xref: /openbmc/linux/arch/m68k/mm/fault.c (revision 133f9794)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  *  linux/arch/m68k/mm/fault.c
4  *
5  *  Copyright (C) 1995  Hamish Macdonald
6  */
7 
8 #include <linux/mman.h>
9 #include <linux/mm.h>
10 #include <linux/kernel.h>
11 #include <linux/ptrace.h>
12 #include <linux/interrupt.h>
13 #include <linux/module.h>
14 #include <linux/uaccess.h>
15 
16 #include <asm/setup.h>
17 #include <asm/traps.h>
18 #include <asm/pgalloc.h>
19 
20 extern void die_if_kernel(char *, struct pt_regs *, long);
21 
22 int send_fault_sig(struct pt_regs *regs)
23 {
24 	siginfo_t siginfo;
25 
26 	clear_siginfo(&siginfo);
27 	siginfo.si_signo = current->thread.signo;
28 	siginfo.si_code = current->thread.code;
29 	siginfo.si_addr = (void *)current->thread.faddr;
30 	pr_debug("send_fault_sig: %p,%d,%d\n", siginfo.si_addr,
31 		 siginfo.si_signo, siginfo.si_code);
32 
33 	if (user_mode(regs)) {
34 		force_sig_info(siginfo.si_signo,
35 			       &siginfo, current);
36 	} else {
37 		if (fixup_exception(regs))
38 			return -1;
39 
40 		//if (siginfo.si_signo == SIGBUS)
41 		//	force_sig_info(siginfo.si_signo,
42 		//		       &siginfo, current);
43 
44 		/*
45 		 * Oops. The kernel tried to access some bad page. We'll have to
46 		 * terminate things with extreme prejudice.
47 		 */
48 		if ((unsigned long)siginfo.si_addr < PAGE_SIZE)
49 			pr_alert("Unable to handle kernel NULL pointer dereference");
50 		else
51 			pr_alert("Unable to handle kernel access");
52 		pr_cont(" at virtual address %p\n", siginfo.si_addr);
53 		die_if_kernel("Oops", regs, 0 /*error_code*/);
54 		do_exit(SIGKILL);
55 	}
56 
57 	return 1;
58 }
59 
60 /*
61  * This routine handles page faults.  It determines the problem, and
62  * then passes it off to one of the appropriate routines.
63  *
64  * error_code:
65  *	bit 0 == 0 means no page found, 1 means protection fault
66  *	bit 1 == 0 means read, 1 means write
67  *
68  * If this routine detects a bad access, it returns 1, otherwise it
69  * returns 0.
70  */
71 int do_page_fault(struct pt_regs *regs, unsigned long address,
72 			      unsigned long error_code)
73 {
74 	struct mm_struct *mm = current->mm;
75 	struct vm_area_struct * vma;
76 	int fault;
77 	unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
78 
79 	pr_debug("do page fault:\nregs->sr=%#x, regs->pc=%#lx, address=%#lx, %ld, %p\n",
80 		regs->sr, regs->pc, address, error_code, mm ? mm->pgd : NULL);
81 
82 	/*
83 	 * If we're in an interrupt or have no user
84 	 * context, we must not take the fault..
85 	 */
86 	if (faulthandler_disabled() || !mm)
87 		goto no_context;
88 
89 	if (user_mode(regs))
90 		flags |= FAULT_FLAG_USER;
91 retry:
92 	down_read(&mm->mmap_sem);
93 
94 	vma = find_vma(mm, address);
95 	if (!vma)
96 		goto map_err;
97 	if (vma->vm_flags & VM_IO)
98 		goto acc_err;
99 	if (vma->vm_start <= address)
100 		goto good_area;
101 	if (!(vma->vm_flags & VM_GROWSDOWN))
102 		goto map_err;
103 	if (user_mode(regs)) {
104 		/* Accessing the stack below usp is always a bug.  The
105 		   "+ 256" is there due to some instructions doing
106 		   pre-decrement on the stack and that doesn't show up
107 		   until later.  */
108 		if (address + 256 < rdusp())
109 			goto map_err;
110 	}
111 	if (expand_stack(vma, address))
112 		goto map_err;
113 
114 /*
115  * Ok, we have a good vm_area for this memory access, so
116  * we can handle it..
117  */
118 good_area:
119 	pr_debug("do_page_fault: good_area\n");
120 	switch (error_code & 3) {
121 		default:	/* 3: write, present */
122 			/* fall through */
123 		case 2:		/* write, not present */
124 			if (!(vma->vm_flags & VM_WRITE))
125 				goto acc_err;
126 			flags |= FAULT_FLAG_WRITE;
127 			break;
128 		case 1:		/* read, present */
129 			goto acc_err;
130 		case 0:		/* read, not present */
131 			if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))
132 				goto acc_err;
133 	}
134 
135 	/*
136 	 * If for any reason at all we couldn't handle the fault,
137 	 * make sure we exit gracefully rather than endlessly redo
138 	 * the fault.
139 	 */
140 
141 	fault = handle_mm_fault(vma, address, flags);
142 	pr_debug("handle_mm_fault returns %d\n", fault);
143 
144 	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
145 		return 0;
146 
147 	if (unlikely(fault & VM_FAULT_ERROR)) {
148 		if (fault & VM_FAULT_OOM)
149 			goto out_of_memory;
150 		else if (fault & VM_FAULT_SIGSEGV)
151 			goto map_err;
152 		else if (fault & VM_FAULT_SIGBUS)
153 			goto bus_err;
154 		BUG();
155 	}
156 
157 	/*
158 	 * Major/minor page fault accounting is only done on the
159 	 * initial attempt. If we go through a retry, it is extremely
160 	 * likely that the page will be found in page cache at that point.
161 	 */
162 	if (flags & FAULT_FLAG_ALLOW_RETRY) {
163 		if (fault & VM_FAULT_MAJOR)
164 			current->maj_flt++;
165 		else
166 			current->min_flt++;
167 		if (fault & VM_FAULT_RETRY) {
168 			/* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk
169 			 * of starvation. */
170 			flags &= ~FAULT_FLAG_ALLOW_RETRY;
171 			flags |= FAULT_FLAG_TRIED;
172 
173 			/*
174 			 * No need to up_read(&mm->mmap_sem) as we would
175 			 * have already released it in __lock_page_or_retry
176 			 * in mm/filemap.c.
177 			 */
178 
179 			goto retry;
180 		}
181 	}
182 
183 	up_read(&mm->mmap_sem);
184 	return 0;
185 
186 /*
187  * We ran out of memory, or some other thing happened to us that made
188  * us unable to handle the page fault gracefully.
189  */
190 out_of_memory:
191 	up_read(&mm->mmap_sem);
192 	if (!user_mode(regs))
193 		goto no_context;
194 	pagefault_out_of_memory();
195 	return 0;
196 
197 no_context:
198 	current->thread.signo = SIGBUS;
199 	current->thread.faddr = address;
200 	return send_fault_sig(regs);
201 
202 bus_err:
203 	current->thread.signo = SIGBUS;
204 	current->thread.code = BUS_ADRERR;
205 	current->thread.faddr = address;
206 	goto send_sig;
207 
208 map_err:
209 	current->thread.signo = SIGSEGV;
210 	current->thread.code = SEGV_MAPERR;
211 	current->thread.faddr = address;
212 	goto send_sig;
213 
214 acc_err:
215 	current->thread.signo = SIGSEGV;
216 	current->thread.code = SEGV_ACCERR;
217 	current->thread.faddr = address;
218 
219 send_sig:
220 	up_read(&mm->mmap_sem);
221 	return send_fault_sig(regs);
222 }
223