1 /* 2 * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org> 3 * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> 4 * Copyright (C) 2006 Michael Buesch <m@bues.ch> 5 * Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org> 6 * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de> 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of the GNU General Public License as published by the 10 * Free Software Foundation; either version 2 of the License, or (at your 11 * option) any later version. 12 * 13 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED 14 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 15 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN 16 * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 17 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 18 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF 19 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON 20 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 21 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 22 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 23 * 24 * You should have received a copy of the GNU General Public License along 25 * with this program; if not, write to the Free Software Foundation, Inc., 26 * 675 Mass Ave, Cambridge, MA 02139, USA. 27 */ 28 29 #include "bcm47xx_private.h" 30 31 #include <linux/bcm47xx_sprom.h> 32 #include <linux/export.h> 33 #include <linux/types.h> 34 #include <linux/ethtool.h> 35 #include <linux/phy.h> 36 #include <linux/phy_fixed.h> 37 #include <linux/ssb/ssb.h> 38 #include <linux/ssb/ssb_embedded.h> 39 #include <linux/bcma/bcma_soc.h> 40 #include <asm/bootinfo.h> 41 #include <asm/idle.h> 42 #include <asm/prom.h> 43 #include <asm/reboot.h> 44 #include <asm/time.h> 45 #include <bcm47xx.h> 46 #include <bcm47xx_board.h> 47 48 union bcm47xx_bus bcm47xx_bus; 49 EXPORT_SYMBOL(bcm47xx_bus); 50 51 enum bcm47xx_bus_type bcm47xx_bus_type; 52 EXPORT_SYMBOL(bcm47xx_bus_type); 53 54 static void bcm47xx_machine_restart(char *command) 55 { 56 pr_alert("Please stand by while rebooting the system...\n"); 57 local_irq_disable(); 58 /* Set the watchdog timer to reset immediately */ 59 switch (bcm47xx_bus_type) { 60 #ifdef CONFIG_BCM47XX_SSB 61 case BCM47XX_BUS_TYPE_SSB: 62 if (bcm47xx_bus.ssb.chip_id == 0x4785) 63 write_c0_diag4(1 << 22); 64 ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1); 65 if (bcm47xx_bus.ssb.chip_id == 0x4785) { 66 __asm__ __volatile__( 67 ".set\tmips3\n\t" 68 "sync\n\t" 69 "wait\n\t" 70 ".set\tmips0"); 71 } 72 break; 73 #endif 74 #ifdef CONFIG_BCM47XX_BCMA 75 case BCM47XX_BUS_TYPE_BCMA: 76 bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1); 77 break; 78 #endif 79 } 80 while (1) 81 cpu_relax(); 82 } 83 84 static void bcm47xx_machine_halt(void) 85 { 86 /* Disable interrupts and watchdog and spin forever */ 87 local_irq_disable(); 88 switch (bcm47xx_bus_type) { 89 #ifdef CONFIG_BCM47XX_SSB 90 case BCM47XX_BUS_TYPE_SSB: 91 ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0); 92 break; 93 #endif 94 #ifdef CONFIG_BCM47XX_BCMA 95 case BCM47XX_BUS_TYPE_BCMA: 96 bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0); 97 break; 98 #endif 99 } 100 while (1) 101 cpu_relax(); 102 } 103 104 #ifdef CONFIG_BCM47XX_SSB 105 static void __init bcm47xx_register_ssb(void) 106 { 107 int err; 108 char buf[100]; 109 struct ssb_mipscore *mcore; 110 111 err = ssb_bus_host_soc_register(&bcm47xx_bus.ssb, SSB_ENUM_BASE); 112 if (err) 113 panic("Failed to initialize SSB bus (err %d)", err); 114 115 mcore = &bcm47xx_bus.ssb.mipscore; 116 if (bcm47xx_nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) { 117 if (strstr(buf, "console=ttyS1")) { 118 struct ssb_serial_port port; 119 120 pr_debug("Swapping serial ports!\n"); 121 /* swap serial ports */ 122 memcpy(&port, &mcore->serial_ports[0], sizeof(port)); 123 memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], 124 sizeof(port)); 125 memcpy(&mcore->serial_ports[1], &port, sizeof(port)); 126 } 127 } 128 } 129 #endif 130 131 #ifdef CONFIG_BCM47XX_BCMA 132 static void __init bcm47xx_register_bcma(void) 133 { 134 int err; 135 136 err = bcma_host_soc_register(&bcm47xx_bus.bcma); 137 if (err) 138 panic("Failed to register BCMA bus (err %d)", err); 139 } 140 #endif 141 142 /* 143 * Memory setup is done in the early part of MIPS's arch_mem_init. It's supposed 144 * to detect memory and record it with add_memory_region. 