1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * DBAu1200/PBAu1200 board platform device registration
4  *
5  * Copyright (C) 2008-2011 Manuel Lauss
6  */
7 
8 #include <linux/clk.h>
9 #include <linux/dma-mapping.h>
10 #include <linux/gpio.h>
11 #include <linux/i2c.h>
12 #include <linux/init.h>
13 #include <linux/interrupt.h>
14 #include <linux/io.h>
15 #include <linux/leds.h>
16 #include <linux/mmc/host.h>
17 #include <linux/mtd/mtd.h>
18 #include <linux/mtd/platnand.h>
19 #include <linux/platform_device.h>
20 #include <linux/serial_8250.h>
21 #include <linux/spi/spi.h>
22 #include <linux/spi/flash.h>
23 #include <linux/smc91x.h>
24 #include <linux/ata_platform.h>
25 #include <asm/mach-au1x00/au1000.h>
26 #include <asm/mach-au1x00/au1100_mmc.h>
27 #include <asm/mach-au1x00/au1xxx_dbdma.h>
28 #include <asm/mach-au1x00/au1xxx_psc.h>
29 #include <asm/mach-au1x00/au1200fb.h>
30 #include <asm/mach-au1x00/au1550_spi.h>
31 #include <asm/mach-db1x00/bcsr.h>
32 
33 #include "platform.h"
34 
35 #define BCSR_INT_IDE		0x0001
36 #define BCSR_INT_ETH		0x0002
37 #define BCSR_INT_PC0		0x0004
38 #define BCSR_INT_PC0STSCHG	0x0008
39 #define BCSR_INT_PC1		0x0010
40 #define BCSR_INT_PC1STSCHG	0x0020
41 #define BCSR_INT_DC		0x0040
42 #define BCSR_INT_FLASHBUSY	0x0080
43 #define BCSR_INT_PC0INSERT	0x0100
44 #define BCSR_INT_PC0EJECT	0x0200
45 #define BCSR_INT_PC1INSERT	0x0400
46 #define BCSR_INT_PC1EJECT	0x0800
47 #define BCSR_INT_SD0INSERT	0x1000
48 #define BCSR_INT_SD0EJECT	0x2000
49 #define BCSR_INT_SD1INSERT	0x4000
50 #define BCSR_INT_SD1EJECT	0x8000
51 
52 #define DB1200_IDE_PHYS_ADDR	0x18800000
53 #define DB1200_IDE_REG_SHIFT	5
54 #define DB1200_IDE_PHYS_LEN	(16 << DB1200_IDE_REG_SHIFT)
55 #define DB1200_ETH_PHYS_ADDR	0x19000300
56 #define DB1200_NAND_PHYS_ADDR	0x20000000
57 
58 #define PB1200_IDE_PHYS_ADDR	0x0C800000
59 #define PB1200_ETH_PHYS_ADDR	0x0D000300
60 #define PB1200_NAND_PHYS_ADDR	0x1C000000
61 
62 #define DB1200_INT_BEGIN	(AU1000_MAX_INTR + 1)
63 #define DB1200_IDE_INT		(DB1200_INT_BEGIN + 0)
64 #define DB1200_ETH_INT		(DB1200_INT_BEGIN + 1)
65 #define DB1200_PC0_INT		(DB1200_INT_BEGIN + 2)
66 #define DB1200_PC0_STSCHG_INT	(DB1200_INT_BEGIN + 3)
67 #define DB1200_PC1_INT		(DB1200_INT_BEGIN + 4)
68 #define DB1200_PC1_STSCHG_INT	(DB1200_INT_BEGIN + 5)
69 #define DB1200_DC_INT		(DB1200_INT_BEGIN + 6)
70 #define DB1200_FLASHBUSY_INT	(DB1200_INT_BEGIN + 7)
71 #define DB1200_PC0_INSERT_INT	(DB1200_INT_BEGIN + 8)
72 #define DB1200_PC0_EJECT_INT	(DB1200_INT_BEGIN + 9)
73 #define DB1200_PC1_INSERT_INT	(DB1200_INT_BEGIN + 10)
74 #define DB1200_PC1_EJECT_INT	(DB1200_INT_BEGIN + 11)
75 #define DB1200_SD0_INSERT_INT	(DB1200_INT_BEGIN + 12)
76 #define DB1200_SD0_EJECT_INT	(DB1200_INT_BEGIN + 13)
77 #define PB1200_SD1_INSERT_INT	(DB1200_INT_BEGIN + 14)
78 #define PB1200_SD1_EJECT_INT	(DB1200_INT_BEGIN + 15)
79 #define DB1200_INT_END		(DB1200_INT_BEGIN + 15)
80 
81 const char *get_system_type(void);
82 
83 static int __init db1200_detect_board(void)
84 {
85 	int bid;
86 
87 	/* try the DB1200 first */
88 	bcsr_init(DB1200_BCSR_PHYS_ADDR,
89 		  DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS);
90 	if (BCSR_WHOAMI_DB1200 == BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI))) {
91 		unsigned short t = bcsr_read(BCSR_HEXLEDS);
92 		bcsr_write(BCSR_HEXLEDS, ~t);
93 		if (bcsr_read(BCSR_HEXLEDS) != t) {
