1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /****************************************************************************/ 3 4 /* 5 * mcfuart.h -- ColdFire internal UART support defines. 6 * 7 * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com) 8 * (C) Copyright 2000, Lineo Inc. (www.lineo.com) 9 */ 10 11 /****************************************************************************/ 12 #ifndef mcfuart_h 13 #define mcfuart_h 14 /****************************************************************************/ 15 16 #include <linux/serial_core.h> 17 #include <linux/platform_device.h> 18 19 struct mcf_platform_uart { 20 unsigned long mapbase; /* Physical address base */ 21 void __iomem *membase; /* Virtual address if mapped */ 22 unsigned int irq; /* Interrupt vector */ 23 unsigned int uartclk; /* UART clock rate */ 24 }; 25 26 /* 27 * Define the ColdFire UART register set addresses. 28 */ 29 #define MCFUART_UMR 0x00 /* Mode register (r/w) */ 30 #define MCFUART_USR 0x04 /* Status register (r) */ 31 #define MCFUART_UCSR 0x04 /* Clock Select (w) */ 32 #define MCFUART_UCR 0x08 /* Command register (w) */ 33 #define MCFUART_URB 0x0c /* Receiver Buffer (r) */ 34 #define MCFUART_UTB 0x0c /* Transmit Buffer (w) */ 35 #define MCFUART_UIPCR 0x10 /* Input Port Change (r) */ 36 #define MCFUART_UACR 0x10 /* Auxiliary Control (w) */ 37 #define MCFUART_UISR 0x14 /* Interrupt Status (r) */ 38 #define MCFUART_UIMR 0x14 /* Interrupt Mask (w) */ 39 #define MCFUART_UBG1 0x18 /* Baud Rate MSB (r/w) */ 40 #define MCFUART_UBG2 0x1c /* Baud Rate LSB (r/w) */ 41 #ifdef CONFIG_M5272 42 #define MCFUART_UTF 0x28 /* Transmitter FIFO (r/w) */ 43 #define MCFUART_URF 0x2c /* Receiver FIFO (r/w) */ 44 #define MCFUART_UFPD 0x30 /* Frac Prec. Divider (r/w) */ 45 #endif 46 #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ 47 defined(CONFIG_M5249) || defined(CONFIG_M525x) || \ 48 defined(CONFIG_M5307) || defined(CONFIG_M5407) 49 #define MCFUART_UIVR 0x30 /* Interrupt Vector (r/w) */ 50 #endif 51 #define MCFUART_UIPR 0x34 /* Input Port (r) */ 52 #define MCFUART_UOP1 0x38 /* Output Port Bit Set (w) */ 53 #define MCFUART_UOP0 0x3c /* Output Port Bit Reset (w) */ 54 55 56 /* 57 * Define bit flags in Mode Register 1 (MR1). 58 */ 59 #define MCFUART_MR1_RXRTS 0x80 /* Auto RTS flow control */ 60 #define MCFUART_MR1_RXIRQFULL 0x40 /* RX IRQ type FULL */ 61 #define MCFUART_MR1_RXIRQRDY 0x00 /* RX IRQ type RDY */ 62 #define MCFUART_MR1_RXERRBLOCK 0x20 /* RX block error mode */ 63 #define MCFUART_MR1_RXERRCHAR 0x00 /* RX char error mode */ 64 65 #define MCFUART_MR1_PARITYNONE 0x10 /* No parity */ 66 #define MCFUART_MR1_PARITYEVEN 0x00 /* Even parity */ 67 #define MCFUART_MR1_PARITYODD 0x04 /* Odd parity */ 68 #define MCFUART_MR1_PARITYSPACE 0x08 /* Space parity */ 69 #define MCFUART_MR1_PARITYMARK 0x0c /* Mark parity */ 70 71 #define MCFUART_MR1_CS5 0x00 /* 5 bits per char */ 72 #define MCFUART_MR1_CS6 0x01 /* 6 bits per char */ 73 #define MCFUART_MR1_CS7 0x02 /* 7 bits per char */ 74 #define MCFUART_MR1_CS8 0x03 /* 8 bits per char */ 75 76 /* 77 * Define bit flags in Mode Register 2 (MR2). 78 */ 79 #define MCFUART_MR2_LOOPBACK 0x80 /* Loopback mode */ 80 #define MCFUART_MR2_REMOTELOOP 0xc0 /* Remote loopback mode */ 81 #define MCFUART_MR2_AUTOECHO 0x40 /* Automatic echo */ 82 #define MCFUART_MR2_TXRTS 0x20 /* Assert RTS on TX */ 83 #define MCFUART_MR2_TXCTS 0x10 /* Auto CTS flow control */ 84 85 #define MCFUART_MR2_STOP1 0x07 /* 1 stop bit */ 86 #define MCFUART_MR2_STOP15 0x08 /* 1.5 stop bits */ 87 #define MCFUART_MR2_STOP2 0x0f /* 2 stop bits */ 88 89 /* 90 * Define bit flags in Status Register (USR). 