xref: /openbmc/linux/arch/m68k/mm/memory.c (revision 827634ad)
1 /*
2  *  linux/arch/m68k/mm/memory.c
3  *
4  *  Copyright (C) 1995  Hamish Macdonald
5  */
6 
7 #include <linux/module.h>
8 #include <linux/mm.h>
9 #include <linux/kernel.h>
10 #include <linux/string.h>
11 #include <linux/types.h>
12 #include <linux/init.h>
13 #include <linux/pagemap.h>
14 #include <linux/gfp.h>
15 
16 #include <asm/setup.h>
17 #include <asm/segment.h>
18 #include <asm/page.h>
19 #include <asm/pgalloc.h>
20 #include <asm/traps.h>
21 #include <asm/machdep.h>
22 
23 
24 /* ++andreas: {get,free}_pointer_table rewritten to use unused fields from
25    struct page instead of separately kmalloced struct.  Stolen from
26    arch/sparc/mm/srmmu.c ... */
27 
28 typedef struct list_head ptable_desc;
29 static LIST_HEAD(ptable_list);
30 
31 #define PD_PTABLE(page) ((ptable_desc *)&(virt_to_page(page)->lru))
32 #define PD_PAGE(ptable) (list_entry(ptable, struct page, lru))
33 #define PD_MARKBITS(dp) (*(unsigned char *)&PD_PAGE(dp)->index)
34 
35 #define PTABLE_SIZE (PTRS_PER_PMD * sizeof(pmd_t))
36 
37 void __init init_pointer_table(unsigned long ptable)
38 {
39 	ptable_desc *dp;
40 	unsigned long page = ptable & PAGE_MASK;
41 	unsigned char mask = 1 << ((ptable - page)/PTABLE_SIZE);
42 
43 	dp = PD_PTABLE(page);
44 	if (!(PD_MARKBITS(dp) & mask)) {
45 		PD_MARKBITS(dp) = 0xff;
46 		list_add(dp, &ptable_list);
47 	}
48 
49 	PD_MARKBITS(dp) &= ~mask;
50 #ifdef DEBUG
51 	printk("init_pointer_table: %lx, %x\n", ptable, PD_MARKBITS(dp));
52 #endif
53 
54 	/* unreserve the page so it's possible to free that page */
55 	PD_PAGE(dp)->flags &= ~(1 << PG_reserved);
56 	init_page_count(PD_PAGE(dp));
57 
58 	return;
59 }
60 
61 pmd_t *get_pointer_table (void)
62 {
63 	ptable_desc *dp = ptable_list.next;
64 	unsigned char mask = PD_MARKBITS (dp);
65 	unsigned char tmp;
66 	unsigned int off;
67 
68 	/*
69 	 * For a pointer table for a user process address space, a
70 	 * table is taken from a page allocated for the purpose.  Each
71 	 * page can hold 8 pointer tables.  The page is remapped in
72 	 * virtual address space to be noncacheable.
73 	 */
74 	if (mask == 0) {
75 		void *page;
76 		ptable_desc *new;
77 
78 		if (!(page = (void *)get_zeroed_page(GFP_KERNEL)))
79 			return NULL;
80 
81 		flush_tlb_kernel_page(page);
82 		nocache_page(page);
83 
84 		new = PD_PTABLE(page);
85 		PD_MARKBITS(new) = 0xfe;
86 		list_add_tail(new, dp);
87 
88 		return (pmd_t *)page;
89 	}
90 
91 	for (tmp = 1, off = 0; (mask & tmp) == 0; tmp <<= 1, off += PTABLE_SIZE)
92 		;
93 	PD_MARKBITS(dp) = mask & ~tmp;
94 	if (!PD_MARKBITS(dp)) {
95 		/* move to end of list */
96 		list_move_tail(dp, &ptable_list);
97 	}
98 	return (pmd_t *) (page_address(PD_PAGE(dp)) + off);
99 }
100 
101 int free_pointer_table (pmd_t *ptable)
102 {
103 	ptable_desc *dp;
104 	unsigned long page = (unsigned long)ptable & PAGE_MASK;
105 	unsigned char mask = 1 << (((unsigned long)ptable - page)/PTABLE_SIZE);
106 
107 	dp = PD_PTABLE(page);
108 	if (PD_MARKBITS (dp) & mask)
109 		panic ("table already free!");
110 
111 	PD_MARKBITS (dp) |= mask;
112 
113 	if (PD_MARKBITS(dp) == 0xff) {
114 		/* all tables in page are free, free page */
115 		list_del(dp);
116 		cache_page((void *)page);
117 		free_page (page);
118 		return 1;
119 	} else if (ptable_list.next != dp) {
120 		/*
121 		 * move this descriptor to the front of the list, since
122 		 * it has one or more free tables.
123 		 */
124 		list_move(dp, &ptable_list);
125 	}
126 	return 0;
127 }
128 
129 /* invalidate page in both caches */
130 static inline void clear040(unsigned long paddr)
131 {
132 	asm volatile (
133 		"nop\n\t"
134 		".chip 68040\n\t"
135 		"cinvp %%bc,(%0)\n\t"
136 		".chip 68k"
137 		: : "a" (paddr));
138 }
139 
140 /* invalidate page in i-cache */
141 static inline void cleari040(unsigned long paddr)
142 {
143 	asm volatile (
144 		"nop\n\t"
145 		".chip 68040\n\t"
146 		"cinvp %%ic,(%0)\n\t"
147 		".chip 68k"
148 		: : "a" (paddr));
149 }
150 
151 /* push page in both caches */
152 /* RZ: cpush %bc DOES invalidate %ic, regardless of DPI */
153 static inline void push040(unsigned long paddr)
154 {
155 	asm volatile (
156 		"nop\n\t"
157 		".chip 68040\n\t"
158 		"cpushp %%bc,(%0)\n\t"
159 		".chip 68k"
160 		: : "a" (paddr));
161 }
162 
163 /* push and invalidate page in both caches, must disable ints
164  * to avoid invalidating valid data */
165 static inline void pushcl040(unsigned long paddr)
166 {
167 	unsigned long flags;
168 
169 	local_irq_save(flags);
170 	push040(paddr);
171 	if (CPU_IS_060)
172 		clear040(paddr);
173 	local_irq_restore(flags);
174 }
175 
176 /*
177  * 040: Hit every page containing an address in the range paddr..paddr+len-1.