145 * Any extra initializaion performed here must not use kmalloc or bootmem. 146 */ 147 void __init plat_mem_setup(void) 148 { 149 struct cpuinfo_mips *c = ¤t_cpu_data; 150 151 if ((c->cputype == CPU_74K) || (c->cputype == CPU_1074K)) { 152 pr_info("Using bcma bus\n"); 153 #ifdef CONFIG_BCM47XX_BCMA 154 bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA; 155 bcm47xx_register_bcma(); 156 bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id); 157 #ifdef CONFIG_HIGHMEM 158 bcm47xx_prom_highmem_init(); 159 #endif 160 #endif 161 } else { 162 pr_info("Using ssb bus\n"); 163 #ifdef CONFIG_BCM47XX_SSB 164 bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB; 165 bcm47xx_sprom_register_fallbacks(); 166 bcm47xx_register_ssb(); 167 bcm47xx_set_system_type(bcm47xx_bus.ssb.chip_id); 168 #endif 169 } 170 171 _machine_restart = bcm47xx_machine_restart; 172 _machine_halt = bcm47xx_machine_halt; 173 pm_power_off = bcm47xx_machine_halt; 174 } 175 176 #ifdef CONFIG_BCM47XX_BCMA 177 static struct device * __init bcm47xx_setup_device(void) 178 { 179 struct device *dev; 180 int err; 181 182 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 183 if (!dev) 184 return NULL; 185 186 err = dev_set_name(dev, "bcm47xx_soc"); 187 if (err) { 188 pr_err("Failed to set SoC device name: %d\n", err); 189 kfree(dev); 190 return NULL; 191 } 192 193 err = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); 194 if (err) 195 pr_err("Failed to set SoC DMA mask: %d\n", err); 196 197 return dev; 198 } 199 #endif 200 201 /* 202 * This finishes bus initialization doing things that were not possible without 203 * kmalloc. Make sure to call it late enough (after mm_init). 204 */ 205 void __init bcm47xx_bus_setup(void) 206 { 207 #ifdef CONFIG_BCM47XX_BCMA 208 if (bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA) { 209 int err; 210 211 bcm47xx_bus.bcma.dev = bcm47xx_setup_device(); 212 if (!bcm47xx_bus.bcma.dev) 213 panic("Failed to setup SoC device\n"); 214 215 err = bcma_host_soc_init(&bcm47xx_bus.bcma); 216 if (err) 217 panic("Failed to initialize BCMA bus (err %d)", err); 218 } 219 #endif 220 221 /* With bus initialized we can access NVRAM and detect the board */ 222 bcm47xx_board_detect(); 223 mips_set_machine_name(bcm47xx_board_get_name()); 224 } 225 226 static int __init bcm47xx_cpu_fixes(void) 227 { 228 switch (bcm47xx_bus_type) { 229 #ifdef CONFIG_BCM47XX_SSB 230 case BCM47XX_BUS_TYPE_SSB: 231 /* Nothing to do */ 232 break; 233 #endif 234 #ifdef CONFIG_BCM47XX_BCMA 235 case BCM47XX_BUS_TYPE_BCMA: 236 /* The BCM4706 has a problem with the CPU wait instruction. 237 * When r4k_wait or r4k_wait_irqoff is used will just hang and 238 * not return from a msleep(). Removing the cpu_wait 239 * functionality is a workaround for this problem. The BCM4716 240 * does not have this problem. 241 */ 242 if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706) 243 cpu_wait = NULL; 244 break; 245 #endif 246 } 247 return 0; 248 } 249 arch_initcall(bcm47xx_cpu_fixes); 250 251 static struct fixed_phy_status bcm47xx_fixed_phy_status __initdata = { 252 .link = 1, 253 .speed = SPEED_100, 254 .duplex = DUPLEX_FULL, 255 }; 256 257 static int __init bcm47xx_register_bus_complete(void) 258 { 259 switch (bcm47xx_bus_type) { 260 #ifdef CONFIG_BCM47XX_SSB 261 case BCM47XX_BUS_TYPE_SSB: 262 /* Nothing to do */ 263 break; 264 #endif 265 #ifdef CONFIG_BCM47XX_BCMA 266 case BCM47XX_BUS_TYPE_BCMA: 267 if (device_register(bcm47xx_bus.bcma.dev)) 268 pr_err("Failed to register SoC device\n"); 269 bcma_bus_register(&bcm47xx_bus.bcma.bus); 270 break; 271 #endif 272 } 273 bcm47xx_buttons_register(); 274 bcm47xx_leds_register(); 275 bcm47xx_workarounds(); 276 277 fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status); 278 return 0; 279 } 280 device_initcall(bcm47xx_register_bus_complete); 281