94 			bcsr_write(BCSR_HEXLEDS, t);
95 			return 0;
96 		}
97 	}
98 
99 	/* okay, try the PB1200 then */
100 	bcsr_init(PB1200_BCSR_PHYS_ADDR,
101 		  PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS);
102 	bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
103 	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
104 	    (bid == BCSR_WHOAMI_PB1200_DDR2)) {
105 		unsigned short t = bcsr_read(BCSR_HEXLEDS);
106 		bcsr_write(BCSR_HEXLEDS, ~t);
107 		if (bcsr_read(BCSR_HEXLEDS) != t) {
108 			bcsr_write(BCSR_HEXLEDS, t);
109 			return 0;
110 		}
111 	}
112 
113 	return 1;	/* it's neither */
114 }
115 
116 int __init db1200_board_setup(void)
117 {
118 	unsigned short whoami;
119 
120 	if (db1200_detect_board())
121 		return -ENODEV;
122 
123 	whoami = bcsr_read(BCSR_WHOAMI);
124 	switch (BCSR_WHOAMI_BOARD(whoami)) {
125 	case BCSR_WHOAMI_PB1200_DDR1:
126 	case BCSR_WHOAMI_PB1200_DDR2:
127 	case BCSR_WHOAMI_DB1200:
128 		break;
129 	default:
130 		return -ENODEV;
131 	}
132 
133 	printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d"
134 		"  Board-ID %d	Daughtercard ID %d\n", get_system_type(),
135 		(whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf);
136 
137 	return 0;
138 }
139 
140 /******************************************************************************/
141 
142 static u64 au1200_all_dmamask = DMA_BIT_MASK(32);
143 
144 static struct mtd_partition db1200_spiflash_parts[] = {
145 	{
146 		.name	= "spi_flash",
147 		.offset = 0,
148 		.size	= MTDPART_SIZ_FULL,
149 	},
150 };
151 
152 static struct flash_platform_data db1200_spiflash_data = {
153 	.name		= "s25fl001",
154 	.parts		= db1200_spiflash_parts,
155 	.nr_parts	= ARRAY_SIZE(db1200_spiflash_parts),
156 	.type		= "m25p10",
157 };
158 
159 static struct spi_board_info db1200_spi_devs[] __initdata = {
160 	{
161 		/* TI TMP121AIDBVR temp sensor */
162 		.modalias	= "tmp121",
163 		.max_speed_hz	= 2000000,
164 		.bus_num	= 0,
165 		.chip_select	= 0,
166 		.mode		= 0,
167 	},
168 	{
169 		/* Spansion S25FL001D0FMA SPI flash */
170 		.modalias	= "m25p80",
171 		.max_speed_hz	= 50000000,
172 		.bus_num	= 0,
173 		.chip_select	= 1,
174 		.mode		= 0,
175 		.platform_data	= &db1200_spiflash_data,
176 	},
177 };
178 
179 static struct i2c_board_info db1200_i2c_devs[] __initdata = {
180 	{ I2C_BOARD_INFO("24c04", 0x52),  }, /* AT24C04-10 I2C eeprom */
181 	{ I2C_BOARD_INFO("ne1619", 0x2d), }, /* adm1025-compat hwmon */
182 	{ I2C_BOARD_INFO("wm8731", 0x1b), }, /* I2S audio codec WM8731 */
183 };
184 
185 /**********************************************************************/
186 
187 static void au1200_nand_cmd_ctrl(struct nand_chip *this, int cmd,
188 				 unsigned int ctrl)
189 {
190 	unsigned long ioaddr = (unsigned long)this->legacy.IO_ADDR_W;
191 
192 	ioaddr &= 0xffffff00;
193 
194 	if (ctrl & NAND_CLE) {
195 		ioaddr += MEM_STNAND_CMD;
196 	} else if (ctrl & NAND_ALE) {
197 		ioaddr += MEM_STNAND_ADDR;
198 	} else {
199 		/* assume we want to r/w real data  by default */
200 		ioaddr += MEM_STNAND_DATA;
201 	}
202 	this->legacy.IO_ADDR_R = this->legacy.IO_ADDR_W = (void __iomem *)ioaddr;
203 	if (cmd != NAND_CMD_NONE) {
204 		__raw_writeb(cmd, this->legacy.IO_ADDR_W);
205 		wmb();
206 	}
207 }
208 
209 static int au1200_nand_device_ready(struct nand_chip *this)
210 {
211 	return alchemy_rdsmem(AU1000_MEM_STSTAT) & 1;
212 }
