xref: /openbmc/linux/arch/mips/alchemy/common/irq.c (revision 82e6fdd6)
1 /*
2  * Copyright 2001, 2007-2008 MontaVista Software Inc.
3  * Author: MontaVista Software, Inc. <source@mvista.com>
4  *
5  * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
6  *
7  *  This program is free software; you can redistribute	 it and/or modify it
8  *  under  the terms of	 the GNU General  Public License as published by the
9  *  Free Software Foundation;  either version 2 of the	License, or (at your
10  *  option) any later version.
11  *
12  *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
13  *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
14  *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
15  *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
16  *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
17  *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
18  *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
19  *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
20  *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
21  *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
22  *
23  *  You should have received a copy of the  GNU General Public License along
24  *  with this program; if not, write  to the Free Software Foundation, Inc.,
25  *  675 Mass Ave, Cambridge, MA 02139, USA.
26  */
27 
28 #include <linux/export.h>
29 #include <linux/init.h>
30 #include <linux/interrupt.h>
31 #include <linux/slab.h>
32 #include <linux/syscore_ops.h>
33 
34 #include <asm/irq_cpu.h>
35 #include <asm/mach-au1x00/au1000.h>
36 #include <asm/mach-au1x00/gpio-au1300.h>
37 
38 /* Interrupt Controller register offsets */
39 #define IC_CFG0RD	0x40
40 #define IC_CFG0SET	0x40
41 #define IC_CFG0CLR	0x44
42 #define IC_CFG1RD	0x48
43 #define IC_CFG1SET	0x48
44 #define IC_CFG1CLR	0x4C
45 #define IC_CFG2RD	0x50
46 #define IC_CFG2SET	0x50
47 #define IC_CFG2CLR	0x54
48 #define IC_REQ0INT	0x54
49 #define IC_SRCRD	0x58
50 #define IC_SRCSET	0x58
51 #define IC_SRCCLR	0x5C
52 #define IC_REQ1INT	0x5C
53 #define IC_ASSIGNRD	0x60
54 #define IC_ASSIGNSET	0x60
55 #define IC_ASSIGNCLR	0x64
56 #define IC_WAKERD	0x68
57 #define IC_WAKESET	0x68
58 #define IC_WAKECLR	0x6C
59 #define IC_MASKRD	0x70
60 #define IC_MASKSET	0x70
61 #define IC_MASKCLR	0x74
62 #define IC_RISINGRD	0x78
63 #define IC_RISINGCLR	0x78
64 #define IC_FALLINGRD	0x7C
65 #define IC_FALLINGCLR	0x7C
66 #define IC_TESTBIT	0x80
67 
68 /* per-processor fixed function irqs */
69 struct alchemy_irqmap {
70 	int irq;	/* linux IRQ number */
71 	int type;	/* IRQ_TYPE_ */
72 	int prio;	/* irq priority, 0 highest, 3 lowest */
73 	int internal;	/* GPIC: internal source (no ext. pin)? */
74 };
75 
76 static int au1x_ic_settype(struct irq_data *d, unsigned int type);
77 static int au1300_gpic_settype(struct irq_data *d, unsigned int type);
78 
79 
80 /* NOTE on interrupt priorities: The original writers of this code said:
81  *
82  * Because of the tight timing of SETUP token to reply transactions,
83  * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT)
84  * needs the highest priority.
85  */
86 struct alchemy_irqmap au1000_irqmap[] __initdata = {
87 	{ AU1000_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
88 	{ AU1000_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
89 	{ AU1000_UART2_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
90 	{ AU1000_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
91 	{ AU1000_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
92 	{ AU1000_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
93 	{ AU1000_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
94 	{ AU1000_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
95 	{ AU1000_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
96 	{ AU1000_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
97 	{ AU1000_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
98 	{ AU1000_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
99 	{ AU1000_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
100 	{ AU1000_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
101 	{ AU1000_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
102 	{ AU1000_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
103 	{ AU1000_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
104 	{ AU1000_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
105 	{ AU1000_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
106 	{ AU1000_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
107 	{ AU1000_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
108 	{ AU1000_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
109 	{ AU1000_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
110 	{ AU1000_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
111 	{ AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
112 	{ AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
113 	{ AU1000_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
114 	{ AU1000_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
115 	{ AU1000_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
116 	{ AU1000_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
117 	{ AU1000_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
118 	{ -1, },
119 };
120 
121 struct alchemy_irqmap au1500_irqmap[] __initdata = {
122 	{ AU1500_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
123 	{ AU1500_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
124 	{ AU1500_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
125 	{ AU1500_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
126 	{ AU1500_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
127 	{ AU1500_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
128 	{ AU1500_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
129 	{ AU1500_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
130 	{ AU1500_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
131 	{ AU1500_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
132 	{ AU1500_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
133 	{ AU1500_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
134 	{ AU1500_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
135 	{ AU1500_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
136 	{ AU1500_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
137 	{ AU1500_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
138 	{ AU1500_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
139 	{ AU1500_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
