xref: /openbmc/linux/arch/microblaze/include/asm/page.h (revision 71de0a05)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * VM ops
4  *
5  * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
6  * Copyright (C) 2008-2009 PetaLogix
7  * Copyright (C) 2006 Atmark Techno, Inc.
8  * Changes for MMU support:
9  *    Copyright (C) 2007 Xilinx, Inc.  All rights reserved.
10  */
11 
12 #ifndef _ASM_MICROBLAZE_PAGE_H
13 #define _ASM_MICROBLAZE_PAGE_H
14 
15 #include <linux/pfn.h>
16 #include <asm/setup.h>
17 #include <asm/asm-compat.h>
18 #include <linux/const.h>
19 
20 #ifdef __KERNEL__
21 
22 /* PAGE_SHIFT determines the page size */
23 #define PAGE_SHIFT		12
24 #define PAGE_SIZE	(ASM_CONST(1) << PAGE_SHIFT)
25 #define PAGE_MASK	(~(PAGE_SIZE-1))
26 
27 #define LOAD_OFFSET	ASM_CONST((CONFIG_KERNEL_START-CONFIG_KERNEL_BASE_ADDR))
28 
29 #define PTE_SHIFT	(PAGE_SHIFT - 2)	/* 1024 ptes per page */
30 
31 #ifndef __ASSEMBLY__
32 
33 /* MS be sure that SLAB allocates aligned objects */
34 #define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
35 
36 #define ARCH_SLAB_MINALIGN	L1_CACHE_BYTES
37 
38 /*
39  * PAGE_OFFSET -- the first address of the first page of memory. With MMU
40  * it is set to the kernel start address (aligned on a page boundary).
41  *
42  * CONFIG_KERNEL_START is defined in arch/microblaze/config.in and used
43  * in arch/microblaze/Makefile.
44  */
45 #define PAGE_OFFSET	CONFIG_KERNEL_START
46 
47 /*
48  * The basic type of a PTE - 32 bit physical addressing.
49  */
50 typedef unsigned long pte_basic_t;
51 #define PTE_FMT		"%.8lx"
52 
53 # define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
54 # define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
55 
56 # define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)
57 # define copy_user_page(vto, vfrom, vaddr, topg) \
58 			memcpy((vto), (vfrom), PAGE_SIZE)
59 
60 /*
61  * These are used to make use of C type-checking..
62  */
63 typedef struct page *pgtable_t;
64 typedef struct { unsigned long	pte; }		pte_t;
65 typedef struct { unsigned long	pgprot; }	pgprot_t;
66 /* FIXME this can depend on linux kernel version */
67 typedef struct { unsigned long pgd; } pgd_t;
68 
69 # define pte_val(x)	((x).pte)
70 # define pgprot_val(x)	((x).pgprot)
71 
72 #   define pgd_val(x)      ((x).pgd)
73 
74 # define __pte(x)	((pte_t) { (x) })
75 # define __pgd(x)	((pgd_t) { (x) })
76 # define __pgprot(x)	((pgprot_t) { (x) })
77 
78 /**
79  * Conversions for virtual address, physical address, pfn, and struct
80  * page are defined in the following files.
81  *
82  * virt -+
83  *	 | asm-microblaze/page.h
84  * phys -+
85  *	 | linux/pfn.h
86  *  pfn -+
87  *	 | asm-generic/memory_model.h
88  * page -+
89  *
90  */
91 
92 extern unsigned long max_low_pfn;
93 extern unsigned long min_low_pfn;
94 extern unsigned long max_pfn;
95 
96 extern unsigned long memory_start;
97 extern unsigned long memory_size;
98 extern unsigned long lowmem_size;
99 
100 extern unsigned long kernel_tlb;
101 
102 extern int page_is_ram(unsigned long pfn);
103 
104 # define phys_to_pfn(phys)	(PFN_DOWN(phys))
105 # define pfn_to_phys(pfn)	(PFN_PHYS(pfn))
106 
107 # define virt_to_pfn(vaddr)	(phys_to_pfn((__pa(vaddr))))
108 # define pfn_to_virt(pfn)	__va(pfn_to_phys((pfn)))
109 
110 #  define virt_to_page(kaddr)	(pfn_to_page(__pa(kaddr) >> PAGE_SHIFT))
111 #  define page_to_virt(page)   __va(page_to_pfn(page) << PAGE_SHIFT)
112 #  define page_to_phys(page)     (page_to_pfn(page) << PAGE_SHIFT)
113 
114 #  define ARCH_PFN_OFFSET	(memory_start >> PAGE_SHIFT)
115 # endif /* __ASSEMBLY__ */
116 
117 #define	virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
118 
119 # define __pa(x)	__virt_to_phys((unsigned long)(x))
120 # define __va(x)	((void *)__phys_to_virt((unsigned long)(x)))
121 
122 /* Convert between virtual and physical address for MMU. */
123 /* Handle MicroBlaze processor with virtual memory. */
124 #define __virt_to_phys(addr) \
125 	((addr) + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
126 #define __phys_to_virt(addr) \
127 	((addr) + CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
128 #define tophys(rd, rs) \
129 	addik rd, rs, (CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
130 #define tovirt(rd, rs) \
131 	addik rd, rs, (CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
132 
133 #define TOPHYS(addr)  __virt_to_phys(addr)
134 
135 #endif /* __KERNEL__ */
136 
137 #include <asm-generic/memory_model.h>
138 #include <asm-generic/getorder.h>
139 
140 #endif /* _ASM_MICROBLAZE_PAGE_H */
141