213 
214 static struct mtd_partition db1200_nand_parts[] = {
215 	{
216 		.name	= "NAND FS 0",
217 		.offset = 0,
218 		.size	= 8 * 1024 * 1024,
219 	},
220 	{
221 		.name	= "NAND FS 1",
222 		.offset = MTDPART_OFS_APPEND,
223 		.size	= MTDPART_SIZ_FULL
224 	},
225 };
226 
227 struct platform_nand_data db1200_nand_platdata = {
228 	.chip = {
229 		.nr_chips	= 1,
230 		.chip_offset	= 0,
231 		.nr_partitions	= ARRAY_SIZE(db1200_nand_parts),
232 		.partitions	= db1200_nand_parts,
233 		.chip_delay	= 20,
234 	},
235 	.ctrl = {
236 		.dev_ready	= au1200_nand_device_ready,
237 		.cmd_ctrl	= au1200_nand_cmd_ctrl,
238 	},
239 };
240 
241 static struct resource db1200_nand_res[] = {
242 	[0] = {
243 		.start	= DB1200_NAND_PHYS_ADDR,
244 		.end	= DB1200_NAND_PHYS_ADDR + 0xff,
245 		.flags	= IORESOURCE_MEM,
246 	},
247 };
248 
249 static struct platform_device db1200_nand_dev = {
250 	.name		= "gen_nand",
251 	.num_resources	= ARRAY_SIZE(db1200_nand_res),
252 	.resource	= db1200_nand_res,
253 	.id		= -1,
254 	.dev		= {
255 		.platform_data = &db1200_nand_platdata,
256 	}
257 };
258 
259 /**********************************************************************/
260 
261 static struct smc91x_platdata db1200_eth_data = {
262 	.flags	= SMC91X_NOWAIT | SMC91X_USE_16BIT,
263 	.leda	= RPC_LED_100_10,
264 	.ledb	= RPC_LED_TX_RX,
265 };
266 
267 static struct resource db1200_eth_res[] = {
268 	[0] = {
269 		.start	= DB1200_ETH_PHYS_ADDR,
270 		.end	= DB1200_ETH_PHYS_ADDR + 0xf,
271 		.flags	= IORESOURCE_MEM,
272 	},
273 	[1] = {
274 		.start	= DB1200_ETH_INT,
275 		.end	= DB1200_ETH_INT,
276 		.flags	= IORESOURCE_IRQ,
277 	},
278 };
279 
280 static struct platform_device db1200_eth_dev = {
281 	.dev	= {
282 		.platform_data	= &db1200_eth_data,
283 	},
284 	.name		= "smc91x",
285 	.id		= -1,
286 	.num_resources	= ARRAY_SIZE(db1200_eth_res),
287 	.resource	= db1200_eth_res,
288 };
289 
290 /**********************************************************************/
291 
292 static struct pata_platform_info db1200_ide_info = {
293 	.ioport_shift	= DB1200_IDE_REG_SHIFT,
294 };
295 
296 #define IDE_ALT_START	(14 << DB1200_IDE_REG_SHIFT)
297 static struct resource db1200_ide_res[] = {
298 	[0] = {
299 		.start	= DB1200_IDE_PHYS_ADDR,
300 		.end	= DB1200_IDE_PHYS_ADDR + IDE_ALT_START - 1,
301 		.flags	= IORESOURCE_MEM,
302 	},
303 	[1] = {
304 		.start	= DB1200_IDE_PHYS_ADDR + IDE_ALT_START,
305 		.end	= DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1,
306 		.flags	= IORESOURCE_MEM,
307 	},
308 	[2] = {
309 		.start	= DB1200_IDE_INT,
310 		.end	= DB1200_IDE_INT,
311 		.flags	= IORESOURCE_IRQ,
312 	},
313 };
314 
315 static struct platform_device db1200_ide_dev = {
316 	.name		= "pata_platform",
317 	.id		= 0,
318 	.dev = {
319 		.dma_mask		= &au1200_all_dmamask,
320 		.coherent_dma_mask	= DMA_BIT_MASK(32),
321 		.platform_data		= &db1200_ide_info,
322 	},
323 	.num_resources	= ARRAY_SIZE(db1200_ide_res),
324 	.resource	= db1200_ide_res,
325 };
326 
327 /**********************************************************************/
328 
329 #ifdef CONFIG_MMC_AU1X
330 /* SD carddetects:  they're supposed to be edge-triggered, but ack
331  * doesn't seem to work (CPLD Rev 2).  Instead, the screaming one
332  * is disabled and its counterpart enabled.  The 200ms timeout is
333  * because the carddetect usually triggers twice, after debounce.
