xref: /openbmc/linux/arch/m68k/include/asm/m54xxsim.h (revision 4da722ca)
1 /*
2  *	m54xxsim.h -- ColdFire 547x/548x System Integration Unit support.
3  */
4 
5 #ifndef	m54xxsim_h
6 #define m54xxsim_h
7 
8 #define	CPU_NAME		"COLDFIRE(m54xx)"
9 #define	CPU_INSTR_PER_JIFFY	2
10 #define	MCF_BUSCLK		(MCF_CLK / 2)
11 #define	MACHINE			MACH_M54XX
12 #define	FPUTYPE			FPU_COLDFIRE
13 #define	IOMEMBASE		MCF_MBAR
14 #define	IOMEMSIZE		0x01000000
15 
16 #include <asm/m54xxacr.h>
17 
18 #define MCFINT_VECBASE		64
19 
20 /*
21  *      Interrupt Controller Registers
22  */
23 #define MCFICM_INTC0		(MCF_MBAR + 0x700) 	/* Base for Interrupt Ctrl 0 */
24 
25 #define MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
26 #define MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
27 #define MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
28 #define MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
29 #define MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
30 #define MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
31 #define MCFINTC_IRLR		0x18		/* */
32 #define MCFINTC_IACKL		0x19		/* */
33 #define MCFINTC_ICR0		0x40		/* Base ICR register */
34 
35 /*
36  *	UART module.
37  */
38 #define MCFUART_BASE0		(MCF_MBAR + 0x8600)	/* Base address UART0 */
39 #define MCFUART_BASE1		(MCF_MBAR + 0x8700)	/* Base address UART1 */
40 #define MCFUART_BASE2		(MCF_MBAR + 0x8800)	/* Base address UART2 */
41 #define MCFUART_BASE3		(MCF_MBAR + 0x8900)	/* Base address UART3 */
42 
43 /*
44  *	Define system peripheral IRQ usage.
45  */
46 #define MCF_IRQ_TIMER		(MCFINT_VECBASE + 54)	/* Slice Timer 0 */
47 #define MCF_IRQ_PROFILER	(MCFINT_VECBASE + 53)	/* Slice Timer 1 */
48 #define MCF_IRQ_I2C0		(MCFINT_VECBASE + 40)
49 #define MCF_IRQ_UART0		(MCFINT_VECBASE + 35)
50 #define MCF_IRQ_UART1		(MCFINT_VECBASE + 34)
51 #define MCF_IRQ_UART2		(MCFINT_VECBASE + 33)
52 #define MCF_IRQ_UART3		(MCFINT_VECBASE + 32)
53 
54 /*
55  *	Slice Timer support.
56  */
57 #define MCFSLT_TIMER0		(MCF_MBAR + 0x900)	/* Base addr TIMER0 */
58 #define MCFSLT_TIMER1		(MCF_MBAR + 0x910)	/* Base addr TIMER1 */
59 
60 /*
61  *	Generic GPIO support
62  */
63 #define MCFGPIO_PODR		(MCF_MBAR + 0xA00)
64 #define MCFGPIO_PDDR		(MCF_MBAR + 0xA10)
65 #define MCFGPIO_PPDR		(MCF_MBAR + 0xA20)
66 #define MCFGPIO_SETR		(MCF_MBAR + 0xA20)
67 #define MCFGPIO_CLRR		(MCF_MBAR + 0xA30)
68 
69 #define MCFGPIO_PIN_MAX		136	/* 128 gpio + 8 eport */
70 #define MCFGPIO_IRQ_MAX		8
71 #define MCFGPIO_IRQ_VECBASE	MCFINT_VECBASE
72 
73 /*
74  *	EDGE Port support.
75  */
76 #define	MCFEPORT_EPPAR		(MCF_MBAR + 0xf00)	/* Pin assignment */
77 #define	MCFEPORT_EPDDR		(MCF_MBAR + 0xf04)	/* Data direction */
78 #define	MCFEPORT_EPIER		(MCF_MBAR + 0xf05)	/* Interrupt enable */
79 #define	MCFEPORT_EPDR		(MCF_MBAR + 0xf08)	/* Port data (w) */
80 #define	MCFEPORT_EPPDR		(MCF_MBAR + 0xf09)	/* Port data (r) */
81 #define	MCFEPORT_EPFR		(MCF_MBAR + 0xf0c)	/* Flags */
82 
83 /*
84  *	Pin Assignment register definitions
85  */
86 #define MCFGPIO_PAR_FBCTL	(MCF_MBAR + 0xA40)
87 #define MCFGPIO_PAR_FBCS	(MCF_MBAR + 0xA42)
88 #define MCFGPIO_PAR_DMA		(MCF_MBAR + 0xA43)
89 #define MCFGPIO_PAR_FECI2CIRQ	(MCF_MBAR + 0xA44)
90 #define MCFGPIO_PAR_PCIBG	(MCF_MBAR + 0xA48)	/* PCI bus grant */
91 #define MCFGPIO_PAR_PCIBR	(MCF_MBAR + 0xA4A)	/* PCI */
92 #define MCFGPIO_PAR_PSC0	(MCF_MBAR + 0xA4F)
93 #define MCFGPIO_PAR_PSC1	(MCF_MBAR + 0xA4E)
94 #define MCFGPIO_PAR_PSC2	(MCF_MBAR + 0xA4D)
95 #define MCFGPIO_PAR_PSC3	(MCF_MBAR + 0xA4C)
96 #define MCFGPIO_PAR_DSPI	(MCF_MBAR + 0xA50)
97 #define MCFGPIO_PAR_TIMER	(MCF_MBAR + 0xA52)
98 
99 #define MCF_PAR_SDA		(0x0008)
100 #define MCF_PAR_SCL		(0x0004)
101 #define MCF_PAR_PSC_TXD		(0x04)
102 #define MCF_PAR_PSC_RXD		(0x08)
103 #define MCF_PAR_PSC_CTS_GPIO	(0x00)
104 #define MCF_PAR_PSC_CTS_BCLK	(0x80)
105 #define MCF_PAR_PSC_CTS_CTS	(0xC0)
106 #define MCF_PAR_PSC_RTS_GPIO    (0x00)
107 #define MCF_PAR_PSC_RTS_FSYNC	(0x20)
108 #define MCF_PAR_PSC_RTS_RTS	(0x30)
109 #define MCF_PAR_PSC_CANRX	(0x40)
110 
111 #define MCF_PAR_FECI2CIRQ	(MCF_MBAR + 0x00000a44)	/* FEC/I2C/IRQ */
112 #define MCF_PAR_FECI2CIRQ_SDA	(1 << 3)
113 #define MCF_PAR_FECI2CIRQ_SCL	(1 << 2)
114 
115 /*
116  * I2C module.
117  */
118 #define MCFI2C_BASE0		(MCF_MBAR + 0x8f00)
119 #define MCFI2C_SIZE0		0x40
120 
121 #endif	/* m54xxsim_h */
122