1 /* 2 * Operating System Services (OSS) chip handling 3 * Written by Joshua M. Thompson (funaho@jurai.org) 4 * 5 * 6 * This chip is used in the IIfx in place of VIA #2. It acts like a fancy 7 * VIA chip with prorammable interrupt levels. 8 * 9 * 990502 (jmt) - Major rewrite for new interrupt architecture as well as some 10 * recent insights into OSS operational details. 11 * 990610 (jmt) - Now taking full advantage of the OSS. Interrupts are mapped 12 * to mostly match the A/UX interrupt scheme supported on the 13 * VIA side. Also added support for enabling the ISM irq again 14 * since we now have a functional IOP manager. 15 */ 16 17 #include <linux/types.h> 18 #include <linux/kernel.h> 19 #include <linux/mm.h> 20 #include <linux/delay.h> 21 #include <linux/init.h> 22 #include <linux/irq.h> 23 24 #include <asm/macintosh.h> 25 #include <asm/macints.h> 26 #include <asm/mac_via.h> 27 #include <asm/mac_oss.h> 28 29 int oss_present; 30 volatile struct mac_oss *oss; 31 32 /* 33 * Initialize the OSS 34 * 35 * The OSS "detection" code is actually in via_init() which is always called 36 * before us. Thus we can count on oss_present being valid on entry. 37 */ 38 39 void __init oss_init(void) 40 { 41 int i; 42 43 if (!oss_present) return; 44 45 oss = (struct mac_oss *) OSS_BASE; 46 47 /* Disable all interrupts. Unlike a VIA it looks like we */ 48 /* do this by setting the source's interrupt level to zero. */ 49 50 for (i = 0; i < OSS_NUM_SOURCES; i++) 51 oss->irq_level[i] = 0; 52 } 53 54 /* 55 * Initialize OSS for Nubus access 56 */ 57 58 void __init oss_nubus_init(void) 59 { 60 } 61 62 /* 63 * Handle miscellaneous OSS interrupts. 64 */ 65 66 static void oss_irq(struct irq_desc *desc) 67 { 68 int events = oss->irq_pending & 69 (OSS_IP_IOPSCC | OSS_IP_SCSI | OSS_IP_IOPISM); 70 71 #ifdef DEBUG_IRQS 72 if ((console_loglevel == 10) && !(events & OSS_IP_SCSI)) { 73 unsigned int irq = irq_desc_get_irq(desc); 74 75 printk("oss_irq: irq %u events = 0x%04X\n", irq, 76 (int) oss->irq_pending); 77 } 78 #endif 79 80 if (events & OSS_IP_IOPSCC) { 81 oss->irq_pending &= ~OSS_IP_IOPSCC; 82 generic_handle_irq(IRQ_MAC_SCC); 83 } 84 85 if (events & OSS_IP_SCSI) { 86 oss->irq_pending &= ~OSS_IP_SCSI; 87 generic_handle_irq(IRQ_MAC_SCSI); 88 } 89 90 if (events & OSS_IP_IOPISM) { 91 oss->irq_pending &= ~OSS_IP_IOPISM; 92 generic_handle_irq(IRQ_MAC_ADB); 93 } 94 } 95 96 /* 97 * Nubus IRQ handler, OSS style 98 * 99 * Unlike the VIA/RBV this is on its own autovector interrupt level. 100 */ 101 102 static void oss_nubus_irq(struct irq_desc *desc) 103 { 104 int events, irq_bit, i; 105 106 events = oss->irq_pending & OSS_IP_NUBUS; 107 if (!events) 108 return; 109 110 #ifdef DEBUG_NUBUS_INT 111 if (console_loglevel > 7) { 112 printk("oss_nubus_irq: events = 0x%04X\n", events); 113 } 114 #endif 115 /* There are only six slots on the OSS, not seven */ 116 117 i = 6; 118 irq_bit = 0x40; 119 do { 120 --i; 121 irq_bit >>= 1; 122 if (events & irq_bit) { 123 oss->irq_pending &= ~irq_bit; 124 generic_handle_irq(NUBUS_SOURCE_BASE + i); 125 } 126 } while(events & (irq_bit - 1)); 127 } 128 129 /* 130 * Register the OSS and NuBus interrupt dispatchers. 