xref: /openbmc/linux/arch/m68k/mac/macints.c (revision 16a1a66a)
1 /*
2  *	Macintosh interrupts
3  *
4  * General design:
5  * In contrary to the Amiga and Atari platforms, the Mac hardware seems to
6  * exclusively use the autovector interrupts (the 'generic level0-level7'
7  * interrupts with exception vectors 0x19-0x1f). The following interrupt levels
8  * are used:
9  *	1	- VIA1
10  *		  - slot 0: one second interrupt (CA2)
11  *		  - slot 1: VBlank (CA1)
12  *		  - slot 2: ADB data ready (SR full)
13  *		  - slot 3: ADB data  (CB2)
14  *		  - slot 4: ADB clock (CB1)
15  *		  - slot 5: timer 2
16  *		  - slot 6: timer 1
17  *		  - slot 7: status of IRQ; signals 'any enabled int.'
18  *
19  *	2	- VIA2 or RBV
20  *		  - slot 0: SCSI DRQ (CA2)
21  *		  - slot 1: NUBUS IRQ (CA1) need to read port A to find which
22  *		  - slot 2: /EXP IRQ (only on IIci)
23  *		  - slot 3: SCSI IRQ (CB2)
24  *		  - slot 4: ASC IRQ (CB1)
25  *		  - slot 5: timer 2 (not on IIci)
26  *		  - slot 6: timer 1 (not on IIci)
27  *		  - slot 7: status of IRQ; signals 'any enabled int.'
28  *
29  * Levels 3-6 vary by machine type. For VIA or RBV Macintoshes:
30  *
31  *	3	- unused (?)
32  *
33  *	4	- SCC
34  *
35  *	5	- unused (?)
36  *		  [serial errors or special conditions seem to raise level 6
37  *		  interrupts on some models (LC4xx?)]
38  *
39  *	6	- off switch (?)
40  *
41  * Machines with Quadra-like VIA hardware, except PSC and PMU machines, support
42  * an alternate interrupt mapping, as used by A/UX. It spreads ethernet and
43  * sound out to their own autovector IRQs and gives VIA1 a higher priority:
44  *
45  *	1	- unused (?)
46  *
47  *	3	- on-board SONIC
48  *
49  *	5	- Apple Sound Chip (ASC)
50  *
51  *	6	- VIA1
52  *
53  * For OSS Macintoshes (IIfx only), we apply an interrupt mapping similar to
54  * the Quadra (A/UX) mapping:
55  *
56  *	1	- ISM IOP (ADB)
57  *
58  *	2	- SCSI
59  *
60  *	3	- NuBus
61  *
62  *	4	- SCC IOP
63  *
64  *	6	- VIA1
65  *
66  * For PSC Macintoshes (660AV, 840AV):
67  *
68  *	3	- PSC level 3
69  *		  - slot 0: MACE
70  *
71  *	4	- PSC level 4
72  *		  - slot 1: SCC channel A interrupt
73  *		  - slot 2: SCC channel B interrupt
74  *		  - slot 3: MACE DMA
75  *
76  *	5	- PSC level 5
77  *
78  *	6	- PSC level 6
79  *
80  * Finally we have good 'ole level 7, the non-maskable interrupt:
81  *
82  *	7	- NMI (programmer's switch on the back of some Macs)
83  *		  Also RAM parity error on models which support it (IIc, IIfx?)
84  *
85  * The current interrupt logic looks something like this:
86  *
87  * - We install dispatchers for the autovector interrupts (1-7). These
88  *   dispatchers are responsible for querying the hardware (the
89  *   VIA/RBV/OSS/PSC chips) to determine the actual interrupt source. Using
90  *   this information a machspec interrupt number is generated by placing the
91  *   index of the interrupt hardware into the low three bits and the original
92  *   autovector interrupt number in the upper 5 bits. The handlers for the
93  *   resulting machspec interrupt are then called.
94  *
95  * - Nubus is a special case because its interrupts are hidden behind two
96  *   layers of hardware. Nubus interrupts come in as index 1 on VIA #2,
97  *   which translates to IRQ number 17. In this spot we install _another_
98  *   dispatcher. This dispatcher finds the interrupting slot number (9-F) and
99  *   then forms a new machspec interrupt number as above with the slot number
100  *   minus 9 in the low three bits and the pseudo-level 7 in the upper five
101  *   bits.  The handlers for this new machspec interrupt number are then
102  *   called. This puts Nubus interrupts into the range 56-62.
103  *
104  * - The Baboon interrupts (used on some PowerBooks) are an even more special
105  *   case. They're hidden behind the Nubus slot $C interrupt thus adding a
106  *   third layer of indirection. Why oh why did the Apple engineers do that?