334  */
335 static irqreturn_t db1200_mmc_cd(int irq, void *ptr)
336 {
337 	disable_irq_nosync(irq);
338 	return IRQ_WAKE_THREAD;
339 }
340 
341 static irqreturn_t db1200_mmc_cdfn(int irq, void *ptr)
342 {
343 	mmc_detect_change(ptr, msecs_to_jiffies(200));
344 
345 	msleep(100);	/* debounce */
346 	if (irq == DB1200_SD0_INSERT_INT)
347 		enable_irq(DB1200_SD0_EJECT_INT);
348 	else
349 		enable_irq(DB1200_SD0_INSERT_INT);
350 
351 	return IRQ_HANDLED;
352 }
353 
354 static int db1200_mmc_cd_setup(void *mmc_host, int en)
355 {
356 	int ret;
357 
358 	if (en) {
359 		ret = request_threaded_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd,
360 				db1200_mmc_cdfn, 0, "sd_insert", mmc_host);
361 		if (ret)
362 			goto out;
363 
364 		ret = request_threaded_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd,
365 				db1200_mmc_cdfn, 0, "sd_eject", mmc_host);
366 		if (ret) {
367 			free_irq(DB1200_SD0_INSERT_INT, mmc_host);
368 			goto out;
369 		}
370 
371 		if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT)
372 			enable_irq(DB1200_SD0_EJECT_INT);
373 		else
374 			enable_irq(DB1200_SD0_INSERT_INT);
375 
376 	} else {
377 		free_irq(DB1200_SD0_INSERT_INT, mmc_host);
378 		free_irq(DB1200_SD0_EJECT_INT, mmc_host);
379 	}
380 	ret = 0;
381 out:
382 	return ret;
383 }
384 
385 static void db1200_mmc_set_power(void *mmc_host, int state)
386 {
387 	if (state) {
388 		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR);
389 		msleep(400);	/* stabilization time */
390 	} else
391 		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0);
392 }
393 
394 static int db1200_mmc_card_readonly(void *mmc_host)
395 {
396 	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0;
397 }
398 
399 static int db1200_mmc_card_inserted(void *mmc_host)
400 {
401 	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0;
402 }
403 
404 static void db1200_mmcled_set(struct led_classdev *led,
405 			      enum led_brightness brightness)
406 {
407 	if (brightness != LED_OFF)
408 		bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0);
409 	else
410 		bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0);
411 }
412 
413 static struct led_classdev db1200_mmc_led = {
414 	.brightness_set = db1200_mmcled_set,
415 };
416 
417 /* -- */
418 
419 static irqreturn_t pb1200_mmc1_cd(int irq, void *ptr)
420 {
421 	disable_irq_nosync(irq);
422 	return IRQ_WAKE_THREAD;
423 }
424 
425 static irqreturn_t pb1200_mmc1_cdfn(int irq, void *ptr)
426 {
427 	mmc_detect_change(ptr, msecs_to_jiffies(200));
428 
429 	msleep(100);	/* debounce */
430 	if (irq == PB1200_SD1_INSERT_INT)
431 		enable_irq(PB1200_SD1_EJECT_INT);
432 	else
433 		enable_irq(PB1200_SD1_INSERT_INT);
434 
435 	return IRQ_HANDLED;
436 }
437 
438 static int pb1200_mmc1_cd_setup(void *mmc_host, int en)
439 {
440 	int ret;
441 
442 	if (en) {
443 		ret = request_threaded_irq(PB1200_SD1_INSERT_INT, pb1200_mmc1_cd,
444 				pb1200_mmc1_cdfn, 0, "sd1_insert", mmc_host);
445 		if (ret)
446 			goto out;
447 
448 		ret = request_threaded_irq(PB1200_SD1_EJECT_INT, pb1200_mmc1_cd,
449 				pb1200_mmc1_cdfn, 0, "sd1_eject", mmc_host);
450 		if (ret) {
451 			free_irq(PB1200_SD1_INSERT_INT, mmc_host);
452 			goto out;
453 		}
454 
455 		if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT)
456 			enable_irq(PB1200_SD1_EJECT_INT);
457 		else
458 			enable_irq(PB1200_SD1_INSERT_INT);
459 
460 	} else {
461 		free_irq(PB1200_SD1_INSERT_INT, mmc_host);
462 		free_irq(PB1200_SD1_EJECT_INT, mmc_host);
463 	}
464 	ret = 0;
465 out:
466 	return ret;
467 }
468 
469 static void pb1200_mmc1led_set(struct led_classdev *led,
