xref: /openbmc/linux/arch/mips/bcm47xx/setup.c (revision 930beb5a)
1 /*
2  *  Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
3  *  Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
4  *  Copyright (C) 2006 Michael Buesch <m@bues.ch>
5  *  Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
6  *  Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
7  *
8  *  This program is free software; you can redistribute  it and/or modify it
9  *  under  the terms of  the GNU General  Public License as published by the
10  *  Free Software Foundation;  either version 2 of the  License, or (at your
11  *  option) any later version.
12  *
13  *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
14  *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
15  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
16  *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
17  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18  *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
19  *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
20  *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
21  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23  *
24  *  You should have received a copy of the  GNU General Public License along
25  *  with this program; if not, write  to the Free Software Foundation, Inc.,
26  *  675 Mass Ave, Cambridge, MA 02139, USA.
27  */
28 
29 #include "bcm47xx_private.h"
30 
31 #include <linux/export.h>
32 #include <linux/types.h>
33 #include <linux/ssb/ssb.h>
34 #include <linux/ssb/ssb_embedded.h>
35 #include <linux/bcma/bcma_soc.h>
36 #include <asm/bootinfo.h>
37 #include <asm/idle.h>
38 #include <asm/prom.h>
39 #include <asm/reboot.h>
40 #include <asm/time.h>
41 #include <bcm47xx.h>
42 #include <bcm47xx_nvram.h>
43 #include <bcm47xx_board.h>
44 
45 union bcm47xx_bus bcm47xx_bus;
46 EXPORT_SYMBOL(bcm47xx_bus);
47 
48 enum bcm47xx_bus_type bcm47xx_bus_type;
49 EXPORT_SYMBOL(bcm47xx_bus_type);
50 
51 static void bcm47xx_machine_restart(char *command)
52 {
53 	printk(KERN_ALERT "Please stand by while rebooting the system...\n");
54 	local_irq_disable();
55 	/* Set the watchdog timer to reset immediately */
56 	switch (bcm47xx_bus_type) {
57 #ifdef CONFIG_BCM47XX_SSB
58 	case BCM47XX_BUS_TYPE_SSB:
59 		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 1);
60 		break;
61 #endif
62 #ifdef CONFIG_BCM47XX_BCMA
63 	case BCM47XX_BUS_TYPE_BCMA:
64 		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 1);
65 		break;
66 #endif
67 	}
68 	while (1)
69 		cpu_relax();
70 }
71 
72 static void bcm47xx_machine_halt(void)
73 {
74 	/* Disable interrupts and watchdog and spin forever */
75 	local_irq_disable();
76 	switch (bcm47xx_bus_type) {
77 #ifdef CONFIG_BCM47XX_SSB
78 	case BCM47XX_BUS_TYPE_SSB:
79 		ssb_watchdog_timer_set(&bcm47xx_bus.ssb, 0);
80 		break;
81 #endif
82 #ifdef CONFIG_BCM47XX_BCMA
83 	case BCM47XX_BUS_TYPE_BCMA:
84 		bcma_chipco_watchdog_timer_set(&bcm47xx_bus.bcma.bus.drv_cc, 0);
85 		break;
86 #endif
87 	}
88 	while (1)
89 		cpu_relax();
90 }
91 
92 #ifdef CONFIG_BCM47XX_SSB
93 static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
94 {
95 	char prefix[10];
96 
97 	if (bus->bustype == SSB_BUSTYPE_PCI) {
98 		memset(out, 0, sizeof(struct ssb_sprom));
99 		snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
100 			 bus->host_pci->bus->number + 1,
101 			 PCI_SLOT(bus->host_pci->devfn));
102 		bcm47xx_fill_sprom(out, prefix, false);
103 		return 0;
104 	} else {
105 		printk(KERN_WARNING "bcm47xx: unable to fill SPROM for given bustype.\n");
106 		return -EINVAL;
107 	}
108 }
109 
110 static int bcm47xx_get_invariants(struct ssb_bus *bus,
111 				  struct ssb_init_invariants *iv)
112 {
113 	char buf[20];
114 
115 	/* Fill boardinfo structure */
116 	memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
117 
118 	bcm47xx_fill_ssb_boardinfo(&iv->boardinfo, NULL);
119 
120 	memset(&iv->sprom, 0, sizeof(struct ssb_sprom));
121 	bcm47xx_fill_sprom(&iv->sprom, NULL, false);
122 
123 	if (bcm47xx_nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
124 		iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
125 
126 	return 0;
127 }
128 
129 static void __init bcm47xx_register_ssb(void)
