xref: /openbmc/linux/arch/microblaze/Makefile (revision 65ee8aeb) 
1KBUILD_DEFCONFIG := mmu_defconfig
2
3ifeq ($(CONFIG_MMU),y)
4UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
5else
6UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
7endif
8
9# What CPU vesion are we building for, and crack it open
10# as major.minor.rev
11CPU_VER   := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER))
12CPU_MAJOR := $(shell echo $(CPU_VER) | cut -d '.' -f 1)
13CPU_MINOR := $(shell echo $(CPU_VER) | cut -d '.' -f 2)
14CPU_REV   := $(shell echo $(CPU_VER) | cut -d '.' -f 3)
15
16export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
17
18# Use cpu-related CONFIG_ vars to set compile options.
19# The various CONFIG_XILINX cpu features options are integers 0/1/2...
20# rather than bools y/n
21
22# Work out HW multipler support. This is tricky.
23# 1. Spartan2 has no HW multipliers.
24# 2. MicroBlaze v3.x always uses them, except in Spartan 2
25# 3. All other FPGa/CPU ver combos, we can trust the CONFIG_ settings
26ifeq (,$(findstring spartan2,$(CONFIG_XILINX_MICROBLAZE0_FAMILY)))
27  ifeq ($(CPU_MAJOR),3)
28    CPUFLAGS-1 += -mno-xl-soft-mul
29  else
30    # USE_HW_MUL can be 0, 1, or 2, defining a hierarchy of HW Mul support.
31    CPUFLAGS-$(subst 1,,$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL)) += -mxl-multiply-high
32    CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL) += -mno-xl-soft-mul
33  endif
34endif
35CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
36CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
37CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
38
39CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
40
41# r31 holds current when in kernel mode
42KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
43
44LDFLAGS		:=
45LDFLAGS_vmlinux	:=
46
47head-y := arch/microblaze/kernel/head.o
48libs-y += arch/microblaze/lib/
49core-y += arch/microblaze/kernel/
50core-y += arch/microblaze/mm/
51core-$(CONFIG_PCI) += arch/microblaze/pci/
52
53drivers-$(CONFIG_OPROFILE) += arch/microblaze/oprofile/
54
55boot := arch/microblaze/boot
56
57# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
58DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
59
60ifneq ($(DTB),)
61	core-y	+= $(boot)/dts/
62endif
63
64# defines filename extension depending memory management type
65ifeq ($(CONFIG_MMU),)
66MMU := -nommu
67endif
68
69export MMU DTB
70
71all: linux.bin
72
73archclean:
74	$(Q)$(MAKE) $(clean)=$(boot)
75
76linux.bin linux.bin.gz linux.bin.ub: vmlinux
77	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
78
79simpleImage.%: vmlinux
80	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
81
82define archhelp
83  echo '* linux.bin    - Create raw binary'
84  echo '  linux.bin.gz - Create compressed raw binary'
85  echo '  linux.bin.ub - Create U-Boot wrapped raw binary'
86  echo '  simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
87  echo '                   - stripped elf with fdt blob'
88  echo '  simpleImage.<dt>.unstrip - full ELF image with fdt blob'
89  echo '  *_defconfig      - Select default config from arch/microblaze/configs'
90  echo ''
91  echo '  Targets with <dt> embed a device tree blob inside the image'
92  echo '  These targets support board with firmware that does not'
93  echo '  support passing a device tree directly. Replace <dt> with the'
94  echo '  name of a dts file from the arch/microblaze/boot/dts/ directory'
95  echo '  (minus the .dts extension).'
96endef
97
98MRPROPER_FILES += $(boot)/simpleImage.*
99