140 	{ AU1500_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
141 	{ AU1500_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
142 	{ AU1500_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
143 	{ AU1500_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
144 	{ AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
145 	{ AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
146 	{ AU1500_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
147 	{ AU1500_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
148 	{ AU1500_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
149 	{ AU1500_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
150 	{ AU1500_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
151 	{ -1, },
152 };
153 
154 struct alchemy_irqmap au1100_irqmap[] __initdata = {
155 	{ AU1100_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
156 	{ AU1100_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
157 	{ AU1100_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
158 	{ AU1100_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
159 	{ AU1100_SSI0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
160 	{ AU1100_SSI1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
161 	{ AU1100_DMA_INT_BASE,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
162 	{ AU1100_DMA_INT_BASE+1,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
163 	{ AU1100_DMA_INT_BASE+2,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
164 	{ AU1100_DMA_INT_BASE+3,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
165 	{ AU1100_DMA_INT_BASE+4,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
166 	{ AU1100_DMA_INT_BASE+5,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
167 	{ AU1100_DMA_INT_BASE+6,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
168 	{ AU1100_DMA_INT_BASE+7,  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
169 	{ AU1100_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
170 	{ AU1100_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
171 	{ AU1100_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
172 	{ AU1100_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
173 	{ AU1100_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
174 	{ AU1100_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
175 	{ AU1100_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
176 	{ AU1100_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
177 	{ AU1100_IRDA_TX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
178 	{ AU1100_IRDA_RX_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
179 	{ AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
180 	{ AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
181 	{ AU1100_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
182 	{ AU1100_ACSYNC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
183 	{ AU1100_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
184 	{ AU1100_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
185 	{ AU1100_AC97C_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
186 	{ -1, },
187 };
188 
189 struct alchemy_irqmap au1550_irqmap[] __initdata = {
190 	{ AU1550_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
191 	{ AU1550_PCI_INTA,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
192 	{ AU1550_PCI_INTB,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
193 	{ AU1550_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
194 	{ AU1550_CRYPTO_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
195 	{ AU1550_PCI_INTC,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
196 	{ AU1550_PCI_INTD,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
197 	{ AU1550_PCI_RST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
198 	{ AU1550_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
199 	{ AU1550_UART3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
200 	{ AU1550_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
201 	{ AU1550_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
202 	{ AU1550_PSC2_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
203 	{ AU1550_PSC3_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
204 	{ AU1550_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
205 	{ AU1550_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
206 	{ AU1550_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
207 	{ AU1550_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
208 	{ AU1550_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
209 	{ AU1550_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
210 	{ AU1550_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
211 	{ AU1550_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
212 	{ AU1550_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
213 	{ AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH,	0, 0 },
214 	{ AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 1, 0 },
215 	{ AU1550_USB_HOST_INT,	  IRQ_TYPE_LEVEL_LOW,	1, 0 },
216 	{ AU1550_MAC0_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
217 	{ AU1550_MAC1_DMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
218 	{ -1, },
219 };
220 
221 struct alchemy_irqmap au1200_irqmap[] __initdata = {
222 	{ AU1200_UART0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
223 	{ AU1200_SWT_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
224 	{ AU1200_SD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
225 	{ AU1200_DDMA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
226 	{ AU1200_MAE_BE_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
227 	{ AU1200_UART1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
228 	{ AU1200_MAE_FE_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
229 	{ AU1200_PSC0_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
230 	{ AU1200_PSC1_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
231 	{ AU1200_AES_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
232 	{ AU1200_CAMERA_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
233 	{ AU1200_TOY_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
234 	{ AU1200_TOY_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
235 	{ AU1200_TOY_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
236 	{ AU1200_TOY_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
237 	{ AU1200_RTC_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
238 	{ AU1200_RTC_MATCH0_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
239 	{ AU1200_RTC_MATCH1_INT,  IRQ_TYPE_EDGE_RISING, 1, 0 },