91 */ 92 #define MCFUART_USR_RXBREAK 0x80 /* Received BREAK */ 93 #define MCFUART_USR_RXFRAMING 0x40 /* Received framing error */ 94 #define MCFUART_USR_RXPARITY 0x20 /* Received parity error */ 95 #define MCFUART_USR_RXOVERRUN 0x10 /* Received overrun error */ 96 #define MCFUART_USR_TXEMPTY 0x08 /* Transmitter empty */ 97 #define MCFUART_USR_TXREADY 0x04 /* Transmitter ready */ 98 #define MCFUART_USR_RXFULL 0x02 /* Receiver full */ 99 #define MCFUART_USR_RXREADY 0x01 /* Receiver ready */ 100 101 #define MCFUART_USR_RXERR (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \ 102 MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN) 103 104 /* 105 * Define bit flags in Clock Select Register (UCSR). 106 */ 107 #define MCFUART_UCSR_RXCLKTIMER 0xd0 /* RX clock is timer */ 108 #define MCFUART_UCSR_RXCLKEXT16 0xe0 /* RX clock is external x16 */ 109 #define MCFUART_UCSR_RXCLKEXT1 0xf0 /* RX clock is external x1 */ 110 111 #define MCFUART_UCSR_TXCLKTIMER 0x0d /* TX clock is timer */ 112 #define MCFUART_UCSR_TXCLKEXT16 0x0e /* TX clock is external x16 */ 113 #define MCFUART_UCSR_TXCLKEXT1 0x0f /* TX clock is external x1 */ 114 115 /* 116 * Define bit flags in Command Register (UCR). 117 */ 118 #define MCFUART_UCR_CMDNULL 0x00 /* No command */ 119 #define MCFUART_UCR_CMDRESETMRPTR 0x10 /* Reset MR pointer */ 120 #define MCFUART_UCR_CMDRESETRX 0x20 /* Reset receiver */ 121 #define MCFUART_UCR_CMDRESETTX 0x30 /* Reset transmitter */ 122 #define MCFUART_UCR_CMDRESETERR 0x40 /* Reset error status */ 123 #define MCFUART_UCR_CMDRESETBREAK 0x50 /* Reset BREAK change */ 124 #define MCFUART_UCR_CMDBREAKSTART 0x60 /* Start BREAK */ 125 #define MCFUART_UCR_CMDBREAKSTOP 0x70 /* Stop BREAK */ 126 127 #define MCFUART_UCR_TXNULL 0x00 /* No TX command */ 128 #define MCFUART_UCR_TXENABLE 0x04 /* Enable TX */ 129 #define MCFUART_UCR_TXDISABLE 0x08 /* Disable TX */ 130 #define MCFUART_UCR_RXNULL 0x00 /* No RX command */ 131 #define MCFUART_UCR_RXENABLE 0x01 /* Enable RX */ 132 #define MCFUART_UCR_RXDISABLE 0x02 /* Disable RX */ 133 134 /* 135 * Define bit flags in Input Port Change Register (UIPCR). 136 */ 137 #define MCFUART_UIPCR_CTSCOS 0x10 /* CTS change of state */ 138 #define MCFUART_UIPCR_CTS 0x01 /* CTS value */ 139 140 /* 141 * Define bit flags in Input Port Register (UIP). 142 */ 143 #define MCFUART_UIPR_CTS 0x01 /* CTS value */ 144 145 /* 146 * Define bit flags in Output Port Registers (UOP). 147 * Clear bit by writing to UOP0, set by writing to UOP1. 148 */ 149 #define MCFUART_UOP_RTS 0x01 /* RTS set or clear */ 150 151 /* 152 * Define bit flags in the Auxiliary Control Register (UACR). 153 */ 154 #define MCFUART_UACR_IEC 0x01 /* Input enable control */ 155 156 /* 157 * Define bit flags in Interrupt Status Register (UISR). 158 * These same bits are used for the Interrupt Mask Register (UIMR). 159 */ 160 #define MCFUART_UIR_COS 0x80 /* Change of state (CTS) */ 161 #define MCFUART_UIR_DELTABREAK 0x04 /* Break start or stop */ 162 #define MCFUART_UIR_RXREADY 0x02 /* Receiver ready */ 163 #define MCFUART_UIR_TXREADY 0x01 /* Transmitter ready */ 164 165 #ifdef CONFIG_M5272 166 /* 167 * Define bit flags in the Transmitter FIFO Register (UTF). 168 */ 169 #define MCFUART_UTF_TXB 0x1f /* Transmitter data level */ 170 #define MCFUART_UTF_FULL 0x20 /* Transmitter fifo full */ 171 #define MCFUART_UTF_TXS 0xc0 /* Transmitter status */ 172 173 /* 174 * Define bit flags in the Receiver FIFO Register (URF). 175 */ 176 #define MCFUART_URF_RXB 0x1f /* Receiver data level */ 177 #define MCFUART_URF_FULL 0x20 /* Receiver fifo full */ 178 #define MCFUART_URF_RXS 0xc0 /* Receiver status */ 179 #endif 180 181 #if defined(CONFIG_M54xx) 182 #define MCFUART_TXFIFOSIZE 512 183 #elif defined(CONFIG_M5272) 184 #define MCFUART_TXFIFOSIZE 25 185 #else 186 #define MCFUART_TXFIFOSIZE 1 187 #endif 188 /****************************************************************************/ 189 #endif /* mcfuart_h */ 190