1 /* 2 * Platform device support for Au1x00 SoCs. 3 * 4 * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> 5 * 6 * (C) Copyright Embedded Alley Solutions, Inc 2005 7 * Author: Pantelis Antoniou <pantelis@embeddedalley.com> 8 * 9 * This file is licensed under the terms of the GNU General Public 10 * License version 2. This program is licensed "as is" without any 11 * warranty of any kind, whether express or implied. 12 */ 13 14 #include <linux/clk.h> 15 #include <linux/dma-mapping.h> 16 #include <linux/etherdevice.h> 17 #include <linux/init.h> 18 #include <linux/platform_device.h> 19 #include <linux/serial_8250.h> 20 #include <linux/slab.h> 21 #include <linux/usb/ehci_pdriver.h> 22 #include <linux/usb/ohci_pdriver.h> 23 24 #include <asm/mach-au1x00/au1000.h> 25 #include <asm/mach-au1x00/au1xxx_dbdma.h> 26 #include <asm/mach-au1x00/au1100_mmc.h> 27 #include <asm/mach-au1x00/au1xxx_eth.h> 28 29 #include <prom.h> 30 31 static void alchemy_8250_pm(struct uart_port *port, unsigned int state, 32 unsigned int old_state) 33 { 34 #ifdef CONFIG_SERIAL_8250 35 switch (state) { 36 case 0: 37 alchemy_uart_enable(CPHYSADDR(port->membase)); 38 serial8250_do_pm(port, state, old_state); 39 break; 40 case 3: /* power off */ 41 serial8250_do_pm(port, state, old_state); 42 alchemy_uart_disable(CPHYSADDR(port->membase)); 43 break; 44 default: 45 serial8250_do_pm(port, state, old_state); 46 break; 47 } 48 #endif 49 } 50 51 #define PORT(_base, _irq) \ 52 { \ 53 .mapbase = _base, \ 54 .irq = _irq, \ 55 .regshift = 2, \ 56 .iotype = UPIO_AU, \ 57 .flags = UPF_SKIP_TEST | UPF_IOREMAP | \ 58 UPF_FIXED_TYPE, \ 59 .type = PORT_16550A, \ 60 .pm = alchemy_8250_pm, \ 61 } 62 63 static struct plat_serial8250_port au1x00_uart_data[][4] __initdata = { 64 [ALCHEMY_CPU_AU1000] = { 65 PORT(AU1000_UART0_PHYS_ADDR, AU1000_UART0_INT), 66 PORT(AU1000_UART1_PHYS_ADDR, AU1000_UART1_INT), 67 PORT(AU1000_UART2_PHYS_ADDR, AU1000_UART2_INT), 68 PORT(AU1000_UART3_PHYS_ADDR, AU1000_UART3_INT), 69 }, 70 [ALCHEMY_CPU_AU1500] = { 71 PORT(AU1000_UART0_PHYS_ADDR, AU1500_UART0_INT), 72 PORT(AU1000_UART3_PHYS_ADDR, AU1500_UART3_INT), 73 }, 74 [ALCHEMY_CPU_AU1100] = { 75 PORT(AU1000_UART0_PHYS_ADDR, AU1100_UART0_INT), 76 PORT(AU1000_UART1_PHYS_ADDR, AU1100_UART1_INT), 77 PORT(AU1000_UART3_PHYS_ADDR, AU1100_UART3_INT), 78 }, 79 [ALCHEMY_CPU_AU1550] = { 80 PORT(AU1000_UART0_PHYS_ADDR, AU1550_UART0_INT), 81 PORT(AU1000_UART1_PHYS_ADDR, AU1550_UART1_INT), 82 PORT(AU1000_UART3_PHYS_ADDR, AU1550_UART3_INT), 83 }, 84 [ALCHEMY_CPU_AU1200] = { 85 PORT(AU1000_UART0_PHYS_ADDR, AU1200_UART0_INT), 86 PORT(AU1000_UART1_PHYS_ADDR, AU1200_UART1_INT), 87 }, 88 [ALCHEMY_CPU_AU1300] = { 89 PORT(AU1300_UART0_PHYS_ADDR, AU1300_UART0_INT), 90 PORT(AU1300_UART1_PHYS_ADDR, AU1300_UART1_INT), 91 PORT(AU1300_UART2_PHYS_ADDR, AU1300_UART2_INT), 92 PORT(AU1300_UART3_PHYS_ADDR, AU1300_UART3_INT), 93 }, 94 }; 95 96 static struct platform_device au1xx0_uart_device = { 97 .name = "serial8250", 98 .id = PLAT8250_DEV_AU1X00, 99 }; 100 101 static void __init alchemy_setup_uarts(int ctype) 102 { 103 long uartclk; 104 int s = sizeof(struct plat_serial8250_port); 105 int c = alchemy_get_uarts(ctype); 106 struct plat_serial8250_port *ports; 107 struct clk *clk = clk_get(NULL, ALCHEMY_PERIPH_CLK); 108 109 if (IS_ERR(clk)) 110 return; 111 if (clk_prepare_enable(clk)) { 