470 			enum led_brightness brightness)
471 {
472 	if (brightness != LED_OFF)
473 			bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED1, 0);
474 	else
475 			bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED1);
476 }
477 
478 static struct led_classdev pb1200_mmc1_led = {
479 	.brightness_set = pb1200_mmc1led_set,
480 };
481 
482 static void pb1200_mmc1_set_power(void *mmc_host, int state)
483 {
484 	if (state) {
485 		bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR);
486 		msleep(400);	/* stabilization time */
487 	} else
488 		bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0);
489 }
490 
491 static int pb1200_mmc1_card_readonly(void *mmc_host)
492 {
493 	return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0;
494 }
495 
496 static int pb1200_mmc1_card_inserted(void *mmc_host)
497 {
498 	return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0;
499 }
500 
501 
502 static struct au1xmmc_platform_data db1200_mmc_platdata[2] = {
503 	[0] = {
504 		.cd_setup	= db1200_mmc_cd_setup,
505 		.set_power	= db1200_mmc_set_power,
506 		.card_inserted	= db1200_mmc_card_inserted,
507 		.card_readonly	= db1200_mmc_card_readonly,
508 		.led		= &db1200_mmc_led,
509 	},
510 	[1] = {
511 		.cd_setup	= pb1200_mmc1_cd_setup,
512 		.set_power	= pb1200_mmc1_set_power,
513 		.card_inserted	= pb1200_mmc1_card_inserted,
514 		.card_readonly	= pb1200_mmc1_card_readonly,
515 		.led		= &pb1200_mmc1_led,
516 	},
517 };
518 
519 static struct resource au1200_mmc0_resources[] = {
520 	[0] = {
521 		.start	= AU1100_SD0_PHYS_ADDR,
522 		.end	= AU1100_SD0_PHYS_ADDR + 0xfff,
523 		.flags	= IORESOURCE_MEM,
524 	},
525 	[1] = {
526 		.start	= AU1200_SD_INT,
527 		.end	= AU1200_SD_INT,
528 		.flags	= IORESOURCE_IRQ,
529 	},
530 	[2] = {
531 		.start	= AU1200_DSCR_CMD0_SDMS_TX0,
532 		.end	= AU1200_DSCR_CMD0_SDMS_TX0,
533 		.flags	= IORESOURCE_DMA,
534 	},
535 	[3] = {
536 		.start	= AU1200_DSCR_CMD0_SDMS_RX0,
537 		.end	= AU1200_DSCR_CMD0_SDMS_RX0,
538 		.flags	= IORESOURCE_DMA,
539 	}
540 };
541 
542 static struct platform_device db1200_mmc0_dev = {
543 	.name		= "au1xxx-mmc",
544 	.id		= 0,
545 	.dev = {
546 		.dma_mask		= &au1200_all_dmamask,
547 		.coherent_dma_mask	= DMA_BIT_MASK(32),
548 		.platform_data		= &db1200_mmc_platdata[0],
549 	},
550 	.num_resources	= ARRAY_SIZE(au1200_mmc0_resources),
551 	.resource	= au1200_mmc0_resources,
552 };
553 
554 static struct resource au1200_mmc1_res[] = {
555 	[0] = {
556 		.start	= AU1100_SD1_PHYS_ADDR,
557 		.end	= AU1100_SD1_PHYS_ADDR + 0xfff,
558 		.flags	= IORESOURCE_MEM,
559 	},
560 	[1] = {
561 		.start	= AU1200_SD_INT,
562 		.end	= AU1200_SD_INT,
563 		.flags	= IORESOURCE_IRQ,
564 	},
565 	[2] = {
566 		.start	= AU1200_DSCR_CMD0_SDMS_TX1,
567 		.end	= AU1200_DSCR_CMD0_SDMS_TX1,
568 		.flags	= IORESOURCE_DMA,
569 	},
570 	[3] = {
571 		.start	= AU1200_DSCR_CMD0_SDMS_RX1,
572 		.end	= AU1200_DSCR_CMD0_SDMS_RX1,
573 		.flags	= IORESOURCE_DMA,
574 	}
575 };
576 
577 static struct platform_device pb1200_mmc1_dev = {
578 	.name		= "au1xxx-mmc",
579 	.id		= 1,
580 	.dev = {
581 		.dma_mask		= &au1200_all_dmamask,
582 		.coherent_dma_mask	= DMA_BIT_MASK(32),
583 		.platform_data		= &db1200_mmc_platdata[1],
584 	},
585 	.num_resources	= ARRAY_SIZE(au1200_mmc1_res),
586 	.resource	= au1200_mmc1_res,
587 };
588 #endif /* CONFIG_MMC_AU1X */
589 
590 /**********************************************************************/
591 
592 static int db1200fb_panel_index(void)
593 {
594 	return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f;
595 }
596 
597 static int db1200fb_panel_init(void)