131 * 132 * This IRQ mapping is laid out with two things in mind: first, we try to keep 133 * things on their own levels to avoid having to do double-dispatches. Second, 134 * the levels match as closely as possible the alternate IRQ mapping mode (aka 135 * "A/UX mode") available on some VIA machines. 136 */ 137 138 #define OSS_IRQLEV_IOPISM IRQ_AUTO_1 139 #define OSS_IRQLEV_SCSI IRQ_AUTO_2 140 #define OSS_IRQLEV_NUBUS IRQ_AUTO_3 141 #define OSS_IRQLEV_IOPSCC IRQ_AUTO_4 142 #define OSS_IRQLEV_VIA1 IRQ_AUTO_6 143 144 void __init oss_register_interrupts(void) 145 { 146 irq_set_chained_handler(OSS_IRQLEV_IOPISM, oss_irq); 147 irq_set_chained_handler(OSS_IRQLEV_SCSI, oss_irq); 148 irq_set_chained_handler(OSS_IRQLEV_NUBUS, oss_nubus_irq); 149 irq_set_chained_handler(OSS_IRQLEV_IOPSCC, oss_irq); 150 irq_set_chained_handler(OSS_IRQLEV_VIA1, via1_irq); 151 152 /* OSS_VIA1 gets enabled here because it has no machspec interrupt. */ 153 oss->irq_level[OSS_VIA1] = IRQ_AUTO_6; 154 } 155 156 /* 157 * Enable an OSS interrupt 158 * 159 * It looks messy but it's rather straightforward. The switch() statement 160 * just maps the machspec interrupt numbers to the right OSS interrupt 161 * source (if the OSS handles that interrupt) and then sets the interrupt 162 * level for that source to nonzero, thus enabling the interrupt. 163 */ 164 165 void oss_irq_enable(int irq) { 166 #ifdef DEBUG_IRQUSE 167 printk("oss_irq_enable(%d)\n", irq); 168 #endif 169 switch(irq) { 170 case IRQ_MAC_SCC: 171 oss->irq_level[OSS_IOPSCC] = OSS_IRQLEV_IOPSCC; 172 return; 173 case IRQ_MAC_ADB: 174 oss->irq_level[OSS_IOPISM] = OSS_IRQLEV_IOPISM; 175 return; 176 case IRQ_MAC_SCSI: 177 oss->irq_level[OSS_SCSI] = OSS_IRQLEV_SCSI; 178 return; 179 case IRQ_NUBUS_9: 180 case IRQ_NUBUS_A: 181 case IRQ_NUBUS_B: 182 case IRQ_NUBUS_C: 183 case IRQ_NUBUS_D: 184 case IRQ_NUBUS_E: 185 irq -= NUBUS_SOURCE_BASE; 186 oss->irq_level[irq] = OSS_IRQLEV_NUBUS; 187 return; 188 } 189 190 if (IRQ_SRC(irq) == 1) 191 via_irq_enable(irq); 192 } 193 194 /* 195 * Disable an OSS interrupt 196 * 197 * Same as above except we set the source's interrupt level to zero, 198 * to disable the interrupt. 199 */ 200 201 void oss_irq_disable(int irq) { 202 #ifdef DEBUG_IRQUSE 203 printk("oss_irq_disable(%d)\n", irq); 204 #endif 205 switch(irq) { 206 case IRQ_MAC_SCC: 207 oss->irq_level[OSS_IOPSCC] = 0; 208 return; 209 case IRQ_MAC_ADB: 210 oss->irq_level[OSS_IOPISM] = 0; 211 return; 212 case IRQ_MAC_SCSI: 213 oss->irq_level[OSS_SCSI] = 0; 214 return; 215 case IRQ_NUBUS_9: 216 case IRQ_NUBUS_A: 217 case IRQ_NUBUS_B: 218 case IRQ_NUBUS_C: 219 case IRQ_NUBUS_D: 220 case IRQ_NUBUS_E: 221 irq -= NUBUS_SOURCE_BASE; 222 oss->irq_level[irq] = 0; 223 return; 224 } 225 226 if (IRQ_SRC(irq) == 1) 227 via_irq_disable(irq); 228 } 229