112 clk_put(clk); 113 return; 114 } 115 uartclk = clk_get_rate(clk); 116 clk_put(clk); 117 118 ports = kcalloc(s, (c + 1), GFP_KERNEL); 119 if (!ports) { 120 printk(KERN_INFO "Alchemy: no memory for UART data\n"); 121 return; 122 } 123 memcpy(ports, au1x00_uart_data[ctype], s * c); 124 au1xx0_uart_device.dev.platform_data = ports; 125 126 /* Fill up uartclk. */ 127 for (s = 0; s < c; s++) 128 ports[s].uartclk = uartclk; 129 if (platform_device_register(&au1xx0_uart_device)) 130 printk(KERN_INFO "Alchemy: failed to register UARTs\n"); 131 } 132 133 134 /* The dmamask must be set for OHCI/EHCI to work */ 135 static u64 alchemy_ohci_dmamask = DMA_BIT_MASK(32); 136 static u64 __maybe_unused alchemy_ehci_dmamask = DMA_BIT_MASK(32); 137 138 /* Power on callback for the ehci platform driver */ 139 static int alchemy_ehci_power_on(struct platform_device *pdev) 140 { 141 return alchemy_usb_control(ALCHEMY_USB_EHCI0, 1); 142 } 143 144 /* Power off/suspend callback for the ehci platform driver */ 145 static void alchemy_ehci_power_off(struct platform_device *pdev) 146 { 147 alchemy_usb_control(ALCHEMY_USB_EHCI0, 0); 148 } 149 150 static struct usb_ehci_pdata alchemy_ehci_pdata = { 151 .no_io_watchdog = 1, 152 .power_on = alchemy_ehci_power_on, 153 .power_off = alchemy_ehci_power_off, 154 .power_suspend = alchemy_ehci_power_off, 155 }; 156 157 /* Power on callback for the ohci platform driver */ 158 static int alchemy_ohci_power_on(struct platform_device *pdev) 159 { 160 int unit; 161 162 unit = (pdev->id == 1) ? 163 ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; 164 165 return alchemy_usb_control(unit, 1); 166 } 167 168 /* Power off/suspend callback for the ohci platform driver */ 169 static void alchemy_ohci_power_off(struct platform_device *pdev) 170 { 171 int unit; 172 173 unit = (pdev->id == 1) ? 174 ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0; 175 176 alchemy_usb_control(unit, 0); 177 } 178 179 static struct usb_ohci_pdata alchemy_ohci_pdata = { 180 .power_on = alchemy_ohci_power_on, 181 .power_off = alchemy_ohci_power_off, 182 .power_suspend = alchemy_ohci_power_off, 183 }; 184 185 static unsigned long alchemy_ohci_data[][2] __initdata = { 186 [ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT }, 187 [ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT }, 188 [ALCHEMY_CPU_AU1100] = { AU1000_USB_OHCI_PHYS_ADDR, AU1100_USB_HOST_INT }, 189 [ALCHEMY_CPU_AU1550] = { AU1550_USB_OHCI_PHYS_ADDR, AU1550_USB_HOST_INT }, 190 [ALCHEMY_CPU_AU1200] = { AU1200_USB_OHCI_PHYS_ADDR, AU1200_USB_INT }, 191 [ALCHEMY_CPU_AU1300] = { AU1300_USB_OHCI0_PHYS_ADDR, AU1300_USB_INT }, 192 }; 193 194 static unsigned long alchemy_ehci_data[][2] __initdata = { 195 [ALCHEMY_CPU_AU1200] = { AU1200_USB_EHCI_PHYS_ADDR, AU1200_USB_INT }, 196 [ALCHEMY_CPU_AU1300] = { AU1300_USB_EHCI_PHYS_ADDR, AU1300_USB_INT }, 197 }; 198 199 static int __init _new_usbres(struct resource **r, struct platform_device **d) 200 { 201 *r = kcalloc(2, sizeof(struct resource), GFP_KERNEL); 202 if (!*r) 203 return -ENOMEM; 204 *d = kzalloc(sizeof(struct platform_device), GFP_KERNEL); 205 if (!