xref: /openbmc/linux/arch/m68k/mac/macints.c (revision 5d0e4d78)
1 /*
2  *	Macintosh interrupts
3  *
4  * General design:
5  * In contrary to the Amiga and Atari platforms, the Mac hardware seems to
6  * exclusively use the autovector interrupts (the 'generic level0-level7'
7  * interrupts with exception vectors 0x19-0x1f). The following interrupt levels
8  * are used:
9  *	1	- VIA1
10  *		  - slot 0: one second interrupt (CA2)
11  *		  - slot 1: VBlank (CA1)
12  *		  - slot 2: ADB data ready (SR full)
13  *		  - slot 3: ADB data  (CB2)
14  *		  - slot 4: ADB clock (CB1)
15  *		  - slot 5: timer 2
16  *		  - slot 6: timer 1
17  *		  - slot 7: status of IRQ; signals 'any enabled int.'
18  *
19  *	2	- VIA2 or RBV
20  *		  - slot 0: SCSI DRQ (CA2)
21  *		  - slot 1: NUBUS IRQ (CA1) need to read port A to find which
22  *		  - slot 2: /EXP IRQ (only on IIci)
23  *		  - slot 3: SCSI IRQ (CB2)
24  *		  - slot 4: ASC IRQ (CB1)
25  *		  - slot 5: timer 2 (not on IIci)
26  *		  - slot 6: timer 1 (not on IIci)
27  *		  - slot 7: status of IRQ; signals 'any enabled int.'
28  *
29  * Levels 3-6 vary by machine type. For VIA or RBV Macintoshes:
30  *
31  *	3	- unused (?)
32  *
33  *	4	- SCC
34  *
35  *	5	- unused (?)
36  *		  [serial errors or special conditions seem to raise level 6
37  *		  interrupts on some models (LC4xx?)]
38  *
39  *	6	- off switch (?)
40  *
41  * Machines with Quadra-like VIA hardware, except PSC and PMU machines, support
42  * an alternate interrupt mapping, as used by A/UX. It spreads ethernet and
43  * sound out to their own autovector IRQs and gives VIA1 a higher priority:
44  *
45  *	1	- unused (?)
46  *
47  *	3	- on-board SONIC
48  *
49  *	5	- Apple Sound Chip (ASC)
50  *
51  *	6	- VIA1
52  *
53  * For OSS Macintoshes (IIfx only), we apply an interrupt mapping similar to
54  * the Quadra (A/UX) mapping:
55  *
56  *	1	- ISM IOP (ADB)
57  *
58  *	2	- SCSI
59  *
60  *	3	- NuBus
61  *
62  *	4	- SCC IOP
63  *
64  *	6	- VIA1
65  *
66  * For PSC Macintoshes (660AV, 840AV):
67  *
68  *	3	- PSC level 3
69  *		  - slot 0: MACE
70  *
71  *	4	- PSC level 4
72  *		  - slot 1: SCC channel A interrupt
73  *		  - slot 2: SCC channel B interrupt
74  *		  - slot 3: MACE DMA
75  *
76  *	5	- PSC level 5
77  *
78  *	6	- PSC level 6
79  *
80  * Finally we have good 'ole level 7, the non-maskable interrupt:
81  *
82  *	7	- NMI (programmer's switch on the back of some Macs)
83  *		  Also RAM parity error on models which support it (IIc, IIfx?)
84  *
85  * The current interrupt logic looks something like this:
86  *
87  * - We install dispatchers for the autovector interrupts (1-7). These
88  *   dispatchers are responsible for querying the hardware (the
89  *   VIA/RBV/OSS/PSC chips) to determine the actual interrupt source. Using
90  *   this information a machspec interrupt number is generated by placing the
91  *   index of the interrupt hardware into the low three bits and the original
92  *   autovector interrupt number in the upper 5 bits. The handlers for the
93  *   resulting machspec interrupt are then called.
94  *
95  * - Nubus is a special case because its interrupts are hidden behind two
96  *   layers of hardware. Nubus interrupts come in as index 1 on VIA #2,
97  *   which translates to IRQ number 17. In this spot we install _another_
98  *   dispatcher. This dispatcher finds the interrupting slot number (9-F) and
99  *   then forms a new machspec interrupt number as above with the slot number
100  *   minus 9 in the low three bits and the pseudo-level 7 in the upper five
101  *   bits.  The handlers for this new machspec interrupt number are then
102  *   called. This puts Nubus interrupts into the range 56-62.
103  *
104  * - The Baboon interrupts (used on some PowerBooks) are an even more special
105  *   case. They're hidden behind the Nubus slot $C interrupt thus adding a
106  *   third layer of indirection. Why oh why did the Apple engineers do that?