240 	{ AU1200_RTC_MATCH2_INT,  IRQ_TYPE_EDGE_RISING, 0, 0 },
241 	{ AU1200_NAND_INT,	  IRQ_TYPE_EDGE_RISING, 1, 0 },
242 	{ AU1200_USB_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
243 	{ AU1200_LCD_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
244 	{ AU1200_MAE_BOTH_INT,	  IRQ_TYPE_LEVEL_HIGH,	1, 0 },
245 	{ -1, },
246 };
247 
248 static struct alchemy_irqmap au1300_irqmap[] __initdata = {
249 	/* multifunction: gpio pin or device */
250 	{ AU1300_UART1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
251 	{ AU1300_UART2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
252 	{ AU1300_UART3_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
253 	{ AU1300_SD1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
254 	{ AU1300_SD2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
255 	{ AU1300_PSC0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
256 	{ AU1300_PSC1_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
257 	{ AU1300_PSC2_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
258 	{ AU1300_PSC3_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
259 	{ AU1300_NAND_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 0, },
260 	/* au1300 internal */
261 	{ AU1300_DDMA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
262 	{ AU1300_MMU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
263 	{ AU1300_MPU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
264 	{ AU1300_GPU_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
265 	{ AU1300_UDMA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
266 	{ AU1300_TOY_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
267 	{ AU1300_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
268 	{ AU1300_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
269 	{ AU1300_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
270 	{ AU1300_RTC_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
271 	{ AU1300_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
272 	{ AU1300_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING,	1, 1, },
273 	{ AU1300_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING,	0, 1, },
274 	{ AU1300_UART0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
275 	{ AU1300_SD0_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
276 	{ AU1300_USB_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
277 	{ AU1300_LCD_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
278 	{ AU1300_BSA_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
279 	{ AU1300_MPE_INT,	 IRQ_TYPE_EDGE_RISING,	1, 1, },
280 	{ AU1300_ITE_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
281 	{ AU1300_AES_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
282 	{ AU1300_CIM_INT,	 IRQ_TYPE_LEVEL_HIGH,	1, 1, },
283 	{ -1, },	/* terminator */
284 };
285 
286 /******************************************************************************/
287 
288 static void au1x_ic0_unmask(struct irq_data *d)
289 {
290 	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
291 	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
292 
293 	__raw_writel(1 << bit, base + IC_MASKSET);
294 	__raw_writel(1 << bit, base + IC_WAKESET);
295 	wmb();
296 }
297 
298 static void au1x_ic1_unmask(struct irq_data *d)
299 {
300 	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
301 	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
302 
303 	__raw_writel(1 << bit, base + IC_MASKSET);
304 	__raw_writel(1 << bit, base + IC_WAKESET);
305 	wmb();
306 }
307 
308 static void au1x_ic0_mask(struct irq_data *d)
309 {
310 	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
311 	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
312 
313 	__raw_writel(1 << bit, base + IC_MASKCLR);
314 	__raw_writel(1 << bit, base + IC_WAKECLR);
315 	wmb();
316 }
317 
318 static void au1x_ic1_mask(struct irq_data *d)
319 {
320 	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
321 	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
322 
323 	__raw_writel(1 << bit, base + IC_MASKCLR);
324 	__raw_writel(1 << bit, base + IC_WAKECLR);
325 	wmb();
326 }
327 
328 static void au1x_ic0_ack(struct irq_data *d)
329 {
330 	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
331 	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
332 
333 	/*
334 	 * This may assume that we don't get interrupts from
335 	 * both edges at once, or if we do, that we don't care.
336 	 */
337 	__raw_writel(1 << bit, base + IC_FALLINGCLR);
338 	__raw_writel(1 << bit, base + IC_RISINGCLR);
339 	wmb();
340 }
341 
342 static void au1x_ic1_ack(struct irq_data *d)
343 {
344 	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
345 	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
346 
347 	/*
348 	 * This may assume that we don't get interrupts from
349 	 * both edges at once, or if we do, that we don't care.
350 	 */
351 	__raw_writel(1 << bit, base + IC_FALLINGCLR);
352 	__raw_writel(1 << bit, base + IC_RISINGCLR);
353 	wmb();
354 }
355 
356 static void au1x_ic0_maskack(struct irq_data *d)
357 {
358 	unsigned int bit = d->irq - AU1000_INTC0_INT_BASE;
359 	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
360 
361 	__raw_writel(1 << bit, base + IC_WAKECLR);
362 	__raw_writel(1 << bit, base + IC_MASKCLR);
363 	__raw_writel(1 << bit, base + IC_RISINGCLR);
364 	__raw_writel(1 << bit, base + IC_FALLINGCLR);
365 	wmb();
366 }
367 
368 static void au1x_ic1_maskack(struct irq_data *d)
369 {
370 	unsigned int bit = d->irq - AU1000_INTC1_INT_BASE;
371 	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
372 
373 	__raw_writel(1 << bit, base + IC_WAKECLR);
374 	__raw_writel(1 << bit, base + IC_MASKCLR);
375 	__raw_writel(1 << bit, base + IC_RISINGCLR);
376 	__raw_writel(1 << bit, base + IC_FALLINGCLR);
377 	wmb();
378 }
379 
380 static int au1x_ic1_setwake(struct irq_data *d, unsigned int on)
381 {
382 	int bit = d->irq - AU1000_INTC1_INT_BASE;
383 	unsigned long wakemsk, flags;
384 
385 	/* only GPIO 0-7 can act as wakeup source.  Fortunately these
386 	 * are wired up identically on all supported variants.
387 	 */
388 	if ((bit < 0) || (bit > 7))
389 		return -EINVAL;
390 
391 	local_irq_save(flags);
392 	wakemsk = alchemy_rdsys(AU1000_SYS_WAKEMSK);
393 	if (on)
394 		wakemsk |= 1 << bit;
395 	else
396 		wakemsk &= ~(1 << bit);
397 	alchemy_wrsys(wakemsk, AU1000_SYS_WAKEMSK);
398 	local_irq_restore(flags);
399 
400 	return 0;
401 }
402 
403 /*
404  * irq_chips for both ICs; this way the mask handlers can be
405  * as short as possible.