*d) { 206 kfree(*r); 207 return -ENOMEM; 208 } 209 210 (*d)->dev.coherent_dma_mask = DMA_BIT_MASK(32); 211 (*d)->num_resources = 2; 212 (*d)->resource = *r; 213 214 return 0; 215 } 216 217 static void __init alchemy_setup_usb(int ctype) 218 { 219 struct resource *res; 220 struct platform_device *pdev; 221 222 /* setup OHCI0. Every variant has one */ 223 if (_new_usbres(&res, &pdev)) 224 return; 225 226 res[0].start = alchemy_ohci_data[ctype][0]; 227 res[0].end = res[0].start + 0x100 - 1; 228 res[0].flags = IORESOURCE_MEM; 229 res[1].start = alchemy_ohci_data[ctype][1]; 230 res[1].end = res[1].start; 231 res[1].flags = IORESOURCE_IRQ; 232 pdev->name = "ohci-platform"; 233 pdev->id = 0; 234 pdev->dev.dma_mask = &alchemy_ohci_dmamask; 235 pdev->dev.platform_data = &alchemy_ohci_pdata; 236 237 if (platform_device_register(pdev)) 238 printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n"); 239 240 241 /* setup EHCI0: Au1200/Au1300 */ 242 if ((ctype == ALCHEMY_CPU_AU1200) || (ctype == ALCHEMY_CPU_AU1300)) { 243 if (_new_usbres(&res, &pdev)) 244 return; 245 246 res[0].start = alchemy_ehci_data[ctype][0]; 247 res[0].end = res[0].start + 0x100 - 1; 248 res[0].flags = IORESOURCE_MEM; 249 res[1].start = alchemy_ehci_data[ctype][1]; 250 res[1].end = res[1].start; 251 res[1].flags = IORESOURCE_IRQ; 252 pdev->name = "ehci-platform"; 253 pdev->id = 0; 254 pdev->dev.dma_mask = &alchemy_ehci_dmamask; 255 pdev->dev.platform_data = &alchemy_ehci_pdata; 256 257 if (platform_device_register(pdev)) 258 printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n"); 259 } 260 261 /* Au1300: OHCI1 */ 262 if (ctype == ALCHEMY_CPU_AU1300) { 263 if (_new_usbres(&res, &pdev)) 264 return; 265 266 res[0].start = AU1300_USB_OHCI1_PHYS_ADDR; 267 res[0].end = res[0].start + 0x100 - 1; 268 res[0].flags = IORESOURCE_MEM; 269 res[1].start = AU1300_USB_INT; 270 res[1].end = res[1].start; 271 res[1].flags = IORESOURCE_IRQ; 272 pdev->name = "ohci-platform"; 273 pdev->id = 1; 274 pdev->dev.dma_mask = &alchemy_ohci_dmamask; 275 pdev->dev.platform_data = &alchemy_ohci_pdata; 276 277 if (platform_device_register(pdev)) 278 printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n"); 279 } 280 } 281 282 /* Macro to help defining the Ethernet MAC resources */ 283 #define MAC_RES_COUNT 4 /* MAC regs, MAC en, MAC INT, MACDMA regs */ 284 #define MAC_RES(_base, _enable, _irq, _macdma) \ 285 { \ 286 .start = _base, \ 287 .end = _base + 0xffff, \ 288 .flags = IORESOURCE_MEM, \ 289 }, \ 290 { \ 291 .start = _enable, \ 292 .end = _enable + 0x3, \ 293 .flags = IORESOURCE_MEM, \ 294 }, \ 295 { \ 296 .start = _irq, \ 297 .end = _irq, \ 298 .flags = IORESOURCE_IRQ \ 299 }, \ 300 { \ 301 .start = _macdma, \ 302 .end = _macdma + 0x1ff, \ 303 .flags = IORESOURCE_MEM, \ 304 } 305 306 static struct resource au1xxx_eth0_resources[][MAC_RES_COUNT] __initdata = { 307 [ALCHEMY_CPU_AU1000] = { 308 MAC_RES(AU1000_MAC0_PHYS_ADDR, 309 AU1000_MACEN_PHYS_ADDR, 310 AU1000_MAC0_DMA_INT, 311 AU1000_MACDMA0_PHYS_ADDR) 312 }, 313 [ALCHEMY_CPU_AU1500] = { 314 MAC_RES(AU1500_MAC0_PHYS_ADDR, 315 AU1500_MACEN_PHYS_ADDR, 316 AU1500_MAC0_DMA_INT, 317 AU1000_MACDMA0_PHYS_ADDR) 318 }, 319 [ALCHEMY_CPU_AU1100] = { 320 MAC_RES(AU1000_MAC0_PHYS_ADDR, 321 AU1000_MACEN_PHYS_ADDR, 322 AU1100_MAC0_DMA_INT, 323 AU1000_MACDMA0_PHYS_ADDR) 324 }, 325 [ALCHEMY_CPU_AU1550] = { 326 MAC_RES(AU1000_MAC0_PHYS_ADDR, 327 AU1000_MACEN_PHYS_ADDR, 328 AU1550_MAC0_DMA_INT, 329 AU1000_MACDMA0_PHYS_ADDR) 330 }, 331 }; 332 333 static struct au1000_eth_platform_data