1 /* 2 * Bit definitions for the MCF54xx ACR and CACR registers. 3 */ 4 5 #ifndef m54xxacr_h 6 #define m54xxacr_h 7 8 /* 9 * Define the Cache register flags. 10 */ 11 #define CACR_DEC 0x80000000 /* Enable data cache */ 12 #define CACR_DWP 0x40000000 /* Data write protection */ 13 #define CACR_DESB 0x20000000 /* Enable data store buffer */ 14 #define CACR_DDPI 0x10000000 /* Disable invalidation by CPUSHL */ 15 #define CACR_DHCLK 0x08000000 /* Half data cache lock mode */ 16 #define CACR_DDCM_WT 0x00000000 /* Write through cache*/ 17 #define CACR_DDCM_CP 0x02000000 /* Copyback cache */ 18 #define CACR_DDCM_P 0x04000000 /* No cache, precise */ 19 #define CACR_DDCM_IMP 0x06000000 /* No cache, imprecise */ 20 #define CACR_DCINVA 0x01000000 /* Invalidate data cache */ 21 #define CACR_BEC 0x00080000 /* Enable branch cache */ 22 #define CACR_BCINVA 0x00040000 /* Invalidate branch cache */ 23 #define CACR_IEC 0x00008000 /* Enable instruction cache */ 24 #define CACR_DNFB 0x00002000 /* Inhibited fill buffer */ 25 #define CACR_IDPI 0x00001000 /* Disable CPUSHL */ 26 #define CACR_IHLCK 0x00000800 /* Intruction cache half lock */ 27 #define CACR_IDCM 0x00000400 /* Intruction cache inhibit */ 28 #define CACR_ICINVA 0x00000100 /* Invalidate instr cache */ 29 #define CACR_EUSP 0x00000020 /* Enable separate user a7 */ 30 31 #define ACR_BASE_POS 24 /* Address Base */ 32 #define ACR_MASK_POS 16 /* Address Mask */ 33 #define ACR_ENABLE 0x00008000 /* Enable address */ 34 #define ACR_USER 0x00000000 /* User mode access only */ 35 #define ACR_SUPER 0x00002000 /* Supervisor mode only */ 36 #define ACR_ANY 0x00004000 /* Match any access mode */ 37 #define ACR_CM_WT 0x00000000 /* Write through mode */ 38 #define ACR_CM_CP 0x00000020 /* Copyback mode */ 39 #define ACR_CM_OFF_PRE 0x00000040 /* No cache, precise */ 40 #define ACR_CM_OFF_IMP 0x00000060 /* No cache, imprecise */ 41 #define ACR_CM 0x00000060 /* Cache mode mask */ 42 #define ACR_SP 0x00000008 /* Supervisor protect */ 43 #define ACR_WPROTECT 0x00000004 /* Write protect */ 44 45 #define ACR_BA(x) ((x) & 0xff000000) 46 #define ACR_ADMSK(x) ((((x) - 1) & 0xff000000) >> 8) 47 48 #if defined(CONFIG_M5407) 49 50 #define ICACHE_SIZE 0x4000 /* instruction - 16k */ 51 #define DCACHE_SIZE 0x2000 /* data - 8k */ 52 53 #elif defined(CONFIG_M54xx) 54 55 #define ICACHE_SIZE 0x8000 /* instruction - 32k */ 56 #define DCACHE_SIZE 0x8000 /* data - 32k */ 57 58 #elif defined(CONFIG_M5441x) 59 60 #define ICACHE_SIZE 0x2000 /* instruction - 8k */ 61 #define DCACHE_SIZE 0x2000 /* data - 8k */ 62 #endif 63 64 #define CACHE_LINE_SIZE 0x0010 /* 16 bytes */ 65 #define CACHE_WAYS 4 /* 4 ways */ 66 67 #define ICACHE_SET_MASK ((ICACHE_SIZE / 64 - 1) << CACHE_WAYS) 68 #define DCACHE_SET_MASK ((DCACHE_SIZE / 64 - 1) << CACHE_WAYS) 69 #define ICACHE_MAX_ADDR ICACHE_SET_MASK 70 #define DCACHE_MAX_ADDR DCACHE_SET_MASK 71 72 /* 73 * Version 4 cores have a true harvard style separate instruction 74 * and data cache. Enable data and instruction caches, also enable write 75 * buffers and branch accelerator. 76 */ 77 /* attention : enabling CACR_DESB requires a "nop" to flush the store buffer */ 78 /* use '+' instead of '|' for assembler's sake */ 79 80 /* Enable data cache */ 81 /* Enable data store buffer */ 82 /* outside ACRs : No cache, precise */ 83 /* Enable instruction+branch caches */ 84 #if defined(CONFIG_M5407) 85 #define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC) 86 #else 87 #define CACHE_MODE (CACR_DEC+CACR_DESB+CACR_DDCM_P+CACR_BEC+CACR_IEC+CACR_EUSP) 88 #endif 89 #define CACHE_INIT (CACR_DCINVA+CACR_BCINVA+CACR_ICINVA) 90 91 #if defined(CONFIG_MMU) 92 /* 93 * If running with the MMU enabled then we need to map the internal 94 * register region as non-cacheable. And then we map all our RAM as 95 * cacheable and supervisor access only. 96 */ 97 #define ACR0_MODE (ACR_BA(CONFIG_MBAR)+ACR_ADMSK(0x1000000)+ \ 98 ACR_ENABLE+ACR_SUPER+ACR_CM_OFF_PRE+ACR_SP) 99 #if defined(CONFIG_CACHE_COPYBACK) 100 #define ACR1_MODE (ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \ 101 ACR_ENABLE+ACR_SUPER+ACR_SP+ACR_CM_CP) 102 #else 103 #define ACR1_MODE (ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \ 104 ACR_ENABLE+ACR_SUPER+ACR_SP+ACR_CM_WT) 105 #endif 106 #define ACR2_MODE 0 107 #define ACR3_MODE (ACR_BA(CONFIG_RAMBASE)+ACR_ADMSK(CONFIG_RAMSIZE)+ \ 108 ACR_ENABLE+ACR_SUPER+ACR_SP) 109 110 #else 111 112 /* 113 * For the non-MMU enabled case we map all of RAM as cacheable. 114 */ 115 #if defined(CONFIG_CACHE_COPYBACK) 116 #define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_CP) 117 #else 118 #define DATA_CACHE_MODE (ACR_ENABLE+ACR_ANY+ACR_CM_WT) 119 #endif 120 #define INSN_CACHE_MODE (ACR_ENABLE+ACR_ANY) 121 122 #define CACHE_INVALIDATE (CACHE_MODE+CACR_DCINVA+CACR_BCINVA+CACR_ICINVA) 123 #define CACHE_INVALIDATEI (CACHE_MODE+CACR_BCINVA+CACR_ICINVA) 124 #define CACHE_INVALIDATED (CACHE_MODE+CACR_DCINVA) 125 #define ACR0_MODE (0x000f0000+DATA_CACHE_MODE) 126 #define ACR1_MODE 0 127 #define ACR2_MODE (0x000f0000+INSN_CACHE_MODE) 128 #define ACR3_MODE 0 129 130 #if ((DATA_CACHE_MODE & ACR_CM) == ACR_CM_CP) 131 /* Copyback cache mode must push dirty cache lines first */ 132 #define CACHE_PUSH 133 #endif 134 135 #endif /* CONFIG_MMU */ 136 #endif /* m54xxacr_h */ 137