178  * (Low order bits of the ea of a CINVP/CPUSHP are "don't care"s).
179  * Hit every page until there is a page or less to go. Hit the next page,
180  * and the one after that if the range hits it.
181  */
182 /* ++roman: A little bit more care is required here: The CINVP instruction
183  * invalidates cache entries WITHOUT WRITING DIRTY DATA BACK! So the beginning
184  * and the end of the region must be treated differently if they are not
185  * exactly at the beginning or end of a page boundary. Else, maybe too much
186  * data becomes invalidated and thus lost forever. CPUSHP does what we need:
187  * it invalidates the page after pushing dirty data to memory. (Thanks to Jes
188  * for discovering the problem!)
189  */
190 /* ... but on the '060, CPUSH doesn't invalidate (for us, since we have set
191  * the DPI bit in the CACR; would it cause problems with temporarily changing
192  * this?). So we have to push first and then additionally to invalidate.
193  */
194 
195 
196 /*
197  * cache_clear() semantics: Clear any cache entries for the area in question,
198  * without writing back dirty entries first. This is useful if the data will
199  * be overwritten anyway, e.g. by DMA to memory. The range is defined by a
200  * _physical_ address.
201  */
202 
203 void cache_clear (unsigned long paddr, int len)
204 {
205     if (CPU_IS_COLDFIRE) {
206 	clear_cf_bcache(0, DCACHE_MAX_ADDR);
207     } else if (CPU_IS_040_OR_060) {
208 	int tmp;
209 
210 	/*
211 	 * We need special treatment for the first page, in case it
212 	 * is not page-aligned. Page align the addresses to work
213 	 * around bug I17 in the 68060.
214 	 */
215 	if ((tmp = -paddr & (PAGE_SIZE - 1))) {
216 	    pushcl040(paddr & PAGE_MASK);
217 	    if ((len -= tmp) <= 0)
218 		return;
219 	    paddr += tmp;
220 	}
221 	tmp = PAGE_SIZE;
222 	paddr &= PAGE_MASK;
223 	while ((len -= tmp) >= 0) {
224 	    clear040(paddr);
225 	    paddr += tmp;
226 	}
227 	if ((len += tmp))
228 	    /* a page boundary gets crossed at the end */
229 	    pushcl040(paddr);
230     }
231     else /* 68030 or 68020 */
232 	asm volatile ("movec %/cacr,%/d0\n\t"
233 		      "oriw %0,%/d0\n\t"
234 		      "movec %/d0,%/cacr"
235 		      : : "i" (FLUSH_I_AND_D)
236 		      : "d0");
237 #ifdef CONFIG_M68K_L2_CACHE
238     if(mach_l2_flush)
239 	mach_l2_flush(0);
240 #endif
241 }
242 EXPORT_SYMBOL(cache_clear);
243 
244 
245 /*
246  * cache_push() semantics: Write back any dirty cache data in the given area,
247  * and invalidate the range in the instruction cache. It needs not (but may)
248  * invalidate those entries also in the data cache. The range is defined by a
249  * _physical_ address.
250  */
251 
252 void cache_push (unsigned long paddr, int len)
253 {
254     if (CPU_IS_COLDFIRE) {
255 	flush_cf_bcache(0, DCACHE_MAX_ADDR);
256     } else if (CPU_IS_040_OR_060) {
257 	int tmp = PAGE_SIZE;
258 
259 	/*
260          * on 68040 or 68060, push cache lines for pages in the range;
261 	 * on the '040 this also invalidates the pushed lines, but not on
262 	 * the '060!
263 	 */
264 	len += paddr & (PAGE_SIZE - 1);
265 
266 	/*
267 	 * Work around bug I17 in the 68060 affecting some instruction
268 	 * lines not being invalidated properly.
269 	 */
270 	paddr &= PAGE_MASK;
271 
272 	do {
273 	    push040(paddr);
274 	    paddr += tmp;
275 	} while ((len -= tmp) > 0);
276     }
277     /*
278      * 68030/68020 have no writeback cache. On the other hand,
279      * cache_push is actually a superset of cache_clear (the lines
280      * get written back and invalidated), so we should make sure
281      * to perform the corresponding actions. After all, this is getting
282      * called in places where we've just loaded code, or whatever, so
283      * flushing the icache is appropriate; flushing the dcache shouldn't
284      * be required.
285      */
286     else /* 68030 or 68020 */
287 	asm volatile ("movec %/cacr,%/d0\n\t"
288 		      "oriw %0,%/d0\n\t"
289 		      "movec %/d0,%/cacr"
290 		      : : "i" (FLUSH_I)
291 		      : "d0");
292 #ifdef CONFIG_M68K_L2_CACHE
293     if(mach_l2_flush)
294 	mach_l2_flush(1);
295 #endif
296 }
297 EXPORT_SYMBOL(cache_push);
298 
299