au1xxx_eth0_platform_data = { 334 .phy1_search_mac0 = 1, 335 }; 336 337 static struct platform_device au1xxx_eth0_device = { 338 .name = "au1000-eth", 339 .id = 0, 340 .num_resources = MAC_RES_COUNT, 341 .dev.platform_data = &au1xxx_eth0_platform_data, 342 }; 343 344 static struct resource au1xxx_eth1_resources[][MAC_RES_COUNT] __initdata = { 345 [ALCHEMY_CPU_AU1000] = { 346 MAC_RES(AU1000_MAC1_PHYS_ADDR, 347 AU1000_MACEN_PHYS_ADDR + 4, 348 AU1000_MAC1_DMA_INT, 349 AU1000_MACDMA1_PHYS_ADDR) 350 }, 351 [ALCHEMY_CPU_AU1500] = { 352 MAC_RES(AU1500_MAC1_PHYS_ADDR, 353 AU1500_MACEN_PHYS_ADDR + 4, 354 AU1500_MAC1_DMA_INT, 355 AU1000_MACDMA1_PHYS_ADDR) 356 }, 357 [ALCHEMY_CPU_AU1550] = { 358 MAC_RES(AU1000_MAC1_PHYS_ADDR, 359 AU1000_MACEN_PHYS_ADDR + 4, 360 AU1550_MAC1_DMA_INT, 361 AU1000_MACDMA1_PHYS_ADDR) 362 }, 363 }; 364 365 static struct au1000_eth_platform_data au1xxx_eth1_platform_data = { 366 .phy1_search_mac0 = 1, 367 }; 368 369 static struct platform_device au1xxx_eth1_device = { 370 .name = "au1000-eth", 371 .id = 1, 372 .num_resources = MAC_RES_COUNT, 373 .dev.platform_data = &au1xxx_eth1_platform_data, 374 }; 375 376 void __init au1xxx_override_eth_cfg(unsigned int port, 377 struct au1000_eth_platform_data *eth_data) 378 { 379 if (!eth_data || port > 1) 380 return; 381 382 if (port == 0) 383 memcpy(&au1xxx_eth0_platform_data, eth_data, 384 sizeof(struct au1000_eth_platform_data)); 385 else 386 memcpy(&au1xxx_eth1_platform_data, eth_data, 387 sizeof(struct au1000_eth_platform_data)); 388 } 389 390 static void __init alchemy_setup_macs(int ctype) 391 { 392 int ret, i; 393 unsigned char ethaddr[6]; 394 struct resource *macres; 395 396 /* Handle 1st MAC */ 397 if (alchemy_get_macs(ctype) < 1) 398 return; 399 400 macres = kmemdup(au1xxx_eth0_resources[ctype], 401 sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL); 402 if (!macres) { 403 printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n"); 404 return; 405 } 406 au1xxx_eth0_device.resource = macres; 407 408 i = prom_get_ethernet_addr(ethaddr); 409 if (!i && !is_valid_ether_addr(au1xxx_eth0_platform_data.mac)) 410 memcpy(au1xxx_eth0_platform_data.mac, ethaddr, 6); 411 412 ret = platform_device_register(&au1xxx_eth0_device); 413 if (ret) 414 printk(KERN_INFO "Alchemy: failed to register MAC0\n"); 415 416 417 /* Handle 2nd MAC */ 418 if (alchemy_get_macs(ctype) < 2) 419 return; 420 421 macres = kmemdup(au1xxx_eth1_resources[ctype], 422 sizeof(struct resource) * MAC_RES_COUNT, GFP_KERNEL); 423 if (!macres) { 424 printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n"); 425 return; 426 } 427 au1xxx_eth1_device.resource = macres; 428 429 ethaddr[5] += 1; /* next addr for 2nd MAC */ 430 if (!i && !is_valid_ether_addr(au1xxx_eth1_platform_data.mac)) 431 memcpy(au1xxx_eth1_platform_data.mac, ethaddr, 6); 432 433 /* Register second MAC if enabled in pinfunc */ 434 if (!(alchemy_rdsys(AU1000_SYS_PINFUNC) & SYS_PF_NI2)) { 435 ret = platform_device_register(&au1xxx_eth1_device); 436 if (ret) 437 printk(KERN_INFO "Alchemy: failed to register MAC1\n"); 438 } 439 } 440 441 static int __init au1xxx_platform_init(void) 442 { 443 int ctype = alchemy_get_cputype(); 444 445 alchemy_setup_uarts(ctype); 446 alchemy_setup_macs(ctype); 447 alchemy_setup_usb(ctype); 448 449 return 0; 450 } 451 452 arch_initcall(au1xxx_platform_init); 453