406  */
407 static struct irq_chip au1x_ic0_chip = {
408 	.name		= "Alchemy-IC0",
409 	.irq_ack	= au1x_ic0_ack,
410 	.irq_mask	= au1x_ic0_mask,
411 	.irq_mask_ack	= au1x_ic0_maskack,
412 	.irq_unmask	= au1x_ic0_unmask,
413 	.irq_set_type	= au1x_ic_settype,
414 };
415 
416 static struct irq_chip au1x_ic1_chip = {
417 	.name		= "Alchemy-IC1",
418 	.irq_ack	= au1x_ic1_ack,
419 	.irq_mask	= au1x_ic1_mask,
420 	.irq_mask_ack	= au1x_ic1_maskack,
421 	.irq_unmask	= au1x_ic1_unmask,
422 	.irq_set_type	= au1x_ic_settype,
423 	.irq_set_wake	= au1x_ic1_setwake,
424 };
425 
426 static int au1x_ic_settype(struct irq_data *d, unsigned int flow_type)
427 {
428 	struct irq_chip *chip;
429 	unsigned int bit, irq = d->irq;
430 	irq_flow_handler_t handler = NULL;
431 	unsigned char *name = NULL;
432 	void __iomem *base;
433 	int ret;
434 
435 	if (irq >= AU1000_INTC1_INT_BASE) {
436 		bit = irq - AU1000_INTC1_INT_BASE;
437 		chip = &au1x_ic1_chip;
438 		base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
439 	} else {
440 		bit = irq - AU1000_INTC0_INT_BASE;
441 		chip = &au1x_ic0_chip;
442 		base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
443 	}
444 
445 	if (bit > 31)
446 		return -EINVAL;
447 
448 	ret = 0;
449 
450 	switch (flow_type) {	/* cfgregs 2:1:0 */
451 	case IRQ_TYPE_EDGE_RISING:	/* 0:0:1 */
452 		__raw_writel(1 << bit, base + IC_CFG2CLR);
453 		__raw_writel(1 << bit, base + IC_CFG1CLR);
454 		__raw_writel(1 << bit, base + IC_CFG0SET);
455 		handler = handle_edge_irq;
456 		name = "riseedge";
457 		break;
458 	case IRQ_TYPE_EDGE_FALLING:	/* 0:1:0 */
459 		__raw_writel(1 << bit, base + IC_CFG2CLR);
460 		__raw_writel(1 << bit, base + IC_CFG1SET);
461 		__raw_writel(1 << bit, base + IC_CFG0CLR);
462 		handler = handle_edge_irq;
463 		name = "falledge";
464 		break;
465 	case IRQ_TYPE_EDGE_BOTH:	/* 0:1:1 */
466 		__raw_writel(1 << bit, base + IC_CFG2CLR);
467 		__raw_writel(1 << bit, base + IC_CFG1SET);
468 		__raw_writel(1 << bit, base + IC_CFG0SET);
469 		handler = handle_edge_irq;
470 		name = "bothedge";
471 		break;
472 	case IRQ_TYPE_LEVEL_HIGH:	/* 1:0:1 */
473 		__raw_writel(1 << bit, base + IC_CFG2SET);
474 		__raw_writel(1 << bit, base + IC_CFG1CLR);
475 		__raw_writel(1 << bit, base + IC_CFG0SET);
476 		handler = handle_level_irq;
477 		name = "hilevel";
478 		break;
479 	case IRQ_TYPE_LEVEL_LOW:	/* 1:1:0 */
480 		__raw_writel(1 << bit, base + IC_CFG2SET);
481 		__raw_writel(1 << bit, base + IC_CFG1SET);
482 		__raw_writel(1 << bit, base + IC_CFG0CLR);
483 		handler = handle_level_irq;
484 		name = "lowlevel";
485 		break;
486 	case IRQ_TYPE_NONE:		/* 0:0:0 */
487 		__raw_writel(1 << bit, base + IC_CFG2CLR);
488 		__raw_writel(1 << bit, base + IC_CFG1CLR);
489 		__raw_writel(1 << bit, base + IC_CFG0CLR);
490 		break;
491 	default:
492 		ret = -EINVAL;
493 	}
494 	irq_set_chip_handler_name_locked(d, chip, handler, name);
495 
496 	wmb();
497 
498 	return ret;
499 }
500 
501 /******************************************************************************/
502 
503 /*
504  * au1300_gpic_chgcfg - change PIN configuration.
505  * @gpio:	pin to change (0-based GPIO number from datasheet).
506  * @clr:	clear all bits set in 'clr'.
507  * @set:	set these bits.
508  *
509  * modifies a pins' configuration register, bits set in @clr will
510  * be cleared in the register, bits in @set will be set.
511  */
512 static inline void au1300_gpic_chgcfg(unsigned int gpio,
513 				      unsigned long clr,
514 				      unsigned long set)
515 {
516 	void __iomem *r = AU1300_GPIC_ADDR;
517 	unsigned long l;
518 
519 	r += gpio * 4;	/* offset into pin config array */
520 	l = __raw_readl(r + AU1300_GPIC_PINCFG);
521 	l &= ~clr;
522 	l |= set;
523 	__raw_writel(l, r + AU1300_GPIC_PINCFG);
524 	wmb();
525 }
526 
527 /*
528  * au1300_pinfunc_to_gpio - assign a pin as GPIO input (GPIO ctrl).
