xref: /openbmc/linux/arch/m68k/include/asm/mcfqspi.h (revision 3b2039b2)
1 /*
2  * Definitions for Freescale Coldfire QSPI module
3  *
4  * Copyright 2010 Steven King <sfking@fdwdc.com>
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2
8  * as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License along
16  * with this program; if not, write to the Free Software Foundation, Inc.,
17  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
18  *
19 */
20 
21 #ifndef mcfqspi_h
22 #define mcfqspi_h
23 
24 #if defined(CONFIG_M532x)
25 #define MCFQSPI_IOBASE         0xFC058000
26 #endif
27 #define MCFQSPI_IOSIZE		0x40
28 
29 /**
30  * struct mcfqspi_cs_control - chip select control for the coldfire qspi driver
31  * @setup: setup the control; allocate gpio's, etc. May be NULL.
32  * @teardown: finish with the control; free gpio's, etc. May be NULL.
33  * @select: output the signals to select the device.  Can not be NULL.
34  * @deselect: output the signals to deselect the device. Can not be NULL.
35  *
36  * The QSPI module has 4 hardware chip selects.  We don't use them.  Instead
37  * platforms are required to supply a mcfqspi_cs_control as a part of the
38  * platform data for each QSPI master controller.  Only the select and
39  * deselect functions are required.
40 */
41 struct mcfqspi_cs_control {
42 	int 	(*setup)(struct mcfqspi_cs_control *);
43 	void	(*teardown)(struct mcfqspi_cs_control *);
44 	void	(*select)(struct mcfqspi_cs_control *, u8, bool);
45 	void	(*deselect)(struct mcfqspi_cs_control *, u8, bool);
46 };
47 
48 /**
49  * struct mcfqspi_platform_data - platform data for the coldfire qspi driver
50  * @bus_num: board specific identifier for this qspi driver.
51  * @num_chipselects: number of chip selects supported by this qspi driver.
52  * @cs_control: platform dependent chip select control.
53 */
54 struct mcfqspi_platform_data {
55 	s16	bus_num;
56 	u16	num_chipselect;
57 	struct mcfqspi_cs_control *cs_control;
58 };
59 
60 #endif /* mcfqspi_h */
61