130 {
131 	int err;
132 	char buf[100];
133 	struct ssb_mipscore *mcore;
134 
135 	err = ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb);
136 	if (err)
137 		printk(KERN_WARNING "bcm47xx: someone else already registered"
138 			" a ssb SPROM callback handler (err %d)\n", err);
139 
140 	err = ssb_bus_ssbbus_register(&(bcm47xx_bus.ssb), SSB_ENUM_BASE,
141 				      bcm47xx_get_invariants);
142 	if (err)
143 		panic("Failed to initialize SSB bus (err %d)", err);
144 
145 	mcore = &bcm47xx_bus.ssb.mipscore;
146 	if (bcm47xx_nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
147 		if (strstr(buf, "console=ttyS1")) {
148 			struct ssb_serial_port port;
149 
150 			printk(KERN_DEBUG "Swapping serial ports!\n");
151 			/* swap serial ports */
152 			memcpy(&port, &mcore->serial_ports[0], sizeof(port));
153 			memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
154 			       sizeof(port));
155 			memcpy(&mcore->serial_ports[1], &port, sizeof(port));
156 		}
157 	}
158 }
159 #endif
160 
161 #ifdef CONFIG_BCM47XX_BCMA
162 static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
163 {
164 	char prefix[10];
165 	struct bcma_device *core;
166 
167 	switch (bus->hosttype) {
168 	case BCMA_HOSTTYPE_PCI:
169 		memset(out, 0, sizeof(struct ssb_sprom));
170 		snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
171 			 bus->host_pci->bus->number + 1,
172 			 PCI_SLOT(bus->host_pci->devfn));
173 		bcm47xx_fill_sprom(out, prefix, false);
174 		return 0;
175 	case BCMA_HOSTTYPE_SOC:
176 		memset(out, 0, sizeof(struct ssb_sprom));
177 		core = bcma_find_core(bus, BCMA_CORE_80211);
178 		if (core) {
179 			snprintf(prefix, sizeof(prefix), "sb/%u/",
180 				 core->core_index);
181 			bcm47xx_fill_sprom(out, prefix, true);
182 		} else {
183 			bcm47xx_fill_sprom(out, NULL, false);
184 		}
185 		return 0;
186 	default:
187 		pr_warn("bcm47xx: unable to fill SPROM for given bustype.\n");
188 		return -EINVAL;
189 	}
190 }
191 
192 static void __init bcm47xx_register_bcma(void)
193 {
194 	int err;
195 
196 	err = bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma);
197 	if (err)
198 		pr_warn("bcm47xx: someone else already registered a bcma SPROM callback handler (err %d)\n", err);
199 
200 	err = bcma_host_soc_register(&bcm47xx_bus.bcma);
201 	if (err)
202 		panic("Failed to initialize BCMA bus (err %d)", err);
203 
204 	bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL);
205 
206 	/* The BCM4706 has a problem with the CPU wait instruction.
207 	 * When r4k_wait or r4k_wait_irqoff is used will just hang and
208 	 * not return from a msleep(). Removing the cpu_wait
209 	 * functionality is a workaround for this problem. The BCM4716
210 	 * does not have this problem.
211 	 */
212 	if (bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4706)
213 		cpu_wait = NULL;
214 }
215 #endif
216 
217 void __init plat_mem_setup(void)
218 {
219 	struct cpuinfo_mips *c = &current_cpu_data;
220 
221 	if (c->cputype == CPU_74K) {
222 		printk(KERN_INFO "bcm47xx: using bcma bus\n");
223 #ifdef CONFIG_BCM47XX_BCMA
224 		bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
225 		bcm47xx_register_bcma();
226 		bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
227 #endif
228 	} else {
229 		printk(KERN_INFO "bcm47xx: using ssb bus\n");
230 #ifdef CONFIG_BCM47XX_SSB
231 		bcm47xx_bus_type = BCM47XX_BUS_TYPE_SSB;
232 		bcm47xx_register_ssb();
233 		bcm47xx_set_system_type(bcm47xx_bus.ssb.chip_id);
234 #endif
235 	}
236 
237 	_machine_restart = bcm47xx_machine_restart;
238 	_machine_halt = bcm47xx_machine_halt;
239 	pm_power_off = bcm47xx_machine_halt;
240 	bcm47xx_board_detect();
241 	mips_set_machine_name(bcm47xx_board_get_name());
242 }
243 
244 static int __init bcm47xx_register_bus_complete(void)
245 {
246 	switch (bcm47xx_bus_type) {
247 #ifdef CONFIG_BCM47XX_SSB
248 	case BCM47XX_BUS_TYPE_SSB:
249 		/* Nothing to do */
250 		break;
251 #endif
252 #ifdef CONFIG_BCM47XX_BCMA
253 	case BCM47XX_BUS_TYPE_BCMA:
254 		bcma_bus_register(&bcm47xx_bus.bcma.bus);
255 		break;
256 #endif
257 	}
258 	bcm47xx_buttons_register();
259 	bcm47xx_leds_register();
260 
261 	return 0;
262 }
263 device_initcall(bcm47xx_register_bus_complete);
264