529  * @pin:	pin (0-based GPIO number from datasheet).
530  *
531  * Assigns a GPIO pin to the GPIO controller, so its level can either
532  * be read or set through the generic GPIO functions.
533  * If you need a GPOUT, use au1300_gpio_set_value(pin, 0/1).
534  * REVISIT: is this function really necessary?
535  */
536 void au1300_pinfunc_to_gpio(enum au1300_multifunc_pins gpio)
537 {
538 	au1300_gpio_direction_input(gpio + AU1300_GPIO_BASE);
539 }
540 EXPORT_SYMBOL_GPL(au1300_pinfunc_to_gpio);
541 
542 /*
543  * au1300_pinfunc_to_dev - assign a pin to the device function.
544  * @pin:	pin (0-based GPIO number from datasheet).
545  *
546  * Assigns a GPIO pin to its associated device function; the pin will be
547  * driven by the device and not through GPIO functions.
548  */
549 void au1300_pinfunc_to_dev(enum au1300_multifunc_pins gpio)
550 {
551 	void __iomem *r = AU1300_GPIC_ADDR;
552 	unsigned long bit;
553 
554 	r += GPIC_GPIO_BANKOFF(gpio);
555 	bit = GPIC_GPIO_TO_BIT(gpio);
556 	__raw_writel(bit, r + AU1300_GPIC_DEVSEL);
557 	wmb();
558 }
559 EXPORT_SYMBOL_GPL(au1300_pinfunc_to_dev);
560 
561 /*
562  * au1300_set_irq_priority -  set internal priority of IRQ.
563  * @irq:	irq to set priority (linux irq number).
564  * @p:		priority (0 = highest, 3 = lowest).
565  */
566 void au1300_set_irq_priority(unsigned int irq, int p)
567 {
568 	irq -= ALCHEMY_GPIC_INT_BASE;
569 	au1300_gpic_chgcfg(irq, GPIC_CFG_IL_MASK, GPIC_CFG_IL_SET(p));
570 }
571 EXPORT_SYMBOL_GPL(au1300_set_irq_priority);
572 
573 /*
574  * au1300_set_dbdma_gpio - assign a gpio to one of the DBDMA triggers.
575  * @dchan:	dbdma trigger select (0, 1).
576  * @gpio:	pin to assign as trigger.
577  *
578  * DBDMA controller has 2 external trigger sources; this function
579  * assigns a GPIO to the selected trigger.
580  */
581 void au1300_set_dbdma_gpio(int dchan, unsigned int gpio)
582 {
583 	unsigned long r;
584 
585 	if ((dchan >= 0) && (dchan <= 1)) {
586 		r = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
587 		r &= ~(0xff << (8 * dchan));
588 		r |= (gpio & 0x7f) << (8 * dchan);
589 		__raw_writel(r, AU1300_GPIC_ADDR + AU1300_GPIC_DMASEL);
590 		wmb();
591 	}
592 }
593 
594 static inline void gpic_pin_set_idlewake(unsigned int gpio, int allow)
595 {
596 	au1300_gpic_chgcfg(gpio, GPIC_CFG_IDLEWAKE,
597 			   allow ? GPIC_CFG_IDLEWAKE : 0);
598 }
599 
600 static void au1300_gpic_mask(struct irq_data *d)
601 {
602 	void __iomem *r = AU1300_GPIC_ADDR;
603 	unsigned long bit, irq = d->irq;
604 
605 	irq -= ALCHEMY_GPIC_INT_BASE;
606 	r += GPIC_GPIO_BANKOFF(irq);
607 	bit = GPIC_GPIO_TO_BIT(irq);
608 	__raw_writel(bit, r + AU1300_GPIC_IDIS);
609 	wmb();
610 
611 	gpic_pin_set_idlewake(irq, 0);
612 }
613 
614 static void au1300_gpic_unmask(struct irq_data *d)
615 {
616 	void __iomem *r = AU1300_GPIC_ADDR;
617 	unsigned long bit, irq = d->irq;
618 
619 	irq -= ALCHEMY_GPIC_INT_BASE;
620 
621 	gpic_pin_set_idlewake(irq, 1);
622 
623 	r += GPIC_GPIO_BANKOFF(irq);
624 	bit = GPIC_GPIO_TO_BIT(irq);
625 	__raw_writel(bit, r + AU1300_GPIC_IEN);
626 	wmb();
627 }
628 
629 static void au1300_gpic_maskack(struct irq_data *d)
630 {
631 	void __iomem *r = AU1300_GPIC_ADDR;
632 	unsigned long bit, irq = d->irq;
633 
634 	irq -= ALCHEMY_GPIC_INT_BASE;
635 	r += GPIC_GPIO_BANKOFF(irq);
636 	bit = GPIC_GPIO_TO_BIT(irq);
637 	__raw_writel(bit, r + AU1300_GPIC_IPEND);	/* ack */
638 	__raw_writel(bit, r + AU1300_GPIC_IDIS);	/* mask */
639 	wmb();
640 
641 	gpic_pin_set_idlewake(irq, 0);
642 }
643 
644 static void au1300_gpic_ack(struct irq_data *d)
645 {
646 	void __iomem *r = AU1300_GPIC_ADDR;
647 	unsigned long bit, irq = d->irq;
648 
649 	irq -= ALCHEMY_GPIC_INT_BASE;
650 	r += GPIC_GPIO_BANKOFF(irq);
651 	bit = GPIC_GPIO_TO_BIT(irq);
652 	__raw_writel(bit, r + AU1300_GPIC_IPEND);	/* ack */
653 	wmb();
654 }
655 
656 static struct irq_chip au1300_gpic = {
657 	.name		= "GPIOINT",