598 {
599 	/* Apply power */
600 	bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
601 				BCSR_BOARD_LCDBL);
602 	return 0;
603 }
604 
605 static int db1200fb_panel_shutdown(void)
606 {
607 	/* Remove power */
608 	bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
609 			     BCSR_BOARD_LCDBL, 0);
610 	return 0;
611 }
612 
613 static struct au1200fb_platdata db1200fb_pd = {
614 	.panel_index	= db1200fb_panel_index,
615 	.panel_init	= db1200fb_panel_init,
616 	.panel_shutdown = db1200fb_panel_shutdown,
617 };
618 
619 static struct resource au1200_lcd_res[] = {
620 	[0] = {
621 		.start	= AU1200_LCD_PHYS_ADDR,
622 		.end	= AU1200_LCD_PHYS_ADDR + 0x800 - 1,
623 		.flags	= IORESOURCE_MEM,
624 	},
625 	[1] = {
626 		.start	= AU1200_LCD_INT,
627 		.end	= AU1200_LCD_INT,
628 		.flags	= IORESOURCE_IRQ,
629 	}
630 };
631 
632 static struct platform_device au1200_lcd_dev = {
633 	.name		= "au1200-lcd",
634 	.id		= 0,
635 	.dev = {
636 		.dma_mask		= &au1200_all_dmamask,
637 		.coherent_dma_mask	= DMA_BIT_MASK(32),
638 		.platform_data		= &db1200fb_pd,
639 	},
640 	.num_resources	= ARRAY_SIZE(au1200_lcd_res),
641 	.resource	= au1200_lcd_res,
642 };
643 
644 /**********************************************************************/
645 
646 static struct resource au1200_psc0_res[] = {
647 	[0] = {
648 		.start	= AU1550_PSC0_PHYS_ADDR,
649 		.end	= AU1550_PSC0_PHYS_ADDR + 0xfff,
650 		.flags	= IORESOURCE_MEM,
651 	},
652 	[1] = {
653 		.start	= AU1200_PSC0_INT,
654 		.end	= AU1200_PSC0_INT,
655 		.flags	= IORESOURCE_IRQ,
656 	},
657 	[2] = {
658 		.start	= AU1200_DSCR_CMD0_PSC0_TX,
659 		.end	= AU1200_DSCR_CMD0_PSC0_TX,
660 		.flags	= IORESOURCE_DMA,
661 	},
662 	[3] = {
663 		.start	= AU1200_DSCR_CMD0_PSC0_RX,
664 		.end	= AU1200_DSCR_CMD0_PSC0_RX,
665 		.flags	= IORESOURCE_DMA,
666 	},
667 };
668 
669 static struct platform_device db1200_i2c_dev = {
670 	.name		= "au1xpsc_smbus",
671 	.id		= 0,	/* bus number */
672 	.num_resources	= ARRAY_SIZE(au1200_psc0_res),
673 	.resource	= au1200_psc0_res,
674 };
675 
676 static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol)
677 {
678 	if (cs)
679 		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL);
680 	else
681 		bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0);
682 }
683 
684 static struct au1550_spi_info db1200_spi_platdata = {
685 	.mainclk_hz	= 50000000,	/* PSC0 clock */
686 	.num_chipselect = 2,
687 	.activate_cs	= db1200_spi_cs_en,
688 };
689 
690 static struct platform_device db1200_spi_dev = {
691 	.dev	= {
692 		.dma_mask		= &au1200_all_dmamask,
693 		.coherent_dma_mask	= DMA_BIT_MASK(32),
694 		.platform_data		= &db1200_spi_platdata,
695 	},
696 	.name		= "au1550-spi",
697 	.id		= 0,	/* bus number */
698 	.num_resources	= ARRAY_SIZE(au1200_psc0_res),
699 	.resource	= au1200_psc0_res,
700 };
701 
702 static struct resource au1200_psc1_res[] = {
703 	[0] = {
704 		.start	= AU1550_PSC1_PHYS_ADDR,
705 		.end	= AU1550_PSC1_PHYS_ADDR + 0xfff,
706 		.flags	= IORESOURCE_MEM,
707 	},
708 	[1] = {
709 		.start	= AU1200_PSC1_INT,
710 		.end	= AU1200_PSC1_INT,
711 		.flags	= IORESOURCE_IRQ,
712 	},
713 	[2] = {
714 		.start	= AU1200_DSCR_CMD0_PSC1_TX,
715 		.end	= AU1200_DSCR_CMD0_PSC1_TX,
716 		.flags	= IORESOURCE_DMA,
717 	},
718 	[3] = {
719 		.start	= AU1200_DSCR_CMD0_PSC1_RX,
720 		.end	= AU1200_DSCR_CMD0_PSC1_RX,
721 		.flags	= IORESOURCE_DMA,
722 	},
723 };
724 
725 /* AC97 or I2S device */
726 static struct platform_device db1200_audio_dev = {
727 	/* name assigned later based on switch setting */
728 	.id		= 1,	/* PSC ID */