107  *
108  */
109 
110 #include <linux/types.h>
111 #include <linux/kernel.h>
112 #include <linux/sched.h>
113 #include <linux/interrupt.h>
114 #include <linux/irq.h>
115 #include <linux/delay.h>
116 
117 #include <asm/irq.h>
118 #include <asm/macintosh.h>
119 #include <asm/macints.h>
120 #include <asm/mac_via.h>
121 #include <asm/mac_psc.h>
122 #include <asm/mac_oss.h>
123 #include <asm/mac_iop.h>
124 #include <asm/mac_baboon.h>
125 #include <asm/hwtest.h>
126 #include <asm/irq_regs.h>
127 
128 extern void show_registers(struct pt_regs *);
129 
130 irqreturn_t mac_nmi_handler(int, void *);
131 
132 static unsigned int mac_irq_startup(struct irq_data *);
133 static void mac_irq_shutdown(struct irq_data *);
134 
135 static struct irq_chip mac_irq_chip = {
136 	.name		= "mac",
137 	.irq_enable	= mac_irq_enable,
138 	.irq_disable	= mac_irq_disable,
139 	.irq_startup	= mac_irq_startup,
140 	.irq_shutdown	= mac_irq_shutdown,
141 };
142 
143 void __init mac_init_IRQ(void)
144 {
145 	m68k_setup_irq_controller(&mac_irq_chip, handle_simple_irq, IRQ_USER,
146 				  NUM_MAC_SOURCES - IRQ_USER);
147 
148 	/*
149 	 * Now register the handlers for the master IRQ handlers
150 	 * at levels 1-7. Most of the work is done elsewhere.
151 	 */
152 
153 	if (oss_present)
154 		oss_register_interrupts();
155 	else
156 		via_register_interrupts();
157 	if (psc)
158 		psc_register_interrupts();
159 	if (baboon_present)
160 		baboon_register_interrupts();
161 	iop_register_interrupts();
162 	if (request_irq(IRQ_AUTO_7, mac_nmi_handler, 0, "NMI",
163 			mac_nmi_handler))
164 		pr_err("Couldn't register NMI\n");
165 }
166 
167 /*
168  *  mac_irq_enable - enable an interrupt source
169  * mac_irq_disable - disable an interrupt source
170  *
171  * These routines are just dispatchers to the VIA/OSS/PSC routines.
172  */
173 
174 void mac_irq_enable(struct irq_data *data)
175 {
176 	int irq = data->irq;
177 	int irq_src = IRQ_SRC(irq);
178 
179 	switch(irq_src) {
180 	case 1:
181 	case 2:
182 	case 7:
183 		if (oss_present)
184 			oss_irq_enable(irq);
185 		else
186 			via_irq_enable(irq);
187 		break;
188 	case 3:
189 	case 4:
190 	case 5:
191 	case 6:
192 		if (psc)
193 			psc_irq_enable(irq);
194 		else if (oss_present)
195 			oss_irq_enable(irq);
196 		break;
197 	case 8:
198 		if (baboon_present)
199 			baboon_irq_enable(irq);
200 		break;
201 	}
202 }
203 
204 void mac_irq_disable(struct irq_data *data)
205 {
206 	int irq = data->irq;
207 	int irq_src = IRQ_SRC(irq);
208 
209 	switch(irq_src) {
210 	case 1:
211 	case 2:
212 	case 7:
213 		if (oss_present)
214 			oss_irq_disable(irq);
215 		else
216 			via_irq_disable(irq);
217 		break;
218 	case 3:
219 	case 4:
220 	case 5:
221 	case 6:
222 		if (psc)
223 			psc_irq_disable(irq);
224 		else if (oss_present)
225 			oss_irq_disable(irq);
226 		break;
227 	case 8:
228 		if (baboon_present)
229 			baboon_irq_disable(irq);
230 		break;
231 	}
232 }
233 
234 static unsigned int mac_irq_startup(struct irq_data *data)
235 {
236 	int irq = data->irq;
237 
238 	if (IRQ_SRC(irq) == 7 && !oss_present)
239 		via_nubus_irq_startup(irq);
240 	else
241 		mac_irq_enable(data);
242 
243 	return 0;
244 }
245 
246 static void mac_irq_shutdown(struct irq_data *data)
247 {
248 	int irq = data->irq;
249 
250 	if (IRQ_SRC(irq) == 7 && !oss_present)
251 		via_nubus_irq_shutdown(irq);
252 	else
253 		mac_irq_disable(data);
254 }
255 
256 static volatile int in_nmi;
257 
258 irqreturn_t mac_nmi_handler(int irq, void *dev_id)
259 {
260 	if (in_nmi)
261 		return IRQ_HANDLED;
262 	in_nmi = 1;
263 
264 	pr_info("Non-Maskable Interrupt\n");
265 	show_registers(get_irq_regs());
266 
267 	in_nmi = 0;
268 	return IRQ_HANDLED;
269 }
270