1/* SPDX-License-Identifier: GPL-2.0 */ 2#include <linux/linkage.h> 3#include <linux/init.h> 4 5#include <asm/entry.h> 6#include <asm/page.h> 7#include <asm/contregs.h> 8#include <asm/sun3-head.h> 9 10PSL_HIGHIPL = 0x2700 11NBSG = 0x20000 12ICACHE_ONLY = 0x00000009 13CACHES_OFF = 0x00000008 | actually a clear and disable --m 14#define MAS_STACK INT_STACK 15ROOT_TABLE_SIZE = 128 16PAGESIZE = 8192 17SUN3_INVALID_PMEG = 255 18.globl bootup_user_stack 19.globl bootup_kernel_stack 20.globl pg0 21.globl swapper_pg_dir 22.globl kernel_pmd_table 23.globl availmem 24.global m68k_pgtable_cachemode 25.global kpt 26| todo: all these should be in bss! 27swapper_pg_dir: .skip 0x2000 28pg0: .skip 0x2000 29kernel_pmd_table: .skip 0x2000 30 31.globl kernel_pg_dir 32.equ kernel_pg_dir,kernel_pmd_table 33 34 __HEAD 35ENTRY(_stext) 36ENTRY(_start) 37 38/* Firstly, disable interrupts and set up function codes. */ 39 movew #PSL_HIGHIPL, %sr 40 moveq #FC_CONTROL, %d0 41 movec %d0, %sfc 42 movec %d0, %dfc 43 44/* Make sure we're in context zero. */ 45 moveq #0, %d0 46 movsb %d0, AC_CONTEXT 47 48/* map everything the bootloader left us into high memory, clean up the 49 excess later */ 50 lea (AC_SEGMAP+0),%a0 51 lea (AC_SEGMAP+KERNBASE),%a1 521: 53 movsb %a0@, %d1 54 movsb %d1, %a1@ 55 cmpib #SUN3_INVALID_PMEG, %d1 56 beq 2f 57 addl #NBSG,%a0 58 addl #NBSG,%a1 59 jmp 1b 60 612: 62 63/* Disable caches and jump to high code. */ 64 moveq #ICACHE_ONLY,%d0 | Cache disabled until we're ready to enable it 65 movc %d0, %cacr | is this the right value? (yes --m) 66 jmp 1f:l 67 68/* Following code executes at high addresses (0xE000xxx). */ 691: lea init_task,%curptr | get initial thread... 70 lea init_thread_union+THREAD_SIZE,%sp | ...and its stack. 71 72/* Point MSP at an invalid page to trap if it's used. --m */ 73 movl #(PAGESIZE),%d0 74 movc %d0,%msp 75 moveq #-1,%d0 76 movsb %d0,(AC_SEGMAP+0x0) 77 78 jbsr sun3_init 79 80 jbsr base_trap_init 81 82 jbsr start_kernel 83 trap #15 84 85 .data 86 .even 87kpt: 88 .long 0 89availmem: 90 .long 0 91