xref: /openbmc/linux/arch/m68k/mm/fault.c (revision f7777dcc)
1 /*
2  *  linux/arch/m68k/mm/fault.c
3  *
4  *  Copyright (C) 1995  Hamish Macdonald
5  */
6 
7 #include <linux/mman.h>
8 #include <linux/mm.h>
9 #include <linux/kernel.h>
10 #include <linux/ptrace.h>
11 #include <linux/interrupt.h>
12 #include <linux/module.h>
13 
14 #include <asm/setup.h>
15 #include <asm/traps.h>
16 #include <asm/uaccess.h>
17 #include <asm/pgalloc.h>
18 
19 extern void die_if_kernel(char *, struct pt_regs *, long);
20 
21 int send_fault_sig(struct pt_regs *regs)
22 {
23 	siginfo_t siginfo = { 0, 0, 0, };
24 
25 	siginfo.si_signo = current->thread.signo;
26 	siginfo.si_code = current->thread.code;
27 	siginfo.si_addr = (void *)current->thread.faddr;
28 #ifdef DEBUG
29 	printk("send_fault_sig: %p,%d,%d\n", siginfo.si_addr, siginfo.si_signo, siginfo.si_code);
30 #endif
31 
32 	if (user_mode(regs)) {
33 		force_sig_info(siginfo.si_signo,
34 			       &siginfo, current);
35 	} else {
36 		if (handle_kernel_fault(regs))
37 			return -1;
38 
39 		//if (siginfo.si_signo == SIGBUS)
40 		//	force_sig_info(siginfo.si_signo,
41 		//		       &siginfo, current);
42 
43 		/*
44 		 * Oops. The kernel tried to access some bad page. We'll have to
45 		 * terminate things with extreme prejudice.
46 		 */
47 		if ((unsigned long)siginfo.si_addr < PAGE_SIZE)
48 			printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference");
49 		else
50 			printk(KERN_ALERT "Unable to handle kernel access");
51 		printk(" at virtual address %p\n", siginfo.si_addr);
52 		die_if_kernel("Oops", regs, 0 /*error_code*/);
53 		do_exit(SIGKILL);
54 	}
55 
56 	return 1;
57 }
58 
59 /*
60  * This routine handles page faults.  It determines the problem, and
61  * then passes it off to one of the appropriate routines.
62  *
63  * error_code:
64  *	bit 0 == 0 means no page found, 1 means protection fault
65  *	bit 1 == 0 means read, 1 means write
66  *
67  * If this routine detects a bad access, it returns 1, otherwise it
68  * returns 0.
69  */
70 int do_page_fault(struct pt_regs *regs, unsigned long address,
71 			      unsigned long error_code)
72 {
73 	struct mm_struct *mm = current->mm;
74 	struct vm_area_struct * vma;
75 	int fault;
76 	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
77 
78 #ifdef DEBUG
79 	printk ("do page fault:\nregs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld, %p\n",
80 		regs->sr, regs->pc, address, error_code,
81 		current->mm->pgd);
82 #endif
83 
84 	/*
85 	 * If we're in an interrupt or have no user
86 	 * context, we must not take the fault..
87 	 */
88 	if (in_atomic() || !mm)
89 		goto no_context;
90 
91 	if (user_mode(regs))
92 		flags |= FAULT_FLAG_USER;
93 retry:
94 	down_read(&mm->mmap_sem);
95 
96 	vma = find_vma(mm, address);
97 	if (!vma)
98 		goto map_err;
99 	if (vma->vm_flags & VM_IO)
100 		goto acc_err;
101 	if (vma->vm_start <= address)
102 		goto good_area;
103 	if (!(vma->vm_flags & VM_GROWSDOWN))
104 		goto map_err;
105 	if (user_mode(regs)) {
106 		/* Accessing the stack below usp is always a bug.  The
107 		   "+ 256" is there due to some instructions doing
108 		   pre-decrement on the stack and that doesn't show up
109 		   until later.  */
110 		if (address + 256 < rdusp())
111 			goto map_err;
112 	}
113 	if (expand_stack(vma, address))
114 		goto map_err;
115 
116 /*
117  * Ok, we have a good vm_area for this memory access, so
118  * we can handle it..
119  */
120 good_area:
121 #ifdef DEBUG
122 	printk("do_page_fault: good_area\n");
123 #endif
124 	switch (error_code & 3) {
125 		default:	/* 3: write, present */
126 			/* fall through */
127 		case 2:		/* write, not present */
128 			if (!(vma->vm_flags & VM_WRITE))
129 				goto acc_err;
130 			flags |= FAULT_FLAG_WRITE;
131 			break;
132 		case 1:		/* read, present */
133 			goto acc_err;
134 		case 0:		/* read, not present */
135 			if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
136 				goto acc_err;
137 	}
138 
139 	/*
140 	 * If for any reason at all we couldn't handle the fault,
141 	 * make sure we exit gracefully rather than endlessly redo
142 	 * the fault.
143 	 */
144 
145 	fault = handle_mm_fault(mm, vma, address, flags);
146 #ifdef DEBUG
147 	printk("handle_mm_fault returns %d\n",fault);
148 #endif
149 
150 	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
151 		return 0;
152 
153 	if (unlikely(fault & VM_FAULT_ERROR)) {
154 		if (fault & VM_FAULT_OOM)
155 			goto out_of_memory;
156 		else if (fault & VM_FAULT_SIGBUS)
157 			goto bus_err;
158 		BUG();
159 	}
160 
161 	/*
162 	 * Major/minor page fault accounting is only done on the
163 	 * initial attempt. If we go through a retry, it is extremely
164 	 * likely that the page will be found in page cache at that point.
165 	 */
166 	if (flags & FAULT_FLAG_ALLOW_RETRY) {
167 		if (fault & VM_FAULT_MAJOR)
168 			current->maj_flt++;
169 		else
170 			current->min_flt++;
171 		if (fault & VM_FAULT_RETRY) {
172 			/* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
173 			 * of starvation. */
174 			flags &= ~FAULT_FLAG_ALLOW_RETRY;
175 			flags |= FAULT_FLAG_TRIED;
176 
177 			/*
178 			 * No need to up_read(&mm->mmap_sem) as we would
179 			 * have already released it in __lock_page_or_retry
180 			 * in mm/filemap.c.
181 			 */
182 
183 			goto retry;
184 		}
185 	}
186 
187 	up_read(&mm->mmap_sem);
188 	return 0;
189 
190 /*
191  * We ran out of memory, or some other thing happened to us that made
192  * us unable to handle the page fault gracefully.
193  */
194 out_of_memory:
195 	up_read(&mm->mmap_sem);
196 	if (!user_mode(regs))
197 		goto no_context;
198 	pagefault_out_of_memory();
199 	return 0;
200 
201 no_context:
202 	current->thread.signo = SIGBUS;
203 	current->thread.faddr = address;
204 	return send_fault_sig(regs);
205 
206 bus_err:
207 	current->thread.signo = SIGBUS;
208 	current->thread.code = BUS_ADRERR;
209 	current->thread.faddr = address;
210 	goto send_sig;
211 
212 map_err:
213 	current->thread.signo = SIGSEGV;
214 	current->thread.code = SEGV_MAPERR;
215 	current->thread.faddr = address;
216 	goto send_sig;
217 
218 acc_err:
219 	current->thread.signo = SIGSEGV;
220 	current->thread.code = SEGV_ACCERR;
221 	current->thread.faddr = address;
222 
223 send_sig:
224 	up_read(&mm->mmap_sem);
225 	return send_fault_sig(regs);
226 }
227