729 	.num_resources	= ARRAY_SIZE(au1200_psc1_res),
730 	.resource	= au1200_psc1_res,
731 };
732 
733 /* DB1200 ASoC card device */
734 static struct platform_device db1200_sound_dev = {
735 	/* name assigned later based on switch setting */
736 	.id		= 1,	/* PSC ID */
737 	.dev = {
738 		.dma_mask		= &au1200_all_dmamask,
739 		.coherent_dma_mask	= DMA_BIT_MASK(32),
740 	},
741 };
742 
743 static struct platform_device db1200_stac_dev = {
744 	.name		= "ac97-codec",
745 	.id		= 1,	/* on PSC1 */
746 };
747 
748 static struct platform_device db1200_audiodma_dev = {
749 	.name		= "au1xpsc-pcm",
750 	.id		= 1,	/* PSC ID */
751 };
752 
753 static struct platform_device *db1200_devs[] __initdata = {
754 	NULL,		/* PSC0, selected by S6.8 */
755 	&db1200_ide_dev,
756 #ifdef CONFIG_MMC_AU1X
757 	&db1200_mmc0_dev,
758 #endif
759 	&au1200_lcd_dev,
760 	&db1200_eth_dev,
761 	&db1200_nand_dev,
762 	&db1200_audiodma_dev,
763 	&db1200_audio_dev,
764 	&db1200_stac_dev,
765 	&db1200_sound_dev,
766 };
767 
768 static struct platform_device *pb1200_devs[] __initdata = {
769 #ifdef CONFIG_MMC_AU1X
770 	&pb1200_mmc1_dev,
771 #endif
772 };
773 
774 /* Some peripheral base addresses differ on the PB1200 */
775 static int __init pb1200_res_fixup(void)
776 {
777 	/* CPLD Revs earlier than 4 cause problems */
778 	if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) {
779 		printk(KERN_ERR "WARNING!!!\n");
780 		printk(KERN_ERR "WARNING!!!\n");
781 		printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n");
782 		printk(KERN_ERR "the board updated to latest revisions.\n");
783 		printk(KERN_ERR "This software will not work reliably\n");
784 		printk(KERN_ERR "on anything older than CPLD rev 4.!\n");
785 		printk(KERN_ERR "WARNING!!!\n");
786 		printk(KERN_ERR "WARNING!!!\n");
787 		return 1;
788 	}
789 
790 	db1200_nand_res[0].start = PB1200_NAND_PHYS_ADDR;
791 	db1200_nand_res[0].end	 = PB1200_NAND_PHYS_ADDR + 0xff;
792 	db1200_ide_res[0].start = PB1200_IDE_PHYS_ADDR;
793 	db1200_ide_res[0].end	= PB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1;
794 	db1200_eth_res[0].start = PB1200_ETH_PHYS_ADDR;
795 	db1200_eth_res[0].end	= PB1200_ETH_PHYS_ADDR + 0xff;
796 	return 0;
797 }
798 
799 int __init db1200_dev_setup(void)
800 {
801 	unsigned long pfc;
802 	unsigned short sw;
803 	int swapped, bid;
804 	struct clk *c;
805 
806 	bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
807 	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
808 	    (bid == BCSR_WHOAMI_PB1200_DDR2)) {
809 		if (pb1200_res_fixup())
810 			return -ENODEV;
811 	}
812 
813 	/* GPIO7 is low-level triggered CPLD cascade */
814 	irq_set_irq_type(AU1200_GPIO7_INT, IRQ_TYPE_LEVEL_LOW);
815 	bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
816 
817 	/* SMBus/SPI on PSC0, Audio on PSC1 */
818 	pfc = alchemy_rdsys(AU1000_SYS_PINFUNC);
819 	pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
820 	pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3);
821 	pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */
822 	alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
823 
824 	/* get 50MHz for I2C driver on PSC0 */
825 	c = clk_get(NULL, "psc0_intclk");
826 	if (!IS_ERR(c)) {
827 		pfc = clk_round_rate(c, 50000000);
828 		if ((pfc < 1) || (abs(50000000 - pfc) > 2500000))
829 			pr_warn("DB1200: can't get I2C close to 50MHz\n");
830 		else
831 			clk_set_rate(c, pfc);
832 		clk_prepare_enable(c);
833 		clk_put(c);
834 	}
835 
836 	/* insert/eject pairs: one of both is always screaming.	 To avoid
837 	 * issues they must not be automatically enabled when initially
838 	 * requested.