658 	.irq_ack	= au1300_gpic_ack,
659 	.irq_mask	= au1300_gpic_mask,
660 	.irq_mask_ack	= au1300_gpic_maskack,
661 	.irq_unmask	= au1300_gpic_unmask,
662 	.irq_set_type	= au1300_gpic_settype,
663 };
664 
665 static int au1300_gpic_settype(struct irq_data *d, unsigned int type)
666 {
667 	unsigned long s;
668 	unsigned char *name = NULL;
669 	irq_flow_handler_t hdl = NULL;
670 
671 	switch (type) {
672 	case IRQ_TYPE_LEVEL_HIGH:
673 		s = GPIC_CFG_IC_LEVEL_HIGH;
674 		name = "high";
675 		hdl = handle_level_irq;
676 		break;
677 	case IRQ_TYPE_LEVEL_LOW:
678 		s = GPIC_CFG_IC_LEVEL_LOW;
679 		name = "low";
680 		hdl = handle_level_irq;
681 		break;
682 	case IRQ_TYPE_EDGE_RISING:
683 		s = GPIC_CFG_IC_EDGE_RISE;
684 		name = "posedge";
685 		hdl = handle_edge_irq;
686 		break;
687 	case IRQ_TYPE_EDGE_FALLING:
688 		s = GPIC_CFG_IC_EDGE_FALL;
689 		name = "negedge";
690 		hdl = handle_edge_irq;
691 		break;
692 	case IRQ_TYPE_EDGE_BOTH:
693 		s = GPIC_CFG_IC_EDGE_BOTH;
694 		name = "bothedge";
695 		hdl = handle_edge_irq;
696 		break;
697 	case IRQ_TYPE_NONE:
698 		s = GPIC_CFG_IC_OFF;
699 		name = "disabled";
700 		hdl = handle_level_irq;
701 		break;
702 	default:
703 		return -EINVAL;
704 	}
705 
706 	irq_set_chip_handler_name_locked(d, &au1300_gpic, hdl, name);
707 
708 	au1300_gpic_chgcfg(d->irq - ALCHEMY_GPIC_INT_BASE, GPIC_CFG_IC_MASK, s);
709 
710 	return 0;
711 }
712 
713 /******************************************************************************/
714 
715 static inline void ic_init(void __iomem *base)
716 {
717 	/* initialize interrupt controller to a safe state */
718 	__raw_writel(0xffffffff, base + IC_CFG0CLR);
719 	__raw_writel(0xffffffff, base + IC_CFG1CLR);
720 	__raw_writel(0xffffffff, base + IC_CFG2CLR);
721 	__raw_writel(0xffffffff, base + IC_MASKCLR);
722 	__raw_writel(0xffffffff, base + IC_ASSIGNCLR);
723 	__raw_writel(0xffffffff, base + IC_WAKECLR);
724 	__raw_writel(0xffffffff, base + IC_SRCSET);
725 	__raw_writel(0xffffffff, base + IC_FALLINGCLR);
726 	__raw_writel(0xffffffff, base + IC_RISINGCLR);
727 	__raw_writel(0x00000000, base + IC_TESTBIT);
728 	wmb();
729 }
730 
731 static unsigned long alchemy_gpic_pmdata[ALCHEMY_GPIC_INT_NUM + 6];
732 
733 static inline void alchemy_ic_suspend_one(void __iomem *base, unsigned long *d)
734 {
735 	d[0] = __raw_readl(base + IC_CFG0RD);
736 	d[1] = __raw_readl(base + IC_CFG1RD);
737 	d[2] = __raw_readl(base + IC_CFG2RD);
738 	d[3] = __raw_readl(base + IC_SRCRD);
739 	d[4] = __raw_readl(base + IC_ASSIGNRD);
740 	d[5] = __raw_readl(base + IC_WAKERD);
741 	d[6] = __raw_readl(base + IC_MASKRD);
742 	ic_init(base);		/* shut it up too while at it */
743 }
744 
745 static inline void alchemy_ic_resume_one(void __iomem *base, unsigned long *d)
746 {
747 	ic_init(base);
748 
749 	__raw_writel(d[0], base + IC_CFG0SET);
750 	__raw_writel(d[1], base + IC_CFG1SET);
751 	__raw_writel(d[2], base + IC_CFG2SET);
752 	__raw_writel(d[3], base + IC_SRCSET);
753 	__raw_writel(d[4], base + IC_ASSIGNSET);
754 	__raw_writel(d[5], base + IC_WAKESET);
755 	wmb();
756 
757 	__raw_writel(d[6], base + IC_MASKSET);
758 	wmb();
759 }
760 
761 static int alchemy_ic_suspend(void)
762 {
763 	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
764 			       alchemy_gpic_pmdata);
765 	alchemy_ic_suspend_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
766 			       &alchemy_gpic_pmdata[7]);
767 	return 0;
768 }
769 
770 static void alchemy_ic_resume(void)
771 {
772 	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR),
773 			      &alchemy_gpic_pmdata[7]);
774 	alchemy_ic_resume_one((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR),
775 			      alchemy_gpic_pmdata);
776 }
777 
778 static int alchemy_gpic_suspend(void)
779 {
780 	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
781 	int i;
782 
783 	/* save 4 interrupt mask status registers */
