells = <1>; 144 #size-cells = <0>; 145 compatible = "brcm,bcm6358-spi"; 146 reg = <0xfffe0800 0x70c>; 147 148 interrupt-parent = <&periph_intc>; 149 interrupts = <1>; 150 151 clocks = <&periph_clk BCM6358_CLK_SPI>; 152 clock-names = "spi"; 153 154 resets = <&periph_rst BCM6358_RST_SPI>; 155 reset-names = "spi"; 156 157 status = "disabled"; 158 }; 159 160 ehci: usb@fffe1300 { 161 compatible = "brcm,bcm6358-ehci", "generic-ehci"; 162 reg = <0xfffe1300 0x100>; 163 big-endian; 164 165 interrupt-parent = <&periph_intc>; 166 interrupts = <10>; 167 168 phys = <&usbh 0>; 169 phy-names = "usb"; 170 171 status = "disabled"; 172 }; 173 174 ohci: usb@fffe1400 { 175 compatible = "brcm,bcm6358-ohci", "generic-ohci"; 176 reg = <0xfffe1400 0x100>; 177 big-endian; 178 no-big-frame-no; 179 180 interrupt-parent = <&periph_intc>; 181 interrupts = <5>; 182 183 phys = <&usbh 0>; 184 phy-names = "usb"; 185 186 status = "disabled"; 187 }; 188 189 usbh: usb-phy@fffe1500 { 190 compatible = "brcm,bcm6358-usbh-phy"; 191 reg = <0xfffe1500 0x38>; 192 #phy-cells = <1>; 193 194 resets = <&periph_rst BCM6358_RST_USBH>; 195 reset-names = "usbh"; 196 197 status = "disabled"; 198 }; 199 }; 200 201 pflash: nor@1e000000 { 202 #address-cells = <1>; 203 #size-cells = <1>; 204 compatible = "cfi-flash"; 205 reg = <0x1e000000 0x2000000>; 206 bank-width = <2>; 207 208 status = "disabled"; 209 }; 210}; 211