839 	 */
840 	irq_set_status_flags(DB1200_SD0_INSERT_INT, IRQ_NOAUTOEN);
841 	irq_set_status_flags(DB1200_SD0_EJECT_INT, IRQ_NOAUTOEN);
842 	irq_set_status_flags(DB1200_PC0_INSERT_INT, IRQ_NOAUTOEN);
843 	irq_set_status_flags(DB1200_PC0_EJECT_INT, IRQ_NOAUTOEN);
844 	irq_set_status_flags(DB1200_PC1_INSERT_INT, IRQ_NOAUTOEN);
845 	irq_set_status_flags(DB1200_PC1_EJECT_INT, IRQ_NOAUTOEN);
846 
847 	i2c_register_board_info(0, db1200_i2c_devs,
848 				ARRAY_SIZE(db1200_i2c_devs));
849 	spi_register_board_info(db1200_spi_devs,
850 				ARRAY_SIZE(db1200_spi_devs));
851 
852 	/* SWITCHES:	S6.8 I2C/SPI selector  (OFF=I2C	 ON=SPI)
853 	 *		S6.7 AC97/I2S selector (OFF=AC97 ON=I2S)
854 	 *		or S12 on the PB1200.
855 	 */
856 
857 	/* NOTE: GPIO215 controls OTG VBUS supply.  In SPI mode however
858 	 * this pin is claimed by PSC0 (unused though, but pinmux doesn't
859 	 * allow to free it without crippling the SPI interface).
860 	 * As a result, in SPI mode, OTG simply won't work (PSC0 uses
861 	 * it as an input pin which is pulled high on the boards).
862 	 */
863 	pfc = alchemy_rdsys(AU1000_SYS_PINFUNC) & ~SYS_PINFUNC_P0A;
864 
865 	/* switch off OTG VBUS supply */
866 	gpio_request(215, "otg-vbus");
867 	gpio_direction_output(215, 1);
868 
869 	printk(KERN_INFO "%s device configuration:\n", get_system_type());
870 
871 	sw = bcsr_read(BCSR_SWITCHES);
872 	if (sw & BCSR_SWITCHES_DIP_8) {
873 		db1200_devs[0] = &db1200_i2c_dev;
874 		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0);
875 
876 		pfc |= (2 << 17);	/* GPIO2 block owns GPIO215 */
877 
878 		printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n");
879 		printk(KERN_INFO "   OTG port VBUS supply available!\n");
880 	} else {
881 		db1200_devs[0] = &db1200_spi_dev;
882 		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX);
883 
884 		pfc |= (1 << 17);	/* PSC0 owns GPIO215 */
885 
886 		printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n");
887 		printk(KERN_INFO "   OTG port VBUS supply disabled\n");
888 	}
889 	alchemy_wrsys(pfc, AU1000_SYS_PINFUNC);
890 
891 	/* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S!
892 	 * so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S
893 	 */
894 	sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7;
895 	if (sw == BCSR_SWITCHES_DIP_8) {
896 		bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX);
897 		db1200_audio_dev.name = "au1xpsc_i2s";
898 		db1200_sound_dev.name = "db1200-i2s";
899 		printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n");
900 	} else {
901 		bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0);
902 		db1200_audio_dev.name = "au1xpsc_ac97";
903 		db1200_sound_dev.name = "db1200-ac97";
904 		printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n");
905 	}
906 
907 	/* Audio PSC clock is supplied externally. (FIXME: platdata!!) */
908 	__raw_writel(PSC_SEL_CLK_SERCLK,
909 	    (void __iomem *)KSEG1ADDR(AU1550_PSC1_PHYS_ADDR) + PSC_SEL_OFFSET);
910 	wmb();
911 
912 	db1x_register_pcmcia_socket(
913 		AU1000_PCMCIA_ATTR_PHYS_ADDR,
914 		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1,
915 		AU1000_PCMCIA_MEM_PHYS_ADDR,
916 		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
917 		AU1000_PCMCIA_IO_PHYS_ADDR,
918 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
919 		DB1200_PC0_INT, DB1200_PC0_INSERT_INT,
920 		/*DB1200_PC0_STSCHG_INT*/0, DB1200_PC0_EJECT_INT, 0);
921 
922 	db1x_register_pcmcia_socket(
923 		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004000000,
924 		AU1000_PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1,
925 		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004000000,
926 		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
927 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
928 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
929 		DB1200_PC1_INT, DB1200_PC1_INSERT_INT,
930 		/*DB1200_PC1_STSCHG_INT*/0, DB1200_PC1_EJECT_INT, 1);
931 
932 	swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT;
933 	db1x_register_norflash(64 << 20, 2, swapped);
934 
935 	platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs));
936 
937 	/* PB1200 is a DB1200 with a 2nd MMC and Camera connector */
938 	if ((bid == BCSR_WHOAMI_PB1200_DDR1) ||
939 	    (bid == BCSR_WHOAMI_PB1200_DDR2))
940 		platform_add_devices(pb1200_devs, ARRAY_SIZE(pb1200_devs));
941 
942 	return 0;
943 }
944