784 	alchemy_gpic_pmdata[0] = __raw_readl(base + AU1300_GPIC_IEN + 0x0);
785 	alchemy_gpic_pmdata[1] = __raw_readl(base + AU1300_GPIC_IEN + 0x4);
786 	alchemy_gpic_pmdata[2] = __raw_readl(base + AU1300_GPIC_IEN + 0x8);
787 	alchemy_gpic_pmdata[3] = __raw_readl(base + AU1300_GPIC_IEN + 0xc);
788 
789 	/* save misc register(s) */
790 	alchemy_gpic_pmdata[4] = __raw_readl(base + AU1300_GPIC_DMASEL);
791 
792 	/* molto silenzioso */
793 	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
794 	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
795 	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
796 	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
797 	wmb();
798 
799 	/* save pin/int-type configuration */
800 	base += AU1300_GPIC_PINCFG;
801 	for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
802 		alchemy_gpic_pmdata[i + 5] = __raw_readl(base + (i << 2));
803 
804 	wmb();
805 
806 	return 0;
807 }
808 
809 static void alchemy_gpic_resume(void)
810 {
811 	void __iomem *base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
812 	int i;
813 
814 	/* disable all first */
815 	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x0);
816 	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x4);
817 	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0x8);
818 	__raw_writel(~0UL, base + AU1300_GPIC_IDIS + 0xc);
819 	wmb();
820 
821 	/* restore pin/int-type configurations */
822 	base += AU1300_GPIC_PINCFG;
823 	for (i = 0; i < ALCHEMY_GPIC_INT_NUM; i++)
824 		__raw_writel(alchemy_gpic_pmdata[i + 5], base + (i << 2));
825 	wmb();
826 
827 	/* restore misc register(s) */
828 	base = (void __iomem *)KSEG1ADDR(AU1300_GPIC_PHYS_ADDR);
829 	__raw_writel(alchemy_gpic_pmdata[4], base + AU1300_GPIC_DMASEL);
830 	wmb();
831 
832 	/* finally restore masks */
833 	__raw_writel(alchemy_gpic_pmdata[0], base + AU1300_GPIC_IEN + 0x0);
834 	__raw_writel(alchemy_gpic_pmdata[1], base + AU1300_GPIC_IEN + 0x4);
835 	__raw_writel(alchemy_gpic_pmdata[2], base + AU1300_GPIC_IEN + 0x8);
836 	__raw_writel(alchemy_gpic_pmdata[3], base + AU1300_GPIC_IEN + 0xc);
837 	wmb();
838 }
839 
840 static struct syscore_ops alchemy_ic_pmops = {
841 	.suspend	= alchemy_ic_suspend,
842 	.resume		= alchemy_ic_resume,
843 };
844 
845 static struct syscore_ops alchemy_gpic_pmops = {
846 	.suspend	= alchemy_gpic_suspend,
847 	.resume		= alchemy_gpic_resume,
848 };
849 
850 /******************************************************************************/
851 
852 /* create chained handlers for the 4 IC requests to the MIPS IRQ ctrl */
853 #define DISP(name, base, addr)						      \
854 static void au1000_##name##_dispatch(struct irq_desc *d)		      \
855 {									      \
856 	unsigned long r = __raw_readl((void __iomem *)KSEG1ADDR(addr));	      \
857 	if (likely(r))							      \
858 		generic_handle_irq(base + __ffs(r));			      \
859 	else								      \
860 		spurious_interrupt();					      \
861 }
862 
863 DISP(ic0r0, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ0INT)
864 DISP(ic0r1, AU1000_INTC0_INT_BASE, AU1000_IC0_PHYS_ADDR + IC_REQ1INT)
865 DISP(ic1r0, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ0INT)
866 DISP(ic1r1, AU1000_INTC1_INT_BASE, AU1000_IC1_PHYS_ADDR + IC_REQ1INT)
867 
868 static void alchemy_gpic_dispatch(struct irq_desc *d)
869 {
870 	int i = __raw_readl(AU1300_GPIC_ADDR + AU1300_GPIC_PRIENC);
871 	generic_handle_irq(ALCHEMY_GPIC_INT_BASE + i);
872 }
873 
874 /******************************************************************************/
875 
876 static void __init au1000_init_irq(struct alchemy_irqmap *map)
877 {
878 	unsigned int bit, irq_nr;
879 	void __iomem *base;
880 
881 	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR));
882 	ic_init((void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR));
883 	register_syscore_ops(&alchemy_ic_pmops);
884 	mips_cpu_irq_init();
885 
886 	/* register all 64 possible IC0+IC1 irq sources as type "none".