107  *
108  */
109 
110 #include <linux/types.h>
111 #include <linux/kernel.h>
112 #include <linux/sched.h>
113 #include <linux/sched/debug.h>
114 #include <linux/interrupt.h>
115 #include <linux/irq.h>
116 #include <linux/delay.h>
117 
118 #include <asm/irq.h>
119 #include <asm/macintosh.h>
120 #include <asm/macints.h>
121 #include <asm/mac_via.h>
122 #include <asm/mac_psc.h>
123 #include <asm/mac_oss.h>
124 #include <asm/mac_iop.h>
125 #include <asm/mac_baboon.h>
126 #include <asm/hwtest.h>
127 #include <asm/irq_regs.h>
128 
129 extern void show_registers(struct pt_regs *);
130 
131 irqreturn_t mac_nmi_handler(int, void *);
132 
133 static unsigned int mac_irq_startup(struct irq_data *);
134 static void mac_irq_shutdown(struct irq_data *);
135 
136 static struct irq_chip mac_irq_chip = {
137 	.name		= "mac",
138 	.irq_enable	= mac_irq_enable,
139 	.irq_disable	= mac_irq_disable,
140 	.irq_startup	= mac_irq_startup,
141 	.irq_shutdown	= mac_irq_shutdown,
142 };
143 
144 void __init mac_init_IRQ(void)
145 {
146 	m68k_setup_irq_controller(&mac_irq_chip, handle_simple_irq, IRQ_USER,
147 				  NUM_MAC_SOURCES - IRQ_USER);
148 
149 	/*
150 	 * Now register the handlers for the master IRQ handlers
151 	 * at levels 1-7. Most of the work is done elsewhere.
152 	 */
153 
154 	if (oss_present)
155 		oss_register_interrupts();
156 	else
157 		via_register_interrupts();
158 	if (psc)
159 		psc_register_interrupts();
160 	if (baboon_present)
161 		baboon_register_interrupts();
162 	iop_register_interrupts();
163 	if (request_irq(IRQ_AUTO_7, mac_nmi_handler, 0, "NMI",
164 			mac_nmi_handler))
165 		pr_err("Couldn't register NMI\n");
166 }
167 
168 /*
169  *  mac_irq_enable - enable an interrupt source
170  * mac_irq_disable - disable an interrupt source
171  *
172  * These routines are just dispatchers to the VIA/OSS/PSC routines.
173  */
174 
175 void mac_irq_enable(struct irq_data *data)
176 {
177 	int irq = data->irq;
178 	int irq_src = IRQ_SRC(irq);
179 
180 	switch(irq_src) {
181 	case 1:
182 	case 2:
183 	case 7:
184 		if (oss_present)
185 			oss_irq_enable(irq);
186 		else
187 			via_irq_enable(irq);
188 		break;
189 	case 3:
190 	case 4:
191 	case 5:
192 	case 6:
193 		if (psc)
194 			psc_irq_enable(irq);
195 		else if (oss_present)
196 			oss_irq_enable(irq);
197 		break;
198 	case 8:
199 		if (baboon_present)
200 			baboon_irq_enable(irq);
201 		break;
202 	}
203 }
204 
205 void mac_irq_disable(struct irq_data *data)
206 {
207 	int irq = data->irq;
208 	int irq_src = IRQ_SRC(irq);
209 
210 	switch(irq_src) {
211 	case 1:
212 	case 2:
213 	case 7:
214 		if (oss_present)
215 			oss_irq_disable(irq);
216 		else
217 			via_irq_disable(irq);
218 		break;
219 	case 3:
220 	case 4:
221 	case 5:
222 	case 6:
223 		if (psc)
224 			psc_irq_disable(irq);
225 		else if (oss_present)
226 			oss_irq_disable(irq);
227 		break;
228 	case 8:
229 		if (baboon_present)
230 			baboon_irq_disable(irq);
231 		break;
232 	}
233 }
234 
235 static unsigned int mac_irq_startup(struct irq_data *data)
236 {
237 	int irq = data->irq;
238 
239 	if (IRQ_SRC(irq) == 7 && !oss_present)
240 		via_nubus_irq_startup(irq);
241 	else
242 		mac_irq_enable(data);
243 
244 	return 0;
245 }
246 
247 static void mac_irq_shutdown(struct irq_data *data)
248 {
249 	int irq = data->irq;
250 
251 	if (IRQ_SRC(irq) == 7 && !oss_present)
252 		via_nubus_irq_shutdown(irq);
253 	else
254 		mac_irq_disable(data);
255 }
256 
257 static volatile int in_nmi;
258 
259 irqreturn_t mac_nmi_handler(int irq, void *dev_id)
260 {
261 	if (in_nmi)
262 		return IRQ_HANDLED;
263 	in_nmi = 1;
264 
265 	pr_info("Non-Maskable Interrupt\n");
266 	show_registers(get_irq_regs());
267 
268 	in_nmi = 0;
269 	return IRQ_HANDLED;
270 }
271