887 	 * Use set_irq_type() to set edge/level behaviour at runtime.
888 	 */
889 	for (irq_nr = AU1000_INTC0_INT_BASE;
890 	     (irq_nr < AU1000_INTC0_INT_BASE + 32); irq_nr++)
891 		au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
892 
893 	for (irq_nr = AU1000_INTC1_INT_BASE;
894 	     (irq_nr < AU1000_INTC1_INT_BASE + 32); irq_nr++)
895 		au1x_ic_settype(irq_get_irq_data(irq_nr), IRQ_TYPE_NONE);
896 
897 	/*
898 	 * Initialize IC0, which is fixed per processor.
899 	 */
900 	while (map->irq != -1) {
901 		irq_nr = map->irq;
902 
903 		if (irq_nr >= AU1000_INTC1_INT_BASE) {
904 			bit = irq_nr - AU1000_INTC1_INT_BASE;
905 			base = (void __iomem *)KSEG1ADDR(AU1000_IC1_PHYS_ADDR);
906 		} else {
907 			bit = irq_nr - AU1000_INTC0_INT_BASE;
908 			base = (void __iomem *)KSEG1ADDR(AU1000_IC0_PHYS_ADDR);
909 		}
910 		if (map->prio == 0)
911 			__raw_writel(1 << bit, base + IC_ASSIGNSET);
912 
913 		au1x_ic_settype(irq_get_irq_data(irq_nr), map->type);
914 		++map;
915 	}
916 
917 	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, au1000_ic0r0_dispatch);
918 	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, au1000_ic0r1_dispatch);
919 	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, au1000_ic1r0_dispatch);
920 	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, au1000_ic1r1_dispatch);
921 }
922 
923 static void __init alchemy_gpic_init_irq(const struct alchemy_irqmap *dints)
924 {
925 	int i;
926 	void __iomem *bank_base;
927 
928 	register_syscore_ops(&alchemy_gpic_pmops);
929 	mips_cpu_irq_init();
930 
931 	/* disable & ack all possible interrupt sources */
932 	for (i = 0; i < 4; i++) {
933 		bank_base = AU1300_GPIC_ADDR + (i * 4);
934 		__raw_writel(~0UL, bank_base + AU1300_GPIC_IDIS);
935 		wmb();
936 		__raw_writel(~0UL, bank_base + AU1300_GPIC_IPEND);
937 		wmb();
938 	}
939 
940 	/* register an irq_chip for them, with 2nd highest priority */
941 	for (i = ALCHEMY_GPIC_INT_BASE; i <= ALCHEMY_GPIC_INT_LAST; i++) {
942 		au1300_set_irq_priority(i, 1);
943 		au1300_gpic_settype(irq_get_irq_data(i), IRQ_TYPE_NONE);
944 	}
945 
946 	/* setup known on-chip sources */
947 	while ((i = dints->irq) != -1) {
948 		au1300_gpic_settype(irq_get_irq_data(i), dints->type);
949 		au1300_set_irq_priority(i, dints->prio);
950 
951 		if (dints->internal)
952 			au1300_pinfunc_to_dev(i - ALCHEMY_GPIC_INT_BASE);
953 
954 		dints++;
955 	}
956 
957 	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 2, alchemy_gpic_dispatch);
958 	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 3, alchemy_gpic_dispatch);
959 	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 4, alchemy_gpic_dispatch);
960 	irq_set_chained_handler(MIPS_CPU_IRQ_BASE + 5, alchemy_gpic_dispatch);
961 }
962 
963 /******************************************************************************/
964 
965 void __init arch_init_irq(void)
966 {
967 	switch (alchemy_get_cputype()) {
968 	case ALCHEMY_CPU_AU1000:
969 		au1000_init_irq(au1000_irqmap);
970 		break;
971 	case ALCHEMY_CPU_AU1500:
972 		au1000_init_irq(au1500_irqmap);
973 		break;
974 	case ALCHEMY_CPU_AU1100:
975 		au1000_init_irq(au1100_irqmap);
976 		break;
977 	case ALCHEMY_CPU_AU1550:
978 		au1000_init_irq(au1550_irqmap);
979 		break;
980 	case ALCHEMY_CPU_AU1200:
981 		au1000_init_irq(au1200_irqmap);
982 		break;
983 	case ALCHEMY_CPU_AU1300:
984 		alchemy_gpic_init_irq(au1300_irqmap);
985 		break;
986 	default:
987 		pr_err("unknown Alchemy IRQ core\n");
988 		break;
989 	}
990 }
991 
992 asmlinkage void plat_irq_dispatch(void)
993 {
994 	unsigned long r = (read_c0_status() & read_c0_cause()) >> 8;
995 	do_IRQ(MIPS_CPU_IRQ_BASE + __ffs(r & 0xff));
996 }
997